Ubuntu :: Why The Output Files (trace File E.g. Out.tr) Are Not Same For The Same Tcl Script
May 27, 2011
when I run a tcl script using ns-2.30 and get a result and run the sam script in ns-2.29 and get an error and run the script file in ns-2.33 and get a result but the output filr (out.tr) is less in size than the output file of ns-2.30 i and also in the details of time scale , for example one out.tr file contains 19000 line (2 M byte size) and the other out.tr file for the same tcl file using the ns-2.33 version contains 10000 lines (1. M byte size) . Does that make since ? also in result file nam file for ns-2.30 it has some drops but the ns-2.33 has no drops! when I run the name !!!. is the time scale for simulation tunable or can be aligned?
View 1 Replies
ADVERTISEMENT
Sep 19, 2010
I have be unable to access my bt homehub from another (external) ip address recently. I didtrace route to see what is happening to the connection and got the following.
It bounces around as it gets out my offices network and then seems to get to BT's servers and then I get stars. what that means?
1 - 8 bouncing round office network:
9 linx3.ukcore.bt.net (195.66.224.11) 19.405 ms 19.424 ms 19.381 ms
10 core2-pos0-1-5-0.ilford.ukcore.bt.net (62.6.201.121) 20.774 ms 21.099 ms 19.986 ms
[Code].....
View 4 Replies
View Related
Oct 19, 2010
i am investigating on solutions to trace a file deletion on a computer( Linux O/S).i also need to determine weither after a file deletion or download on a computer, the computer clock had not been modified. In case a file has been downloaded on a computer and then transferred to a removable device, i need to find out the file activity. i mean i should be able to tell that the file was downloaded and transferred to a device with possible specifications.
View 2 Replies
View Related
Dec 5, 2014
The usual answer is debian's ldd(1) and I found broken things due to past lib abuses I previously hadn't understood I'd did - or rather hadn't realized because by looking it "looked ok and worked" - but i had problems. many i fixed.
After I ran a new script: it showed some i'd STILL missed after carefully re-doing /lib by hand (and using /var/lib/dpkg/info/libs.list)
I just made something that might be nice. seems to be the only thing that does it. but its' small and quick and has (tty/stdout) output still.
the had part isn't finding info, objdump(1) does that wonderfully : it's using it..
View 4 Replies
View Related
Jan 3, 2011
i have 10 vi files . these files contain some system related information. i need to combine the output of all these files into a single file. the final file should contain contents of all these 10 files and the output should be in a tabular format.
is there any command in vi that i can use to create a table ?
View 9 Replies
View Related
Sep 9, 2010
file1: have DNA sequences and each sequence will begin with > symbolfile2: have protein sequence and each sequence will start with > symbolfile3: BLAST result of file2 and each result will start with query= .my problem is i have to make a report file by combining these three in such way that first sequence from file1,first sequence from 2nd file and first result from file3 should be printed in a report file
View 14 Replies
View Related
Feb 14, 2010
Does Linux have a way to trace writes to a file?
For each write, I would like to know the time, date, process id, user, file position, byte count, and the data written.
I could use this with a script to replay the writes to a backup of the original file, and reproduce the file contents as they were at a point in time.
View 4 Replies
View Related
Jun 10, 2011
This is a trace-all the files so that you can imagine my trace file format.
Code:
+ 0.1 1 0 cbr 164 ------- 1 1.0 0.0 0 0
- 0.1 1 0 cbr 164 ------- 1 1.0 0.0 0 0
r 0.111312 1 0 cbr 164 ------- 1 1.0 0.0 0 0
[code]....
View 10 Replies
View Related
Dec 7, 2010
I'm working on some scheduled task script files to keep nightly backups of some of our database information in place, and it's a bit annoying when they blow up. I know how to redirect stdout and stderr to a flat file I can view when I come in, and I know that 2>&1 maps them both to the same file (whatever was named in 1). However, I'm running into some cron-time situations where it's easier to have the two streams together, and other cron-time situations where it's easier to have them separated. I can't really tell which is going to happen; is there some way I could create both kinds of output file for my scripts, so that I've got a std_err only file and an interleaved std_out/std_err file?
Note: I've looked at the 'tee' command, but I don't think it will work for what I'm after. 'tee' appears to only work with stdout; I'm trying to work with stderr.
View 5 Replies
View Related
Jul 28, 2010
Alright, I have a network trace file that I want to parse through.
The file looks like this:
+ 1.002 /NodeList/1/DeviceList/0/$ns3::PointToPointNetDevice/TxQueue/Enqueue ns3::PppHeader (Point-to-Point Protocol: IP (0x0021)) ns3::Ipv4Header (tos 0x0 ttl 62 id 0 protocol 6 offset 0 flags [none] length: 40 10.2.1.1 > 10.1.1.1) ns3::TcpHeader (49153 > 26 [ SYN ] Seq=0 Ack=0 Win=65535)
- 1.002 /NodeList/1/DeviceList/0/$ns3::PointToPointNetDevice/TxQueue/Dequeue ns3::PppHeader (Point-to-Point Protocol: IP (0x0021)) ns3::Ipv4Header (tos 0x0 ttl 62 id 0 protocol 6 offset 0 flags [none] length: 40 10.2.1.1 > 10.1.1.1) ns3::TcpHeader (49153 > 26 [ SYN ] Seq=0 Ack=0 Win=65535)
[Code]....
View 2 Replies
View Related
Sep 10, 2010
I want to create VBR traffic,I created file which contain two 32 bit fields.But When I execute tcl program with this.No pkt transfer is shown.When same program I tried with example-trace ,i saw pkt transfer.Containt of my traffic trace file is as follows :
[Code]...
View 4 Replies
View Related
Mar 22, 2011
how do i plot the trace file into a graph? can any 1 show an example here? just any trace file will do
View 13 Replies
View Related
May 1, 2011
How to plot graphs for trace files generated in ns2 using xgraph and gnuplot.
View 7 Replies
View Related
May 11, 2011
I need to trace the actions that are performed by my .cshrc file. Is there a command i can use to get a printout of this?
View 3 Replies
View Related
Oct 31, 2010
I am working on a script that allows me to convert an IP address to a country name. I have 2 files. One that has text like: PORT.80 TCP SRC=x.x.x.x and the other is x.x.x.x United States. How can I combine these files so that the file output is PORT.80 TCP SRC=x.x.x.x United States?
View 5 Replies
View Related
May 7, 2009
Until now i haven't had to dabble with bash scripts.
I have a program that reads in data files. These are named datafile01_R, datafile01_G, datafile01_B, they then increment, so datafile02_R etc i have about 600 of these. the program reads in 3 data sets at a time from each run, so files_01 r, g, and b.
The program then does its magic, and outputs about 40 different files, depending on the file, they gone to folders named R, G, B, psa, or tracking.
The program itself has configuration files to say where the files should gone when analyzed, there is also the config files that reads in the data sets.
At the moment i have to run one set of data, then go in and manually change the input file location, and run again. But, doing this, even though a different data set, the new set overwrites the old set in one of the output folders. So i need a way to increment the output filenames after they are written and before the program is run again with the new data set.
View 1 Replies
View Related
Apr 22, 2011
I am curious if perhaps I am doing something wrong extracting pages from a pdf doc using pdftk and creating a new file. I am only extracting the odd pages from the file and outputting them to a new file that is now only 20 pages instead of the input's 40 pages, yet the new output file is still 1.4Mb in size, the same as the original.
It seems strange to extract only half the pages of a large document and end up with a result that is the same size. how to streamline the resulting pdf's using pdftk?
BTW this is the command I am using, in case perhaps I am missing an option to optimize file size or something:
Code:
pdftk A=ch15.pdf cat A1-40odd output odd.pdf
View 1 Replies
View Related
Jun 3, 2010
When I try to copy PDF files from one folder to another folder, it give me this error: "Error while copying "2004-SNUG-Europe-paper_...log_DPI_with_SystemC.pdf". There was an error copying the file into /media/CCDCE66BDCE64F70/Backup Master/Heterogeneous_cosimulation/Documentation" "Error splicing file: Input/output error" What is the reason of this error and how can this be fixed?
View 9 Replies
View Related
Jun 29, 2010
I have a 7.2 GB file (VMWare virtual machine file) that I am trying to copy from its original location to the another folder OR to external hard drive...each time I try to do this, I always get the following error after the copying process reach 'exactly' 1.4 GB
Error reading from file input/output error
And I have to either Cancel or Skip
I've tried to split the files to smaller pieces but the idea didn't work as I still get the same error whenever I try to compress/ split or do any operation with this file. how I can copy this file?
View 2 Replies
View Related
May 1, 2011
My script.
This is may script:
Code:
Problem: Output file doest not exclude the values in grep -av
View 3 Replies
View Related
Jul 24, 2010
I am new to shell scripting.What i am trying is to write a shell script which take the input file and output should like as mentioned below.Output file should have data till SOK (marked in red)from every second line and then the selected data(marked in green) from 4th line.So selected data from 2nd and 4th line in one line of O/P file and then similarly selected data from 6th and 8th line in second line of O/P file.Input File:
3c3
< c1111;11.11.11.11;pOK;SOK:abcde;Universe:aa
---
[code]...
View 14 Replies
View Related
Feb 5, 2010
I am using below script to ftp a file to remote machine
Code:
#!/bin/bash
ftp -nv <<EOF
open ${SERVER}
[code]....
When I execute the above file its working fine and displaying output on to the screen. How can I log the output to a file?
View 7 Replies
View Related
Feb 28, 2011
My employer issues pdf files with everyones work schedules. I copy the content and save it as plain text in a file called unformatted (hope to be able to automate this step someday). Im working on a SED script that reduces unformatted to only display what I want to see and saves the result in a file Iïve named formatted. After that I have to manually copy formatted and save it with that days date as a filename e.g. 2011-02-25 or whatever day is scheduled in the pdf, for use on a mobile device (Nokia N900). I noticed that the date occurs on certain lines in the file so I added a line like:
sed -n 's/^Date: (201[1-9])/([0-1][0-9])/([0-3][0-9]).*/1-2-3/p' < unformatted >theDate
That creates a file theDate with the date in it that I wish to use as the filename for this particular instance. So I would like to skip the file formatted all together and have the sed- script write to a new file using the content of the Date as a filename, but how do I make that happen? And of course it would be more elegant if I could skip the intermediate theDate file as well.
View 4 Replies
View Related
Aug 3, 2010
having following problem in linux environment.I have a following basic file with name " BASEFILE", as shown example below :
sl.no pol.no name status loan
1 123 rama FORCE 500
2 234 jama LAPSE 800
[code]...
View 12 Replies
View Related
Feb 25, 2010
I would like to search for a term within a batch of text files and copy the files containing that term to a folder.
I've read the man pages for Grep, Ack-grep and looked through nautilus, dolphin, midnight commander as well as tried beagle, tracker and google desktop (and looked throught these forums).
I can do this function easily with xp's wagging dog in the Windows search, but would like to find a way in Linux.
View 5 Replies
View Related
Feb 6, 2011
im trying to output a list of running processes via a shell script. At the moment i got this which outputs the processes to a text file called out.
echo $(ps aux) >>out
The problem is though, the processes are all just one big block of text which makes it hard to read. Does anyone know how to sort the output to a text file so that it prints to the text file at 1 process per line? I know its probably simple but im very new to linux.
View 5 Replies
View Related
Jan 23, 2010
At the time of INSTALLATION im getting errors about not able open Input/output files... and some other errors... im using SATA 80GB HDD... i have already installed XP....
the sad thing is two months back i installed UBUNTU ..and i have worked on it...
but unfortunately i formatted my entire system and now i got this problem...
View 2 Replies
View Related
Nov 6, 2010
I am using curl as the following
Code:
curl "http://site.com/pages/{1,2,3,4,5}.html" > /home/myuser/allpages.html
i need to save each page in a separate page by the way i have tried this command
Code:
curl "http://site.com/pages/{1,2,3,4,5}.html" > /home/myuser/{1,2,3,4,5}.html
but it displays error
Code:
ambiguous redirect
is there any way to do that
View 5 Replies
View Related
Jan 25, 2011
I have used Thoggen; however, there is no way to break the output in to multiple files. I encoded at 1000MB, but now I want to break the file into 40MB chunks. Is there an app that can do this? Does ffmpeg support these feature?
View 1 Replies
View Related
Jul 31, 2010
whenever I copy (or move) files from one place on my hd to another One or two of them dont copy, and I get an error similar to " There was an error copying the file into [location]. Show more details> Error splicing file: Input/output error. The file is always an .avi file and always between 600MB and 1.4GB in size, how can I fix this problem?
View 9 Replies
View Related
