Ubuntu :: Access Wubi Files From Live Cd?
Apr 1, 2010is there a Linux utility that will let me access the Wubi filesystem in a live cd?
View 3 Repliesis there a Linux utility that will let me access the Wubi filesystem in a live cd?
View 3 Repliesi'm having some problems booting ubuntu 9.10 and i just want to backup my files and install it all over again.I want to access my old files from the ubuntu Live CD, because no kernel is working.Is there a way?. Just in case, i don't have partitions, so i don't have a 'home' one (but i'm going to
View 5 Replies View RelatedI was playing around with some files in Slackware and decided to do something stupid for the sake of experimentation. I wouldn't say I screwed something up because I did it intentionally to see what would happen (that's how you learn, right?), but I disabled my login tool. I need to access to the....
View 2 Replies View RelatedI'm having some problems booting ubuntu 9.10 and I just want to backup my files and install it all over again. I want to access my old files from the ubuntu Live CD, because no kernel is working. Is there a way?. Just in case, I don't have partitions, so I don't have a 'home' one (but I'm going to).
View 1 Replies View RelatedUbuntu 10.10 has crashed and I'm resigned to a re-install, however is there any way to recover or access my files via the CD, live, during install or after ?
View 3 Replies View RelatedI am trying to install Fedora 10 on an old P3 Inspiron 5000. When I boot from the Live cd the screen is split into three sections and is hard to navigate. I am able to edit the /etc/X11/xorg.conf file and log out and log back in to proceed with the installation. The problem is when I finish the installation and reboot to the new OS it boots to the triple section mode again because my xorg.conf is not edited. To do any commands in Fedora I need to get through a brief user setup in which I cannot navigate through until I can see the screen better. Is there a way to boot to a graphical type safe mode so I can see the whole screen to finish the installation?
How can I access folders from the live cd to edit the installed files? This way I can edit the xorg.conf file before booting and all would be legible.
I'm running Windows and 9.04 in a dedicated partition on my HP DV1000 (32bit), and I would like to boot to a 10.04 Live CD to make sure that everything will work with the upgrade. But, no matter what I try (unetbootin USB, Linux Mint, CDs of both) I can't get the machine to boot to anything other than the HD.
I did a wubi installation of 10.04 on a Compaq CQ laptop and ran into the same problem. I went into the BIOS on both machines and I think I tried all the different settings, but no go. I must be missing something. Is working through the BIOS the only way to get one's machine to boot from a usb or optical drive, or is there another trick to it?
I have developed a simple tool to easily uninstall any Ubuntu (or other Linux distro) from an Ubuntu live-CD.It works very well for any Linux installed on a separate partition.Now I am wondering if it is possible to add it the possibility to uninstall a Wubi installation.For the moment, I know how to detect a Wubi install (just need to detect a /ubuntu/disks/root.disk file).Then, all tutos I found use Windows tools, but this "How do I manually uninstall Wubi?" paragraph gives clues to do it from a live-CD :- Remove C:ubuntu and C:wubildr* : ok- remove Ubuntu from the Windows bootloader : do you know how to do this from a live-CD for Vista and Seven ?- remove Ubuntu from the registry : do you know how to do this from a live-CD
View 2 Replies View RelatedI got the BSOD on Windows 7 and I was unable to fix it at all. But I had already installed Ubuntu on my computer a while ago with a wubi installation. I look and saw other form posts/ tutorials online and ever time I follow them the error I end up getting is hard drive already mounted. Is this because I am already on that hard drive by running Ubuntu or is it because of a bsod error. Also what will happen if I force unmount my hard drive? Basically I want my files from the windows portion so I can move them then too a portable hard drive and factory reset my whole computer.
View 3 Replies View RelatedI wanted to install ubuntu via wubi, but i had to format my partitions (can't do it on wubi ) so i used a crappy program(i don't remember the name) to get rid of Backtrack4 , because i wanted windows kept for my mom.So, that was the sorry, i've ended up with a GRUB error 22, and a Backtrack4 CD stuck in my DVD-rom.So my question is: Can somewone tell me how to fix error 22? (i've seen some methods online, but i obviously can't put a Windows CD in my DVD rom because the Backtrack4 DVD is stuck in there.
View 4 Replies View RelatedSo yeah I want to transfer my system to the real Ubuntu. Problem is I can't boot into my Wubi Ubuntu cause I lost boot.
View 5 Replies View RelatedAfter clicking on wubi.exe nothing happens. Wubi does not start at all.Windows XP, SP3.
View 9 Replies View RelatedI want to upgrade my 9.10 from Wubi to a full install (my 30 gigs is almost filled) without losing my files and settings(like my panel apps and options). but how?
View 2 Replies View RelatedInstalled Ubuntu 10.10 Using Wubi - Can't Access GUI First, let me say that I'm new to Ubuntu and this is the first time I've tried installing it on my desktop PC. My PC specs are as follows:
Operating System:MS Windows XP Professional 32-bit SP3
CPU:Intel Celeron 336, 2.80 GHz, Prescott 90nm Technology
RAM:1.0GB Single-Channel DDR @ 165MHz (2.5-4-4-7)
Motherboard:MICRO-STAR INTL, CO.,LTD. MS-7108 (Socket 478)
Monitor:LG-T711S @ 1024x768
[Code]...
I've created a new user for a SSH tunnel only.After login I can access all directories because permissions is set for "Others" to "Access files".Now my question: Is this normal that permissions for Folder access for "Others" is always set to "Access files"?I don't want my SSH tunnel user accessing the directories.
View 4 Replies View RelatedI need to backup my /home directory on the HDD. I broke the current ubuntu installation, so I can not just boot up the system without the live CD. Is there any way I can access my user data in /home? I need to back it up so I can reformat/reinstall.
View 1 Replies View RelatedIs there a way to access or mount the internal hard drive using the live CD?
View 2 Replies View RelatedOur family laptop (read lots of important pictures) is blue screening on boot. It gets part way through the windows boot (why I think it's still alive) and throws an error about unable to mount boot partition or something like that.I booted into Ubuntu live and cannot see the hard drive when I look in Nautilus. I do see the hard drive when I look in the disk utility. When I do sudo fdisk -l in terminal nothing comes up it just goes back to ubuntuubuntu:~
View 11 Replies View RelatedMy laptop froze up this morning and required a forceful shutdown and since will not boot. it is a new drive in the machine and have to admit I had not tried my old Ubuntu partition since cloning the drive from my one I RMA'd to Western Digital. So I have downloaded 10.10 Desktop version and burnt to a DVD.
If I try and use Nautilus I can not view anything on the WinXP partition but I can access my NTFS Data drive and my old Ubuntu Studio partitions (which I can't boot although I see Grub options.)
If I go via Terminal I can get at least some access though. What Ubuntu is showing as the name looks suspiciously like a Windows serial number. Is it in fact what I registered my Windows with? Once I get into the Win partition I can view contents of C's root. Here I can view the boot.ini file (which all help on the internet I could find claimed had probably got corrupted) but it looks as it should. I can get into Program File and Documents and Settings so some of the drive seems to work (and I should be able to back up my settings, all Docs and data already live on another partition anyway.) But it will not access the WINDOWS folder. This means I can not try replacing stated missing files from WINDOWS/system32.
Is this because either part of WINDOWS has become corrupt? Or the Address Headers for it? Or is there something that locks off Ubuntu from accessing this that I need to change? Seems strange I get nothing at all listed for the WinXP drive on Nautilus but at least some access with Terminal. Is there a Check Disk type program within Ubuntu that can work on NTFS partitions? Last time I checked (fair few months ago now) there wasn't but here's hoping to progress.
I have a big problem with my ubuntu linux.. last night i was trying to execute a windows aplicacion (with wine).. suddenly the pc turned off.. later i turned it on but i couldnt enter to ubuntu... now i want to format my pc but i need to save some files on my flash drive.. because i cannot enter to ubuntu so i can save those files.. I used the Live CD, actually im using the live cd right now... the problem is that i dont know how to acces to my hard drive so i can save those files. every time I try to acces, this error appears...
Unable to Mount Location
DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending
I tried with right click>Mount... but this error appears..
Unable to Mount Location
DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Two days ago my Windows 7 just crashed and it doesn't work any more. Using a computer in a Internet point a downloaded Ubuntu 10.10 Live and now I'm running it in my computer. I would like to install Ubuntu definitely on my computer but before I would like to find all my old file from Windows 7. In Places/Computer has only the File System and nothing else. In System/Administration/Disk Utility I can see my 320 GB hard Disk (ATA Samsung HM3200II) but I can't do anything in that. I tried to use the Ubuntu 10.10 live in other computer and this work perfectly, but in this one no. What can I do to right now?
View 2 Replies View RelatedI recently bought the book Hacking: The Art of Exploitation, and it came with a live cd of Ubuntu. I run it on my Mac, but I get this in the console screen whenever I try to load it:
Code:
Loading, please wait�
[2.424000] usb 1-1: can't set config #1, error -71
[4.644000] ieee1394: Error parsing configrom for node 0-00:1023
[6.236000] drivers/usb/input/hid-core.c: couldn't find an input interrupt endpoint
[10.768000] sdb: assuming drive cache: write through
[10.768000] sdb: assuming drive cache: write through
BusyBox v1.1.3 (Debian 1:1.1.1-3ubuntu3) Built-in shell (ash) Enter 'help' for a list of built-in commands /bin/sh: can't access tty; job control turned off I'm not sure what this means. I'm completely new to Linux, so I don't know whether the CD is corrupted, or I don't have some sort of BIOS or something.
I changed to wubi last night, i decided to go that way cause i was informed it was a safe way to try giving it a try for linux and ubuntu without any special effort needed to be payed and easily deleted if i am not pleased.Thankfully i am pretty satisfied with the results, i pretty much dealt with most of the issues i have faced so far successfully and i am running it ok beside one important thing.See i am using my laptop, which has a hdd of 250GB.On my Vista there are 2 different hdd C+E by default, they separated my hdd.So while i have windows on C and E is pretty much used for my additional data(see movies, music etc) when i installed wubi i installed it on E, thought it would be better and it had more space.
Now though, while i can access threw ubuntu all my files that were located on C(vista) i cant access any of the E ones, and search file dont helps either.The "vista hdd" as ubuntu describes it, its a 250 gb disk on computer, which means it should contain both of the vista disks.But sadly thats not the case.i cant seem to be able to find them anywhere.
the permissions for my home directory were accidentally changed from 'access files' to 'create and delete files', and I changed them back, but ever since then I am not able to change any preferences/settings at all. power management, themes, panels, emerald, anything. my user account is supposed to be the administrator, and all the user privliges are checked. how to get control of my computer back?
View 9 Replies View RelatedWhat i really need to know is if there is a way to access a Ubuntu file system on a hard drive from a live CD. When i acess it now it just shows the Windows files on it, and i cant access the Ubuntu partition. What happened was this: I was trying to install Ubuntu on an external hard drive. I moved all the settings to the Hard drive so i didnt think it would affect my other drives. I mustve missed one of them because insteading of loading GRUB like it normally does, it came up with GRUB error 21 and did nothing. I tried to fix it, but nothing worked. I finally decided to unplug everything except the external and install it from there, so id atleast have a functioning desktop. As it turns out, my comp doesnt suport USB booting. So the only way i can use my computer is by Live CD. I was trying to fix things so i had both hard drives power supply unplugged. being slightly drowsy from staying up late that night, I plugged them in while my computer was on. the first one went in just fine, no problems. The second one though, also my master drive, i was having troubles pluging in. while i was turning it to fit in, it made a big spark and shocked my master drive. That drive had my MBR and Windows on it. Now It cant find a MBR, and i cant access the ubuntu partition on my slave drive. Is there any way to save this?? im 99.9% sure ive screwed myself over hardcore epically, but im hoping to save at least 1/2 my data.
View 3 Replies View RelatedI want to access my hard drive to copy over my old documents. So I boot into a LiveUSB, mount my ubuntu partition, and then cd to my home directory, but I can't open it. I get "permission denied." I encrypted my whole home directory and know the password, but how do I "decrypt" it or login as the partition's root so I can access the documents that way. I'm booted into the USB, but can't access the home directory. I get "You do not have the permissions necessary to view the contents of 'jake'".
View 1 Replies View RelatedHow do you access a floppy drive from linux dsl live?
View 11 Replies View RelatedI've got an Hitachi Deskstar 164GB IDE drive which I've somehow managed to upset while attempting to swap distros. I'm guessing its lost the MBR as I can't get a PC to see it except in the BIOS. The BIOS tells me that the primary master has 164GB, Cylinders 65535, Head 16, Precomp 0, Landing zone 65534 and Sector 255. (my understanding of that info is very limited). The PC won't boot direct from the hdd and a live Knoppix disc can't see it. Trying fdisk -l produces no list. (Naturally, I can't install another distro on it either).
View 10 Replies View Relatedcan't access internet. The up and down icon appears by the network connection (upper right hand corner). When I review connection properties, I see that the computer has a valid address, subnet, gatway, dns, etc... But it still can't connect to the internet. I can't ping external addresses either. But I can access internal addresses (local router).
View 2 Replies View Relatedi installed my desktop environment from synaptic manager! so when i restarted my computer i couldn't log into the desktop environment. How can i recover from this? Also,how can i access my home folder from a live cd?
View 4 Replies View Related