Running 10.04 LTS, wondering if there was a way to control fan speed using the open source radeon driver with a HD5770, it's currently far too loud even when not really being in use.
View 3 RepliesOut of curiosity, how can you control the fan speed?
View 9 Replies View Relatedis there any app that lets me control fan speed?
View 1 Replies View RelatedI have a Compaq Presario R4000 running Ubuntu Linux 9.10 karmic. The system runs very hot and one of the fans is wither never running or always running at the slowest speed. For a while I thought the fan was dead but I just updated the BIOS (Phoenix BIOS) and during the update, that fan suddenly kicked in at full speed! How can I get that fan to spin up during normal usage? I have tried sensors-detect but all it found was k8temp, no fans... (SpeedFan under windows found no fans either)
View 1 Replies View RelatedI have a Radeon 3870 (rv670) that seems to work great with fc13 out of the box, with one exception. The stock fan is constantly running full speed. It's too loud. Proprietary drivers don't support fc13 yet. Has anyone found a way to make this work?Edit: The best I could do was switch to ubuntu, install fglrx and then issue the following cli commandCode:aticonfig --pplib-cmd "set fanspeed 0 15"
View 1 Replies View RelatedI've recently managed to install 11.4 with both Gnome 2.32 and KDE 4.6, moving from 11.3. However, there seems to be a significant speed degradation in terms of opening applications, switching windows, clicking on links etc. I have installed the Radeon graphics drivers from YaST, without much success. IMHO, Gnome seems slightly faster than KDE; however, it's still not great.
My machine worked well with 11.3 and seemed to be going pretty well; however, I wanted new and shiny, so. The PC has an AMD dual-core chip (can't remember the exact spec). Alternatively, is there good benchmarking software I could try to see if I can get an idea of my real speed?
I'm fairly new to fedora. I used Fedora 14 on a virtual machine just to mess around with it a little while back but thats about it. As far as linux goes, I just test a bunch but can never seem to pull myself away from windows. I am hoping this is the time but these issues are the weirdest I've seen on any linux distro ever. My GPU (Radeon 5750) is running at 69C idle and the fan is at full speed. I am not overclocking it at all and I'm using the default drivers that came with fedora. It works just fine in windows and a lot cooler. How can I fix this?
I'm running the Gnome 3 desktop version, which I am also getting some graphics artifacts. In the bottom bar I get a dashed white line that comes up every time I boot and goes away when I make the bar expand. Also in the applications window I get the same dashed line at the top of the window and sometimes the top of the scroll bar. So far I really like Gnome 3 (Idk why everyone is whining about it) and I'd like to stick with Fedora, and linux for that matter
everything was looxing great and then i then I clicked System > Prefrences > apperance. I noticed that in the visual tab no option was selected.. so i clicked "extra" and lost alot of effects.... now I cant get them back? ... I am using the 11.2 ati propriatary driver.. but if I use the open source driver my moniter's resolution becomes unchangeble and there is a disgusting pink line on the left side of my screen, worse yet no 3d
View 2 Replies View RelatedSo after playing around working out how to install the latest ATI drivers as super user and finally getting it done, I restarted my computer to find out that the CCC wont open.If I run the basic version nothing happens, if I run advanced it asks for password then does nothing.
View 2 Replies View RelatedI'm running Mint Helena.The problem is that i can'd find a driver for my ti radeon x1050 card. I've tried the mesa driver and the other things similar to it but with no result.
View 1 Replies View RelatedI just downloaded ATI Radeon x700 driver from Quote:[URL]..the file name is
Quote:
ati-driver-installer-9-3-x86.x86_64.run I gave permission as Executing file as program. I run as sudo from terminal but I get this error Quote: Error: ./default_policy.sh does not support version default:v2:i686:lib::none:2.6.31-20-generic; make sure that the version is being correctly set by --iscurrentdistro
I installed Lucid when I had my Nvidia board in the computer. Yesterday I pulled out the nvidia board and installed my new Radeon 5750. Hearing that the Open Source driver is the way to go, I first decided to try that. I edited xorg.conf replacing "nvidia" with "radeon", since this is the module name (right?) but it still doesn't seem to load. Does anyone have an example of what a properly configured xorg.conf is supposed to look like using the ATI Open Source driver? I get X up and running in "low graphics mode", but can never get beyond that.
Trying to turn on window effects causes a "searching for drivers" dialogue to appear and then disappear without success. A quick "glxinfo |grep -i render" indicates that it is indeed in the software mode. I even tried to manually modprobe the radeon module and restart GDM, but still nothing. At first I thought this was a limitation of the Open Source drivers on 5xxx series boards, but this page suggests that it should work in "gold" status. I have since installed FGLX and it is just terribly buggy, so I am hoping to use the Open Source driver.
I've always had and used Ubuntu. When I installed and did not like the stability of a certain version, I just reformatted the partition and used LiveCD. OK, on a virgin SATA, 300-gig partition, I installed 10.04 and that took the ATI Radeon 3rd-party graphics driver. No problem. Then, the family wanted 2 languages on the machine. The German keyboard screwed me in terminal and I wiped out Home and all their data. I used Scalpel to image-carve 300-gig onto a 400-gig partition and tried to re-install Ubuntu 10.10.
The ATI's fglrx will not install, that's the error. That same file prevents upgrades of Ubuntu to current status.
is this thread current for my problem with 10.10?
http://ubuntuforums.org/showthread.php?t=651566
Or, do I have that 400-gig with the backup cross-pollinating?
The last few weeks I have been dual monitoring from my lcd monitor to my hdtv. LCD was connected via vga and my tv via hdmi. To my knowledge, my pc has two graphic cards, both ATI Radeons. One I believe is on the mother board, ATI Radeon 4200HD series, and the other is in a PCI slot ATI Radeon 5600HD series. I think that when I had it dual monitored the tv was connected via 4200HD and LCD via 5600HD (could be wrong).
What I Did: Everything was working fine (i was mainly just using the HDTV as my only monitor and main monitor). As you can guess I was gaming on the hdtv, but I was not satisfied with the slight lag I felt. So I looked at forums to see what I could do and they mostly said 1) change settings on tv to game mode, 2) turn off vsync on your graphics card. So I did #1, but when I tried to do #2 I could not open my graphics cards "menu" aka CCC aka Catalyst Command Center.
So I read up on why this might happen and they said I should uninstall drivers and reinstall the drivers, so I did this as well (with most current drivers from the AMD site, version 10.9) and still I could not get into the CCC. As I was reading more forums, they were saying the 10.8 version mainly has this problem. So what I did was I downloaded 10.7 (did not install yet) and uninstalled the new 10.9. When I went to reboot the cpu after the uninstall of 10.9 there was no display on my HDTV.
I figured I just need to go back to my LCD which was still hooked up to my cpu. No display there as well. I tried dvi and vga hook ups from the monitor to both graphic cards but nothing worked to get me a display. I also tried my girlfriends monitor, which only has vga, to both graphics card and still nothing worked. So at this point I have NO display. After about an hour of trying different combinations of cords, monitors, plugs, tv's etc.,
I RANDOMLY somehow got a display with my girlfriends monitor vga to the 5600 card (I think). I had to hold the vga cord a certain way on attached to the monitor in order for the display to work. So since I had a display, I quickly installed 10.7. After installation, it did not prompt me to reboot (which I thought was weird) so I just went to properties and tried to change the resolution to the max 1600x something, to see how it looks. The screen went blank and the display never reappeared. Now I basically have NO DISPLAY again.
is it possible for me to get this driver for Ubuntu v 10.10? This is the only thing stopping me coming over fully from Win7 right now...
View 1 Replies View RelatedI have the graphic card: ATI Technologies Inc RS482 [Radeon Xpress 200M] and I want to set the driver radeon because when start the ubuntu 9.10 on live cd it's use this driver. Now load the radeonfb but when set on xorg the driver "radeon" while reboot the machine not work. When start gdm the screen becomes black and I need power off and change xorg.
View 1 Replies View RelatedI have a problem with my graphic card. My desktop effects and compiz work fine, but I cant find xorg.conf file (it seems I dont have a driver installed??). I want to play games, but I cant (warsow, and other via wine).. my computer cant start a game.
View 9 Replies View Relatedinstalling ATI Mobility Radeon x1400 driver on 9.10?
View 9 Replies View RelatedI got given an old (non brand name) laptop and have installed XP and kubuntu 10.04 on it. The graphics card is Radeon Mobility X1600. Kubuntu gets a very strange problem which does not happen in XP:
Although the installation graphics are OK (sort of, there are some strange font irregularities), when it tries to reboot and fire up the graphics all hell breaks loose, the display is broken in two parts and shifted up with the overflowing region coming up from below. I 'm guessing something in the X server is trying to start and failing because when I try to drop to a text terminal (Ctrl-Alt-F<something or other>) I get pages filling up with error messages.
Unfortunately I can't remember what the messages say and I don't want to try to recreate it in a hurry because after this happens, subsequent reboots start the computer in this split screen mode (weirdly omitting the BIOS POST message) and I 'm not sure how to get it fixed, so far removing the battery, reseting the BIOS to default and letting it cool down seem to work, eventually.
Anyway, I figured since XP seems to be fine, it must be a software problem, although I 'm mystified how it persists and jumps between reboots (the split screen persists even all the way to the BIOS menu). I tried getting the driver from the ATI site code...
Removing temporary directory: fglrx-install.i3fXeb
So, if I can't run the ATI driver, my other option is to run whatever it is that the "Hardware Drivers" KDE menu item runs to get it to sniff out the driver I need. But I can't start an X server so I need to either run whatever it is that runs behind it or get the package I need through apt-get?
I know it's an old video card, but it worked just fine on Lucid after going through the following process:
HTML Code:
http://ubuntuforums.org/showthread.php?t=1578070
Unfortunately, after installing 10.10, I hadn't been able to enable desktop effects. I've been backwards and forwards through
HTML Code:
https://help.ubuntu.com/community/RadeonDriver
[Code].....
I am new to Ubuntu for the most part, but have done a lot of research on this OS. I just freshly installed version 10.10 32 bit, and the first thing I did was follow this tutorial on installing the drivers for my HIS Radeon HD 6850. I really want to get this drivers working so I can use the 3D effects on this OS.
When I type fglrxinfo I receive:
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 136 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 14
Current serial number in output stream: 14
When I type aticonfig I get:
aticonfig: No supported adapters detected. The proprietary driver was never installed so I know that driver is not interfering. Originally the aticonfig was not found at all but with a little troubleshooting from the link above It seems to work, but obviously not recognize the card. The card works great on my windows 7 setup. If I can't get this working I may just remove Ubuntu all together, but any help would be amazing!
Card is the Radeon x300 and in the past in a wubi install I installed the propreitary ATI driver. I'd like to do that with this installation too. I've located the proper driver and tried to run in the terminal.
I get this error:
I've read were I have to uninstall the xorg drivers and make a .deb package but idk how to do that.
I'm having some graphics driver trouble on my Lenovo Thinkpad T500. I tried getting the ATI Proprietary driver to work (fglrx) but everytime I boot my X just crashes. Now I'm trying to use the open source driver, but i dont think its working becaues a) It doesn't detect that an external monitor is plugged in (for dual-view) and b) when i run glxinfo i get a "Error of failed request: BadRequest" message.
View 3 Replies View RelatedI (somewhat foolishly) decided to reformat windows XP and make my foray in the Ubuntu world with Ubuntu 10.04 Lucid just last week. It has treated me fairly well so far and with the help of others posts have been able to get most everything setup to my liking. However...My Problem:I tried to install the ATI drivers for my radeon 9700 using ati-driver-installer-9-3-x86.run. I tried to install it using the Ubuntu/9.04 settings, hoping that I could get it to work like that and I was quite wrong. When I restarted my computer I was started in simple graphics mode, and now I'm trying to set things right again.'ve un-installed the fglrx drivers (I think...) and now I'm stuck. Play On Linux tells me that I need to install 3D acceleration, something I know my graphics card has..
View 1 Replies View RelatedI have a performance issue using the open source radeon driver. I normally would just attribute this to the driver still not ready, but it was working fine on the Mandriva install I just wiped out. I replaced madriva in order to have Qimo sessions for my daughter to use. When I try to run glxgears the gears basically don't move.
View 4 Replies View Relateda powermac G4 with radeon 9000 RV250 in ubuntu 10.04 ppc i just want the graphic work better
View 9 Replies View Relatedwho has installed these drivers on ubuntu will help me to install ? Because I can not coped...
ati mobility radeon x1400 driver
need me 32bit driver... I found only 64 ...
I just upgraded my rig from a 4770 to a 5770 video card.
My 4770 had basic 3d support out of the box with the open source radeon driver. My 5770 doesn't seem to (basic rendering only with no compositing), although this page suggests it does:
[URL]
Is there anyone out there who is running a 5770 or knows how I can upgrade to a newer version of the open source driver? I'd rather not use catalyst (Id don't game with ubuntu) and I found the open source driver to be quite nice.
Unity doesn't start with driver radeon - GLX_EXT_texture_from_pixmap
View 2 Replies View RelatedI'd installed Puppy and was very happy with the performance on my laptop, but I decided to switch to Debian because of the ap-get feature. I decided to go with JWM instead of one of the default desktop environments, but now I'm having to configure everything manually, and I'm pretty lost. So far, I've got X and JWM installed (though no graphical login, and have to startx manually).
Priority one is to update the video driver and get the best performance possible. I have an ATI Mobility Radeon 7500. I know the fglrx driver doesn't work with this card, but I don't know which package to install. When I type "apt-get install radeon", it spits out "E: Couldn't find package radeon"