Ubuntu :: Unity Doesn't Start With Driver Radeon - GLX_EXT_texture_from_pixmap
Jul 30, 2011Unity doesn't start with driver radeon - GLX_EXT_texture_from_pixmap
View 2 RepliesUnity doesn't start with driver radeon - GLX_EXT_texture_from_pixmap
View 2 RepliesI've just installed 11.04 but can't have unity since it doesn't support ATI Radeon HD 5600 series along other ATI cards. Anyone who knows when ubuntu is planning to solve this problem?
View 2 Replies View RelatedI got 11.3 64-bit installed properly the first time around and working with a Radeon HD4350. I noticed X to be somewhat sluggish on certain apps under KDE so a couple of days ago I tried to install the Catalyst 10.10 tool from the unofficial repository. I didn't like it and uninstalled it.
After some research it turned out that the proper driver is radeon so I uninstalled the radeonhd driver and rebooted hoping Xorg will pick up the radeon driver automatically as it is included with my kernel. Didn't work and I couldn't even get past the failsafe login screen. Regular boot doesn't even get to the login screen. Just hangs and won't respond to any keyboard commands.
I followed the instruction at this SDB Configuring graphics cards in openSUSE 11.3 using the ATI Xorg -configure option from level 3 console and creating a radeon xorg.conf file. It all works to the point of "startx" as regular user which just brings me back to console. Rebooting and does the same things as before under failsafe and regular. Even nomodeset doesn't help. The output error from startx in failsafe console mode is the following:
Code:
Could not open library ksmserver: Cannot load library /usr/lib64/libkdeinit4_ksmserver.so (libatiuki.so.1: cannot open shared object file: no such file or directory) reinstalling is not an option as I have a lot of custom stuff on this box.
I changed my graphics card from Nvidia GeForce 2 MX200 (drivers I used were nouveau) to ATI Radeon 9200SE (now drivers should be radeon). Unfortunately I couldn't get X to start. It leaves me to black screen with white cursor blinking. Both cards are AGP on old Slot 1 motherboard. Reason for change was that GeForce didn't support interlacing on VGA. There are no updates installed to Debian (Squeeze), because there is no internet connection on this computer currently. I tried few things but they didn't work:
* I tried to reconfigure xserver-xorg, didn't help
* I tried to make xorg.conf with X -configure and then moved it to correct place, didn't help
* I tried radeon.modeset=0 option, but it didn't help, I had some other problems with this but I think it's not important (I'll tell later if needed)
I tested Fedora 15 Alpha XFCE LiveCD, but it didn't boot because of my CPU I guess (VIA C3 1 GHz, Nehalem core). I also tested Ubuntu 10.04 LiveCD, but it told that there was an error with radeon and low graphics mode is needed or something like that. So it was as bad as Debian. I took few logs and stuff to pastebin.
Xorg.0.log
dmesg
lspci
I'm a new Mandriva user,and have no clue about Linux system,but to be honest I don't want to use Windows product anymore. So I got the Mandriva 1 Spring Gnome,and installed it on my DELL Optiplex Desktop,works fine and very fast,therefore I decided to do the same with my Studio XPS 1640,but after I got a dark screen,so I used an external display(My TV) then realized that it doesn't support the video card on it ( ATI Radeon HD4670 ),and I don't know what to do.
View 1 Replies View RelatedI'm running Fedora 13 x64 and updated the kernel to the latest version (2.6.34.7-56 to 2.6.34.7-61). I use the proprietary nvidia drivers (currently 260.19.12) so I had to compile the kernel module against the new kernel sources and reinstall the driver. The process was apparently successful, but when I try to start X nothing happens, it's as if the computer had been suspended, my monitor acts like it isn't receiving any input. I have full runlevel 3 access, and the system seems pretty much fine up to that point. Nvidia's own sanity tests which are built into the installer reported no problems with my driver.
View 14 Replies View RelatedI'm trying to fix this problem: [URL] I have a problem with fglrx driver since Catalyst 9.9. After installation and reboot I get only black screen when X tries to start and keyboard doesn't work however when I press power button then the system shuts down properly after a while. I have noticed this for the first time on Hardy after installing Catalyst 9.9 and since then I have the same problem on Karmic and Catalyst 9.10/9.11 as well. I don't understand the bold text, What is this X he's talking about?
View 7 Replies View RelatedI've got a machine with an HD 4650 and the natty live cd ends up not in unity. I've got an even older machine with a radeon xpress 200 and unity works just fine from the live cd on it. Any ideas? I didn't want to install it; I've currently got lucid installed on it.
View 9 Replies View RelatedMSI P4M890M, 512M RAM
Gigabyte HD4550 512M
1. after install i got blank wallpaper+mouse (auto login)
2. learning to Ctrl+Alt+F1 and pkill X gave me login screen where Safe Mode got me in sans Unity
3. $ /usr/lib/nux/unity_support_test -p
Code:
OpenGL vendor string: X.Org
OpenGL renderer string: Gallium 0.4 on AMD RV710
OpenGL version string: 2.1 Mesa 7.10.2
[code]....
I've got big problems with ubuntu 11.04 (32 Bit, on Lenovo T500 with ATI Mobility Radeon HD 3650)First of all i have to boot from the installation cd with the option "nomodeset".Also for the first boot from harddisk i have to set this option. After i have installed the proprietary ATI drivers i can boot with the default options but unity won't start....n dmesg i found following messages:Quote:
[ 415.901678] unity_support_t[2357]: segfault at 4 ip b76b2824 sp bfaeee50 error 4 in libGL.so.1.2[b7639000+c9000]
[ 415.905490] unity_support_t[2359]: segfault at 4 ip b75a1824 sp bfd3fa90 error 4 in
[code]....
I'm running Mint Helena.The problem is that i can'd find a driver for my ti radeon x1050 card. I've tried the mesa driver and the other things similar to it but with no result.
View 1 Replies View RelatedI just downloaded ATI Radeon x700 driver from Quote:[URL]..the file name is
Quote:
ati-driver-installer-9-3-x86.x86_64.run I gave permission as Executing file as program. I run as sudo from terminal but I get this error Quote: Error: ./default_policy.sh does not support version default:v2:i686:lib::none:2.6.31-20-generic; make sure that the version is being correctly set by --iscurrentdistro
I installed Lucid when I had my Nvidia board in the computer. Yesterday I pulled out the nvidia board and installed my new Radeon 5750. Hearing that the Open Source driver is the way to go, I first decided to try that. I edited xorg.conf replacing "nvidia" with "radeon", since this is the module name (right?) but it still doesn't seem to load. Does anyone have an example of what a properly configured xorg.conf is supposed to look like using the ATI Open Source driver? I get X up and running in "low graphics mode", but can never get beyond that.
Trying to turn on window effects causes a "searching for drivers" dialogue to appear and then disappear without success. A quick "glxinfo |grep -i render" indicates that it is indeed in the software mode. I even tried to manually modprobe the radeon module and restart GDM, but still nothing. At first I thought this was a limitation of the Open Source drivers on 5xxx series boards, but this page suggests that it should work in "gold" status. I have since installed FGLX and it is just terribly buggy, so I am hoping to use the Open Source driver.
I've always had and used Ubuntu. When I installed and did not like the stability of a certain version, I just reformatted the partition and used LiveCD. OK, on a virgin SATA, 300-gig partition, I installed 10.04 and that took the ATI Radeon 3rd-party graphics driver. No problem. Then, the family wanted 2 languages on the machine. The German keyboard screwed me in terminal and I wiped out Home and all their data. I used Scalpel to image-carve 300-gig onto a 400-gig partition and tried to re-install Ubuntu 10.10.
The ATI's fglrx will not install, that's the error. That same file prevents upgrades of Ubuntu to current status.
is this thread current for my problem with 10.10?
http://ubuntuforums.org/showthread.php?t=651566
Or, do I have that 400-gig with the backup cross-pollinating?
The last few weeks I have been dual monitoring from my lcd monitor to my hdtv. LCD was connected via vga and my tv via hdmi. To my knowledge, my pc has two graphic cards, both ATI Radeons. One I believe is on the mother board, ATI Radeon 4200HD series, and the other is in a PCI slot ATI Radeon 5600HD series. I think that when I had it dual monitored the tv was connected via 4200HD and LCD via 5600HD (could be wrong).
What I Did: Everything was working fine (i was mainly just using the HDTV as my only monitor and main monitor). As you can guess I was gaming on the hdtv, but I was not satisfied with the slight lag I felt. So I looked at forums to see what I could do and they mostly said 1) change settings on tv to game mode, 2) turn off vsync on your graphics card. So I did #1, but when I tried to do #2 I could not open my graphics cards "menu" aka CCC aka Catalyst Command Center.
So I read up on why this might happen and they said I should uninstall drivers and reinstall the drivers, so I did this as well (with most current drivers from the AMD site, version 10.9) and still I could not get into the CCC. As I was reading more forums, they were saying the 10.8 version mainly has this problem. So what I did was I downloaded 10.7 (did not install yet) and uninstalled the new 10.9. When I went to reboot the cpu after the uninstall of 10.9 there was no display on my HDTV.
I figured I just need to go back to my LCD which was still hooked up to my cpu. No display there as well. I tried dvi and vga hook ups from the monitor to both graphic cards but nothing worked to get me a display. I also tried my girlfriends monitor, which only has vga, to both graphics card and still nothing worked. So at this point I have NO display. After about an hour of trying different combinations of cords, monitors, plugs, tv's etc.,
I RANDOMLY somehow got a display with my girlfriends monitor vga to the 5600 card (I think). I had to hold the vga cord a certain way on attached to the monitor in order for the display to work. So since I had a display, I quickly installed 10.7. After installation, it did not prompt me to reboot (which I thought was weird) so I just went to properties and tried to change the resolution to the max 1600x something, to see how it looks. The screen went blank and the display never reappeared. Now I basically have NO DISPLAY again.
is it possible for me to get this driver for Ubuntu v 10.10? This is the only thing stopping me coming over fully from Win7 right now...
View 1 Replies View RelatedI have the graphic card: ATI Technologies Inc RS482 [Radeon Xpress 200M] and I want to set the driver radeon because when start the ubuntu 9.10 on live cd it's use this driver. Now load the radeonfb but when set on xorg the driver "radeon" while reboot the machine not work. When start gdm the screen becomes black and I need power off and change xorg.
View 1 Replies View RelatedI have a problem with my graphic card. My desktop effects and compiz work fine, but I cant find xorg.conf file (it seems I dont have a driver installed??). I want to play games, but I cant (warsow, and other via wine).. my computer cant start a game.
View 9 Replies View Relatedinstalling ATI Mobility Radeon x1400 driver on 9.10?
View 9 Replies View RelatedI got given an old (non brand name) laptop and have installed XP and kubuntu 10.04 on it. The graphics card is Radeon Mobility X1600. Kubuntu gets a very strange problem which does not happen in XP:
Although the installation graphics are OK (sort of, there are some strange font irregularities), when it tries to reboot and fire up the graphics all hell breaks loose, the display is broken in two parts and shifted up with the overflowing region coming up from below. I 'm guessing something in the X server is trying to start and failing because when I try to drop to a text terminal (Ctrl-Alt-F<something or other>) I get pages filling up with error messages.
Unfortunately I can't remember what the messages say and I don't want to try to recreate it in a hurry because after this happens, subsequent reboots start the computer in this split screen mode (weirdly omitting the BIOS POST message) and I 'm not sure how to get it fixed, so far removing the battery, reseting the BIOS to default and letting it cool down seem to work, eventually.
Anyway, I figured since XP seems to be fine, it must be a software problem, although I 'm mystified how it persists and jumps between reboots (the split screen persists even all the way to the BIOS menu). I tried getting the driver from the ATI site code...
Removing temporary directory: fglrx-install.i3fXeb
So, if I can't run the ATI driver, my other option is to run whatever it is that the "Hardware Drivers" KDE menu item runs to get it to sniff out the driver I need. But I can't start an X server so I need to either run whatever it is that runs behind it or get the package I need through apt-get?
I know it's an old video card, but it worked just fine on Lucid after going through the following process:
HTML Code:
http://ubuntuforums.org/showthread.php?t=1578070
Unfortunately, after installing 10.10, I hadn't been able to enable desktop effects. I've been backwards and forwards through
HTML Code:
https://help.ubuntu.com/community/RadeonDriver
[Code].....
I am new to Ubuntu for the most part, but have done a lot of research on this OS. I just freshly installed version 10.10 32 bit, and the first thing I did was follow this tutorial on installing the drivers for my HIS Radeon HD 6850. I really want to get this drivers working so I can use the 3D effects on this OS.
When I type fglrxinfo I receive:
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 136 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 14
Current serial number in output stream: 14
When I type aticonfig I get:
aticonfig: No supported adapters detected. The proprietary driver was never installed so I know that driver is not interfering. Originally the aticonfig was not found at all but with a little troubleshooting from the link above It seems to work, but obviously not recognize the card. The card works great on my windows 7 setup. If I can't get this working I may just remove Ubuntu all together, but any help would be amazing!
Card is the Radeon x300 and in the past in a wubi install I installed the propreitary ATI driver. I'd like to do that with this installation too. I've located the proper driver and tried to run in the terminal.
I get this error:
I've read were I have to uninstall the xorg drivers and make a .deb package but idk how to do that.
Running 10.04 LTS, wondering if there was a way to control fan speed using the open source radeon driver with a HD5770, it's currently far too loud even when not really being in use.
View 3 Replies View RelatedI'm having some graphics driver trouble on my Lenovo Thinkpad T500. I tried getting the ATI Proprietary driver to work (fglrx) but everytime I boot my X just crashes. Now I'm trying to use the open source driver, but i dont think its working becaues a) It doesn't detect that an external monitor is plugged in (for dual-view) and b) when i run glxinfo i get a "Error of failed request: BadRequest" message.
View 3 Replies View RelatedI (somewhat foolishly) decided to reformat windows XP and make my foray in the Ubuntu world with Ubuntu 10.04 Lucid just last week. It has treated me fairly well so far and with the help of others posts have been able to get most everything setup to my liking. However...My Problem:I tried to install the ATI drivers for my radeon 9700 using ati-driver-installer-9-3-x86.run. I tried to install it using the Ubuntu/9.04 settings, hoping that I could get it to work like that and I was quite wrong. When I restarted my computer I was started in simple graphics mode, and now I'm trying to set things right again.'ve un-installed the fglrx drivers (I think...) and now I'm stuck. Play On Linux tells me that I need to install 3D acceleration, something I know my graphics card has..
View 1 Replies View RelatedI have a performance issue using the open source radeon driver. I normally would just attribute this to the driver still not ready, but it was working fine on the Mandriva install I just wiped out. I replaced madriva in order to have Qimo sessions for my daughter to use. When I try to run glxgears the gears basically don't move.
View 4 Replies View Relateda powermac G4 with radeon 9000 RV250 in ubuntu 10.04 ppc i just want the graphic work better
View 9 Replies View Relatedwho has installed these drivers on ubuntu will help me to install ? Because I can not coped...
ati mobility radeon x1400 driver
need me 32bit driver... I found only 64 ...
I just upgraded my rig from a 4770 to a 5770 video card.
My 4770 had basic 3d support out of the box with the open source radeon driver. My 5770 doesn't seem to (basic rendering only with no compositing), although this page suggests it does:
[URL]
Is there anyone out there who is running a 5770 or knows how I can upgrade to a newer version of the open source driver? I'd rather not use catalyst (Id don't game with ubuntu) and I found the open source driver to be quite nice.