I installed xubuntu on my old laptop (Pentium III 650mhz, 256M RAM), and when I try to boot up, it will only load from the disc
I get an error saying hit F1 to try again, F2 to change boot options ..
Ubuntu doesn't load. While booting, it displays an error message saying some of the lists in ipblock couldn't be loaded, followed by a red-coloured "[fail]". Then, the screen goes black and shows nothing more. So, how do I stop ipblock from starting at startup (from the command line)?
View 9 Replies View RelatedI just installed a fresh copy of Xubuntu 10.10 on a penstick and everything was working fine at work and at home. Now when I got to the work this morning I connected the stick to my office network and I got this error: PHP Code:
[Code]..
I can boot xubuntu fine in kernel 2.6.32.25, but nothing newer. When I try to boot in a later kernel, I get a bunch of scrolling text, followed by a text based login prompt that doesn't work.I've been running xubuntu on this computer since version 8.04. I've had this problem since I upgraded to version 10.04. I figured an update would fix it, so I just made do. I figured for sure when the next upgrade came out it would be fixed, but I upgraded to 11.04 and still have the same problem. I figured somebody else would have had this problem by now and posted a solution, but I haven't found one, either on this forum or even on a google search.
It's an old compaq with 236 megs of memory.I just noticed that, while ubuntu used to require at least 256 megs of memory, and xubuntu was for older computers with as few as 192, I believe, xubuntu now requires 256. Is that my problem? Should I be looking at a different distro now?
I would like to modify the splash screen that you see when booting up Xubuntu 10.10. I want something light. What dimesions should I have it at like 800X600 1280X768 and etc. I will be using this on many different resolutions. Also where does the splash reside on this build?
View 2 Replies View RelatedI just installed a fresh copy of Xubuntu 10.10 on a penstick and everything was working fine at work and at home. Now when I got to the work this morning I connected the stick to my office network and I got this error:
PHP Code:
Could not look up internet address for localhost.localdomain.This will prevent Xfc from operating correctly.It may be possible to correct this problem by adding localhost.localdomain to the file /etc/hosts on your system
Why did this error present itself if nothing was changed? All that was done was that is was tested at work and at home.
I want to make a DVD with Ubuntu, Kubuntu, and Xubuntu so i can choose one to start a live session when booting from the disc. I'd like to introduce linux to friends and having a few variations might make it easier to transition.
View 3 Replies View RelatedI was thinking of creating an extremely minimal version of Xubuntu using XFCE. I have a Dell Mini 9, a netbook that uses a wireless-g card requiring bcmwl-kernel-source to work.What I would like to do is use either the alternate CD or mini.iso minimal install file to perform a command line install-style installation of the system.So far, what I am thinking (from reading this [url].... article:
HTML Code:
http:[url].....is to start off with these packages to begin with:
xorg
slim (if possible with 9.10, unsure if it is still available. in short, i want to use a lightweight display manager)
xfce4
xfce4-goodies
xubuntu-default-settings
bcmwl-kernel-source
aptitude
My opening questions are: Should I go with mini.iso or the Xubuntu Alternate Install CD (or the Ubuntu one)? If so, which one? What additional packages will I need to make the hardware accessible and fully functional? All I can think of so far would be sound (I'd like to stay away from PulseAudio if possible, it wreaks havoc with my computer), my webcam, and the memory card slot, if additional packages are needed for it?What other "core" packages should I include in this list? Should I include Synaptic, or other packages, and why?What do I need to take into consideration, since this is both a directly- and battery-powered computer?
HTML Code:
http://ubuntuforums.org/showthread.php?t=1155961
post regarding a "Ubuntu-Desktop-Minimal"-type system.
i installed Xubuntu on my system having a dual boot with Xubuntu and windows xp but when i select to boot on Xubuntu it freezes and gets a message saying that the file hal.dll in system32 cant be found. Before showing me this message i tryed to uninstall the Xubuntu inside from windows xp because several problems showed up after installing Xubuntu. I can boot on windows xp but i cant boot to xubuntu and cant uninstall xubuntu.
View 1 Replies View Relatedi decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
I am in a situation to boot fedora 15 live cd in to command line mode, not graphical mode, for some testing purpose. how to change argument during booting mode
View 4 Replies View RelatedI've been searching the forums for any posts that cover my problem, but most of the booting problems I've found are different from mine.Anywho, the situation:ell laptop, 2 partitions, first is Windows XP, second is Ubuntu Karmic.Whenever I turn on my computer the first loading screen that shows up (is this the BIOS? Excuse my little knowledge of this stuff), before GRUB loads, is really slow. It takes about a minute to load.However, whenever I restart from my XP partition, it suddenly loads fast! And this does not happen when restarting from my Ubuntu partition or anything
View 7 Replies View RelatedI am using a linux kernel 2.6.36 using mips architecture. I have succesfully booted the machine through Flash memory, but it is not booting through nfs. It is getting stuck at the stage where the image starts loading. In short the vmlinux.img file is being copied properly to nfsroot but the image is not loading.
View 5 Replies View RelatedI am wondering if an Xubuntu user with 10.04 could tell me if Xubuntu uses gdm 2.3 or not
View 2 Replies View RelatedI have Xubuntu 9.10 64bit and Win7 on the same HDD in a duel boot setup. How do I get Xubuntu to see and use the Win7 partition of the drive? I have some video files that I want to watch from my Win7 partition. Also, have they fixed the login screen issues with Ubuntu 9.10 yet? Mine will never log in and this time I simply got lucky and it worked.
View 4 Replies View RelatedIs there a way to make Ubuntu One work on Xubuntu? Without adding a whole lot of gnome?
View 2 Replies View RelatedI am coordinator XFCE Uyghur translation team.https://translations.xfce.org/languages/l/ug/)
I almost finished Uyghur translation for xfce-4.6 stable branch and development branch. now I working on apps .I installed Xubuntu and Ubuntu, bu there is no XFCE Uyghur translations.When I can use this translations in Xubuntu or Ubuntu?
I have the Xubuntu OS, can I install a different kind of Linux OS within the Xubuntu OS?
View 4 Replies View RelatedI use Xubuntu 10.10 on a the Asus Eee PC 900 netbook. After using Ubuntu Desktop, UNR, Lubuntu and PcLinuxOS. So you can easily say I tried a lot of Linux Distros.
Now my problem is that I've tried to run a .exe file with WINE. But Xubuntu gives the error that I can't run the file because it is not marked as a executable. Now I saw somewhere in the Ubuntu Documentation that you have to change the permissions with Properties>Permissions. But in Xubuntu I can' t make the file executable, as in Ubuntu.
need to find the crowd that can help with all my questions. where do xubuntu users go?
View 9 Replies View RelatedI have an MSI netbook with a non-functioning version of Ubuntu (the GUI is GNOME, and currently not working) and I'm trying to replace that with xubuntu. For whatever reason, I cannot get the system to mount the USB key, which currently has nothing on it except for the xubuntu .iso file. My computer is encrypted with sda5_crypt, which comes up and demands a password just after the MSI boot screen. I assume I need to press some kind of key before the sda5_crypt screen, but I'm not sure which button that is. There is an option of pressing F11 for "boot menu", and from there I can select "flash card", but it doesn't do me any good to do that.
View 4 Replies View Relatedhow to use Emerald in XFCE, Note: I've installed Compiz, Fusion, and Emerald, but XFCE just plain refuses to acknowledge their presence.
There must be a script I need to edit somewhere...
This is the BETA version of the latest Xubuntu, by the way...
I'll try to give out as much details as possible but this issue is very troubling.
I used to work with maverick until the final natty xubuntu went online the other day.
So I'm now working with Xubuntu 11.04 amd64 Since i started working with it im experiencing on my PC a serious overheat causing the computer to shut itself down and to my LED screen on the mother board to report more then 100C degrees of the cpu... this never happened before, and after some testing i found out that i only happens in full screen opengl game (Enemy territory- shuts itself after 6 minutes) and full screen flash movie playing (such as mega video- shuts itselfs after 10-15 minutes). I don't use stock cooling im using a arctic freezer 64 pro. and i clean my computer and put new thermal grease every couple of months (i also did it again after the problem started).
now for the specs: I'll just add that the only other thing changed is the fglrx drivers which i now use the 11.4 catalyst.
Code:
Summary Computer Processor2x AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ Memory4057MB (1662MB used) Operating SystemUbuntu 11.04 User Nameroy (roy) Date/TimeThu 05 May 2011 12:19:00 AM IDT Display Resolution1680x1050 pixels OpenGL RendererATI Radeon HD 3850 X11 VendorThe X.Org Foundation Multimedia Audio AdapterHDA-Intel - HDA ATI SB Audio AdapterHDA-Intel - HDA ATI HDMI
[Code].....
I click on top left then shut down button and then shut down. After that a screen appear saying a lot of technical things. In last line it is written [some mathematical code]system halt after that i need to press CPU button to close computer. Is this correct process of closing xubuntu 11.04. I am asking this because it is not required to press CPU button in any windows version(xp/vista/7).
View 4 Replies View RelatedI got a strange problem that only happens if the computer isn't used for some hours. XUbuntu seems to run out of memory and killing all processes in a row, when I come back no keys have an effect and the screen displays something like this: However, this doesn't happen, when the computer is used for the same time, so I couldn't watch it happen.
View 2 Replies View RelatedI have Ubuntu 11.04 on a laptop. I want to try out Xubuntu, but when I try and download it in synaptic, it says that it would have to get rid of Ubuntu desktop.
Is that a bug, or did I do something to make it like that? And is it possible get xubuntu desktop without removing ubuntu desktop?
I've been getting it up and running with Xubuntu. Xubuntu 9.10 just won't install--the screen goes blank and the computer locks up, with either the regular or the alternate install CD. I gather that this isn't an unknown issue in 9.10, so I'm installing 9.04 instead and I'll just wait until 10.04 comes out. Xubuntu 9.04 installs and runs like a charm.This is an HP Pavilion ze4125, with 768MB of RAM and an ATI Radeon IGP 320M video card. When I enter "sudo su -c "lspci | grep VGA", it returns "01:05.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility U1".
So what I want to do now is install the best driver I can so I can make the most of the video card. XP let me use any number of high resolutions, but the Display icon in Xubuntu tops out at 1024x768. EnvyNG doesn't offer. anything compatible with my video card. I've tried installing ati-driver-installer-9-3-x86.x86_64 and ati-driver-installer-9-12-x86.x86_64, but both say "Extraction failed" (I was running them with gdm stopped).So, is there something specific I should be doing to get access to higher resolutions, or a driver I need to install? This is easy on my main computer, which has an NVidia card, so I can use the NVIDIA X Server Settings utility to adjust the resolution--but obviously this machine doesn't have an NVidia card.
Xubuntu or Kubuntu?
I have Kubuntu installed on a new laptop but it doesn't seem very "fast." Would Xubuntu perform better?
Wondering where the option is to connect to NFS in Xubuntu? My FreeNAS server is lonely
View 2 Replies View RelatedI just installed Xubuntu on my old iMac G3 and I booted it and when I try to log in it says "Authentication Failure" I'm 99.9% positive I'm using the right username/psswrd, does anybody know how to change it or over ride the login part all together?
View 2 Replies View Related