Software :: Run File For HP Photosmart 8180?
Aug 2, 2010I just got a .run file for my HP Photosmart 8180, but it's in .run format! What now?
View 3 Replies
ADVERTISEMENT
Ubuntu :: Ppd File For Hp Photosmart B109n-z
Jul 17, 2010I'm trying to set up my wirless printer, it worked on Monday but now the hp setup application claims it needs a ppd file that doesn't exist!
View 1 Replies View RelatedOpenSUSE Hardware :: HP-Photosmart C4680 Not Recognized - Pdd File Is Not There
Dec 1, 2010I'm having some problems with my printer...i just installed suse (today) and tried to install the printer... i looked online and installed hplit, then followed the setup till the program recognizes my printer (he says is 4600, dunno why) and then ask me to associate the PDD file... only thing is that the pdd file is not there....
I runned the hp-check -t and this is the result:
Hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installedto successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
SYSTEM INFO:
To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
HPLIP INSTALLATION:
Slackware :: HP PhotoSmart Plus All-in-one Difficulties In 13.37?
Jun 25, 2011Having looked at the various threads on the forum I have not seen one that seems to answer my issue. About a week ago I tried installing my HP Printer (PhotoSmart Plus) and was unable to due to me not having run rc.cups. I have now done that and the installation of the printer went smoothly, it was detected over the network and the correct ppd was identified (seems it is actually on the firmware of the printer) and I was able to add the printer with the HPLIP (version 3.11.3a).
However right after the printer was added HPLIP tries to get a status report on the printer, this is when I get an error "Device communication error (5012)". I have attached a screenshot of what I see. I also tried scanning from the device and I get similar errors that the device isn't responding etc. The printer is attached to the network via wireless and I am trying to print to it using my laptop also connected to the network via wifi (doubt that has any bearing but just FYI). edit: I have found on an old Ubuntu discussion that one solution a user had for this specific problem was to install SNMP... I didn't add SNMP when I installed Slackware earlier today, could this assist...?
edit 2: CUPS on localhost:631 shows the printer as idle (did attempt to print just to see but no go...
Ubuntu :: HP Photosmart Plus Printer?
Mar 3, 2010I just bought an HP Photosmart Plus B209a Printer. It does everything except actually print. It even says the job is �completed" but nothing was done. I repeated the installation 5 times with same results. Before buying, I tried to find out which printer worked. I was told by HP that all of their printers worked on Ubuntu Linux. Best Buy agreed. Is there a solution that I can understand, or must I give in and go back to dreaded Windows just so I can print? Printing seems to be a real Ubuntu Linux shortfall and major roadblock - at least from this Newbies'point of view. Is Ubuntu a poor choice for printing of the Linux options? I really want my Linux to work instead of being forced to return to The Dark Side.
I did this repeatedly: If your printer was not detected after a few moments, then you will need to follow these steps:
1.Obtain the model name of your printer.
2.Ensure the printer is turned on.
3.Choose System ▸ Administration ▸ Printing
4.Click New Printer.
Hardware :: Can't Scan With HP Photosmart (Fedora 13)
Feb 6, 2011I can print with HP Photosmart Plus e-All-in-One B210a with Fedora 13, but I can't scan anything. I'm using HPLIP 3.
View 3 Replies View RelatedUbuntu :: Upgrade And Cannot Use HP Photosmart Premium Anymore
May 11, 2010I upgraded from 9.4 to latest version of Ubuntu. Now I cannot connect wireless printer. States I do not have the required packages. I have loaded about everything zI can find relating to Bluetooth and it still will not connect. I have a Linksys router. Also, in my System (both preferences and administrative) I can no longer find the "Printer" section.
View 2 Replies View RelatedCentOS 5 :: How To Install HP Photosmart C5180 Not Listed
Jul 28, 2010I would like to know how I can install my hp c5180 on CentOS 5.5?My printer is connected to the computer with an ethernet cable.The matter is that my printer is not listed, I would like to know if there is a way to handle this?
View 1 Replies View RelatedFedora Networking :: HP Photosmart C6380 - WIFI Installation On 11?
Aug 5, 2009I bought a HP Photosmart C6380 Printer a few days ago, and i am trying to make it work on my Laptop with Fedora 11 installed on it. Like all the ither posts concerning this problem, when i connect the printer by USB it works without a problem. I can ping the printer with success and i can also access the Web interface of the Printer. So i think that the Printer is connected correctly to my WIFI network. I have tried several things.
- I have tried to install it with CUPS, selected "HP JetDirect", put in the IP-Adress of the Printer, selected the driver for 6300
series. In the URI i had something like "socket://<IP-Adress of the printer>:9100". After that tried to print a test page -> Nothing.
- I tried it with IPP, same result, nothing.
- I also tried, after having read a lot here, to put "http://<IP-Adress of the printer>". After that, i tried to print a test page, and the printer seemed to work. But what i got was a lot of crap, really unreadable things.
Quote:
POST / HTTP/1.1
Content-Length: 492
Content-Type: application/ipp
[code].....
Here i got unreadable things
- I also tried the CUPS web interface without any result.
- I also tried HPLIP. Downloaded the latest version and installed it. After installation i ran "hp-setup". I tried all the three steps, the only one that worked was step one, USB. For the rest nothing worked. I did not try the printer connected by Ethernet, but i think that this should work, because i tried an HP printer at work an that worked. I have an WIFI access point, so no ad-hoc connection. On my wife's Laptop, where Windows Vista is installed, the printer works without any problem.
OpenSUSE Install :: Installing HP Photosmart B110 Printer On 11.0?
Nov 22, 2010I am trying to install my new HP Photosmart b110 All-in-one printer on my notebook, but it seems to be very hard...I have Opensuse 11.0 x86-64. I tried to install hplip from the web, but neither the 3.10.9 nor the 3.10.6 version works. Automatic installation is a disaster: the driver tries to resolve dependencies, which are impossible to resolve, probably because - I realized - support to opensuse 11.0 was stopped. So I tried with custom installation, avoiding all those features leading to strage dependencies, but also in this case I get an error: "make failed with exit status 2", or something similar...
should I necessarily switch to 11.2 or 11.3 version? in this case, is it possible to upgrade directly from 11.0 to 11.3 without loosing data..?
CentOS 5 Hardware :: Hp Photosmart 1000 - Where To Get The Printer Drivers
Feb 26, 2010I want to install hp photosmart 1000 printer on my centos 5.4 but i dunno where to start. where I can get the printer drivers and how to install it and possibly share the printer?
View 1 Replies View RelatedFedora Hardware :: HP Photosmart B109a Scan Doesn't Work
Feb 25, 2010Printing works fine. I've printed documents ant photos - all is ok.Build-in card-reader works well.But I can't scan with him in fedora.I've installed libsane-hpaio .
View 9 Replies View RelatedOpenSUSE Hardware :: HP Photosmart Premium / C309a Does Not Print On Photopaper?
Dec 29, 2009I have a brand new HP Photosmart. I am using digiKam and try to make it print photos from the photo paper tray. But it only uses the normal tray. If I select the photo paper tray before printing manually from the try icon tool I get a message the paper was not ok "Papier unzulssig".additional info: I cannot make it print under gimp at all. I use Suse 11.2 64bit and hplip 3.9.8
View 4 Replies View RelatedUbuntu :: Xsane - HP Photosmart C3180 Only Scan Part Of Document
Mar 2, 2010Iam using xsane to try and scan a document to computer my scaner is a HP photosmart c3180 it only wants to scan part of document has any one found a way to get round this
View 2 Replies View RelatedUbuntu Networking :: Wireless Printing With An HP Photosmart C4500 Series?
Sep 2, 2010I finally got around to setting up my HP Photosmart c4580 AIO printer today to print wirelessly so that I don't have to be tethered to it with a USB. I found there are many different ways of doing this, each with limited success. So I took a crack at it and this is how I got it to work. (Just an FYI, I don't think that it matters but I am running Ubuntu 10.04 64bit.) Note: I have put in screen shots of the important steps. Also, I have linked at the bottom all the relevant shots. In a terminal type
Code:
hpsetup
After pushing enter a GUI will pop open call "HP Device Manager - Setup". There are four radio buttons, I selected the "Wireless/802.11 (requires a temporary USB connection and is only available for select devices)" one and then clicked Next.
Clicking Next opens a new window for Wifi Configuration. Read what it says (Which is; after configuration setup will continue, this configuration may not work, and connect your printer to your computer by a USB cable!) Now click "Next". Assuming you haven't forgotten to plug your printer into your computer (and turn it on) you will get a "Discovered Wireless Capable Devices" list with something on it. If you do not have anything listed under "Model" and "Device URI" check all your connections and the power to your printer and click refresh. If still nothing I am sorry but this setup has failed you, but if you are lucky and something shows up, click on it and then click next. You have to have wireless internet to continue. The step you are on now has you select your wireless internet connection. Find your's and click next.
Now in the next screen you have to enter in your password for your wireless internet, then push connect. Once you connect you have now just given me access to your online banking and I am withdrawing money as you read this! I'm probably just kidding! I just wanted to make sure I haven't lost you yet. But you do want to enter your password and push enter.
After you push connect you should get a little 'progress' screen. After that is done loading you will see a screen that looks like, Now on a piece of paper or something else, write down your hostname and your IP address. After you have done that unplug the USB from your computer and click finish. Now what happens next, I could not explain. But you remember earlier the wizard said that setup would continue after configuration? Yeah well it didn't for me. And here is what it looked like.
Notice no printers available to select, and even in the terminal it shows an error. Either way, we have the information that we need to finish things up outside of this 'hpsetup' wizard. So just click cancel, close the terminal, and go back to the desktop. Now on your desktop go to System>Administration>Printing That will open a window that shows your current printer profiles. Click the add button to get a screen that looks like this,
Click the plus sign + next to "Network Printer" then click on "Find Network Printer". Now on the right half of that window there is a text box labeled "host:", enter the IP address that you copied down earlier and click the button that says "Find". Once clicking "Find" , one of two things will happen; (1)It will recognize it right away, locate the driver and take you to this screen, after clicking "forward".
or (2) It will take you to a screen showing the host name and the port number. If that happens, no big deal, just click "forward" to get the above screen. Or (3) It will not recognize the IP address that you entered. If this is the case, type in the host name you copied down earlier and click find, then click "forward" to get to the above screen. Or (4) It will not be able to locate a suitable driver. If this last scenario plays out for you then I am sorry but I don't know what to do. So lets just hope that doesn't happen. Alright now that you are on the above screen. Type in a name that you would like your computer to call your printer.
Then click "Apply". Once you click "Apply" that window will close and it will take you back to your printer list. You should notice a new printer in your lineup. Also, it is asking you if you would like to print a test page. Before you pick one, double check that your USB cable is no longer plugged in to your computer from the printer. Now, clicked "No" or "Yes". I chose "No" because test printing takes up a lot of ink. Instead of the test page I just went to my gmail and printed an e-mail. And guess what?! It worked!
Ubuntu :: Installing A HP Photosmart C310a Printer Using A Wireless Connection?
Dec 18, 2010Using Ubuntu Desktop 10.10 in a VMware virtural machine. Can anyone point me to instructions for installing an HP Photosmart C310a printer using a wireless connection?
View 3 Replies View RelatedUbuntu Networking :: HP Photosmart Plus B209 - Can't Get The Wireless Connection To Work
Mar 17, 2011I recently installed a HP photosmart everything works fine but I can't get the wireless connection to work.
View 1 Replies View RelatedOpenSUSE Hardware :: USB Print Server On HP Photosmart C4480 Compatibility List?
Mar 27, 2011I'm interested to buy an usb print server for my HP C4480. Before spend money I prefer to be sure to choose the right device. My printer is HP Photosmart C4480 an it works perfectly with Opensuse (my version is 11.3).
I've seen on ebay a very cheap one, but it seems just mac/windows and compatibile. I need your advices and your experience to know which device could be suitable for my situation. I don't want to spend too much money, not interested in brands but just in something that works.
Ubuntu Networking :: HP Photosmart D110 - Message - Try Scan From Computer Or See Documentation
Feb 2, 2011My computer recognizes the printer and has no trouble printing out any documents. The printer can scan papers to a memory card and makes copies just fine too. But when I select "Scan to PC" I get the message "Try scan from computer or see documentation. Press OK." Of course, the printer included next to no documentation, only the basic plug-it-in-and-turn-it-on instructions. Simple Scan said that it did not find a scanner.
View 8 Replies View RelatedGeneral :: Install A HP Photosmart C4780 Wireless Printer In Open SUSE
Apr 24, 2011How do I install an HP Photosmart C4780 wireless printer in open SUSE
View 1 Replies View RelatedFedora Hardware :: HP Photosmart C4400 Series Refuses To Print Photo On 10x15cm Paper?
Feb 22, 2011I got trouble to print a photo of 10x15 cm to HP Photopaper (which was delivered with the printer itself). I printed from the UI and set the size according to the papersize (both 10x15cm) and just hit print in "High Quality". The paper gets drawn in, but then the tiny LCD screen on the printer tells me - Wrong paper size, please insert a larger paper, I have to hit the Ok/Cancel button on the Printer but the effect is the same, the printer spits the empty photo paper in front of me.Does anyone have a tipp where to look at?
View 12 Replies View RelatedDebian Installation :: When Connect The Printer, Doesn't Recognize Printer As The Photosmart B109 Printer For Unknown Reason?
Jan 3, 2011I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies View RelatedOpenSUSE Install :: Creating ISO-file From Burnt ISO-file On CD-R Gives Different File Length
Jul 25, 2010I downloaded three iso-images, 1 dvd-image and 2 cd-images:
openSUSE-11.3-DVD-i586.iso
openSUSE-11.3-GNOME-LiveCD-i686.iso
openSUSE-11.3-KDE4-LiveCD-i686.iso
Being paranoid, I created iso-files from the burnt DVD-R and the two burnt CD-R to verify integrity.
The iso-file of the DVD-R was identical to the downloaded image. Both iso-files created from the CD-R were different in size.
The original size of openSUSE-11.3-KDE4-LiveCD-i686.iso is 719.323.136 Bytes.
I only got 718.938.112 Bytes when recreating an ISO-file from my CD-R.
The CD-R is from Sony. When the length of my ISO-file doesn't correspond to the downloaded one, the checksum file verification doesn't work.
General :: Generated .exe File From C File - Run .exe File When Linux System Starts Up?
Apr 6, 2010i have generated .exe file from C file (ie filename.c ) after compiling in linux machine with -O option. I wish to know about how to run that .exe file when linux system starts up ?
View 3 Replies View RelatedUbuntu Multimedia :: Convert An Ogv File To An Ogg Or Mp3 File - Or Really ANY Audio File ?
Jul 16, 2010I would like to convert OGV files to audio format.
View 4 Replies View RelatedGeneral :: Convert Fdf File To Xsf File Or Xyz File On Ubuntu 9.10_32 Bit?
Nov 7, 2010I want to convert fdf file to xsf file or xyz file on ubuntu 9.10_32 bit .
View 5 Replies View RelatedDebian :: File Upload Using Firefox - Smaller Image File Is Previewed While Bigger Image File Is Not
Dec 16, 2015I am trying to upload some pics on my Facebook account using Firefox. When I click on Facebook's file upload icon, Firefox bring up a 'File Upload' window. I noticed that smaller image file is previewed on the lower right hand corner, while bigger image file is not. Is there anyway I can change this behavior or maybe change what Firefox is using to browse my files?
View 2 Replies View RelatedUbuntu :: Edit File Inside It, Open It, Edit A File, Then Remake The Bin File?
Mar 3, 2011I have a linux.img image for ubuntu.I want to edit file inside it, how can open it, edit a file, then remake the bin file?
View 7 Replies View RelatedGeneral :: Cannot Open File In RW Mode - Filling Root File System With Log Files
Nov 3, 2010I work for a company that makes portable devices running Linux and I was recently asked to make the underlying file system read-only for "security" purposes. Since the distribution is based on LinuxFromScratch, I know that very little writing happens at run time. So, even if the device runs on a usb flash device, I doubt that putting the root file system RO will be that beneficial. I am actually more concerned about a process actually breaking because it cannot open a file in RW mode than a process going rogue and filling the root file system with log files, etc. I'd really like to ear what kind of advantages disadvantages there really is with read-only file-systems.
View 6 Replies View RelatedUbuntu Installation :: Libotcl.so: Cannot Open Shared Object File: No Such File Or Directory
Feb 15, 2010there are number of threads floating on installation of ns2..however i am unable to get it on my 64 bit system ns: error while loading shared libraries: libotcl.so: cannot open shared object file: No such file or directory
View 1 Replies View Related