I just want to know how to adjust the screen resolution of my boot up screen. My PCs maximum resolution is 1366x768 but I think my boot up screen only uses 600x400. I doesn't look nice for me. The logo of Kubuntu is too big and the colors are not the true colors of the Kubuntu Boot up screen.
View 2 RepliesOn last boot it was fine but now it is showing 800X600 which is too low . How to adjust it
View 9 Replies View RelatedHave just installed my frist linux os and the screen has a big black border around it. Set the res on install to 1024x768 & this is displayed in display settings. If I run xrandr in a shell tool it only shows 640x480 available.xorg.conf has "1024x768" "800x600" & "640x480" available.Have search the web but nothing I've found works.
View 14 Replies View RelatedI've been trying for very long now to adjust my screen resolution to my desired setting. So far, no luck. Just today I went in to examine what my xorg.conf looked like and this is what I saw.
Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
[Code].....
I have an HTPC mini computer, in which I've just installed Ubuntu 10.4 Lucid Lynx, and I tried all screen resolutions I could possibly use through the settings. And the top, bottom, left & right hand sides are out of the resolution. So for example the top and bottom taskbars are out of the screen. I'll be posting a photo later on today to show you people exactly what I mean. So that I can have Ubuntu's screen would fit all inside my LCD screen ? The HTPC runs an nVidia graphics card.
View 3 Replies View RelatedSuffering from the expected error in detecting my video properly when installed 11.3.Have intel 915G onboard video. Up until 11.1 Opensuse struggled with loading this correctly. in 11.1 & 11.2 all was well. A couple of minor tweaks in sax2 and it worked perfectly. Now hat sax2 has gone I'm not sure how to make these minor tweaks.
My problem is I have been forced to a screen resolution of 1024X768 VGA Following the readme file adding nomodeset at boot fixes the problem but of course forces me back to an old video driver with pretty poor performance. Is there any way I can change the screen resolution and set the correct monitor - any GUI replacement for sax2? Krandrtray will only let me set a max res of 1024x768. I need to set res to 1280x1024
The last update for 10.04 has really screwed my desktop. Several of the icons are off the bottom of the screen. All icons are too large. Can't adjust the screen resolution. Panel at the bottom when placed in autohide is so sensitive that it is almost impossible to use. Jumps up and down like a flea on a hot stove. I have reduced the sensitivity of the mouse to the minimum with no effect. There is no excuse for so many troublesome updates. The problem with using an external monitor with a laptop has never been resolved by Ubuntu.
View 3 Replies View RelatedCan I adjust the screen resolution like windows system? Fedora 14.
View 6 Replies View RelatedI booted Hardy, because Karmic detects no screen, after trying to adjust to a previously recognized resolution. As good as it is, does it seem like some basic computer functions just do NOT improve?
View 2 Replies View RelatedI have just did a fresh install of Ubuntu 10.04 to a computer with a generic, low end, on board graphics card. It will not allow me to change the resolution to something other than 800x600 or lower. 8.04 allowed me to set the resolution to as high as 1600x1200 using the same monitor/graphics card.
View 4 Replies View Relatedwhy both ubuntu and centos 5.4 will only give me 800x600 resolution on my monitor when opensolaris immediately gives me 1280x1024?The first time I tried ubuntu it gave me 1280x1024 and now will only make 800x600...This is a viewsonic VG930M Monitor..
View 4 Replies View RelatedI have a problem with my graphics (exactly this one: [URL] I've got an Intel 845G chipset and a LG Flatron F900P monitor.A friend of mine convinced me to try ubuntu and I installed the 10.10 version. Everything (except the monitor's resolution) works all right.
My computer is: IBM Net Vista 8305-21G
Chipset: FRU PN 49P1599 (Intel 845G)
I am installing CentOS 5.6 on an old PC with a small LCD monitor. Anaconda did not determine that the resolution of the monitor is limited and it configured the display to 1280 x 1024 which is out of range for the monitor. So I connected a different monitor and completed the install then set the resolution to 1024 x 768 which the monitor should accept. I connected the small monitor but it still displays "OUT OF RANGE" when the PC boots.
I then connected to the PC over ssh and changed /etc/inittab to start in runlevel 3 and rebooted the PC. At the moment I am downloading the necessary updates with yum and pondering the problem. Some Internet searching tells me that I can adjust the resolution with Xconfigurator. That beings back old memories of Red Hat 7.x.
However, Xconfigurator is not present on the CentOS 5.6 install. So... short of shutting down the PC I am on now and transferring the monitor back to the old PC and trying another resolution etc. Is there a way to change the resolution without running the gnome gui and using the System; Preferences;Display Resolution tool? I am not running any proprietary video drivers on the PC.
How to adjust resolution in Mandriva 2009.1?
View 2 Replies View RelatedI'm trying to install Ubuntu Desktop 10.10 on an Intel Atom mainboard (Intel D945GCLF2) with CRT that has been running Ubuntu 9.x previously.
Both, Desktop live CD / installer and alternate install CD cause the screen to go black (and the status LED blinks).
I was able to get a bit further into the boot process with nomodeset as parameter with the Live CD, unfortunately I can't pass GRUB any parameters now that I have used the alternate Install CD by pressing 'e', it just boots.
So now I have Ubuntu installed, I get a terminal with CTRL-ALT-F1 but I don't know what I need to do now or how to adjust resolution or video settings from command line.
Firstly when I first installed Ubuntu on my machine, the bootscreen logo was small and high resolution, and it looked nice, however as I started using Ubuntu I must have done something for it to change to large and low resolution.
I try the live cd again and that one is normal, so it must be my settings.. and also when I am shutting down, the screen shows some messages I can't read because it's kind of fast, and the messages are kind of low res too.
The odd time I boot my laptop the screen resolution will change to 1024x768 and I would have to change it back to 1200x800. Not only that but I would have to move all the applets on the panel, to where they were.
This has been happening since I've first installed Ubuntu 7.10 and continues to 10.04.
Here's some information about my screen. sudo lshw -C video:
Code:
*-display:0
description: VGA compatible controller
product: Mobile 4 Series Chipset Integrated Graphics Controller
vendor: Intel Corporation
[Code]....
I have windows installed through virtual Box now but i have some questions. When i make it full screen it goes full screen but Windows stays in the middle of the screen small and doesn't adjust to the full screen. Can you make windows completely take up the full screen Can i access folders on my ubuntu drive ? i have a file in downloads i want in windows but don't want to reinstall it
View 4 Replies View RelatedI tried to fix splash screen resolution on boot up in 10.04 from instructions I found on the net. I updated lines in grub. Now when I boot I see the dual boot menu but hit linux i just get a black screen. I can't get into my system from there.
View 7 Replies View RelatedWell, this has happened numerous times before when I had other distros, Ubuntu, Mint,and even Fedora, and then it didn't bother me because I had a GUI and a Desktop Manager, but now it's become a bit of a problem. I can read it okay, but I'd like to have it full resolution again. I'll post a link below
[URL]
Not easy to see what I typed, but I've tried adding "vga=773" to my kernel line but it didn't help. What do I do? *I hope I'm not being incoherent*
I've just installed 10.04 on my Dell Latitude D830 with a NVIDIA Quadro NVS 140M; upon booting Ubuntu asked me to install the official NVIDIA driver (latest) so I went ahead and installed it, now the boot splash screen is in about 640x480/800x600 rather than the usual 1920x1200 it was when I first booted.
View 4 Replies View RelatedI have just bought a new Acer 23" 1920x1080 flatscreen. I used to have an old fashioned 1280x1024 flatscreen.Now the problem is, every single time when I log on Ubuntu resets my screen res. to 1280x1024. So every time I have to use the Nvidia Settings to set my screen res to 1920x1080 and every time I have to place my panel widgets back in the right place and order, because of that, which is quite annoying.GDM has no problems though, it always displays in the right resolution.I use a Nvidia GeForce 6200 graphics card and the nvidia-current driver on Ubuntu 10.04 i386. I cannot use the Gnome monitors manager to set my resolution. Every time it sends me to Nvidia Settings.This is my Xorg.conf;
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010
[code]....
I am using FC10. how do I change the resolution of the "Boot Up" screen? My monitor is 1024x768 capable but my boot screen is 1280x1024. I don't get anything until it finally loads X Windows. When my machine is booting up I cannot see the screen because my monitor can't handle it. When I hook it up to my other monitor (1280x1024 capable) I can see the boot up screen. I'd like to be able to see the boot screen in case there are any errors I need to se. How do I change it?
View 1 Replies View RelatedI have tried this with many different configurations, however, I believe that the scroll bar that shows the progress of the boot is preventing it from changing successfully. I don't know how to switch it off. X is not installed. No gui, only tui.
View 5 Replies View Relatedi changed the boot up resolution in the boot up loader to 1366*768 (native res of my monitor) the boot option is still set to quiet splash however, instead of showing the progress bar, it would now always display the complete boot up log ( the list of starting services and such) i then manually changed the boot option from to 1024*768 at boot loader screen, and teh splash would show up, but then on next boot up if i stick with 1366*768, it doesnt work again
View 4 Replies View RelatedI cannot adjust the screen brightness in the power management menu. I can access the window and move the scroll bar, but there is no change.
I am on v 10.04 32bit , a Benq joybook s35.
It was working just fine on the previous version of ubuntu.
My computer (Samsung R580 N330M)seems doesnot adjust brightness both power manager and configuration file in /proc, I tried NVIDIA setting and it works,but I think it changes the color,not LCD. is it caused by driver problems?
View 3 Replies View RelatedI'm trying to play Regnum Online on a netbook and windows is way too big for the screen, and it wont let me resize it
View 5 Replies View RelatedWhen I installed 10.04 in April, I started having all sorts of problems with my Virtual Terminals (CTRL-ALT-F*). First they were inaccessible completely, then they were there, but not visible, i.e. I could use them to login and run commands, but there was no screen output, then they were gone again, and the fight just went on and on. I just recently got this functionality back after months just messing around, testing different peoples solutions, and really just not being afraid to break the whole thing. Ultimately, it boiled down to nVidea graphics driver problems.
However, now I notice that outside of gdm, the screen is not aligned properly. It seems to be about 2 characters to the left and several lines lower than it should be on VT1-VT6, while gnome is aligned perfectly. I can use my screens auto-adjust to fix the problem, but when I switch to another terminal, the problem comes back. It's not really a huge deal, but after all this trouble, I really just want them to work the way they are supposed to work. Does anyone know of a way to set the screen alignment via software, or am I just stuck dealing with it?
Running F14 on Dell Studio 14 with LCD screen and US keyboard selected. After initial power on the keyboard selection of "Windows Key" + F4 will dim the screen and the "Windows Key" + F5 will brighten the screen. When being used, either combination will also show a meter on the screen to display the adjustment of the brightness. When the lid is closed the computer is set to suspend by default. After the computer is brought back from suspend the keyboard short cuts no longer control the brightness and the meter does not appear on the screen. I have not found any other way to control the brightness and I have to restart to get the keyboard short cuts to work again.
View 5 Replies View Related