I want to create VBR traffic,I created file which contain two 32 bit fields.But When I execute tcl program with this.No pkt transfer is shown.When same program I tried with example-trace ,i saw pkt transfer.Containt of my traffic trace file is as follows :
[Code]...
OS : CentOS 5.3 64bit How to trace incoming and outgoing network traffic for a give user? User 'A' logs in to the system and does various network connectivity As root user need to find what are the outgoing and incoming connection that are related with user 'A'. basically need to check the connection flow. netstat will show ESTABLISHED, LISTEN etc.. need something like tcpdump
Eg:- --user option for tcpdump tcpdump -vv -nn -i eth0 host 10.200.2.1 and tcp dst port 8080 --user A Can someone tell me any tool which can do such thing? Even if it can show the process ID of the client application which is trying to establish network connectivity will do.
Alright, I have a network trace file that I want to parse through.
The file looks like this:
+ 1.002 /NodeList/1/DeviceList/0/$ns3::PointToPointNetDevice/TxQueue/Enqueue ns3::PppHeader (Point-to-Point Protocol: IP (0x0021)) ns3::Ipv4Header (tos 0x0 ttl 62 id 0 protocol 6 offset 0 flags [none] length: 40 10.2.1.1 > 10.1.1.1) ns3::TcpHeader (49153 > 26 [ SYN ] Seq=0 Ack=0 Win=65535)
- 1.002 /NodeList/1/DeviceList/0/$ns3::PointToPointNetDevice/TxQueue/Dequeue ns3::PppHeader (Point-to-Point Protocol: IP (0x0021)) ns3::Ipv4Header (tos 0x0 ttl 62 id 0 protocol 6 offset 0 flags [none] length: 40 10.2.1.1 > 10.1.1.1) ns3::TcpHeader (49153 > 26 [ SYN ] Seq=0 Ack=0 Win=65535)
[Code]....
i am investigating on solutions to trace a file deletion on a computer( Linux O/S).i also need to determine weither after a file deletion or download on a computer, the computer clock had not been modified. In case a file has been downloaded on a computer and then transferred to a removable device, i need to find out the file activity. i mean i should be able to tell that the file was downloaded and transferred to a device with possible specifications.
View 2 Replies View RelatedI need to set up my centOS computer as a firewall in my home network. Ive got 2 interfaces, eth0 and eth1. I want to allow and forward all traffic on eth0 and block all traffic on eth1 except ssh, ping(icmp) and DNS. How do I do this? Ive tried some editing in /etc/sysconfig/iptables but no luck.
View 1 Replies View RelatedI wanted to tell my server to block all traffic but US only traffic. So i followed this guide:[URL].. Now I know, it's the best way to help prevent hackers/crackers (doesn't matter to me what they are called. I just have to stop them). My server only deals with US clients anyways so might as well just start right there for my server's security before getting into the brute force and injection preventions. So I got it all done compiled everything moved to the proper directory. I then started to setup my iptables. Like so
Code: iptables -F INPUT
iptables -F OUTPUT
iptables -I INPUT 1 -s *.*.*.* -p tcp --dport 22 -j ACCEPT
iptables -I INPUT 2 -s *.*.*.* -p tcp -j ACCEPT
[Code]...
After seeing that i went digging in the code and figured it was something todo with memory allocation.
Does Linux have a way to trace writes to a file?
For each write, I would like to know the time, date, process id, user, file position, byte count, and the data written.
I could use this with a script to replay the writes to a backup of the original file, and reproduce the file contents as they were at a point in time.
This is a trace-all the files so that you can imagine my trace file format.
Code:
+ 0.1 1 0 cbr 164 ------- 1 1.0 0.0 0 0
- 0.1 1 0 cbr 164 ------- 1 1.0 0.0 0 0
r 0.111312 1 0 cbr 164 ------- 1 1.0 0.0 0 0
[code]....
Recently I notice that when I'm connected to an vpn server (pptpd) and I'm using it as a default gateway my download and upload speed decreases almost to the half of the usual speed. I made a test using iptables in order to count how much GRE packets are generated (except the real traffic itself) in that way:
Code:
iptables -I INPUT -p gre -j ACCEPT
iptables -I OUTPUT -p gre -j ACCEPT
iptables -I FORWARD -s 172.16.10.101 -j ACCEPT
iptables -I FORWARD -d 172.16.10.101 -j ACCEPT
The first 2 rules match all GRE packets between the pptpd server and client, and the next rules - the traffic between the server and the client.
When I turn the counters to zero and begin to generate traffic (to browse, to download etc.) I see that the GRE packets are even more than these in the FORWARD chain.
So, my question is first of all is my test correct and is it true that so much gre traffic is being generated during the browsing (it becames clear that the traffic is double than if the pptpd wasn't used as a gateway) and if yes - can that traffic be reduced?
how do i plot the trace file into a graph? can any 1 show an example here? just any trace file will do
View 13 Replies View RelatedHow to plot graphs for trace files generated in ns2 using xgraph and gnuplot.
View 7 Replies View RelatedI need to trace the actions that are performed by my .cshrc file. Is there a command i can use to get a printout of this?
View 3 Replies View Relatedwhen I run a tcl script using ns-2.30 and get a result and run the sam script in ns-2.29 and get an error and run the script file in ns-2.33 and get a result but the output filr (out.tr) is less in size than the output file of ns-2.30 i and also in the details of time scale , for example one out.tr file contains 19000 line (2 M byte size) and the other out.tr file for the same tcl file using the ns-2.33 version contains 10000 lines (1. M byte size) . Does that make since ? also in result file nam file for ns-2.30 it has some drops but the ns-2.33 has no drops! when I run the name !!!. is the time scale for simulation tunable or can be aligned?
View 1 Replies View RelatedHow to trace the energy information from the trace file. also how to change the energy drain in faster manner.
View 2 Replies View RelatedFor some reason my DNS servers aren't able to resolve certain names. Most names resolve fine there are just a few that don't work. Nslookup doesn't work either of course, and curiously neither does "whois".
Here's an example:
Quote:
dig facebookmail.com +trace
; <<>> DiG 9.2.4 <<>> facebookmail.com +trace
;; global options: printcmd
[code]...
I've got a few systems which forward ports to one another all over the place, and somewhere along the line a port forward fails. I want to trace the route of a connection on a specific port to see where the connection hits a wall, to see what system is causing the problem. I've tried `tracetoure -T -p <port>` but it doesn't output anything about the ports it hits, stops when it hits the address I supplied even though it is forwarded elsewhere, and there doesn't seem to be a verbose mode. interstingly, if I specify a different source port via the '-s' option, the trace keeps hopping to * * * * and never get anywhere (at least to 27 hops then I CTRL+C)
View 6 Replies View RelatedI've troubles getting my new Sweex wireless 300N USB adapter to work. Tried searching in several directions (see closed thread). Further investigations shows however it is caused by the NDISGTK wrapper for Windows drivers. Can anyone tell me whether Sweex is shipping a faulty driver (it is the latest available) or it is a fault in ndisgtk? Or maybe I'm doing something stupid myself, which I do not find completely imagenary below some more detailed information on my findings: Started with network off and examined the networkstatus
Quote:
tpeelen@CC-desktop:~$ sudo lshw -C network
*-network DISABLED
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
[code]....
We have something on our network that is reaking havoc with our content filter. I am trying to track it down, but so far I have been unsuccessful. We have approximately 500 devices in 100+ different locations spread across 9 states. Looking at each computer is not really feasible.
I need a machine that can sit in between our network and our internet connection and graphically monitor in real time and logs how much traffic each device is sending and receiving. It would need to sit inline so it has to have two nics and be able to pass traffic. The machine also needs to be transparent. Reconfiguration of our routers or workstations is not an option.
I have used ethereal and wireshark before. Ethereal may be a viable option, but wireshark seems to provide lots of information, but no practical way to make use of it. how to set up the box to be a transparent device on the network that will allow internet bound traffic to flow (freely)?
How to analyse the IT and Traffic file generated in CRCN simulation? What they represent i.e what is the format?
View 7 Replies View RelatedI've succesfullly connected to my vpn with kvpnc, but none of my traffic is going through the vpn! I dont know how to route traffic to the vpn. for instance, when I go to whatsmyip.com it still has my previous ip.
View 1 Replies View RelatedI have a comcast business network adapter that has a 4 port switch. It also handles nat 1 to 1 translation for static IPs (That's just how they do it, there is no other choice).
In port 1, I have a cat6 that brings traffic to and from my linux machines, allows me to vpn, ssh, a mail server, etc. Everything here is fine.
In port 2, I have a netgear router that is setup with a point to point VPN for a client.
Here are the issues:
1. Machines that are connected to the netgear vpn router/switch can access machines on my network - I don't want this.
2. I can't access the machines connected to his lan from my lan - I need this to administer his machines somehow. Even if I have to VPN to the concentrator and do it like that.
Here is the network structure.
Code:
Internet <-> 10.10.10.1 -> switch with 10.10.10.x machines
|
-> internal vpn IP 10.10.10.50
|
[Code]....
The external network for the VPN is 10.10.10.x and the internal is 10.10.20.x. So, a machine with IP 10.10.20.100 can get to 10.10.10.X and I don't want that. I guessing it's doing this because technically, I'm 'from the internet' on 10.10.10.x and the vpn machines are going 'out to the internet'. Is there a way to have this:
vpn -> gateway traffic only?
I have a cisco 1811w at my disposal if I need to use it; however, I'm all thumbs when it comes to cisco IOS and networking in general.
I'm trying to inspect network traffic from my iPhone / iPad / Kindle / other wi-fi only consumer electronic device. To do this I man-in-the-middle myself (connect laptop to LAN via wire, create wireless Ad-hoc network, bridge the connections, then connect my device to the ad-hoc wi-fi network) and use Wireshark to watch the traffic.
In the past this has been adequate for my needs (just wanted to watch and see what potentially private info was being leaked about me / see that banking / amazon / etc apps were going over SSL). Now I've noticed that applications are almost all using SSL (which is great) but they are way to active for my taste. I'd like to use these apps but want to know what's happening in the background. I know that corporations dead-end SSL connections at their proxys to inspect the traffic and then re-establish the connection on behalf of the user for the trip across the internet. While I find the corporate use a bit distasteful, I think this is exactly what I'd need to do to myself. Any suggestions for how to do so or other ideas on how to get the packets in the clear?
How are packets treated that do not match any of the filters?
View 4 Replies View RelatedI want to simulate video traffic in ns2.31 .I have added mpeg4_traffic patch in Contributed codes in NS2 web site . I receive segmentation fault error ,when I debug code I got a lot of error ,I don't know what to do ? does no one know how should transmit video in ns2 ??
View 14 Replies View RelatedI have ubuntu server with PPTP on it. I need to limit single connection speed for ip 1 mbit/s, and mounthly traffic limit to 5 GB. How i can do this my task. I try to find somthing with ip tables, but can't find how to creat mounthly limits.PPTP do not have this option, maybe is some other, not hard for configure VPN server? Maybe someone make this task with iptables, and can give commands for limiting? Ofcorse VPN program with integrated accaunts and limits will be better.
View 1 Replies View RelatedI've got 4 or 5 of these TRENDnet USB network adapters ( TU-ET100c ) that I use frequently when I'm configuring firewalls or IPS devices for customers. I use them in combination with VirtualBox to test. They've always worked great until my new laptop I just got, and I put 10.04 on it. Previously I was on 9.x. Sometimes they will give a link light, other times not. And when they do the interface shows that it's up, but I can't get any traffic across the interface.
[code]...
I have access to a VPN I use when having confidential instant messaging sessions. For the purposes of my work, essentially.I'm a command line kind of guy, and like to use Finch (the shell version of Pidgin) for those.However, when I turn on my OpenVPN connection it routes all traffic through the VPN. Web-browsing, IMing, and I can no longer access other machines on my home network.Can I set OpenVPN to only route traffic I ask through that connection (either by port number or application, or some way I haven't thought of), while other traffic flows through my usual home network?Some kind of local proxy perhaps? Or a dd-wrt box set up as a proxy, connected to OpenVPN?I've played around with the GUI environment too (I have a basic GUI I sometimes use on my main machine) and have installed the full desktop 10.10 on a second machine just to see if I can work it out.
View 2 Replies View RelatedI have a VPN account and have been running it perfectly on windows without any problems but I deleted my windows OS because I wanted to force myself to learn a Linux OS. I have installed the configuration package through the terminal and have followed this guide exactly
[URL]
The VPN was giving me a no secrets error to start off but I managed to fix and now it connects for about 40seconds but whilst it is connected, the internet is completely useless and I can't get on anything... It then disconnects after 40 seconds saying it has failed.
I installed firestarter to see if I could tweak it there to work but it was beyond me and I could also see from the data being sent that none of it was going through tap0 whilst the VPN was connected..
I have done some research on the net and I am battling to find effective methods in other to bypass those irritating ISP traffic shapers. I have used SSH tunneling to reduce latency (which is my primary goal, i dont care about silly torrents, etc) by about 200ms.
Do you know of any other way that I could improve this latency? When I ping my server in Germany (from South Africa) i get a latency of about 185ms... I was hoping to get online gaming traffic to around about 250ms or even less if possible... Right now its sitting on 550ms WITH SSH tunneling and 800ms without it... (to Blizzard servers)
is it possible to see the router traffic using a remote system? can those packet headers b modified for marking purpose?
View 5 Replies View Related