I just installed a fresh copy of Xubuntu 10.10 on a penstick and everything was working fine at work and at home. Now when I got to the work this morning I connected the stick to my office network and I got this error: PHP Code:
[Code]..
I just installed a fresh copy of Xubuntu 10.10 on a penstick and everything was working fine at work and at home. Now when I got to the work this morning I connected the stick to my office network and I got this error:
PHP Code:
Could not look up internet address for localhost.localdomain.This will prevent Xfc from operating correctly.It may be possible to correct this problem by adding localhost.localdomain to the file /etc/hosts on your system
Why did this error present itself if nothing was changed? All that was done was that is was tested at work and at home.
I was thinking of creating an extremely minimal version of Xubuntu using XFCE. I have a Dell Mini 9, a netbook that uses a wireless-g card requiring bcmwl-kernel-source to work.What I would like to do is use either the alternate CD or mini.iso minimal install file to perform a command line install-style installation of the system.So far, what I am thinking (from reading this [url].... article:
HTML Code:
http:[url].....is to start off with these packages to begin with:
xorg
slim (if possible with 9.10, unsure if it is still available. in short, i want to use a lightweight display manager)
xfce4
xfce4-goodies
xubuntu-default-settings
bcmwl-kernel-source
aptitude
My opening questions are: Should I go with mini.iso or the Xubuntu Alternate Install CD (or the Ubuntu one)? If so, which one? What additional packages will I need to make the hardware accessible and fully functional? All I can think of so far would be sound (I'd like to stay away from PulseAudio if possible, it wreaks havoc with my computer), my webcam, and the memory card slot, if additional packages are needed for it?What other "core" packages should I include in this list? Should I include Synaptic, or other packages, and why?What do I need to take into consideration, since this is both a directly- and battery-powered computer?
HTML Code:
http://ubuntuforums.org/showthread.php?t=1155961
post regarding a "Ubuntu-Desktop-Minimal"-type system.
After installing ubuntu, if one wants to try other desktop variants, whether installing KDE-desktop / XFCE-desktop over ubuntu is the same as installing Kubuntu / Xubuntu over ubuntu? If not, what is the difference, which is better?
View 9 Replies View RelatedI have a netbook with Ubuntu 10.04 installed on it, then I installed the netbook-launcher via synaptic. I then installed xfce4 from synaptic (not xubuntu-desktop). What's the difference,if any, between installing xubuntu,and installing ubuntu then installing xfce?I know that the themes, splash, gdm theme, and default apps are different. But is that it? Is my system still effectively Ubuntu?
View 7 Replies View RelatedIs it possibile to update XFCE from 4.6 to 4.8 in Xubuntu 10.04 64 bit?It seems like every guide on the internet refers only to 10.04 32 bit release, 10.11 (32 and 64bit), but no Lucid 64 bit!
View 1 Replies View RelatedXubuntu 11.04 is skinned to how Canonical felt it would be best, now I do like it, but I was wondering if there is a way to get XFCE to the way it actually looks by removing all skinning?
View 5 Replies View RelatedI know I can have the gnome desktop on my server by typing:
sudo apt-get install ubuntu-desktop
But can I install the xubuntu (XFCE) desktop instead?
I installed Xubuntu 10.10, fresh i don't configure or installed another program, i only installed nvidia drivers (I have a Geforce 9600 GT video card). The entire operating system, and xfce 4.6 was working fine. After, I make an upgrade to xfce 4.8, and when i loged on, everything loaded ok: xfce 4.8 version is working fine, the panels loaded and i can add items.
But there is a problem: My wallpaper image doesn't appear on desktop (only brown solid color), it doesn't show icons, i can't change wallaper in configuration panel (i can add an image but it does not appear in desktop), when I plug in a pendrive usb icon does no appear. And when I right click on the deadspace on the background the right click menu does not come up.
When i open desktop folder in thunar there is information, but icon files does not appear in desktop I thing that maybe is a setting that i can solve typing something in terminal, but i don't know what, i searched in google and in this forum and i found only one post but not related to xfce 4.8 and it was not useful[URL]...
When trying to make my Xfce desktop in Debian 7 (wheezy) look the same way as in Xubuntu 12.04 (precise), I am able to (by copying some files from Xubuntu packages) make the fonts render the same way, set up the same desktop and icon themes etc and make everything look identical, with the exception of the fonts...
Since that, if I choose the font "Sans 10" for my desktop, in Debian - with all the same anti-aliasing options, and such, that I use in Xubuntu - the text looks smaller, everywhere, compared to Xubuntu.
So... How come this happens, if I have chosen the same font "Sans" with the same size "10"?
Below, are the different results, depending on the OS in question.
In Debian Xfce, I get this:
While, in Xubuntu, I get this:
I remember this same thing happening, once, when I was experimenting with setting up an Openbox desktop environment, on top of an Ubuntu 12.04 command line install, where, if I used LightDM, as the login manager, I would observe this same font size "reduction" (in, at least, some of the applications), with the theme I was trying to set up, while, if I used GDM, as the login manager, I would not observe this same font size reduction. (And, so, it seemed that some GTK library(?), being used by the GDM, prevented this from happening(?)...)
Also, I read somewhere, on the Internet, that Xubuntu builds Xfce on top of GNOME(?) (libraries, I guess)...
Could it be that, by installing some GTK library, the fonts will "return" to normal size? Or, do I have to configure something else, somewhere?
(P.S. - I've also tried choosing the size "11", in Debian Xfce - in case it's a matter of different values used, for the numbers, in each OS - but, if I do so, it only makes the text bigger than in Xubuntu, with the size "10"...)
I'm using ubuntu 11.4 ,during switching bitween ubunu, xubuntu, xfce desktop environment I lost my task bar. now I have no access to all the software.the only icons I can see are the ones I had on the desktop.
View 6 Replies View RelatedI installed xubuntu on my old laptop (Pentium III 650mhz, 256M RAM), and when I try to boot up, it will only load from the disc
I get an error saying hit F1 to try again, F2 to change boot options ..
Ubuntu doesn't load. While booting, it displays an error message saying some of the lists in ipblock couldn't be loaded, followed by a red-coloured "[fail]". Then, the screen goes black and shows nothing more. So, how do I stop ipblock from starting at startup (from the command line)?
View 9 Replies View RelatedI can boot xubuntu fine in kernel 2.6.32.25, but nothing newer. When I try to boot in a later kernel, I get a bunch of scrolling text, followed by a text based login prompt that doesn't work.I've been running xubuntu on this computer since version 8.04. I've had this problem since I upgraded to version 10.04. I figured an update would fix it, so I just made do. I figured for sure when the next upgrade came out it would be fixed, but I upgraded to 11.04 and still have the same problem. I figured somebody else would have had this problem by now and posted a solution, but I haven't found one, either on this forum or even on a google search.
It's an old compaq with 236 megs of memory.I just noticed that, while ubuntu used to require at least 256 megs of memory, and xubuntu was for older computers with as few as 192, I believe, xubuntu now requires 256. Is that my problem? Should I be looking at a different distro now?
I would like to modify the splash screen that you see when booting up Xubuntu 10.10. I want something light. What dimesions should I have it at like 800X600 1280X768 and etc. I will be using this on many different resolutions. Also where does the splash reside on this build?
View 2 Replies View RelatedI want to make a DVD with Ubuntu, Kubuntu, and Xubuntu so i can choose one to start a live session when booting from the disc. I'd like to introduce linux to friends and having a few variations might make it easier to transition.
View 3 Replies View Relatedi decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
using Xubuntu 9.10 on a Dell GX270, 500MB memory, Intel 82865G integrated graphics.On logging in, I get an Xsession error -- unless I hit Esc, as soon as the initial splash screen (the one with a bundle of mosquitos buzzing around each other) appears. This is iffy -- I have to time it right. The .xsession-errors file produced has the following in it:
Code:
/etc/gdm/Xsession: Beginning session setup...
Setting IM through im-switch for locale=en_US.
[code]....
It there a DVD player for Xubuntu 8.04?I put a DVD in and get this error
View 3 Replies View RelatedI've just installed ubuntu and am trying to install xubuntu desktop. when I run the command: aptitude install xubuntu-desktop...here's what I get:The following new packages will be installed:grub-efi{a}0 packages upgraded, 1 newly installed, 0 to remove and 1 will not be upgraded.Need to get OB/818KB of archives. After unpacking 2269 KB will be used.Do you want to continue ? Yetc etc.
dpkg: error processing /var/cache/apt/archives/grub_ef1_-1ubuntu_i386.deb
trying to overwrite '/usr/bin/grub-mkimage' which is also in package grub-pc
dpkg-deb subprocess paste killed by signal (Broken pipe)
[code]....
I'm trying to install Fallout 1 by Interplay. I have the .ISO of the game.
I've mounted it to a directory I created (/home/temp), using Gmount
But, when I use the GUI, and right click on the "install.exe" and choose Open With Wine. It just opens a terminal, than promptly closes it.
So, I tried to run it in a terminal. I went to the directory where the ISO is mounted, and used the command
wine install.exe
and it gives me:
err:dosmemOSMEM_MapDosLayout Need full access to the first megabyte for DOS mode
Also, when I mount the .ISO using Gmount, I get the error;
An error occured
Murrine configuration option "scrollbar_color" is no longer supported and will be ignored.
I can also open the autorun.exe using wine. But when I click the install button in the autorun menu, it says I have to install DirectX. When I click yes, it gives me the generic windows crash.
"The program your using has encountered a problem and needs to close. yada yada yada."
Choosing 'no' when prompted to install DirectX, just gives me a blank screen, with no response.
Push ESC three times, and my desktop appears again, and everything is responding.
When i install software with the install/delete software program or when i update ubuntu, i get an error.
I was able to update and install software a few days ago. But now i get this weird error:
Code:
I can't get Ubuntu 10.04 to boot for install (to my desktop), it displays the logo then hangs for about a minute and displays the alert dialouge saying "Boot disk error."I've tried multiple CD-Rom drives, burned from multiple computers, with both the desktop and server downloads. I'm down about 10 CDs and 2 DVDs here I've checked their integrity (md5) as well as checked the disk integrity from another computer (laptop) and everything passed. I got xUbuntu to install effortlessly, so I don't know what's causing the problem for Ubuntu. I can even look at the contents of the Ubuntu Server CD from within xUbuntu -- so, I know the disk really should work.
My system specs are pretty basic:
2 x Xeon 2.0Ghz
Tyan S2720 Motherboard
2 Gig (4x512) ECC PC266 RAM
[code]....
why xUbuntu worked and regular Ubuntu won't, and/or maybe what I can do to fix this?
I made an xubuntu disk.loaded it and rewrote my hardrive.on a pretty old averatec laptop. 3/4 of the install it gives a a io error and stops the install.I tried to reinstall from the screen again but got the same error.So I rebooted and it skips everything and goes straight to a grub loading stage 1.5, grub loading error 17. It even skips the live cd.I also tried to do it thru a usb stick but that gets ignored too.
View 3 Replies View RelatedLike for instance, if I have Ubuntu Lucid Lynx installed with XFCE, and it has an applications made for XFCE. will the applications also work on say some other distro like, Wolvix, that is an XFCE-based distro~????
What I am trying to say is: Do applications that are made for XFCE, work on ANY distro that has XFCE installed?
I have encountered a problem with an XFCE Launch Error. Upon first login, if I double click any Thunar related icon or try to launch Thunar from the menu, it will take 20-30 seconds to start. At first it was giving me the following Launch Error: "The folder could not be opened. Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." After successive reboots, I no longer get the Launch Error, but it still takes 20-30 seconds to start Thunar.
This is a new install of OpenSUSE and I did updates. The first two updates I did were required by the update software itself. After that was complete I updated the rest of the recommended packages. I then installed gnome-control-center to get gnome-display-properties so I can adjust my login screen settings. Those are all the updates I have done.
I have poured over other threads about the aforementioned Launch Error, and it seems possible that it is related to message bus security policy or gtk2 settings somewhere.
Is there a way to log XFCE errors or message bus errors to a file for troubleshooting? I would like to find out why and where this is happening.
i installed Xubuntu on my system having a dual boot with Xubuntu and windows xp but when i select to boot on Xubuntu it freezes and gets a message saying that the file hal.dll in system32 cant be found. Before showing me this message i tryed to uninstall the Xubuntu inside from windows xp because several problems showed up after installing Xubuntu. I can boot on windows xp but i cant boot to xubuntu and cant uninstall xubuntu.
View 1 Replies View RelatedI'm getting this error when trying to install Flash:
Went to sources and didn't find a metadata repo. How do I solve this?
I'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating
View 2 Replies View RelatedI am not having a lot of good fortune with Xfce, this time. The LiveCD had a kernal error, and after doing an install, the update chokes on dependency errors. I tried unchecking the problem update files, but then I ended up in a loop that I couldn't find what else was causing these problems. This doesn't seem to be a big problem listed in this forum, so how do I resolve this?
View 2 Replies View Related
