I am trying to install the build-essential package on my new Jaunty install, but I seem to get 404 Not Found for all the repositories. I have tried main repositories, US ones and the ones recommended in Software Sources as being the best choice, but I get the same response. I can't install any packages because of this. Could someone help me find the repositories for this distro?
View 9 Repliesdone 11.4 update from DVD on my two laptops and I'm trying to do my home machine now.Problem is that the DVD update does not find any repos. I told the update system to set up wired network using DHCP and everything seems OK, when I check the box to use separate media during installation the system won't find any community repositories and when I specify URL it simlply won't connect to the repo. As for as I can tell there is a connection to the internet, but maybe not
View 2 Replies View RelatedAfter install I tried to add firefox but it wasn't found in any of the repositories. I thought it was supposed to be in there. Thunderbird also wasn't. What repositories do you guys add after install?
View 3 Replies View RelatedI am meeting some problems on my opensuse 11.2 system in the last week, I see an higher load on CPU and the system seems to swap a lot of time. Checking on dmesg I found that at boot time I have a lot of errors: I paste a little part of the full log at the end of this post
If I am not wrong I have found and installed an official opensuse 11.2 kernel update through zypper some days ago Moreover, actually I am not able to use yast package manager because it seems to crash during repositories refresh (or just after it)
[Code]...
Ubuntu Server Edition, 32bit, fresh install today (2011.07.07). Usually the first thing thing I do after a server install, I update, upgrade... then install Emacs to configure services. I can get to it from my other servers and PC's, have an internet connections from that server // so I know things should be okay...
I'm thinking maybe it's a repo problem in my source list... and I'm not sure what repo Emacs is from. I'd like to check this, before doing a reinstall on this. I had just added in the mounts & fstabs on my data RAID arays... Would be more work, but still not too far into it.
I am attempting to install some applications on Debian 8 Jessie, with Gnome Desktop, and every package I try to install keeps coming up with the error E: Package Not found, I have been searching then trying for a solution on the Web, which includes apt-get update, and there are none for Debian 8 at all.
View 14 Replies View RelatedWhen the automatic update begins, fails displaying the message:
A package dependency could not be found.
More information is available in the detailed report.
Details >>
cron-4.2-9.17.1.i586 requires cronie = 1.4.6-, but this requirement cannot be provided
I went to software download, I downloaded and installed crownie 1.4.6, but still the same thing
I'm having some problems getting the GUI installed in my Server 10.04 installation.
I've installed the Ubuntu server 10.04 32bit with a VMWare player on a Windows XP Pro host. Everything seems to have gone ok but at the end of the install it said that VMWare items are being installed and while that happens I can only use the terminal mode or I could wait for the GUI to load. Well the GUI never loaded so I logged in through the terminal.
I realized immediately that I'm over my head as I'm more familiar with DOS rather than bash or the terminal commands of Ubuntu. So I tried to look up on the internet (from my host machine) on how to start or install the GUI interface for the server. I've found lots of things that show commands like:
sudo apt-get install gnome gdm
or
sudo aptitude install gnome-core
but in all cases I get a message that the package is not found. So I'm wondering how do I find the package so that I can install this?
I would like to install svn, but I am unable to install. sudo apt-get update gives me :
Ign file: eeepc Release.gpg
Ign file:/home/user/packages/ eeepc/main Translation-en
Ign file:/home/user/packages/ eeepc/main Translation-en_US
Ign file: eeepc Release
Ign file: eeepc/main amd64 Packages
Err file: eeepc/main amd64 Packages
File not found
W: Failed to fetch file:/home/user/packages/dists/eeepc/main/binary-amd64/Packages.gz
File not found
E: Some index files failed to download, they have been ignored, or old ones used instead.
sudo apt-get install apache2 gives me :
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package apache2
I'm trying to install ndiswrapper in Fedora 10, but the package is not found:
[Code]...
I installed ubuntu server and got it set up, and im trying to install shorewall as a firewall, but whenever i do sudo apt-get install shorewall i get a package not found error.
View 5 Replies View RelatedI'm using a new Distro and after installing it and randomly searching for help on websites on how to install a .Deb file using dpkg at the konsole/terminal it says Bash : dpkg: Command not found . how is this possible ? Do I have to know about all the packages in the package manager to install this. slight difference for me ... knowing what I have and knowing if I need Apr93-323? (whatever) installed first or not ? The only thing I know is that I have the Iso image installed ... which is my linux distro . Where to go from here? because I usually go to a website site to find Software to install ...if I need it .back to the basics
View 14 Replies View RelatedProbably a stupid question. I want to install flashplayer- found the package on the adobe website- chosen the version (9.04+) and I then get the question 'Choose an application' - to open it with. What do I do now? This prompt simply takes me to file browser. Or is there an easier way to do it?
View 5 Replies View RelatedI am trying to install wine in ubuntu 8.04. While installation getting the error 'No suitable package flex found'. I tried to find out flex package in adobe as well as other sites. unable to find out.
View 3 Replies View RelatedI can't find the imagemagick package in the repositories. Anybody knows where I could find a binary for that SW? I tried to install from source but failed... Everything seemed fine up to when I tried "sudo make install", and there I got lots of errors. When i try to run any command, it does not find the libraries..
View 7 Replies View RelatedFedora 14 I recently went to install some software using the source files.When I ran the command
Code:
./configure
I got a message saying that
Code:
package gthread-2.0 not found
After searching the internet some one had the same problem. I needed to install a package called
Code:
glib2-devel
However, rather that searching the internet.
I'm experiencing a strange issue with my Ubuntu 10.10 since a few days:when trying to update the packages list, a lot of repositories are ignored.Here is the output of
Code:
sudo apt-get update | grep -i ign
.
Quote:
Ign http://extras.ubuntu.com/ubuntu/ maverick/main Translation-en
Ign http://extras.ubuntu.com/ubuntu/ maverick/main Translation-en_GB[code]....
How come all these repositories cannot be hit?is there any way to make the update hit there repositories? And if they're useless, no longer supported, how can I remove them so to have a tidy repositories list?
I installed Eclipse from the repositories and found it is very slow. It takes about 5 minutes to start up. Is that normal?
View 5 Replies View RelatedRed Hat Desktop 5.5 I think I was successful in screwing up my yum configuration, I might have removed a few repo files too many. I wanted to add rpmforge to my repositories and wanted to install yum-priorities and it is telling me "No package yum-priorities available".
As I am sure it exists and my machine is not finding it it only leaves operator error/screw-up. What are the default repo files for Red Hat desktop and where can I get them?
I have centos 5.3.I couldn't find git package in any of the yum repositories. Is there a package location, version you would recommend.
View 1 Replies View RelatedI'm rather new to Linux...especially Debian. I've been running Kubuntu for about 1 month now and I wanted to try out Debian as well. So I installed it on a laptop (Downloaded the 6 DVDs). Now, how do I add some repositories to Synaptic so I can update my software? Also, is there a list of repositories? So far, every time I want to install something I need to insert one of the DVDs.
View 3 Replies View Relatedi want to knw where can i find the list of all the repositories from where rpm and yum fetches the package and also the location where all the packages are installed by rpm and yum
View 2 Replies View RelatedHow to install gufw? I could not find it when i clicked "install gufw" the message came as package not found.
View 2 Replies View RelatedThe package manager is scrambled in my Ubuntu 11.04. It started with the repositories list being scrambled with multiple entries. Now when the Package Manager is launched it just accesses the hard drive forever. I did give it a half an hour just in case so it clearly stuck in a loop of some kind.
What I'd like to know is: Is there some way to reset, clear, turn off or de-select the added Repositories list from the command line (terminal.) This seems to be the only way since the Package Manager gets stuck. Keep in mind that I'm only slightly competent with Linux and have no idea where the Debian Package Manager data is located or how it works. If I go poking around without at least some guidance I may make things worse.
The problem seems to be spreading. Got stuck again while saving this message. Turned off the system, rebooted to recovery mode and did a file system check. Okay for now. Switching to clean OS on other partition.
I'll check for answers there but it's only Ubuntu 10.04 and I'd very much prefer to have 11.04 working and not have an effectively dead partition and don't want to loose everything on it with a re-format and 2 day re-install process (no installation disk.)
I recently installed 11.4 32bit on my computer at my summer home. I carry a DVD with all my /home data. Then today I noticed that all my repositories are labeled "11.3" repositories. Everything works. Here is the output from "zypper lr -d"...
# | Alias | Name | Enabled | Refresh | Priority | Type | URI | Service
[Code]....
What is the correct method of moving to the 11.4 repositories?
Fedora 14 I recently went to install some software using the source files. When I ran the command ./configure I got a message saying that No package gthread-2.0 not found After searching the internet some one had the same problem. I needed to install a package called glib2-devel However, rather that searching the internet. Is there any yum command that can give me that information?
View 2 Replies View RelatedToday I was using Gchempaint (part of Gnome Chemistry Tools) and found that the F12 version fails miserably to correctly export H to xyz. So I decided to install the latest version I found (0.11). There are, however, some problems I must sort out during compilation.
Apparently it does not see my 'cairo' installation and so I get the following error message:
Code:
checking for cairo... configure: error: Package requirements (cairo >= 1.6.0) were not met: No package 'cairo' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix.Alternatively, you may set the environment variables cairo_CFLAGS and cairo_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
I just installed ubuntu because the newer versions were not working for me. So I installed 7.10 and there is no repositories that are still up. Is there any repositories that I could add from the newer ones or other distro repositories.
View 8 Replies View RelatedI am running Suse 11.1 64bit, with KDE, recently I received a pop up on my screen, "something about update problems", I used Yast 2 and selected online Update and it couldn't find updates for Nvidia and froze at that point. I dis-enabled that repository and refreshed all of the remaining Repositories individually and it seemed to work. I then went to the repositories listing and selected "Add" and selected "community" repositories and received the following: WARNING Unable to download list of repositories or no repositories defined. What is my problem? How do I acquire the list of community repositories? I can live with out the Nvidia repository for now but would eventually like to get it back.
View 2 Replies View RelatedI have just started using the zsh shell to see what its like and so far I like it. However one anoyance is that if I type: Code: sudo apt-get install plymouth-* I get package not found. If I do the same in a bash shell I get the option to install the the packages matching the wildcard.
View 1 Replies View Related