So I have been following the instructions over at the Community Ubuntu Documentation: How to create a live CD from scratch and ran into a slight problem:
[URL]
I am using the maverick repository to create the franken-buntu. what the Maverick Meerkat's equivalent of the discover1 package is.
I want to install kernel package by this command sudo apt-get install kernel-packagebut it gives me the error :Package kernel-package has no installation candidate
View 1 Replies View RelatedI'm trying to install sun-java6-jre as a program needs it to run. When I try to install I get the error below. Any ideas? I'm new to Ubuntu...
sudo apt-get install sun-java6-jre sun-java6-plugin sun-java6-fonts
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
I write apps for webOS, and need to use the palm emulator. The emulator runs on virtualbox-3.0 to virtualbox-3.2 only (no support for virtualbox 4). After adding the virtualbox source, I still cannot install virtualbox-3.2, and am instead given the error:
Quote:
Package virtualbox-3.2 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'virtualbox-3.2' has no installation candidate I tried downloading and installing the virtualbox-3.2 package from the web site, but it does not run. The contents of /var/log/vbox-install.log are as follows:
Quote:
Uninstalling modules from DKMS
removing old DKMS module vboxhost version 3.2.12
------------------------------
Deleting module version: 3.2.12
[code]....
Is there some way that I can get this package installed?
I have Ubuntu7.10 installed on my machine. I am getting some errors installing some rpm packages. I found the error message "rpm command not found".does it mean that i need to istall rpm package manager? right? I have a lot of .rpm packages to install.
and when i try "apt-get install rpm " , the following error occurs
Quote:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package rpm is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package rpm has no installation candidate
I am working on Ubuntu 7.10 and I want to install libssl-dev_0.9.8a-7ubuntu0.13_i386.deb. So tried it with apt-get command but getting the following error--
root@user-desktop:/# apt-get install libssl
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package libssl is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or is only available from another source
E: Package libssl has no installation candidate
Then I downloaded .deb file and attempt to install it with package installer but again unable to install it and getting the error--
Error: Dependency is Not Satisfiable: libssl0.9.8
In Synaptic, libssl0.9.8 is installed on my system. I tried reinstalling it and that didn't make a difference.
i need to install the package libxmlrpc-core-c3-dev, so i wrote in the command line:
root@ubuntu-desktop:/home/ubuntu/Desktop# apt-get install libxmlrpc-core-c3-dev
& the following message appears:
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... Done
Package libxmlrpc-core-c3-dev is not available, but is referred to by another package.This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package libxmlrpc-core-c3-dev has no installation candidate
I have had webmin running previously but i just recently installed Unbuntu server and i am now trying to install webmin. after typing this to install webmin sudo apt-get install webmin it started doing its thing and then it halts.
Giving me the following message: "Package webmin is not available, but is referred to by another package. this may mean that the package is missing, had been obsoleted , or is only available from another source."
The first thing i did after installing webmin was edit the sources.list
Then i tpyed sudo nano sources.list I uncommented everything with "deb" in front of it
I also uncommented
deb cdrom:
I then typed this sudo wget [url]
After getting that i typed this apt-get install perl libnet-ssleay-perl openssl libauthen-pam-perl libpam-runtime libio-pty-perl libmd5-perl
Then i tryed to install it and got that error.
I also tryed install it using this tutorial [url]
When i got to the part when i need to type
sudo apt-get install update this is what happened
I have the latest RPM's but bank is saying the User Name and Password they issued me is hitting their server, but I get a screen coming back saying it can't find any suitable accounts at my bank to map to. Is 3.98.1-1 just a release candidate or is there an actual bug in the OFX package?
View 1 Replies View RelatedI noticed that mysql has an RC available for its latest version mysql 5.5.I was wondering if anyone can give me an educated guess as to when we can expect to see mysql show up in the synaptic package manager after mysql 5.5 reaches GA status.
View 3 Replies View RelatedIm a first time user of Ubuntu, I have 11.04 64bit installed. I used to use Fedora before. Seems like all of a sudden APT-GET stopped working. Whatever I try to install, it either tells me dependencies unmet presumably because the libraries are uninstalable (as it it says), and then when I try to install these packages I always get the error "Eackage xxxx has no installation candidate". This is for anything I try. I use Main server in Software Source, but have tried different servers too. May I point out that I haven't touched it, one day it was working the next it was not. Very Windows-like
[Code]....
I'm planning to install Fedora 11 Release Candidate on my computer because I really need a working Linux system, right now. Once the final version is released, will I have to do a fresh install or do I just update the packages on my system to get the final version?
View 1 Replies View RelatedI have installed on an Acer Aspire One netbook. The same problems with the Netbook Remix and Gnome.
(1) RESTART is hit and miss. It gets stuck and I have to do a hard shutdown (press the on/off switch for a few seconds)
(2) WIRELESS CONNECTION is hit and miss. The Connection Information goes missing. Have to shutdown & restart for it to work (restart never works)
(3) APPLICATIONS FREEZE all of a sudden. The mouse stops working and the keyboard stops working. I have to do a hard shutdown. Restart does not work.
(4) RHYTHMBOX launch is hit & miss. The little icon appears in the tray but I can do nothing - can't ask it to Show Rhythmbox and can't shut it down. Have to use System Monitor and kill the process there. IF MY MACHINE HAS NOT FROZEN DOWN COMPLETELY.
(5) GOOGLE CHROME and FIREFOX browsers run quickly when they start, and then, as time passes, run more and more slowly, until the freeze the whole computer.
I am following this guide to installing eclipse via terminal command-line on Linux. However, this seems to be happening lately with all the packages I try to install..I checked the Synaptic Package Manager and reloaded and rebooted the computer, but to no avail.
View 5 Replies View RelatedI have a problem when installing this package through synaptic package manager. this is :
libpng12-dev
the error is:
W: Failed to fetch http://security.ubuntu.com/ubuntu/po...tu2.1_i386.deb
404 Not Found [IP: 91.189.92.167 80]
my distribution is ubuntu 10.4.
I'm running squeeze. Some time ago uswsusp was removed from testing. I have a laptop that I would like to suspend to ram occasionally. On the developer bts page they say that because of the freeze in squeeze the new candidate for uswsusp is not considered. I see it has bugs. What does one do in this kind of situation? For some reason a while back I removed uswsusp from my system. Was that a colossal mistake?
View 4 Replies View RelatedI just finished installing a dual boot XP/Ubuntu 10.04 LTS for desktop about half an hour ago, and it's my first experience with a Linux OS. Now that my *complete idiot noob* flag is flying, I have an error I think I need to report:An error occurs with the Package Manager, I get this message when I try to run it, and when Ubuntu boots:
E: Encountered a Package with no Package: header
E: Problem with MergeList /var/lib/apt/lists/
us.archive.ubuntu.com_ubuntu_dists_lucid_restricte d_binary-i386_Packages
E: The package lists or status file could not be parsed or opened.
This usually means that your installed packages have unmet dependencies I tried to download and install Chrome, and it came up with a similar error.
Is my install corrupt/incomplete or something? My setup is a P4 2.4Ghz, 512Mb RAM, onboard graphics, wireless internet and the HDD is 40GB, split into 2 partitions, and my Ubuntu Partition is 10 GB. I'm running Ubuntu 10.04 LTS distribution, and the other OS is Windows XP Professional SP3.I installed Ubuntu by using the Wubi installer.
Self learner developer since about 2 years, I'm trying to understand deeper how to design a database in the best and most efficient way possible.Reading about UML design, I've found this: Do not automatically add ID numbers(surrogate keys) or substitute keys to a table until you are sure that:
-There is at least one candidate key (before the surrogate is added),
-the table is a parent in at least one association, and
-there is no candidate key small enough for its values to be copied many times into the child table.
Until then, I've always did this (I mean using ID) to identify my rows.So my questions are:
1. Why should we avoid using ID to identify rows?
2. Candidate keys add some weight to our database, and this can huge if we have millions of records, so why should we use these over surrogate keys?
When i try installing anything i get errors, for example when i try to install somthing from ubuntu software center i get this.
Code: installArchives() failed: Preconfiguring packages ... Preconfiguring packages ... Selecting previously deselected package ttf-symbol-replacement. (Reading database ... dpkg: warning: files list file for package `libsdl-image1.2' missing, assuming package has no files currently installed.
[Code]....
I have installed UBUNTU 9.10(2.6.30)
I'm trying to execute the following command: apt-get install linux-headers-`uname -r` mercurial build-essential cvs subversion libncurses5-dev
I get the following error:Package libncurses5-dev is not available, but is referred to by another package.This may mean that the package is missing, has been obsoleted, or is only available from another source
E: Package libncurses5-dev has no installation candidate
Package Installation error
Recently I get an error while installing any packages offline.
"Action would require the installation of packages from not authenticated source".
The key icon at top tight corner shows.
This is the error: Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message:
'E: Dynamic MMap ran out of room. Please increase the size of APT::Cache-Limit. Current value: 25165824. (man 5 apt.conf), E:Error occurred while processing libwpeditor-dev (NewFileVer1), E: Problem with MergeList /var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_karmic_universe _binary-amd64_Packages, E:The package lists or status file could not be parsed or opened.'
I i cannot install updates (181). I'm using 10.10, Heres is the error i get: The installation or removal of a software package failed.
[code]...
i get this error whenever i update or install/uninstall a package Package operation failed
The installation or removal of a software package failed.
installArchives() failed: perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_IN.ISO8859-1"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
perl: warning: Setting locale failed.
[Code]...
Impatient as I am I installed RC 1 of the 64 bit version of Debian 6. Will this automatically update as a fixes are applied or will I need to reinstall once the stable version is released ?
View 2 Replies View Relatedinstalled ubuntu 10.04, i possess the BSNL EVDO AC8700 , i downloaded the package for the same from the zte website but when i try to install it its giving the following error
"
(Reading database ... 123335 files and directories currently installed.)
Preparing to replace crossplatformui 1.0.27 (using .../CrossPlatformUI-V1.0.27-B
[code]....
When you get to the package installation you get by default:
Desktop Environment
Standard System
Which i disable for my minimal installation.Out of curiosity, can somebody tell me what is installed with the Standard System?
How do you convert a 9.04 .deb to a 9.10? I'm not sure if I even need to, but before I install an older package I would like to know if there are general rules. I have a camera software package that has yet to be updated, and I can't find the source code, but can find the Jaunty .deb. are there any pointers out there?
View 2 Replies View Relatedwhen i update my computer, i receive this error message can anyone tell me why and how to fix it ? Failed to fetch [URL] 504 Gateway Time-out Some index files failed to download, they have been ignored, or old ones used instead.
View 3 Replies View Relatedwhy there is no out-of-the-box package for freepbx so that one could simply do apt-get install freepbx ?This is the most common, most robust gui front-end to Asterisk.Currently, one has to do many custom steps following:
[URL]