I am unable to burn data cd's. I tried both k3b and Brasero. Both of them seems to be burning but about 70% through both say unknown error and ejects the cd. I am using cd-rw. I tried different cd's but the error is the same.
View 2 Replies
I can't burn a data disk through Ubuntu.I tried using the built-in disk creator, It had some kind of error saying the disk cannot be mounted. So I used Brasero instead and I got essentially the same error. When I tried to open both CD's the files appeared to be present but were all corrupt. Braso works fine for burning music CD's but I can't get it to work for data. here is the error log from Brasero:
BraseroReadom stderr: Time total: 131.474sec
BraseroReadom stderr: Read 666760.00 kB at 5071.4 kB/sec.
BraseroReadom stderr: HUP
Session error : Some files may be corrupted on the disc (brasero_burn_record brasero-burn.c:2862)
Trying to burn a folder full of stuff to back it all up. I've tried both Brasero and K3b, and neither will do the trick, even though they both successfully simulating the burn. Not getting much feedback on why the burn won't work - K3b says OPC failed, probably doesn't like the medium. I've tried to do the job with plenty of CDs now, so I don't think it's down to dodgy disks.
View 3 Replies View RelatedI can't burn a data disk through Ubuntu.I tried using the built-in disk creator, It had some kind of error saying the disk cannot be mounted.So I used Brasero instead and I got essentially the same error. When I tried to open both CD's the files appeared to be present but were all corrupt.Braso works fine for burning music CD's but I can't get it to work for data.here is the error log from Brasero:
BraseroReadom stderr: Time total: 131.474sec
BraseroReadom stderr: Read 666760.00 kB at 5071.4 kB/sec.
BraseroReadom stderr: HUP
BraseroReadom process finished with status 0
Session error : Some files may be corrupted on the disc (brasero_burn_record brasero-burn.c:2862)
I'm running UbuntuStudio 9.1 on my Toshiba Satellite laptop, and all other aspects of the operating system and software are fantastic - absolutely love it!I am having a serious problem with Brassero though for recording to CD. I can erase any of my re-writable cd's just fine using it, but when it comes to trying to burn a cd with it - Brassero goes through all the motions of putting the info onto CD, finalizing and then briefly displays the box saying "completed" but then immediately goes into "creating image checksum" and keeps busy doing that into forever - last time I stopped it after 35 minutes! that's absurd.
Maybe it's because the laptop has a CD/DVD combo drive, not sure, but I need CD burning software, and that is for sure.Can someone recommend a different software package that I can use to burn CD's covering everything from data to music?(or possibly help me fix whatever is wrong with Brassero?)
My DVD player attached to my TV is picky. Burn CD's (with avi files) at 8X and it plays them. 16X and it complains about bad disk. Every time. In karmic, I can only get cdrecord to burn at 16x.
Here's the command:
cdrecord -dev=/dev/scd0 -speed=8 -dao -pad -v something.iso
And it burns at 16x instead of 8x. Command issued with root privilege. Identical hardware under CentOS 5.x and it burns at 8x, like I asked it to. I'm all SATA if it matters. What do I need to do to get the version of cdrecord with karmic to burn a data CD at 8x? For whatever reason, CDs burned at 16x just don't work in the DVD player attached to my TV.
When I try to burn a data DVD with k3b it errors out telling me...
Unable to find the following files: /home/ion/.kde4/share/apps/RecentDocuments/Mon oncle d'Am+�rique (Resnais, 1980).srt.desktop
...but when I invoke (as root)...
# ls -al home/ion/.kde4/share/apps/RecentDocuments
...it retruns...
ls: cannot access home/ion/.kde4/share/apps/RecentDocuments: No such file or directory
So is k3b lying or ls?
Before you ask, fsck gave no errors. But Find files/Folders from the Application Launcher menu finds and lists it in the RecentDocuments directory as above, then tells me it is "Inaccessible". Delete does not work from GUI or CLI.
the software will go through the motions and say burn successful and all the disc itself will even have look like its been written (with the burn circle and all), but when its put into the drive afterwards its still empty. My fstab has
Code:
/dev/sr0 /mnt/cdrom0 auto users,rw 0 0
/dev/sr1 /mnt/cdrom1 auto users,rw 0 0
for my drives. Both of them do this, wondering if anyone has any idea why it might do this. I know the drives both work fine.
Forgetting bad past experience (in debian i386 and amd64), I have newly lost a new DVD in trying to create a data disk with brasero with debian i386. After successful simulation at the lowest speed, burning failed and I expect that the disk is no more good (this occurred in the past). In the past I complained with debian, getting no answer.
In contrast, I tried k3b with full success. However, as a gnome user, installation of k3b brought in so much of kde that proper use of gnome was prevented. Can anyone tell of an installation of k3b that does not hinder gnome? In particular not the startx procedure (as I normally work without calling the x server).
Now, I use Fedora Core (version 8) with core linux OS 2.6
I have some file data with size about 2G and I want to burn (write) this file to DVD rewrite.
I know linux OS can install software to burn data to DVD, but I don't have permission to install more software. I only use command line over Terminal (Gnome Terminal).
I feel really stupid here. I've looked around but no fix I can figure out. I downloaded a i386 iso of Ubuntu to install on my daughter's laptop and I can't get the CD/DVD Creator on my main computer to burn it to either CD or DVD.
I *know* I've done it before but maybe that was on Jaunty not Lucid which I have on my computer now.
I can load the iso file into CD/DVD Creator and when I get to the "Write to disc" option it says: "Write disc to: FILE IMAGE" and there is no option to write it to my CD/DVD drive. It's as if the DVD writer is not mounted.
EDIT: The md5 checksum is fine, by the way..
I have ubuntu 10.4 installed, everything works on my Toshiba A200-TJ9 laptop except for the built in webcam and mic, as well as the DVD burning function of my multi drive.The drive itself is a HD-DVD Rom with CD/DVD +/- R/RW capabilities.I did a $sudo cdrecord -scanbus and it shows:
scsibus0:
0,0,0 0)'Toshiba' "DVDW/HD TS-L802A" "TO35" Removable CD-ROM
0,1,0 1)*
0,2,0 2)*[code]...
Beyond that i know absolutely nothing, and when i put in a blank CD or DVD -R, it shows up as a blank CD/DVD-R, but its properties show as 0 bytes used, 0 bytes free and 0 bytes for capacity. And not surprisingly, Brasero says not enough disc capacity when i try to burn a 2.7 gig file onto the DVD-R.
I'm running Lucid Lynx and have been trying to burn an MP3 file to a CD-R so I could listen to it in my car. I've tried Brasero, CD/DVD creator, KB3, GnomeBaker, and VLC, and all of them failed in one way or another. Since Brasero comes stock and people have more experience with that one, I think I might describe the troubles with it.
What happens is that it doesn't seem to recognize the blank medium inserted. I open a project (either Audio CD or Data CD), add the files I want to burn. Then it says, "Please insert a writable CD or DVD if you do not want to write to an image file." I insert a blank CD-R, and it spins it, but nothing changes. The pulldown at the bottom still only gives me the choice of writing an image file. No recognition that the blank medium has been inserted and that that is where I want to burn the file. When I hit the
"burn" button, it opens a dialog box, asking me where I want to locate the image file it has called "brasero.cue"
Not sure how to do further troubleshooting on this.When I tried the same thing in GnomeBaker, I got an error message saying the burning has failed. Here's the log file from that:
wodim: No write mode specified.
wodim: Assuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
[Code]...
The burner works fine (as tested in Windows), and it reads CDs and DVDs no problem. I just can't get the burning to complete correctly. I have installed the restricted extras. I'm not really concerned WHICH program I use, I'd just like to be able to burn a CDs for road trips and whatnot.
I am unable to obtain a blank CD-R to burn the ISO. I have it installed through WUBI but due to the size restriction to 30Gig it makes it completely useless to me. I gave my CD away that I got free from shipit and they wont let me get a new one. I have an external HD formatted to NTFS with files on it that I can't lose, they are very important. I might buy a disk later but right now my funds are tight due to bills and such. I use Ubuntu more than Windows, actually Windows is pretty much never used on this machine and due to issues with it I am unable to use it.
View 3 Replies View RelatedI'm getting following error "There was an error writing to the disc: Unhandled error, aborting"
1. I write click file I want to write to DVD
2. select Write to disk
3. select Write
I'm using Fedora 10.I tried three different brands of DVD+R.I was able to burn same DVD+R few months back in the F10..but I did not try recent months.
I'm unable to burn CD-RW in K3b (error message "cdrecord has no permission to open the device"). Apparently, this is a wide-spread problem and there are a lot of posts on the internet that deal with it, but none of the advice I've found has worked so far.
I've tried the following:
(1) Updated K3b to the most recent version.
(2) Checked the device name of my CD burner (= sr0), and made sure I have access to it (sr0 is assigned to the group "drive", and I've added myself to this group, and also to "cdrom", just to be sure).
(3) Checked whether I have access to the applications /usr/bin/cdrecord, /usr/bin/wodim, and /usr/bin/cdrdao. Set the permissions to 775 (rwxrwxrx) and the ownership/group ownership to root/disk.
[Code]...
m using this command to burn the image of ubuntu....sudo mkisofs -b boot/grub/stage2_eltorito -no-emul-boot -boot-load-size 4 -boot-info-table -V "Custom Live CD" -cache-inodes -r -J -l -o ~/live-cd.iso $CDI: -input-charset not specified, using utf-8 (detected in locale settings)genisoimage: Missing pathspec.Usage: genisoimage [options] -o file directory ...Can someone tell how to workaround this error? em so close
View 5 Replies View RelatedIm trying to enable the burn feature in compiz fusion so my computer can use the effects in the applications, places and systems taskbar how would I go about doing that ?
View 6 Replies View RelatedI have been trying to burn a music CD for my old Denon HI FI tried most of the burners looked for codecs nothing seems to work or play!
I had no problems with Nero on XP.
I have a new install of OpenSUSE 11.2 and am unable to burn CD's or DVD's. I am running Gnome, but have tried both Brasero and K3B. Have ensured that the user I am logged in as is a member of the 'cdrom' group, and have cross checked the permissions on files and devices such as /dev/sr0, /usr/bin/wodim etc. Have also attempted to burn as root with no success.
[Code]...
For the longest I have been unable to burn an audio CD that contains ogg files with GnomeBaker, and have always had to decode to wav manually. Well I'm tired of doing that, so want to get to the bottom of the problem. Upon adding an ogg file to the file list, the error I receive is:
"The plugin to handle a file of type audio/ogg is not installed." I have all the gstreamer0.10-plugins-[base|bad|good|ugly] packages installed. I can play an .ogg file with rhythmbox.
Using gconf-editor, /system/gstreamer/0.10/audio/profiles/cdlossy is "active" and the cdlossy profile is listed in /system/gstreamer/0.10/audio/global/profile_list At a loss on what I need to do.
I am using 10.10 on Hp pavillon PC. I cannot burn Dual layer pavillon it gives an error message and stops.
View 11 Replies View RelatedApplied the Lucid Lynx 10.04 over the weekend.
Since then - I am unable to burn DVDs, although I can successfully read DVD's.
Everything worked fine before the upgrade.
Under Lucid Lynx I am able to burn CD's (both data files and .ISO) so it isn't the hardware.
I have tried Brasero and k3b as burners - they issue messages that the burner doesn't like the medium, which is standard DVD-R.
Bear in mind that I could burn similar DVDs *before* the upgrade...
Any help or suggestions on how to fix this please?
this dam program was working fine till I received some updates.why would we update if it just makes things worse the list of thing wrong with this os is growing like not being able to burn an iso without downloading gnome baker. video is just **** and gets worse with every xorg update pulse is like the old cereal commercial snap crackle and pop usb mounting problems to no end never ming trying to burn a Decent dvd now that I vented lol does anyone know of a fix for aramok crashing all the time while playing a song.this only started after I got some updates
I'll tell you one thing the guy who started that thread asking way we have not switched from windows yet should be hung by his gonads for sure like there is ever any chance of replacing windows with errors like this funny this is only a few the list marches on it get s bigger never smaller.The iso burning problem has been around for years now. thats all I can say is there should be a lot of **** flying upstream at xorg pulse and everyone else there work of late sucks as far as bug corrections and proper driver support
I know it 's not fedora is mostly upstream but don't we think its time for someone to say something about this garbage flowing down to us Any how if anyone knows how to get arormoko stop crashing every song. I find they work great when the first come out then the updates hit and it time to dump it for something newer
I am not able to burn audio CDs with Brasero 2.30.1, which uses cdrdao 1.2.3 However, Opensuse 11.3 comes with cdrdao 1.2.2 I don't feel comfortable replacing the version myself. Is there any plans to update cdrdao for Opensuse any time soon? PS: I am running Gnome in Opensuse 11.3
View 2 Replies View RelatedI want to burn a mp3 cd but brasero can't burn mp3 cd. How can I do this. If any further software need burn mp3 cd
View 3 Replies View RelatedI burned a bunch of files months ago on DATA dvds to keep copies just incase my external died, so i wanted to grab a few files, and the CD won't show up.
Some of them work, some dont, all were tested and confirmed to be working when i burned them a while back using Windows 7 and some where made using Vista
I Decrypted home directory and still unable to see data.
View 9 Replies View RelatedI need to be able to decrypt data, like simple text files, that have been encrypted and base64 encoded with my public key.I need to use openssl so i do:
Code:
$cat encrypted | openssl enc -base64 -d > ./answer.txt
and i get exactly the same data as before the command was run. Am i right in thinking that i need to decode before decrypting? I tried decrypting, before i realized that i had to decode first,using this command:
[Code]...
In my application, we are using Publish/subscribe model implemented in JAVA and when I implemented it on windows to windows os,it is working fine and able to publish the right data and even when I am trying the same between two different OS i.e between Windows and Solaris sparc or opensolaris. I am getting the expected data.
But when I am doing the same thing with same code on Linux and any other OS,not able to publish data on other OS's but when I am publishing the data from other OS to Linux,I am getting the right data.
