installed ubuntu 10.04, i possess the BSNL EVDO AC8700 , i downloaded the package for the same from the zte website but when i try to install it its giving the following error
"
(Reading database ... 123335 files and directories currently installed.)
Preparing to replace crossplatformui 1.0.27 (using .../CrossPlatformUI-V1.0.27-B
[code]....
I,ve tried upgrade from F14 to F15 using preupgrade, but I run into serious problem. Preupgrade downloaded all packages without problem and prompt me to reboot. After reboot installation process went ok. It was upgrading cca 1650 packages. But installation hung around package 1600 (almost on end) with message that openjpeg-devel-1.4-6.fc15.i686 cannot be installed and only option to end installer. After reboot I ended up with "kernel panic - not syncing: VFS: unable to mount root fs on unknown-block(0,0)". It is still possible to enter grub menu, where I can choose upgrade to F15, but it fails again on that openjpeg-devel package. When I enter terminal after failure, I can see package is downloaded in preupgrade repo (and after moving somewhere else and running upgrade again it I got message that package is missing). Is there any possibility to skip this package installation or only option is fresh reinstall?
View 10 Replies View RelatedI installed a packge redmine apt-get install redmine It went without any error. But I found later that it was not working. Another package I installed was red5 during installation it says it can not start red5-server. How can I debug the package installations. If there would have been some script I would have set some thing like set -vmx in it.
As an example while installing red5 I got a message to issue the following
Code:
See [url] for more information about dependency based boot sequencing. To reattempt the migration process run 'dpkg-reconfigure sysv-rc'. Even then it failed.
I'm new to this system and trying to install plug-ins but I always seem to get some sort of rejection..
[root@localhost haley]# yum install vlc
Loaded plugins: langpacks, presto, refresh-packagekit
[Errno 14] curl#6 - "Couldn't resolve host"
Trying other mirror.
Could not retrieve mirrorlist...^... error was
14: curl#6 - "Couldn't resolve host" .....
Error: Cannot retrieve repository metadata (repomd.xml) for repository: rpmfusion-nonfree. Please verify its path and try again [root@localhost haley]#
So then I checked to see if I had rpmfusion-nonfree, and I do. I really have no idea what to do, I have spent hours trying to get this work. I want to be able to open any media file, avi, wma, mp4, etc.'m using Fedora 15.
Package Installation error
Recently I get an error while installing any packages offline.
"Action would require the installation of packages from not authenticated source".
The key icon at top tight corner shows.
After having tested Ubuttu 9.10 on a VM with Win XP Pro as host and running both Ubuntu 9.10 and 8.04 from a CD/CDR drive I decided to do an installation of 8.04 on a separate HD and import files.Installation seemed to work OK, but on reboot: no menu was shown to choose OS and the machine booted directly into Windows.Tried to boot directly from the "Ubuntu" HD in the BIOS boot menu and get the message "MBR error" full stop literally.The Ubuntu hard drive is no longer recognised in Windows , can't be acessed from the DOS prompt and obviously cannot be reformatted from there.Just for the record, I'm not totally excluding operator error from the cause
View 9 Replies View RelatedRunning VirtualBox 3.2.6 under some host OS (should be irrelevant which one, right?), I created a machine, intending to install Fedora 13 on it. Got the Fedora 13 Live CD iso image, and an 8.6 GB virtual hard drive, completely blank. I set the machine to boot off the Live CD image. The Live CD boots nicely and I get to its desktop. I open "Install to Hard Drive"...and nothing happens. No error message, zip, nada. Inspection of the system shows a series of odd file systems, but I have no clue what they are for and whether they're usable or not.
The sticky [URL] mentions that the blank virtual hard disk should be partitioned and formatted beforehand...So I did, using the Live CD's Disk Utility (Applications: System Tools: Disk Utility). Although the sticky states the small /boot partition should be ext2 or ext3, the Live CD installer proposes to reformat it as ext4. Shouldn't we have formatted it as ext4 right away, then? Also, the installer set the /boot partition's size to 524 MB, not 200 MB as recommended by the sticky.
OBSERVATION: This was not easy because VirtualBox sets the display to 800x600 at most, and the Disk Utility spills beyond those confines WITHOUT PROVIDING SLIDERS. It was sheer luck that the required buttons (create partition, format partition) were barely reachable (at the bottom edge of the screen). This is a serious problem, because increasing the VirtualBox display size can only be done *after* installation (see for instance[URL] - since this guest addition requires rebooting the guest OS, it probably won't stick to the Live CD).
Once those two partitions are prepared and the virtual machine rebooted, "Install to Hard Drive" works as expected.
OBSERVATION: It is absolutely inexcusable that the Live CD installer (Anaconda?) does not propose to do this partitioning and formatting for the user. It is even more inexcusable that it should fail without giving any feedback whatsoever to the user.
Aside: VirtualBox's guest additions does not work correctly (for 3.2.6 anyway). The Devices: Install Guest Additions menu merely mounts a CD image VBOXADDITIONS_3.2.6_63112) without any feedback (expected feedback because the menu ends with an ellipsis). The CD, once opened, has an Open Autorun Prompt button...which fails to do anything. Manually running autorun.sh also fails. I had to manually invoke VBoxLinuxAdditions-x86.run from a terminal to get anywhere. Even then I was unable to go higher than 1024x768.
i tried to install jdownloader, for that i began by this command line:
Code:
sudo add-apt-repository ppa:jd-team/jdownloader
but the problem was that i had:
[code]....
I recently realised that I could use Linux to "revive" old machines, and have set it as my goal to actually get all old PCs in my house working again using different variants of Ubuntu, while learning how to use the OS in the process.And now I got stuck while installing the OS on an old Laptop. It's an HP Omnibook XE-3, with a Pentium III 1066 MHz cpu and, supposedly, 256 MB of RAM. However, for some reason the computer only reads 248 MB, so I've been forced to resort to an alternative disc installation. Since the old HP has a broken CD tray, I've been using an external hard drive to boot the image, created with Ubuntu's startup disk creator, instead of an actual CD rom (I doubt that makes a difference, but just in case)
There are two main issues which have really left me with no obvious (for a newbie) alternatives. Firstly, when the text installation procedure reaches the "Installing base system" part, an error message appears saying that no kernel could be found on my Drive, so the installation fails. If I try to skip installing a kernel temporarily, it lags horribly and produces multiple errors, dying shortly after.The second problem is that I can't actually do a command line boot to try and manually figure out a way around this. Selecting the command line installation mode on the main installation menu changes nothing, and it's a normal text install which runs instead.Unable to access the command line,why my kernel is apparently missing.
I am following this guide to installing eclipse via terminal command-line on Linux. However, this seems to be happening lately with all the packages I try to install..I checked the Synaptic Package Manager and reloaded and rebooted the computer, but to no avail.
View 5 Replies View RelatedI have a problem when installing this package through synaptic package manager. this is :
libpng12-dev
the error is:
W: Failed to fetch http://security.ubuntu.com/ubuntu/po...tu2.1_i386.deb
404 Not Found [IP: 91.189.92.167 80]
my distribution is ubuntu 10.4.
I i cannot install updates (181). I'm using 10.10, Heres is the error i get: The installation or removal of a software package failed.
[code]...
I have been trying unsuccessfully to install fedora 10 or 11 on my older PC. I have trieddoing a text install with acpi=off and i8042.nomux but with the same results. The installation sticks indefinately at the anaconda load. CTRL-C works, so it's not a hardware freeze.
Hardware:
Pentium 3 500Mhz Slot1
130 or so MB of ram
2 Maxtor IDE drives
CDROM 56x
Riva TNT2 video 128
i get this error whenever i update or install/uninstall a package Package operation failed
The installation or removal of a software package failed.
installArchives() failed: perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_IN.ISO8859-1"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
perl: warning: Setting locale failed.
[Code]...
i need to install the package libxmlrpc-core-c3-dev, so i wrote in the command line:
root@ubuntu-desktop:/home/ubuntu/Desktop# apt-get install libxmlrpc-core-c3-dev
& the following message appears:
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... Done
Package libxmlrpc-core-c3-dev is not available, but is referred to by another package.This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package libxmlrpc-core-c3-dev has no installation candidate
I just finished installing a dual boot XP/Ubuntu 10.04 LTS for desktop about half an hour ago, and it's my first experience with a Linux OS. Now that my *complete idiot noob* flag is flying, I have an error I think I need to report:An error occurs with the Package Manager, I get this message when I try to run it, and when Ubuntu boots:
E: Encountered a Package with no Package: header
E: Problem with MergeList /var/lib/apt/lists/
us.archive.ubuntu.com_ubuntu_dists_lucid_restricte d_binary-i386_Packages
E: The package lists or status file could not be parsed or opened.
This usually means that your installed packages have unmet dependencies I tried to download and install Chrome, and it came up with a similar error.
Is my install corrupt/incomplete or something? My setup is a P4 2.4Ghz, 512Mb RAM, onboard graphics, wireless internet and the HDD is 40GB, split into 2 partitions, and my Ubuntu Partition is 10 GB. I'm running Ubuntu 10.04 LTS distribution, and the other OS is Windows XP Professional SP3.I installed Ubuntu by using the Wubi installer.
I want to install kernel package by this command sudo apt-get install kernel-packagebut it gives me the error :Package kernel-package has no installation candidate
View 1 Replies View RelatedWhen you get to the package installation you get by default:
Desktop Environment
Standard System
Which i disable for my minimal installation.Out of curiosity, can somebody tell me what is installed with the Standard System?
I get the following result on trying to launch synaptic package manager gui:
View 9 Replies View RelatedI just installed ubuntu and cannot log in. authentification failure.
View 1 Replies View Relatedwhen I try to upgrade from Hardy Heron 8.04 LTS towards Lucid Lynx 10.04 LTS (via internet, not ISO-CD), following error is displayed:
" Could not install the upgrades
Error during commit
'E:Couldn't configure pre-depend jre for openoffice.org-writer2latex, probably a dependency cycle.'
Restoring original system state "
I deleted all Open Office package and other options were checked, but no success. Hardware: Notebook Toshiba Qosmio G45-AV480.
While upgrading (why did I do it?! 9.10 was working fine!) I got an lengthly error and now the computer won't boot. Error and then boot screen:-
Code:
Could not install the upgrades The upgrade is now aborted. Your system could be in an unusable state. A recovery will run now (dpkg --configure -a). Please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report. E:Sub-process /usr/bin/dpkg returned an error code (2), E:Sub-process /usr/bin/dpkg returned an error code (2), E:Sub-process /usr/bin/dpkg returned an error code (2), E:Sub-process /usr/bin/dpkg returned an error code (2), E:Sub-process
[Code]...
Computer won't startup after upgrade from Ubuntu 9 to 10.04 Lucid.
Upgrade performed through Update Manager.
Have repeated this exercise with the same result. (After failed first time, reinstalled v9 successfully. Waited a few weeks then tried updating to v10 again. Same unsuccesful result as last time I tried it.)
Got one error message during upgrade: "Missing resoureces. The Network Manager Applet could not find some required resources. It cannot continue."
Upgrade otherwise appeared to operate smoothly.
But:
When upgrade complete, and on restart, the following happens:
Gets to purple start-up screen fine. The dots tick away for a little while, the hard drive accesses, then goes to blank screen and all stops. Nothing. Keyboard doesn't work. Screen backlit, but no-one's home.
Restart again makes no differnce.
Machine: IBM Thinkpad X40
Have a dual boot: vista & ubuntu (64bit). Clicked the upgrade to 10.04 in update manager & spent a couple of hours downloading & installing. Had several requests about menu.lst. Which i replied keep the current Big mistake (i think) because on the reboot all the options are for 9.1. Tried the top option and 10.04? (i think) comes up but mouse & keyboard are inop.Booted with super grub cd & let it boot gnu/linux. Looks like 10.04 came up (how can u tell?) and seems to run ok. So what can i do to get the 10.04 options when rebooting without the grub cd?
View 1 Replies View RelatedI was running Ubuntu 10.10 and I was having issues with graphics card drivers so I decided to try upgrading to Natty using my Internet. The download went fine, the installation went fine (I sat and watched the computer the whole time. When I tried to upgrade from 10.04 to 10.10 I had the same issue and ended up having to wipe my hard drive and start over from the CD). But right before the installation was finished, the screen went blank except for a tiny text-editing cursor and even the cursor froze. Also, the Caps Lock and the Num Lock lights were flashing in sync rapidly. After a while I forced it to shutdown and then restarted it. GRUB boots, giving me a list and the option to go to a command line, but if I select 2.6.38-8-generic or the recovery mode, it freezes and the lights flash as described above.
In other words, all I can get to is a very basic CLI through GRUB.
Upgraded from 10.10 on my tower (scratch built, AMD Phenom II X6 1090T 3.2GHz, 16 GB RAM, 2x Sapphire Radeon HD6870 1GB) and it seems to have gone very wrong.
At the final post-installation reboot I get BIOS post, a black screen that hangs around alarmingly long, then the Ubuntu splash screen, then another black screen that seems, if anything, even MORE black (don't know how that works, but that's how it looks - it's not OFF but it's VERY black) and a whole lot of nothing going on.
Tried Ctrl-Alt-F1 to get to a TTY session, no go, no reaction. Just my friendly black screen. Tried F2-F6 as well, same deal. Tried Ctrl-Alt-F7 through F12 on spec, also no response. So Control-SysRq-K... and I DO get a response - I get a black screen with a number in []s and SysRQ: SAK. No TTY. Still doesn't like Ctrl-Alt-F1.
No disk thrashing. Nothing but gently whirring fans and my error message.
-UPDATE I take it back, it finally gave me a TTY login.
So. Um. Any guesses what happened to my poor XWindows setup?
I have tried doing the edit as described but all that happens is a new page opens up with a document titled menu.lst.
View 9 Replies View RelatedI'm running the 64 bit version of Ubuntu 9.10 on an AMD64 dual core platform with all the most recent upgrades installed. After the most recent Kernel upgrade version 2.6.31.20 the computer failed to boot correctly. Extremely slow getting to the desktop and a general failure to preload any programs that I load on boot. I had to uninstall and revert back to the previous Linux headers which solved the problem. If it makes any difference I have the machine setup as an apache2 server along with my standard desktop environment.
View 1 Replies View RelatedI managed to get Ubuntu installed, however, it just won't let me log in. I perform the net-install, and tell it my user name and password. However, once the install has completed, and the system rebooted, I cannot log in to Ubuntu (on X-screen or TTY). I've tried it twice - once with Karmic Koala Ubuntu installed with GNOME - the other with just CLI and they both fail.
View 1 Replies View RelatedI need to install the libmagick9-dev packages and am getting a failure when trying to do so:
Code:
apt-get install libmagick9-dev --fix-missing
The failure message is as follows:
[code]....