Ubuntu :: Adjust Screen Resolution On Samsung 40" LCD
Jul 19, 2010
I have an HTPC mini computer, in which I've just installed Ubuntu 10.4 Lucid Lynx, and I tried all screen resolutions I could possibly use through the settings. And the top, bottom, left & right hand sides are out of the resolution. So for example the top and bottom taskbars are out of the screen. I'll be posting a photo later on today to show you people exactly what I mean. So that I can have Ubuntu's screen would fit all inside my LCD screen ? The HTPC runs an nVidia graphics card.
I just want to know how to adjust the screen resolution of my boot up screen. My PCs maximum resolution is 1366x768 but I think my boot up screen only uses 600x400. I doesn't look nice for me. The logo of Kubuntu is too big and the colors are not the true colors of the Kubuntu Boot up screen.
Have just installed my frist linux os and the screen has a big black border around it. Set the res on install to 1024x768 & this is displayed in display settings. If I run xrandr in a shell tool it only shows 640x480 available.xorg.conf has "1024x768" "800x600" & "640x480" available.Have search the web but nothing I've found works.
I've been trying for very long now to adjust my screen resolution to my desired setting. So far, no luck. Just today I went in to examine what my xorg.conf looked like and this is what I saw.
Suffering from the expected error in detecting my video properly when installed 11.3.Have intel 915G onboard video. Up until 11.1 Opensuse struggled with loading this correctly. in 11.1 & 11.2 all was well. A couple of minor tweaks in sax2 and it worked perfectly. Now hat sax2 has gone I'm not sure how to make these minor tweaks.
My problem is I have been forced to a screen resolution of 1024X768 VGA Following the readme file adding nomodeset at boot fixes the problem but of course forces me back to an old video driver with pretty poor performance. Is there any way I can change the screen resolution and set the correct monitor - any GUI replacement for sax2? Krandrtray will only let me set a max res of 1024x768. I need to set res to 1280x1024
The last update for 10.04 has really screwed my desktop. Several of the icons are off the bottom of the screen. All icons are too large. Can't adjust the screen resolution. Panel at the bottom when placed in autohide is so sensitive that it is almost impossible to use. Jumps up and down like a flea on a hot stove. I have reduced the sensitivity of the mouse to the minimum with no effect. There is no excuse for so many troublesome updates. The problem with using an external monitor with a laptop has never been resolved by Ubuntu.
I am running Ubuntu 9.10 on a new HP PC (Pavilion p6240f PC).This came with an Intel GMX X4500 Integrated graphics.My monitor is Samsung SyncMaster 2333. Initially I got a very bad resolution, Later I edited /etc/X11/xorg.conf (created the file) and added the following.
I'm trying to configure my display on Ubuntu, but I'm getting problems to define the screen resolution. The native resolution for FX2490HD is 1920x1080, but Ubuntu only recognizes 1360x768. Following a recipe[1] that uses xrandr I can setup 1920x1080, but the image looks strange. In this mode, I see shadows behind the blurred letters. This is the code that I typed to follow the recipe:
I booted Hardy, because Karmic detects no screen, after trying to adjust to a previously recognized resolution. As good as it is, does it seem like some basic computer functions just do NOT improve?
I have just did a fresh install of Ubuntu 10.04 to a computer with a generic, low end, on board graphics card. It will not allow me to change the resolution to something other than 800x600 or lower. 8.04 allowed me to set the resolution to as high as 1600x1200 using the same monitor/graphics card.
why both ubuntu and centos 5.4 will only give me 800x600 resolution on my monitor when opensolaris immediately gives me 1280x1024?The first time I tried ubuntu it gave me 1280x1024 and now will only make 800x600...This is a viewsonic VG930M Monitor..
I have a problem with my graphics (exactly this one: [URL] I've got an Intel 845G chipset and a LG Flatron F900P monitor.A friend of mine convinced me to try ubuntu and I installed the 10.10 version. Everything (except the monitor's resolution) works all right.
My computer is: IBM Net Vista 8305-21G Chipset: FRU PN 49P1599 (Intel 845G)
I am installing CentOS 5.6 on an old PC with a small LCD monitor. Anaconda did not determine that the resolution of the monitor is limited and it configured the display to 1280 x 1024 which is out of range for the monitor. So I connected a different monitor and completed the install then set the resolution to 1024 x 768 which the monitor should accept. I connected the small monitor but it still displays "OUT OF RANGE" when the PC boots.
I then connected to the PC over ssh and changed /etc/inittab to start in runlevel 3 and rebooted the PC. At the moment I am downloading the necessary updates with yum and pondering the problem. Some Internet searching tells me that I can adjust the resolution with Xconfigurator. That beings back old memories of Red Hat 7.x.
However, Xconfigurator is not present on the CentOS 5.6 install. So... short of shutting down the PC I am on now and transferring the monitor back to the old PC and trying another resolution etc. Is there a way to change the resolution without running the gnome gui and using the System; Preferences;Display Resolution tool? I am not running any proprietary video drivers on the PC.
I've a Samsung SyncMaster 943, widescreen I also have a GForce 8400 GS This monitor supports (as seen on website) a 1440*900 resolution. I've installed the nvidia driver (from homepage) with version 195.36.24 The NVidia X Server Settings shows only a 1360*768 as max possible resolution. So, I've edited xorg.conf, restarted PC but got no luck... here it is my xorg.conf
I'm trying to install Ubuntu Desktop 10.10 on an Intel Atom mainboard (Intel D945GCLF2) with CRT that has been running Ubuntu 9.x previously. Both, Desktop live CD / installer and alternate install CD cause the screen to go black (and the status LED blinks).
I was able to get a bit further into the boot process with nomodeset as parameter with the Live CD, unfortunately I can't pass GRUB any parameters now that I have used the alternate Install CD by pressing 'e', it just boots.
So now I have Ubuntu installed, I get a terminal with CTRL-ALT-F1 but I don't know what I need to do now or how to adjust resolution or video settings from command line.
I have windows installed through virtual Box now but i have some questions. When i make it full screen it goes full screen but Windows stays in the middle of the screen small and doesn't adjust to the full screen. Can you make windows completely take up the full screen Can i access folders on my ubuntu drive ? i have a file in downloads i want in windows but don't want to reinstall it
Trying to set to native resolution of 1360x768 with error "Failed to get size of gamma for output default":
Code: Select allerik@DRAGON:/var/log$ xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1360 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 61.00* 800x600 61.00
[Code] ....
Found these lines in /var/log/kern.log stating "unknown Kepler chipset":
Code: Select allJul 26 17:35:34 DRAGON kernel: [ 15.510099] nouveau ![ DEVICE][0000:03:00.0] unknown Kepler chipset Jul 26 17:35:34 DRAGON kernel: [ 15.510148] nouveau E[ DEVICE][0000:03:00.0] unknown chipset, 0xb06070b1 Jul 26 17:35:34 DRAGON kernel: [ 15.510191] nouveau E[ DRM] failed to create 0x80000080, -22 Jul 26 17:35:34 DRAGON kernel: [ 15.510419] nouveau: probe of 0000:03:00.0 failed with error -22
Google search yielded this bug, which affected GT 730 graphics cards, apparently patched in Linux 3.19:
[URL] ....
Assuming this is the problem, does this mean I have to upgrade to Testing or install proprietary drivers?
My computer (Samsung R580 N330M)seems doesnot adjust brightness both power manager and configuration file in /proc, I tried NVIDIA setting and it works,but I think it changes the color,not LCD. is it caused by driver problems?
When I installed 10.04 in April, I started having all sorts of problems with my Virtual Terminals (CTRL-ALT-F*). First they were inaccessible completely, then they were there, but not visible, i.e. I could use them to login and run commands, but there was no screen output, then they were gone again, and the fight just went on and on. I just recently got this functionality back after months just messing around, testing different peoples solutions, and really just not being afraid to break the whole thing. Ultimately, it boiled down to nVidea graphics driver problems.
However, now I notice that outside of gdm, the screen is not aligned properly. It seems to be about 2 characters to the left and several lines lower than it should be on VT1-VT6, while gnome is aligned perfectly. I can use my screens auto-adjust to fix the problem, but when I switch to another terminal, the problem comes back. It's not really a huge deal, but after all this trouble, I really just want them to work the way they are supposed to work. Does anyone know of a way to set the screen alignment via software, or am I just stuck dealing with it?
Running F14 on Dell Studio 14 with LCD screen and US keyboard selected. After initial power on the keyboard selection of "Windows Key" + F4 will dim the screen and the "Windows Key" + F5 will brighten the screen. When being used, either combination will also show a meter on the screen to display the adjustment of the brightness. When the lid is closed the computer is set to suspend by default. After the computer is brought back from suspend the keyboard short cuts no longer control the brightness and the meter does not appear on the screen. I have not found any other way to control the brightness and I have to restart to get the keyboard short cuts to work again.
I have a low end 7" CnMBook running modified Debian OS. Is there any way to adjust the screen brightness, if possible by adding a Fn command Up and Down?
I have just upgraded to xubuntu 10.04 and although some function keys are working (like volume control), the screen brightness function keys aren't (the screen brightness is at top level and can't be reduced)Notes:I am using a Compaq 610 laptopThe brightness keys are working on Ubuntu 10.04 (live session)How can I fix this?, and at least is there any other way to adjust screen brightness?
I have recently installed ubuntu on a Dell Inspiron 8500. It works well but the startup volume on the ubuntu splash screen is extremely loud. How do I adjust this. System volume does not seem to help.
When I first install debian I couldn't change the screen brightness at all not manually nor with function keys, but I tried some of the solutions I found on the internet and now I can change the brightness manually (from the power management or the battery icon) but when I use the function keys it takes them like 2 to 3 minutes to respond and cause the system to hang (even mouse curser not responding) and then I'm forced to manually reboot the system, here is some information :
Code: Select all$ ls /sys/class/backlight/ acpi_video0 intel_backlight
Code: Select all$cat /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration'
According to the display properties in GNOME, its showing as 1366x768, which is what I normally use. Problem is, in fedora, all the text and buttons and everything is huge! Heres a screenshot attached showing what I mean. The resolution is fine (i'm using a samsung 40" and native is 1366x768, but in the display properties its called a samsung 72".
I reduced the text size in appearance preferences to 6 instead of 10 and took the screenshot. If I had left it at 10 everything else would have been huge. how I can fix this? Fedora 11 installation went flawless on my hardware this time, and previous versions never finished installing, so I kept using windows.