I have Tango Studio installed on a usb stick which i wish to install alongside my current Maverick install. I booted up into it but when i click on the "install tango studio" icon i get asked for a password. I have searched google and i have not been able to find anything about this. It doesn't appear anywhere on their website and before someone says to ask on their forums i can't as their forums are not in english. I used start up disk creator to make the usb install but couldn't boot into it at first. I did some searching and found out that creating a usb install in maverick isn't backwards compatible. There was a simple solution which got me into the live mode, pressing tab, typing in live and then enter. I wonder if this is the reason why i am being asked for the password when i get into the live desktop? I have never had to put in a password before. I have tried a few generic passwords but no joy so i don't know what to do. Is there a default password that Ubuntu uses that would work for me so i could finally get it installed?
accidently deleated ubuntu lucid default theme,and lost the default user logon,it's now flat and gray.how to get it back?i still have the background, not the user logon
in maverick the default package installer (when I double click on a .deb) is Ubuntu Software Centre, how can I make the default package installer from lucid (was it called "dpkg"?) the default again? Ubuntu Software Centre is too slow and freezes every time I click on something, can it be replaced?
I want to give my users option of logging to the system. They should have posibillity for choosing option betweend logging to the system with their default password or one-time password OTPW. I installed OTPW in my Debian. Here is my /etc/pam.d/sshd file:
I have Lucid. I played with compiz and emerald. I put everything back. But my theme is no longer as it was before I started. Similar, but the icon set and windows are a little different. Under 'appearance' the theme, which I'm told is called 'light' isn't visible. And I don't know the original icon set. How can I restore my desktop to look as it did on installation.
I would like to set xine as my default player for DVD playback and cannot figure out how. I have read other posts that state to right click on file>properties>open with but do not seem to have the open with option when right clicking a dvd that is in my dvd drive. I would also like to change the open with option in the right click menu. The current option is to open with movie player, and movie player cannot seem to find additional plug ins to open file with.
I can't change the default session on the login screen to Openbox. The only place I can see to change this in 10.04 is in the "login" settings screen. I've done that; I still get "gnome" as the default option when I go to log in.
I have deleted notification area from the top panel and now I need few items from there, like volume mixer. It is a way to restore top panel at the default status in Lucid Lynx?I've tried wit add to panel but i didn't succeed to get what i want.
I get 3-4 clicks every minute, until I realized the problem and installed "laptop-mode-tools". After that things are back to normal.Why isn't laptop-mode installed by default in Lucid? This is a simple work-around which should be imposed by default, so users' hard discs won't be damaged.
I accidentally deleted my /etc/fonts/font-config file and now my fonts are all terribly out of whack in several applications including Synaptic, Chromium, Firefox, etc. How do I reset my fonts back to the Lucid Lynx default?
how you change the default version of python in Lucid. Lucid comes packaged with 2.6 but we use 2.5 where I work. I didn't see much of anything on the web for this topic so figured I'd post something. If you are installing python2.5 on Lucid version 10.04 (comes package with 2.6 only)
I do like a lot of the changes they've made in Lucid (especially the aesthetic ones), but there is one change they made that I don't like, and I can't figure out how to get around it. I have Ubuntu set so that, after 10 minutes or so of inactivity, my screen is blanked, in order to save power. In Lucid, though, whenever I come back to my computer after the screen has been blanked, it requires me to entire my password in order to resume use of my computer. Is there any way I can turn this off?
This next question is unrelated, but I do still feel the need to ask. Why, exactly, did they move the minimize/maximize/close buttons from the top-right corner of the window to the top-left? I know that it probably feels natural to Mac users, but every previous version of Ubuntu has had these buttons in the top-right corner.....why on earth did they feel the need to change it? I've been using Ubuntu for a while now, and it's kind of annoying. Surely most people who've been using Ubuntu for a while were thrown off by this, as well? I doubt that there is any way to change it, but does anyone know if there is?
In Ubuntu Lucid 10.04, when I click a disk in the left panel of Nautilus for the first time, the disks are getting mounted without asking a root password. This was not in the case for the previous versions of Ubuntu. how can I turn this feature on in Lucid.
I don't need password protection, I don't have it on Windows 7 for any acct, and also don't want it on linux.However, as a non-tech person, I couldn't eliminate this requirement.I tried inputting an easy password to minimize inconvenience but was warned it was either "too short" or "too simple".
But I couldn't find a modified version of it for Swiftfox anywhere, so I decided to modify it myself. But I'm not 100% sure that I did it correctly, so I thought I'd ask here.
Also, will Swiftfox 3.6.4 be able to use this same profile? I thought it might not because of the new "Out of process plugins" feature being added.
after upgrading to lucid lynx ubuntu doesn't boot with the new kernels 2.6.32-22-generic and 2.6.32-23-generic (also in recovery mode). But it's does boot with the previous 2.6.31-21-generic kernel. At the time i was hoping to wait it out, but a new kernel has come and the problem persisted. I've been trying to find a solution for this but somehow, amid lots of failed boot blank black screen threads, i didn't relate to any solution. The boot seems to go well until a pixelated logo appears (before the login screen), then goes to a blank black screen and there it stays stuck with no remedy. Looking into dmesg logs - albeit some differences between 2.6.31-21 and the newer 2.6.32-23 - the failed boot seems proper in both logs. In Xorg logs the differences are bigger but i cannot pinpoint a source for this problem.
Numerous packagesare asking for my default keyring password. The only password I have ever created on this newly installed netbook remix 9.1 is my user password. That is not accepted by the default keyring. I have tried to change the default keyring password using my administrator user name password.What is the default keyring password? How can I change it, or use it if I have never known it or created it?
I just installed postgresql 8.4 package on my Ubuntu 10.10 desktop. Seems to have worked fine. But what is the password for logging into the databases created by user 'postgres'?
sudo su postgres and then createdb or psql mydb
fine and it never asks me for a password. But if I want to use pgadmin3, I want to enter passwd for postgres, etc.
I have Lucid working nicely now, and I've started using Gwibber, which seems to try to connect at login. The only problem is that I'm immediately asked for the login keyring password (which happens to be the same exact password I just entered to log into the machine). This happens every time I boot the machine.
Is there any way to make it stop asking me for this login keyring password? I just don't get why I have to enter the same password twice.
The message is:
Code: The login keyring did not get unlocked when you logged into your computer.
I was just wondering, is there a reason why when mounting a Windows partition I am no longer prompted for a password? I kinda liked this behaviour because it helped me lower the risk of doing stupid stuff to the windows partition.
I upgraded from Karmic to Lucid recently. Before upgrading, I had customized my desktop on Karmic with Compiz, Emerald and new set of fonts. After upgrade (which appears to have gone smoothly, yay!), my desktop retained the previous appearance settings. I want to try the factory default gnome appearance settings for Lucid and still stuck with restoring fonts.
What I have done till now:
0. Enabled Visual Effects from Appearance menu. 1. Theme -> Changed to Human 2. Window Manager -> Still using Compiz 3. Window Decorator -> Switched from Emerald to GTK 4. Font -> Changed first 3 font types in the Font tab to Sans, size 10, 4th to Sans Bold and 5th to Monochrome. Rendering -> subpixel smoothing (LCD)
What I want:
1. Is this the default setting? Have I missed anything in restoring default settings?
2. I have done too many changes to firefox font rendering over time. How do I restore default 10.04 font settings for Firefox? I would ideally love to have an option in Ubuntu which would help me restore factory settings.
I'm trying to install Lubuntu 10.04 beta 3 on an old computer to see if i can bring new life into the system but when i run the Cd if i choose run live session or try install Lubuntu straight it automatically takes me to a login screen to enter username and password.
Does anyone know the default username and password for Lubuntu 10.04 beta 3 ? ? ?
I really need to install or try out Lubuntu but i dont know the username and password to try or install it
Worked with UNIX years ago, want to get back in.Just installed the 10.04 netbook remix on spare Asus eeePC 900 to muck about with and see what's what.Installation doesn't let me specify a root password, and none of the old chestnuts I remember from UNIX days work.
I just re-sized my windows partition on my laptop and installed 10.04.1. Brand new clean install. I set up my user account, gave it a password, and everything was fine until I tried to connect to my wireless. I typed in the security key for my wireless, and it asked for a password to unlock the default keyring. The problem is, I never set a password for the "default" keyring. I never changed my user password. I didn't auto-login, I entered my password. This was the first boot up of the machine after installing 10.04.1. I can't use Empathy, because the keyring cannot be unlocked. If I "cancel" it gives me an error saying the account details are wrong, but I log into my facebook, aim, and msn every day, so I know the passwords are correct.
I have read about other issues with the keyring and with the auto-login bug that is associated with it. I have also read up on the bug that occurs with that as well. I couldn't find anything about my specific situation, so I hope this isn't a re-post of an issue that has already dealt with, but I did look it up. If it helps, the laptop I am running is a HP Pavilion dv7-3065dx, and I have Ubuntu Desktop 10.04.1 x86 installed. Clean install and the only thing I have done was log in, connect to network, and try to set up Empathy. Both Empathy, and connecting to network, gave me the issues with the keyring. It appears that there is already a password for the default keyring, it is not blank, and my user login password does not work for it. I'm at a loss...
The download page says the CD should boot into the desktop. Instead I am getting a login screen. What is the default username and password? (I assume that after I log in I will have an option to actually install it on my hard disc ...)
When I installed Lucid I got temporary wifi connection. It disconnected for no reason. Then it was constantly trying to reconnect, telling me my password was wrong. Which wasn't wrong at all. So I installed Lucid again from scratch and now everything seems to work fine. The only thing I didn't do was install the 'restricted drivers'. This was only one driver for me which had to do with my modem. Wifi works perfectly now. I hope it stays that way .reinstall Lucid and DO NOT install the 'restricted drivers' for your modem
