Ubuntu :: What Site Will Have Unity PPA
Nov 11, 2010I am going to try out the unity ppa which comes out today-12th november-. What site will I be able to get it from?
View 5 Replies
ADVERTISEMENT
Ubuntu Servers :: Openvpn Site-to-Site : Impossibile To Ping Client On Subnet?
Jun 25, 2010I have to ubuntu machine (9.10 and 10.4) with a openvpn tunnel between them.This is the situation:
Code:
NetworkA 192.168.0.0/24
|
UbuntuA br0:192.168.0.3 (openvpn bridge between eth0 and tap0)[code].....
UbuntuA has one only interface etho and there are two openvpn instance: one bridge istance with br0 and another instance with tun0.
UbuntuA is not the gateway for networkA. UbuntuB is the gateway for NetworkB.I need to comunicate between pc on networkB e those on networkA.This is the "ping situation" (no pc tested has an active firewall):
ubuntuA vs ubuntuB: OK
ubuntuB vs ubuntuA: OK
pc on NetworkA vs ubuntuA and ubuntuB: OK[code].....
Networking :: Enabling Full Routing Site To Site With Openvpn Not Using Masquerading?
Jul 27, 2010I've been on a quest to enable full routing through my openvpn tunnel between my office and the colo. Masquerading will work, however it will throw off anything key based and makes a lot of things just more difficult and vague in general. Is there an easy way to do this via iptables? I tried using quagga hoping it would magically solve my problems, however it does not seem to do my routing for me . I just did a basic static route within zebra...
View 3 Replies View RelatedNetworking :: Site To Site Vpn Racoon With Cisco Asa 5505 Routing?
Mar 25, 2010I have three locations with a central office connected to two remote locations. At the central office I run on a cisco asa 5505 two site to site vpns. The remote end of the first site is a checkpoint firewall , and the remote end of the second site is racoon on debian. Both sites are up and working. However, where at the first site traffic goes both ways, at the second site it only works from the central office to the remote office.
For example, I can ssh from a host in the central office to a host in the first remote site (through checkpoint firewall,) then ssh back from that host at the remote office to any host in the central office. In contrast, after I ssh from a host in the central office to a host in the second remote office (through racoon), I cannot see the central office hosts (ping the ip address of a central office host, ssh, etc. all fail.) The vpn settings at the central office (the cisco asa 5505) are identical. So it seems to me that some routing magic is missing on the host running racoon at the second remote office. Where would such setting reside? racoon config files? iptables?
Security :: Site-to-site Ouija Board Connection?
Oct 3, 2010Maybe a site-to-site Ouija board connection.
View 5 Replies View RelatedUbuntu Servers :: Access Web Site When Site's Domain Name / User's Local Server's Domain Name Are Same
Feb 18, 2010In the office there is a local network with samba+openldap PDC. The local domain name is company.net. The company desided to create a corporate Website on a remote hosting and desided that the site's domain should be company.net which is same as local network's domain name. So now it is not possible to reach that corporate website from within the company's local network because, as I guess, bind9 which is installed on above menioned PDC looks for company.net on a local webserver. Is there a possibility to let people from this local network browse the remote site?
View 1 Replies View RelatedUbuntu :: Appearance - Disable The Unity Dock But Not Unity Feature Where Min / Max / Close Go Into The Command Bar?
Jul 17, 20111. I didn't like the icon theme and changed it to Ubuntu Mono Light. But is there a way to get the Min/Max/Close buttons to how they are in Radiance when maximized, or is that dependant on something else?
2. Is there a way to disable the Unity dock, but not the Unity feature where the Min/Max/Close go into the command bar?
Ubuntu :: Unity - Mythtv Or How To Hide Unity Launcher
May 8, 2011Just moved to Ubuntu 11.04 with unity and only have one problem...For most of my desktop needs I prefer to have the Unity Launcher up all the time (fullscreen apps don't cover it), and have set this option with ccsm.
However, when I watch mythtv, it is also under the launcher (and the top panel as well). How can I force mythtv to cover the launcher?
What I really need is a keyboard shortcut to hide the launcher, but the only shortcut is for "show launcher". (I guess the devs assumed everyone would want it hidden by default).
This, by the way is not my usual way for viewing mythtv. I have a projector attached to the desktop PC and it doesn't get a Unity Launcher by default (in Twinview), so no probs. However, occasionally I want to watch something on my computer screen, and that is when this issue arises.
Ubuntu Networking :: Using A VPN On One Site Only?
Sep 19, 2010how do i configure Open VPN to automatically use a certain VPN for ONLY firefox, ONLY on a particular site? I don't want it to be applied system wide and screw up my IM client and all the sites that i have remembered passwords with, only for a site or 2 where there are regional restrictions.
View 1 Replies View RelatedUbuntu :: You Are About To Login To This Site
Jun 17, 2011After the last update every time when I try to see my mails from gmail, with the use of any app like plasmoid-gmail or kmail notifier, appears a window with this title. "You are about to log in to the site "mail.google.com" with the username "********", but the website does not require authentication. This may be an attempt to trick you. Is "mail.google.com" the site you want to visit?"
View 9 Replies View RelatedUbuntu :: Can't Connect Sources Web Site
Jan 9, 2010Dose everyone has the remastersys2.0.13.deb.i can't connect the sources web site.
View 2 Replies View RelatedUbuntu :: Web Software From Repos Or Site?
Apr 21, 2010I produce a lot of work under Drupal, Wordpress and Moin. Previously I have always downloaded the software packages for these from the developers website and installed it manually. When I install it manually it is fairly easy to see where files and directories have been created and I just get on with the projects.I've just noticed that the above three packages are available in the repositories. Is it better to install from the repositories or manually with this kind of software?
The reason I ask is because a software package like Gimp just appears in my start menu so I naturally would download it from the repo. But if I download something like Wordpress I can see it is installed through synaptic but does it actually produce any new directories or files in somewhere like /var/www? I'm not sure how I would access the software once it is installed. The W3 Validator for instance, I downloaded in 8.10 but although it was showing installed there was no obvious way to access it.
Ubuntu :: Install JRE After Installing From Site?
Jun 23, 2010I downloaded Java from the site itself, and I got a 20mb file named jre-6u20-linux-i586.bin How do I install it?
View 6 Replies View RelatedUbuntu Servers :: Migrating A Site From One VPS To Another
Jul 19, 2010I'm migrating a site from one VPS to another, and I'm having trouble understanding what I need to do with DNS. I haven't even gotten to the nitty-gritty of it: I don't understand it at a very high level. My host sent me this email explaining what I need to do, and I don't even know what questions to ask.
Quote:
Your registrar has MyHost's nameservers listed for your domain name.
All DNS-related info for mysite.com and everything inside that zone is defined in your zone file which is currently on your VPS "myserver1" and is being rsynced to [our] servers.
I'm suggesting that if you don't want to spend any of your migration time setting up a DNS server then you may wish to just make the changes in that file, since that is the method that is currently working.
I've come up with two possible interpretations of this situation, and perhaps neither is correct.I need to set my new VPS to be its own nameserver, and have my registrar point mysite.com to my VPS. I need to set up a DNS server to somehow interact with MyHost's nameservers (something about a zone file). Do either/both of these sound plausible? I thought DNS made a server into a nameserver, is that not right?
Ubuntu :: Cannot Log In To Gmail And Banking Site?
Aug 2, 2010I have trouble logging in to some pages: gmail and www.alpha.gr. After entering username & password the browser is continuously loading but there is no network activity and the page won't load.I am running 64bit Lucid and have this problem with the latest versions Firefox, Chromium and Opera.There is no problem with Windows XP installed on the same machine. This is not the solution I want to follow however
View 6 Replies View RelatedUbuntu :: Site Javaranch Is Not Opening?
Aug 3, 2010It sounds quite strange though..I dont know why Javaranch.com is not opening on my system.I use 9.04 with 3.8.6 firefox...there is no particular error.the site takes too much time to get opened but it does not..and you end up closing the tab with frustration.never had such experience before;with any web-site
View 6 Replies View RelatedUbuntu :: Get Access To Other Site NO SUDO
Aug 13, 2010I've got my username on Ubuntu (I can't remember version number, but its 6 months old aprox)..
I'm the sole user (& admin)..
I have /home/myusername/ & can edit all files (without using sudo), but if I want to edit a file in another directory - i need to use Sudo..
I'm setting up a website /home/website/
(this is the same structure as the external website I'm going to edit, i want the directory structure to be the same..)
is there a way, I can allow FULL access to the /home/website/ directory - While logged in as /myusername/
(IE So I do not need sudo (or any 'admin' command), to edit the files )
Ubuntu :: Promote System On Site?
Oct 5, 2010Being a Linux only user i would like to promote/advertise Linux on my website.
View 1 Replies View RelatedUbuntu :: Can't Browse A Site / But Windows Can
Oct 27, 2010I tried browsing URL... from Ubuntu - no luck - all browsers fail saying it's some network problem or so,but when I launched windowsXP from VirtualBox from inside Ubuntu (Maverick x64) - no problem viewing this site.Anyone any idea what could be wrong?
View 9 Replies View RelatedUbuntu :: Recommendations For Ensuring Site Is Up?
Dec 23, 2010I have a site that is currently on an unreliable server. Yes, we're fixing that; suffice to say the situation isn't permanent. I would like to know how to set up a fail check on the site. There are plenty of services out there, but I've got a server that I can add scripts to in the crontab. What elements would you recommend I have in the script?
View 1 Replies View RelatedUbuntu :: Php Code Not Processed On New Site?
Jan 7, 2011I just got my new vps up and running. I now have one site hosted on the server using drupal. Apache,php, mysql are all set up and working fine. I tried to setup a second site and created another virtual host for it. All permissions are set the same, the two virtual hosts have all the same settings but the new site does not process my php. When I browse to the new site I get a blank page. By viewing the source I can see that the php code is coming in but it is not being processed.
Don't know enough to know what else to check.
Ubuntu :: Hosting Web Site From Home
Feb 25, 20111) should questions about websites be posted here or the therver platform forum?
2) I'm trying to host a website from an old computer I have. I'm running Ubuntu 10.04; I have installed the LAMP package. I've made it's ip address static on my router (linksys WRT160nv3). I can ssh into it from my desktop on the same home network.
I've been following this guide: URL... I'm trying to make the server public. I've set up DMZ on my router to forward to my server's local ip address.
So now, after going to whatsmyipaddress.com, I can log onto my server from my desktop, which is on my home network, but not anywhere else.I'm fairly sure that my ip address from my ISP is dynamic, but it hasn't changed in the last hour.Let me know if you need anymore details. I'm very new to all of this.
Ubuntu :: Host A Site Using Lampp?
May 4, 2011i have been trying to host a site with lampp in ubuntu and i am pretty lost and sick of all the error messages, maby somone could give me a step by step guide how to do it. or got a bether option ?
View 8 Replies View RelatedUbuntu Servers :: Apache 2.2 - My Site Cant Be Seen On Lan
Jul 29, 2011Im trying to just set up my web page so it can be seen on my local home Lan (then Ill try to get it on the internet). I can see the site it on my pc but other network users cant.
They can ping my computer but cant telnet to it on port 6060 (thats the one is set the server up on)
What's wrong with my configuration its mostly the default with a few changes that I hoped would make the site work.
My ip 192.168.1.10
Here is the sites-available default file
Quote:
Ubuntu Networking :: Internet Freezing On One Site?
Jan 12, 2010I am running Ubuntu 9.04 on a laptop (Wireless) and Vista (plugged into router) on a multimedia center. I can watch tv shows from 2 out of the 3 tv network sites that i like. CTV and Global tv stream ok on both systems. however CBC won't work unless the pc is directly plugged in without the router.
View 1 Replies View RelatedUbuntu Networking :: Can't Access / Ping A Site
Mar 23, 2010Trying to access 67.15.245.6 (its a forum site). I can't get to it from home for over a month now. I can't ping it, but I can ping obvious things like google. Tracert isn't working at all. Once it hits the lightspeed.frokca.sbcglobal.net hop it just dies like ATT isn't allowing traceroutes. I've been using Tor as a work around. About 3 months ago I basically had the same issue with openbittorrent.com's site.
I have a linux server and windows XP box. I can't ping the above IP nor tracepath/traceroute to the IP from my linux box.
I have ATT uverse.
EDIT: The site is hometheaterlounge.com (The IP won't do you much and its just the IP of the site host).
Ubuntu :: Using Domain To Host Second Site Separate From First
Mar 24, 2010I have a Ubuntu Server that is correctly set up and has been working for awhile. It currently has a domain (Registered by GoDaddy) and it is used as the main. I just bought another domain (From GoDaddy) and I want it to connect to the same server but a different section to host a second site completely separate from the first.
So this is how I want it to be setup:
Domain1 = /var/www/
Domain2 = /var/www/website2
When I put Domain1 in the url like www.domain1.com it will connect to /var/www/
When I put Domain2 in the url like www.domain2.com it will connect to /var/www/website2
Ubuntu Security :: How To Block Subdomain Of Any Site
Mar 26, 2010My question is how to block a subdomain of a site. To make it as clear as possible, I'll give an example. I am regularly entering this arbitrary site [URL] which redirects me to this page [URL] and this index.html takes an image from a subdomain which is a subfolder of itself, that is: [URL]. What I am asking is blocking the images to be taken, but not the main page itself, i.e. to block www.somesite.abc/images/ without blocking the overall www.somesite.abc.
My idea was to use the /etc/hosts file by redirecting to loopback address:
Code:
127.0.0.1 www.somesite.abc/images
But it looks as if it doesn't affect things at all. Should I use it another way? Modifying /etc/hosts.deny maybe useful?
Ubuntu :: Vhost - Only Shows One Site Correct?
Apr 15, 2010I got my VPS last day and i deside to setup everything myself, but i just came to virtualhost in apache when i got stuck.
i have Ubuntu Server 9.10 whit Apache2
Let me begin to show my config files.
ports.conf
Code:
#NameVirtualHost *:80
Listen 80
<IfModule mod_ssl.c>
# SSL name based virtual hosts are not yet supported, therefore no
# NameVirtualHost statement here
[Code]....
Ubuntu Servers :: View How Many Users Are On Site?
Aug 19, 2010I have apache installed on my server. Is there a way to view how many users are on my site?
View 3 Replies View Related