m using this command to burn the image of ubuntu....sudo mkisofs -b boot/grub/stage2_eltorito -no-emul-boot -boot-load-size 4 -boot-info-table -V "Custom Live CD" -cache-inodes -r -J -l -o ~/live-cd.iso $CDI: -input-charset not specified, using utf-8 (detected in locale settings)genisoimage: Missing pathspec.Usage: genisoimage [options] -o file directory ...Can someone tell how to workaround this error? em so close
View 5 RepliesI'm getting following error "There was an error writing to the disc: Unhandled error, aborting"
1. I write click file I want to write to DVD
2. select Write to disk
3. select Write
I'm using Fedora 10.I tried three different brands of DVD+R.I was able to burn same DVD+R few months back in the F10..but I did not try recent months.
I'm unable to burn CD-RW in K3b (error message "cdrecord has no permission to open the device"). Apparently, this is a wide-spread problem and there are a lot of posts on the internet that deal with it, but none of the advice I've found has worked so far.
I've tried the following:
(1) Updated K3b to the most recent version.
(2) Checked the device name of my CD burner (= sr0), and made sure I have access to it (sr0 is assigned to the group "drive", and I've added myself to this group, and also to "cdrom", just to be sure).
(3) Checked whether I have access to the applications /usr/bin/cdrecord, /usr/bin/wodim, and /usr/bin/cdrdao. Set the permissions to 775 (rwxrwxrx) and the ownership/group ownership to root/disk.
[Code]...
I feel really stupid here. I've looked around but no fix I can figure out. I downloaded a i386 iso of Ubuntu to install on my daughter's laptop and I can't get the CD/DVD Creator on my main computer to burn it to either CD or DVD.
I *know* I've done it before but maybe that was on Jaunty not Lucid which I have on my computer now.
I can load the iso file into CD/DVD Creator and when I get to the "Write to disc" option it says: "Write disc to: FILE IMAGE" and there is no option to write it to my CD/DVD drive. It's as if the DVD writer is not mounted.
EDIT: The md5 checksum is fine, by the way..
I have a new install of OpenSUSE 11.2 and am unable to burn CD's or DVD's. I am running Gnome, but have tried both Brasero and K3B. Have ensured that the user I am logged in as is a member of the 'cdrom' group, and have cross checked the permissions on files and devices such as /dev/sr0, /usr/bin/wodim etc. Have also attempted to burn as root with no success.
[Code]...
I have ubuntu 10.4 installed, everything works on my Toshiba A200-TJ9 laptop except for the built in webcam and mic, as well as the DVD burning function of my multi drive.The drive itself is a HD-DVD Rom with CD/DVD +/- R/RW capabilities.I did a $sudo cdrecord -scanbus and it shows:
scsibus0:
0,0,0 0)'Toshiba' "DVDW/HD TS-L802A" "TO35" Removable CD-ROM
0,1,0 1)*
0,2,0 2)*[code]...
Beyond that i know absolutely nothing, and when i put in a blank CD or DVD -R, it shows up as a blank CD/DVD-R, but its properties show as 0 bytes used, 0 bytes free and 0 bytes for capacity. And not surprisingly, Brasero says not enough disc capacity when i try to burn a 2.7 gig file onto the DVD-R.
I'm running Lucid Lynx and have been trying to burn an MP3 file to a CD-R so I could listen to it in my car. I've tried Brasero, CD/DVD creator, KB3, GnomeBaker, and VLC, and all of them failed in one way or another. Since Brasero comes stock and people have more experience with that one, I think I might describe the troubles with it.
What happens is that it doesn't seem to recognize the blank medium inserted. I open a project (either Audio CD or Data CD), add the files I want to burn. Then it says, "Please insert a writable CD or DVD if you do not want to write to an image file." I insert a blank CD-R, and it spins it, but nothing changes. The pulldown at the bottom still only gives me the choice of writing an image file. No recognition that the blank medium has been inserted and that that is where I want to burn the file. When I hit the
"burn" button, it opens a dialog box, asking me where I want to locate the image file it has called "brasero.cue"
Not sure how to do further troubleshooting on this.When I tried the same thing in GnomeBaker, I got an error message saying the burning has failed. Here's the log file from that:
wodim: No write mode specified.
wodim: Assuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
[Code]...
The burner works fine (as tested in Windows), and it reads CDs and DVDs no problem. I just can't get the burning to complete correctly. I have installed the restricted extras. I'm not really concerned WHICH program I use, I'd just like to be able to burn a CDs for road trips and whatnot.
I am unable to burn data cd's. I tried both k3b and Brasero. Both of them seems to be burning but about 70% through both say unknown error and ejects the cd. I am using cd-rw. I tried different cd's but the error is the same.
View 2 Replies View RelatedI can't burn a data disk through Ubuntu.I tried using the built-in disk creator, It had some kind of error saying the disk cannot be mounted. So I used Brasero instead and I got essentially the same error. When I tried to open both CD's the files appeared to be present but were all corrupt. Braso works fine for burning music CD's but I can't get it to work for data. here is the error log from Brasero:
BraseroReadom stderr: Time total: 131.474sec
BraseroReadom stderr: Read 666760.00 kB at 5071.4 kB/sec.
BraseroReadom stderr: HUP
Session error : Some files may be corrupted on the disc (brasero_burn_record brasero-burn.c:2862)
I am unable to obtain a blank CD-R to burn the ISO. I have it installed through WUBI but due to the size restriction to 30Gig it makes it completely useless to me. I gave my CD away that I got free from shipit and they wont let me get a new one. I have an external HD formatted to NTFS with files on it that I can't lose, they are very important. I might buy a disk later but right now my funds are tight due to bills and such. I use Ubuntu more than Windows, actually Windows is pretty much never used on this machine and due to issues with it I am unable to use it.
View 3 Replies View RelatedI am using 10.10 on Hp pavillon PC. I cannot burn Dual layer pavillon it gives an error message and stops.
View 11 Replies View RelatedIm trying to enable the burn feature in compiz fusion so my computer can use the effects in the applications, places and systems taskbar how would I go about doing that ?
View 6 Replies View RelatedI have been trying to burn a music CD for my old Denon HI FI tried most of the burners looked for codecs nothing seems to work or play!
I had no problems with Nero on XP.
this dam program was working fine till I received some updates.why would we update if it just makes things worse the list of thing wrong with this os is growing like not being able to burn an iso without downloading gnome baker. video is just **** and gets worse with every xorg update pulse is like the old cereal commercial snap crackle and pop usb mounting problems to no end never ming trying to burn a Decent dvd now that I vented lol does anyone know of a fix for aramok crashing all the time while playing a song.this only started after I got some updates
I'll tell you one thing the guy who started that thread asking way we have not switched from windows yet should be hung by his gonads for sure like there is ever any chance of replacing windows with errors like this funny this is only a few the list marches on it get s bigger never smaller.The iso burning problem has been around for years now. thats all I can say is there should be a lot of **** flying upstream at xorg pulse and everyone else there work of late sucks as far as bug corrections and proper driver support
I know it 's not fedora is mostly upstream but don't we think its time for someone to say something about this garbage flowing down to us Any how if anyone knows how to get arormoko stop crashing every song. I find they work great when the first come out then the updates hit and it time to dump it for something newer
I am not able to burn audio CDs with Brasero 2.30.1, which uses cdrdao 1.2.3 However, Opensuse 11.3 comes with cdrdao 1.2.2 I don't feel comfortable replacing the version myself. Is there any plans to update cdrdao for Opensuse any time soon? PS: I am running Gnome in Opensuse 11.3
View 2 Replies View RelatedFor the longest I have been unable to burn an audio CD that contains ogg files with GnomeBaker, and have always had to decode to wav manually. Well I'm tired of doing that, so want to get to the bottom of the problem. Upon adding an ogg file to the file list, the error I receive is:
"The plugin to handle a file of type audio/ogg is not installed." I have all the gstreamer0.10-plugins-[base|bad|good|ugly] packages installed. I can play an .ogg file with rhythmbox.
Using gconf-editor, /system/gstreamer/0.10/audio/profiles/cdlossy is "active" and the cdlossy profile is listed in /system/gstreamer/0.10/audio/global/profile_list At a loss on what I need to do.
Applied the Lucid Lynx 10.04 over the weekend.
Since then - I am unable to burn DVDs, although I can successfully read DVD's.
Everything worked fine before the upgrade.
Under Lucid Lynx I am able to burn CD's (both data files and .ISO) so it isn't the hardware.
I have tried Brasero and k3b as burners - they issue messages that the burner doesn't like the medium, which is standard DVD-R.
Bear in mind that I could burn similar DVDs *before* the upgrade...
Any help or suggestions on how to fix this please?
I want to burn a mp3 cd but brasero can't burn mp3 cd. How can I do this. If any further software need burn mp3 cd
View 3 Replies View RelatedI've tried a whole bunch of thigns but things keep crashing and i dunno what to do, I'm using FC14 really i just wanna do it all from the terminal but i dunno what commands or yum installs to use ive been trying for a couple days.I have .avi and i wanna burn them to play on a dvd player.
View 2 Replies View RelatedI have never burned a DVD to be used on a Linux box before. If I am burning a CD using a Windows program (not built-in burning), is there anything special I need to be aware of to make sure the DVD will be able to be read on Linux?
View 2 Replies View RelatedI'm eventually going to download an ISO via wget on a command line Ubuntu Lucid. How would I burn the image to the disc?
View 1 Replies View RelatedI have just installed Ubuntu 10.04 onto my Compaq Evo N1020v (quite old laptop) The installation seemed to install without any problems and all updates have been done in update manager. Ubuntu is the only operating system on the laptop. My problem is, neither of the file burning apps Brasero Disk Burner or Send to CD/DVD will detect my blank DVD's. Both apps detect the blank CD's without a problem. File browser is able to read data on this DVD type in fact I installed Ubuntu from a DVD of this type.
View 2 Replies View RelatedI've tried numerous times and different ISO's but I cannot seem to burn ISO's to CD+RW. I'm using Braseo CD Burner. All it does is make the disc have 0 bytes remaining and it acts as if it is a CD-R/CD+R
View 9 Replies View RelatedI have a dual boot system on a box with 3.6 ghz cpu, 4 gigs memory and 3/4 terrabyte hds. I cannot get a CD/DVD to burn using Brasero. Here is the log: Well here is the last part of the log. for some reason the forum software would not let me put it all in:
[Code]...
I have Ubuntu 11.04 with all updates installed.
I can not burn any cd / dvd with Braseo, GnomeBaker, nautilus burner, etc.
The discs are "apparently" normally recorded
But then Ubuntu or DVDPlayer does not recognize the DVD or CD I burned.
Conclusion: Waste DVDs because they are unusable and I can not record.
I have a Gateway nv-53 laptop.
P.D: In older Ubuntu editions, Fedora 15, etc, I can burn disc perfectly.
I want to burn some Ubuntu iso to pass to my my friends . I am myself new to Ubuntu . How to burn an iso image to cd with k3b and where to adjust speed to minimum .
View 2 Replies View RelatedI have a DVD burner in an external USB enclosure. It works fine for reading CDs and DVDs, and for burning DVD-R and CD-R discs, but I can't get it to write to any CD-RW discs, and rarely DVD-RW. (The DVD-RW has worked maybe 3 or 4 times out of dozens of attempts, and only using K3B) I have also had the same problem burning CD-RWs in a CD burner in a different USB enclosure. Brasero almost always displays 'No disc available' if a rewriteable disc is in the drive - sometimes after a couple of minutes it will display the correct volume label, but if I try to write to it, either blanking it or writing files to it, it goes back to displaying the 'No disc available' again.
K3B finds the disk and displays the volume label without any problem, but when I try to write to it K3B complains that it can't unmount the volume and fails, then ejects the disc. Gnome CD Master can't even find the burner regardless of the disk type! I'm baffled as to why this would be happening like this. All I can think of is that it's either an obscure permissions issue, or a USB issue. I have given myself every remotely relevant permission I can think of, but maybe there's some other security setting I don't know about.
The drive and mounted disc usually show up in file managers, but I have noticed that sometimes the drive will suddenly disappear from the mounted drive list, and become unresponsive. The only thing that gets the drive working again is to reboot the computer - just switching the drive off and back on again doesn't fix it - so I suspect maybe my Mint 9 installation (Gnome with KDE additions, but the problem has existed since I first installed it as pure Gnome) has some issues with the USB connections, but that's just a wild guess, and I've never had a problem using USB flash drives. I have used a variety of disc brands with no difference. Dare I say it, but Windows has no problems with any of this - any of these discs can be read, written, blanked and rewritten effortlessly in Windows. Sigh. At the risk of providing too much information I'm going to follow the advice from the Linux Mint forum, and include outputs for lsusb and lspci.
lsusb output:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code].....
I was attempting to burn an .iso using dd, I had used it before and remembered it being quite simple.
However I tried it today with:
I noticed it finished very quickly and now the cdr1 file inside /dev is six hundred megs or so. I don't think I can get the old file back so am wondering if I will need to reinstall, or if I should delete that file maybe it will rebuild on start up?
Should have I used another terminal command for burning .iso's to disk? What might the correct command be?
I decided to install for my first Linux " Linux XP. It really looked a cool setup. But when I tried to burn the iso it was to large at 4.47 to burn.
View 14 Replies View RelatedI installed Squeeze without a DE. Then I installed gdm and rhythmbox, but rhythmbox won't even react to the Create CD button. I have the brasero-cdrkit and cdrdao packages installed for brasero to burn audio CD's which works perfectly. I have the rhythmbox-plugin-cdrecorder package installed too, but no go. The CD spins up, but no dialogs at all from rhythmbox
View 8 Replies View Related