I have just did a fresh install of Ubuntu 10.04 to a computer with a generic, low end, on board graphics card. It will not allow me to change the resolution to something other than 800x600 or lower. 8.04 allowed me to set the resolution to as high as 1600x1200 using the same monitor/graphics card.
View 4 Replies
On last boot it was fine but now it is showing 800X600 which is too low . How to adjust it
View 9 Replies View Relatedwhy both ubuntu and centos 5.4 will only give me 800x600 resolution on my monitor when opensolaris immediately gives me 1280x1024?The first time I tried ubuntu it gave me 1280x1024 and now will only make 800x600...This is a viewsonic VG930M Monitor..
View 4 Replies View RelatedI just want to know how to adjust the screen resolution of my boot up screen. My PCs maximum resolution is 1366x768 but I think my boot up screen only uses 600x400. I doesn't look nice for me. The logo of Kubuntu is too big and the colors are not the true colors of the Kubuntu Boot up screen.
View 2 Replies View RelatedI have a problem with my graphics (exactly this one: [URL] I've got an Intel 845G chipset and a LG Flatron F900P monitor.A friend of mine convinced me to try ubuntu and I installed the 10.10 version. Everything (except the monitor's resolution) works all right.
My computer is: IBM Net Vista 8305-21G
Chipset: FRU PN 49P1599 (Intel 845G)
Have just installed my frist linux os and the screen has a big black border around it. Set the res on install to 1024x768 & this is displayed in display settings. If I run xrandr in a shell tool it only shows 640x480 available.xorg.conf has "1024x768" "800x600" & "640x480" available.Have search the web but nothing I've found works.
View 14 Replies View RelatedI am installing CentOS 5.6 on an old PC with a small LCD monitor. Anaconda did not determine that the resolution of the monitor is limited and it configured the display to 1280 x 1024 which is out of range for the monitor. So I connected a different monitor and completed the install then set the resolution to 1024 x 768 which the monitor should accept. I connected the small monitor but it still displays "OUT OF RANGE" when the PC boots.
I then connected to the PC over ssh and changed /etc/inittab to start in runlevel 3 and rebooted the PC. At the moment I am downloading the necessary updates with yum and pondering the problem. Some Internet searching tells me that I can adjust the resolution with Xconfigurator. That beings back old memories of Red Hat 7.x.
However, Xconfigurator is not present on the CentOS 5.6 install. So... short of shutting down the PC I am on now and transferring the monitor back to the old PC and trying another resolution etc. Is there a way to change the resolution without running the gnome gui and using the System; Preferences;Display Resolution tool? I am not running any proprietary video drivers on the PC.
I've been trying for very long now to adjust my screen resolution to my desired setting. So far, no luck. Just today I went in to examine what my xorg.conf looked like and this is what I saw.
Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
[Code].....
I have an HTPC mini computer, in which I've just installed Ubuntu 10.4 Lucid Lynx, and I tried all screen resolutions I could possibly use through the settings. And the top, bottom, left & right hand sides are out of the resolution. So for example the top and bottom taskbars are out of the screen. I'll be posting a photo later on today to show you people exactly what I mean. So that I can have Ubuntu's screen would fit all inside my LCD screen ? The HTPC runs an nVidia graphics card.
View 3 Replies View RelatedSuffering from the expected error in detecting my video properly when installed 11.3.Have intel 915G onboard video. Up until 11.1 Opensuse struggled with loading this correctly. in 11.1 & 11.2 all was well. A couple of minor tweaks in sax2 and it worked perfectly. Now hat sax2 has gone I'm not sure how to make these minor tweaks.
My problem is I have been forced to a screen resolution of 1024X768 VGA Following the readme file adding nomodeset at boot fixes the problem but of course forces me back to an old video driver with pretty poor performance. Is there any way I can change the screen resolution and set the correct monitor - any GUI replacement for sax2? Krandrtray will only let me set a max res of 1024x768. I need to set res to 1280x1024
How to adjust resolution in Mandriva 2009.1?
View 2 Replies View RelatedThe last update for 10.04 has really screwed my desktop. Several of the icons are off the bottom of the screen. All icons are too large. Can't adjust the screen resolution. Panel at the bottom when placed in autohide is so sensitive that it is almost impossible to use. Jumps up and down like a flea on a hot stove. I have reduced the sensitivity of the mouse to the minimum with no effect. There is no excuse for so many troublesome updates. The problem with using an external monitor with a laptop has never been resolved by Ubuntu.
View 3 Replies View RelatedCan I adjust the screen resolution like windows system? Fedora 14.
View 6 Replies View RelatedI'm trying to install Ubuntu Desktop 10.10 on an Intel Atom mainboard (Intel D945GCLF2) with CRT that has been running Ubuntu 9.x previously.
Both, Desktop live CD / installer and alternate install CD cause the screen to go black (and the status LED blinks).
I was able to get a bit further into the boot process with nomodeset as parameter with the Live CD, unfortunately I can't pass GRUB any parameters now that I have used the alternate Install CD by pressing 'e', it just boots.
So now I have Ubuntu installed, I get a terminal with CTRL-ALT-F1 but I don't know what I need to do now or how to adjust resolution or video settings from command line.
I booted Hardy, because Karmic detects no screen, after trying to adjust to a previously recognized resolution. As good as it is, does it seem like some basic computer functions just do NOT improve?
View 2 Replies View RelatedBarebones installation. Manually start x with 'startx'. For some weird reason, the resolution randomly sets to either 1024x768 or 800x600. How do I permanently set a resolution?
View 1 Replies View RelatedI'm running 10.10. I have a Nvidia GTX 460. My actual resolution is only 1024x768. I can't get the native resolution (1280x1024). Nvidia-settings does not show this resolution. Google hasn't helped at all so far, and I have installed the Nvidia Driver.
View 2 Replies View RelatedI searched the archives and didn't find anything on this, and was just wondering if there is a problem if you load Ubuntu 9.1 and have a display that's higher than 1024x768. I'd prefer a machine with a higher res, but I've heard that Ubuntu will only go as high as 1024x768.I'm guessing, however, that by 9.1, it should recog the higher res while loading and it won't be a problem, but thought I'd check before shelling out on a machine with a nicer display.
View 9 Replies View RelatedWhen I boot my computer I get this message: Warning Pc video resolution is out of range Change setting to recommended resolution 1280x1024 @60mh So I hit ctrl alt f1 I typed in Sudo dpkg-reconfigure xserver-xorg Nothing happens. It's been very frustrating because with everything that I've looked up it says that it's suppose to guide me through something. I desperately need my computer for school.
View 8 Replies View RelatedI was evaluating a live distro on a USB drive and the resolution got changed from my normal 1680X1050 to 1024X768. I normally run SuperOS (ubuntu derivative) at 1680X1050 on my 22" LCD flatscreen monitor. The users manual for the monitor says that the optimum resolution is 1680X1050. Now when I go to system, preferences, monitors the monitor is unknown and the highest resolution that is available is 1360X768. I have clicked on Detect Monitors but not sure anything is happening. I have went to system, administration, additional drivers but none show up. The OSD menu for the monitor is showing 1380X768. I haven't been able to make any changes to the setting. I push the button that is supposed to get me into the sub-menu but nothing happens.
View 3 Replies View RelatedI just recently installed Xubuntu 11.04 and I want to adjust the brightness levels. I tried using the corresponding buttons on my laptop, but they aren't working. Where can I find the brightness settings on the OS?
I tried this thread: [URL] , but "Power Manager" didn't have that setting.
I cannot adjust the screen brightness in the power management menu. I can access the window and move the scroll bar, but there is no change.
I am on v 10.04 32bit , a Benq joybook s35.
It was working just fine on the previous version of ubuntu.
I know many apps have their own independent volume controls, but not all do. Is there any way to control this in a similar manner as Windows 7?
View 4 Replies View RelatedIf one right-clicks on the date and time tab in Ubuntu 10.10 desktop, then there is no obvious way to change the time. If one right-clicks and goes to help, then the explanation for changing time is as follows under the category 'usage':
2.3. To Adjust the System Date or Time.
To adjust the system date or time that the Clock applet displays, perform the following steps:
1. Right-click on the applet, then choose Adjust Date & Time.
2. Type the root password, then click OK.
3. The Clock applet starts the system tool that sets the system date and time. Use the tool to adjust the date and time.
The actual way to do this is as follows:
Right-click on the date and time applet. select preferences, and down at the bottom of the window that opens push the 'time settings' button.
Then you will be able to adjust that date and time.
I'm having trouble with my mouse wheel. On one click, it pulls down to the halfway point. This leaves me with either dragging the bar around on the right hand side, or using the touch pad. this is a new (to me) notebook, which I haven't had for long. I just can't find where to adjust the sensitivity.
View 1 Replies View RelatedDoes anyone know of a way I can adjust the size of a partition in KDE down to the exact size of the files on it so there is no blank space?
View 4 Replies View RelatedMy computer (Samsung R580 N330M)seems doesnot adjust brightness both power manager and configuration file in /proc, I tried NVIDIA setting and it works,but I think it changes the color,not LCD. is it caused by driver problems?
View 3 Replies View RelatedUbuntu 10.04 lucid with gnome-power-manager installed on a HP elitebook 8530p. FN keys and desktop display applet will not adjust the display. when I first boot my display is pretty bright with either it plugged into ac or not until i either plug or unplug for the first time then the display dims some, but will not get bright again plugged or unplugged, also /proc/acpi/video/DGFX/LCD/brightness shows it set to 100% at all times it never changes. I'm using the ati driver tried running aticonfig --acpi-services off, but it made no difference. It worked fine in karmic and ibex. I'm out of ideas on how to fix this one. Can anyone point me in the right direction on what to try next?
View 5 Replies View RelatedI want to adjust clock in ubuntu. When I installed it it asked about location and setting if for asia it automatically take the clock, but that timing is not correct. It showed 10 pm when actually it was 5pm. After installation I tried it to adjust but it could not be managed..it automatically took that previous timing.
View 4 Replies View RelatedI've installed Ubuntu 9.10-karmic koala-and all runs good except screen resolution. I don't have any graphic card, and with windows I never had problems...but with linux max resolution is 800x600. what can I do to set a resolution of 1024x760 or similar ?
View 2 Replies View Related
