Ubuntu :: Upgrade And Cannot Use HP Photosmart Premium Anymore

May 11, 2010

I upgraded from 9.4 to latest version of Ubuntu. Now I cannot connect wireless printer. States I do not have the required packages. I have loaded about everything zI can find relating to Bluetooth and it still will not connect. I have a Linksys router. Also, in my System (both preferences and administrative) I can no longer find the "Printer" section.

View 2 Replies


ADVERTISEMENT

OpenSUSE Hardware :: HP Photosmart Premium / C309a Does Not Print On Photopaper?

Dec 29, 2009

I have a brand new HP Photosmart. I am using digiKam and try to make it print photos from the photo paper tray. But it only uses the normal tray. If I select the photo paper tray before printing manually from the try icon tool I get a message the paper was not ok "Papier unzulssig".additional info: I cannot make it print under gimp at all. I use Suse 11.2 64bit and hplip 3.9.8

View 4 Replies View Related

Ubuntu Installation :: Upgrade From 10.04 To 10.10 - Access The System Settings Anymore?

Dec 5, 2010

I was running 10.04 on my Asus EEE PC. Today I upgraded from 10.04 to 10.10, but with lots of regrets. The complete desktop changed. I don't even know how to access the system settings anymore. I just wanted to start up the Twonky Media server from my personal folder again, which resides in my personal user folder, but I cannot find the folder at all! Shame on the Ubuntu team to throw around the user experience so much. The Ubuntu Linux distribution has gone back to a nerdy level, I hoped it had recovered from that. Make-the-user-feel-at-home! Is that so difficult?

Where is my Favorite group, where is my System group, where is my personal Home user folder? I'm sure I can find them on my own, but it's a shame that my user experience has been taken into a rolercoaster. Why make it so difficult on the user Ubuntu, why?

View 9 Replies View Related

Ubuntu Installation :: Crypted Disk Not Mounted Anymore After Upgrade

Dec 22, 2010

After upgrade from 10.04 to 10.10 I can't mount anymore my crypted disk image.I've an old backup of this image, but when I try to mount it, system give me same errors.

View 2 Replies View Related

Ubuntu :: Natty Kernel Upgrade - Mouse Not Working Anymore?

May 4, 2011

since I just upgraded my Natty to the new Kernel my Logitech USB mouse won't work anymore. I checked it on another notebook and the mouse works fine Before the upgrade, everything was fine as well.

Code:
xaitax@w00t:~$ uname -a
Linux w00t 2.6.38-9-generic #43-Ubuntu SMP Thu Apr 28 15:23:06 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux

[Code]....

View 3 Replies View Related

Ubuntu Installation :: 10.04 LTS AMD64 - Upgrade To 2.6.32-33 Doesn't Boot Anymore

Jul 18, 2011

This morning I switched my machine and the Update Manager prompted me to upgrade.So, as usual I did it. After upgrade it asked me to restart. Since then id didn't boot anymore. Now I have blank screen with a blinking cursor ... immediately after the BIOS screen, so it looks that no OS is loaded.

View 9 Replies View Related

Ubuntu Installation :: Upgrade 9.10 To 10.04: Keyboard Doesn't Work On X Login Anymore

Apr 30, 2010

Just before Lucid was released, I installed karmic on a vanilla VM in 64-bit mode, and all was good. Did a desktop setup and afterwards installed Eclipse, and I was happy: A new system for coding on-the-go! Now, after upgrading to Lucid with do-release-upgrade -d, I can no longer enter my password on X login. The keyboard just doesn't work for some reason. When I enable the onscreen keyboard, and click my password, I can login. The strange thing is that my keyboard works like a charm after I've logged into my X session?

View 7 Replies View Related

Ubuntu :: Maverick: Suspend Fails - Doesn't Work Anymore Since Upgrade From 10.04 To 10.10

Oct 12, 2010

I upgraded from 10.04 to 10.10 Worked fined, but suspend doesn't work anymore. When I click suspend, a tty1 terminal screen appears, exactly as you would hit ctrl+alt+F1, with the exception that no input is possible. I'm a newbie and an Ubuntu fan but I absolutely have no idea how to solve this...

View 5 Replies View Related

Debian Configuration :: Stylus Button Not Working Anymore After An Upgrade?

May 18, 2010

after today's upgrade, my Wacom stylus button stopped working.My xorg.conf is as follows:

Section "ServerLayout"
Identifier "X.org Configured"
Screen"Screen0" 0 0

[code]....

View 3 Replies View Related

Ubuntu :: How To Connect To Windows 7 Home Premium Share

Dec 26, 2010

I am having difficulty connecting to a PC that runs Windows 7 (and suffice it to say Windows XP as well). I go to Places > Connect to Server and choose Windows share from the drop-down list. I enter in the computer's IP address in the Server field and click Connect, when I'm brought to the "Password required for x" screen (x being the IP address). I enter my username for the Windows machine, leave the Domain field as is (it is WORKGROUP by default, which is the Workgroup name for both PCs), and then I enter my Windows password. The dialog keeps popping up as if I entered incorrect credentials. I do want to point out, on the dialog, it asks for a Domain name. Since I do not have this computer connected to a domain (I'm at home), it is a workgroup network. However, prior to Ubuntu 10.10, I was able to use this method to connect to Windows computers.

View 9 Replies View Related

Ubuntu Installation :: Failed Dual Install With Vista Premium 32 Bit

Jun 22, 2010

If i now try to install, but not a dual boot v10.4 will I now be able to get to my windows files - eg data type stuff such as spread sheets or doc files under Ubuntu or does it just not even read windows stuff?or should I rush off and get Windows sorted out first?

View 3 Replies View Related

Ubuntu :: Need Accelerator To Download Files From Fileshare With Premium Account

Nov 25, 2010

I need a Download Accelerator that will allow me to download files from Fileshare with my premium account and will also allow me to add more that one link at once. Chrome integration would be nice as well.

View 2 Replies View Related

General :: Finding Drivers For P6X58D Premium?

May 9, 2010

I'm building up a server with a friend. I'm in charge of the hardware and my friend about software (linux distribution, etc). after searching through many models of motherboards I've found one candidate: Asus P6X58D Premium. Then, I realized that probably, there isn't any driver for that motherboard. So, I've browsed to [URL] then on the download tab and discovered there was: "DOS, Netware, Unixware, Windows 2000 to 7 x64 and others" but no Linux option

So, I've searched in other similar motherboards: for example P6T Deluxe. At the Linux option, the drivers were about audio issues....So, does really need a distribution x64 for server based on Debian, Ubuntu, etc, these drivers to work correctly on Asus P6X58D Premium?

View 1 Replies View Related

Fedora Hardware :: 13 & Asus P5Q Premium Kernel Panic?

Sep 21, 2010

Fedora 13 on Asus P5Q Premium, E7500 hangs after 10mins to 2 hour. After some trial and error, I found that the problem could be related to yum although it could be that it is only by running yum that I've been able to trace the problem. On runlevel 3 (to make sure it's not an X server problem), system hangs and prints the following message on the screen (copied it by hand, still have to figure out where to find it after system restart):

BUG: unable to handle kernel NULL pointer dereference at 00...0695
Ooops: 0000 [01] SMP
last sysfs file /sys/devices/virtual/block/md127/md/raid-disks
CPU 0

[code]....

I have a hw RAID setup but the problem is the same, only the numbers are a bit different.

It is not a hw-related problem either because both the latest Suse and Kubuntu install without problems (although both seem to have problems in starting with RAID installed, normal disk is OK). Of course, I only have myself to blame because Asus says that this mb is compatible with FC8 - I haven't been able to test because my machine seems to have problems in booting from install DVD - but I suspect it is because that was the time this mb was launched and they haven't tried it on more recent Fedora distros.

Interestingly enough, the same problem comes with F12 and F11, didn't have energy to go further back. I've been using RedHat since ver 5.2. and would hate to give up following the path now. Fedora just stands out from the crowd so much that I can tolerate some inconveniences. This is just a bit too much.

View 3 Replies View Related

Ubuntu :: HP Photosmart Plus Printer?

Mar 3, 2010

I just bought an HP Photosmart Plus B209a Printer. It does everything except actually print. It even says the job is �completed" but nothing was done. I repeated the installation 5 times with same results. Before buying, I tried to find out which printer worked. I was told by HP that all of their printers worked on Ubuntu Linux. Best Buy agreed. Is there a solution that I can understand, or must I give in and go back to dreaded Windows just so I can print? Printing seems to be a real Ubuntu Linux shortfall and major roadblock - at least from this Newbies'point of view. Is Ubuntu a poor choice for printing of the Linux options? I really want my Linux to work instead of being forced to return to The Dark Side.

I did this repeatedly: If your printer was not detected after a few moments, then you will need to follow these steps:

1.Obtain the model name of your printer.

2.Ensure the printer is turned on.

3.Choose System â–¸ Administration â–¸ Printing

4.Click New Printer.

View 5 Replies View Related

Ubuntu Installation :: 10.10 64bits In Asus M2n32-sli Premium Vista Edition - Don't Show HDD

Oct 16, 2010

i try installing the ubuntu 10.10 in motherboard asus m2n32-sli premium vista edition, but ubuntu installer don't show my HDD. I have three HDD serial-ata in my computer.

View 3 Replies View Related

Ubuntu :: Ppd File For Hp Photosmart B109n-z

Jul 17, 2010

I'm trying to set up my wirless printer, it worked on Monday but now the hp setup application claims it needs a ppd file that doesn't exist!

View 1 Replies View Related

OpenSUSE Hardware :: Building A New GNU Boxen With ASUS P6X58D Premium Motherboard?

Jul 6, 2010

I'm starting to spec out a new GNU/Linux boxen. I'm considering the ASUS P6X58D Premium motherboard. Has anyone had any experience with this board in terms of compatibility with openSUSE 11.2/11.3? I'm mainly concerned about:

on-board sound: Realtek ALC889
ethernet: Marvell 88E8056
new interfaces: SATA3, USB3.0

being able to use: AHCI (which I had to turn off on a netbook, Acer Aspire 1410, for hard drive stability), 64-bit kernel I'm planning to use an i7-930 or i7-950 (should the price drop in August as rumored) with 6 GB DDR3 1333 RAM (not planning to overclock, as yet). The graphics card will probably be an NVidia GT240 or so (budgeting about $100 for the graphics card).

Also, I'm hoping to move some old IDE drives over using IDE->SATA 1 bridge cards. Any advice on this? Or should I just get a new SATA 3 drive? For the optical drives (DVD RW/CD RW), I'd like to use bridge cards since there's no benefit for the higher speed SATA interface, or is there?

P.S. For the naive question: As I haven't dealt with 64-bit installs before... I would need the 64-bit kernel for full access to all the extra address space, correct? After that, I can still run 32-bit apps, with a slight speed penalty?

View 1 Replies View Related

Slackware :: HP PhotoSmart Plus All-in-one Difficulties In 13.37?

Jun 25, 2011

Having looked at the various threads on the forum I have not seen one that seems to answer my issue. About a week ago I tried installing my HP Printer (PhotoSmart Plus) and was unable to due to me not having run rc.cups. I have now done that and the installation of the printer went smoothly, it was detected over the network and the correct ppd was identified (seems it is actually on the firmware of the printer) and I was able to add the printer with the HPLIP (version 3.11.3a).

However right after the printer was added HPLIP tries to get a status report on the printer, this is when I get an error "Device communication error (5012)". I have attached a screenshot of what I see. I also tried scanning from the device and I get similar errors that the device isn't responding etc. The printer is attached to the network via wireless and I am trying to print to it using my laptop also connected to the network via wifi (doubt that has any bearing but just FYI). edit: I have found on an old Ubuntu discussion that one solution a user had for this specific problem was to install SNMP... I didn't add SNMP when I installed Slackware earlier today, could this assist...?

edit 2: CUPS on localhost:631 shows the printer as idle (did attempt to print just to see but no go...

View 4 Replies View Related

Fedora :: Running A Dual Boot Windows 7 Home Premium And 12 System On An AMD Phenom Platform

May 31, 2010

I am/was(?) running a dual boot Windows 7 Home Premium and Fedora 12 system on an AMD Phenom platform.

I thought that I would try the KDE desktop and installed it with the command

yum groupinstall "KDE (K Desktop Environment)"

After tasting KDE for a while I decided that I far prefer Gnome.

I removed the KDE with

yum groupremove "KDE (K Desktop Environment)"

This appeared to work but I then found that whilst I can boot into Windows 7, I can no longer boot into Fedora 12.

I have tried booting the F12 DVD and going into to the Rescue function. I re-installed grub but still cannot boot into F12.

I have looked at grub.conf but can see nothing wrong.

View 14 Replies View Related

Hardware :: Can't Scan With HP Photosmart (Fedora 13)

Feb 6, 2011

I can print with HP Photosmart Plus e-All-in-One B210a with Fedora 13, but I can't scan anything. I'm using HPLIP 3.

View 3 Replies View Related

Software :: Run File For HP Photosmart 8180?

Aug 2, 2010

I just got a .run file for my HP Photosmart 8180, but it's in .run format! What now?

View 3 Replies View Related

Ubuntu :: Xsane - HP Photosmart C3180 Only Scan Part Of Document

Mar 2, 2010

Iam using xsane to try and scan a document to computer my scaner is a HP photosmart c3180 it only wants to scan part of document has any one found a way to get round this

View 2 Replies View Related

Ubuntu Networking :: Wireless Printing With An HP Photosmart C4500 Series?

Sep 2, 2010

I finally got around to setting up my HP Photosmart c4580 AIO printer today to print wirelessly so that I don't have to be tethered to it with a USB. I found there are many different ways of doing this, each with limited success. So I took a crack at it and this is how I got it to work. (Just an FYI, I don't think that it matters but I am running Ubuntu 10.04 64bit.) Note: I have put in screen shots of the important steps. Also, I have linked at the bottom all the relevant shots. In a terminal type

Code:
hpsetup

After pushing enter a GUI will pop open call "HP Device Manager - Setup". There are four radio buttons, I selected the "Wireless/802.11 (requires a temporary USB connection and is only available for select devices)" one and then clicked Next.

Clicking Next opens a new window for Wifi Configuration. Read what it says (Which is; after configuration setup will continue, this configuration may not work, and connect your printer to your computer by a USB cable!) Now click "Next". Assuming you haven't forgotten to plug your printer into your computer (and turn it on) you will get a "Discovered Wireless Capable Devices" list with something on it. If you do not have anything listed under "Model" and "Device URI" check all your connections and the power to your printer and click refresh. If still nothing I am sorry but this setup has failed you, but if you are lucky and something shows up, click on it and then click next. You have to have wireless internet to continue. The step you are on now has you select your wireless internet connection. Find your's and click next.

Now in the next screen you have to enter in your password for your wireless internet, then push connect. Once you connect you have now just given me access to your online banking and I am withdrawing money as you read this! I'm probably just kidding! I just wanted to make sure I haven't lost you yet. But you do want to enter your password and push enter.

After you push connect you should get a little 'progress' screen. After that is done loading you will see a screen that looks like, Now on a piece of paper or something else, write down your hostname and your IP address. After you have done that unplug the USB from your computer and click finish. Now what happens next, I could not explain. But you remember earlier the wizard said that setup would continue after configuration? Yeah well it didn't for me. And here is what it looked like.

Notice no printers available to select, and even in the terminal it shows an error. Either way, we have the information that we need to finish things up outside of this 'hpsetup' wizard. So just click cancel, close the terminal, and go back to the desktop. Now on your desktop go to System>Administration>Printing That will open a window that shows your current printer profiles. Click the add button to get a screen that looks like this,

Click the plus sign + next to "Network Printer" then click on "Find Network Printer". Now on the right half of that window there is a text box labeled "host:", enter the IP address that you copied down earlier and click the button that says "Find". Once clicking "Find" , one of two things will happen; (1)It will recognize it right away, locate the driver and take you to this screen, after clicking "forward".

or (2) It will take you to a screen showing the host name and the port number. If that happens, no big deal, just click "forward" to get the above screen. Or (3) It will not recognize the IP address that you entered. If this is the case, type in the host name you copied down earlier and click find, then click "forward" to get to the above screen. Or (4) It will not be able to locate a suitable driver. If this last scenario plays out for you then I am sorry but I don't know what to do. So lets just hope that doesn't happen. Alright now that you are on the above screen. Type in a name that you would like your computer to call your printer.

Then click "Apply". Once you click "Apply" that window will close and it will take you back to your printer list. You should notice a new printer in your lineup. Also, it is asking you if you would like to print a test page. Before you pick one, double check that your USB cable is no longer plugged in to your computer from the printer. Now, clicked "No" or "Yes". I chose "No" because test printing takes up a lot of ink. Instead of the test page I just went to my gmail and printed an e-mail. And guess what?! It worked!

View 4 Replies View Related

Ubuntu :: Installing A HP Photosmart C310a Printer Using A Wireless Connection?

Dec 18, 2010

Using Ubuntu Desktop 10.10 in a VMware virtural machine. Can anyone point me to instructions for installing an HP Photosmart C310a printer using a wireless connection?

View 3 Replies View Related

Ubuntu Networking :: HP Photosmart Plus B209 - Can't Get The Wireless Connection To Work

Mar 17, 2011

I recently installed a HP photosmart everything works fine but I can't get the wireless connection to work.

View 1 Replies View Related

CentOS 5 :: How To Install HP Photosmart C5180 Not Listed

Jul 28, 2010

I would like to know how I can install my hp c5180 on CentOS 5.5?My printer is connected to the computer with an ethernet cable.The matter is that my printer is not listed, I would like to know if there is a way to handle this?

View 1 Replies View Related

Ubuntu Networking :: HP Photosmart D110 - Message - Try Scan From Computer Or See Documentation

Feb 2, 2011

My computer recognizes the printer and has no trouble printing out any documents. The printer can scan papers to a memory card and makes copies just fine too. But when I select "Scan to PC" I get the message "Try scan from computer or see documentation. Press OK." Of course, the printer included next to no documentation, only the basic plug-it-in-and-turn-it-on instructions. Simple Scan said that it did not find a scanner.

View 8 Replies View Related

Ubuntu :: Dual Booted Ubuntu 8.10 Inside Of Windows Vista Home Premium X64?

Feb 26, 2009

Recently I decided I wanted to try installing Ubuntu 8.10 inside of my Vista Home Premium x64 system.Ubuntu installs correctly, but when I try booting into Ubuntu from the boot screen, I get the black screen that tells me it's loading several components of the system, and then it suddenly stops at "Starting bluetooth..." or something of that general nature.

View 2 Replies View Related

Fedora Networking :: HP Photosmart C6380 - WIFI Installation On 11?

Aug 5, 2009

I bought a HP Photosmart C6380 Printer a few days ago, and i am trying to make it work on my Laptop with Fedora 11 installed on it. Like all the ither posts concerning this problem, when i connect the printer by USB it works without a problem. I can ping the printer with success and i can also access the Web interface of the Printer. So i think that the Printer is connected correctly to my WIFI network. I have tried several things.

- I have tried to install it with CUPS, selected "HP JetDirect", put in the IP-Adress of the Printer, selected the driver for 6300
series. In the URI i had something like "socket://<IP-Adress of the printer>:9100". After that tried to print a test page -> Nothing.

- I tried it with IPP, same result, nothing.

- I also tried, after having read a lot here, to put "http://<IP-Adress of the printer>". After that, i tried to print a test page, and the printer seemed to work. But what i got was a lot of crap, really unreadable things.

Quote:

POST / HTTP/1.1
Content-Length: 492
Content-Type: application/ipp

[code].....

Here i got unreadable things

- I also tried the CUPS web interface without any result.

- I also tried HPLIP. Downloaded the latest version and installed it. After installation i ran "hp-setup". I tried all the three steps, the only one that worked was step one, USB. For the rest nothing worked. I did not try the printer connected by Ethernet, but i think that this should work, because i tried an HP printer at work an that worked. I have an WIFI access point, so no ad-hoc connection. On my wife's Laptop, where Windows Vista is installed, the printer works without any problem.

View 11 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved