OpenSUSE :: Unable To Burn CD-RW In K3b?
Dec 14, 2008
I'm unable to burn CD-RW in K3b (error message "cdrecord has no permission to open the device"). Apparently, this is a wide-spread problem and there are a lot of posts on the internet that deal with it, but none of the advice I've found has worked so far.
I've tried the following:
(1) Updated K3b to the most recent version.
(2) Checked the device name of my CD burner (= sr0), and made sure I have access to it (sr0 is assigned to the group "drive", and I've added myself to this group, and also to "cdrom", just to be sure).
(3) Checked whether I have access to the applications /usr/bin/cdrecord, /usr/bin/wodim, and /usr/bin/cdrdao. Set the permissions to 775 (rwxrwxrx) and the ownership/group ownership to root/disk.
[Code]...
View 3 Replies
ADVERTISEMENT
Nov 18, 2009
I have a new install of OpenSUSE 11.2 and am unable to burn CD's or DVD's. I am running Gnome, but have tried both Brasero and K3B. Have ensured that the user I am logged in as is a member of the 'cdrom' group, and have cross checked the permissions on files and devices such as /dev/sr0, /usr/bin/wodim etc. Have also attempted to burn as root with no success.
[Code]...
View 9 Replies
View Related
Dec 9, 2010
I am not able to burn audio CDs with Brasero 2.30.1, which uses cdrdao 1.2.3 However, Opensuse 11.3 comes with cdrdao 1.2.2 I don't feel comfortable replacing the version myself. Is there any plans to update cdrdao for Opensuse any time soon? PS: I am running Gnome in Opensuse 11.3
View 2 Replies
View Related
Jun 20, 2009
I'm getting following error "There was an error writing to the disc: Unhandled error, aborting"
1. I write click file I want to write to DVD
2. select Write to disk
3. select Write
I'm using Fedora 10.I tried three different brands of DVD+R.I was able to burn same DVD+R few months back in the F10..but I did not try recent months.
View 5 Replies
View Related
Jun 11, 2010
I feel really stupid here. I've looked around but no fix I can figure out. I downloaded a i386 iso of Ubuntu to install on my daughter's laptop and I can't get the CD/DVD Creator on my main computer to burn it to either CD or DVD.
I *know* I've done it before but maybe that was on Jaunty not Lucid which I have on my computer now.
I can load the iso file into CD/DVD Creator and when I get to the "Write to disc" option it says: "Write disc to: FILE IMAGE" and there is no option to write it to my CD/DVD drive. It's as if the DVD writer is not mounted.
EDIT: The md5 checksum is fine, by the way..
View 8 Replies
View Related
Apr 25, 2011
m using this command to burn the image of ubuntu....sudo mkisofs -b boot/grub/stage2_eltorito -no-emul-boot -boot-load-size 4 -boot-info-table -V "Custom Live CD" -cache-inodes -r -J -l -o ~/live-cd.iso $CDI: -input-charset not specified, using utf-8 (detected in locale settings)genisoimage: Missing pathspec.Usage: genisoimage [options] -o file directory ...Can someone tell how to workaround this error? em so close
View 5 Replies
View Related
Jun 18, 2010
I have ubuntu 10.4 installed, everything works on my Toshiba A200-TJ9 laptop except for the built in webcam and mic, as well as the DVD burning function of my multi drive.The drive itself is a HD-DVD Rom with CD/DVD +/- R/RW capabilities.I did a $sudo cdrecord -scanbus and it shows:
scsibus0:
0,0,0 0)'Toshiba' "DVDW/HD TS-L802A" "TO35" Removable CD-ROM
0,1,0 1)*
0,2,0 2)*[code]...
Beyond that i know absolutely nothing, and when i put in a blank CD or DVD -R, it shows up as a blank CD/DVD-R, but its properties show as 0 bytes used, 0 bytes free and 0 bytes for capacity. And not surprisingly, Brasero says not enough disc capacity when i try to burn a 2.7 gig file onto the DVD-R.
View 5 Replies
View Related
Aug 21, 2010
I'm running Lucid Lynx and have been trying to burn an MP3 file to a CD-R so I could listen to it in my car. I've tried Brasero, CD/DVD creator, KB3, GnomeBaker, and VLC, and all of them failed in one way or another. Since Brasero comes stock and people have more experience with that one, I think I might describe the troubles with it.
What happens is that it doesn't seem to recognize the blank medium inserted. I open a project (either Audio CD or Data CD), add the files I want to burn. Then it says, "Please insert a writable CD or DVD if you do not want to write to an image file." I insert a blank CD-R, and it spins it, but nothing changes. The pulldown at the bottom still only gives me the choice of writing an image file. No recognition that the blank medium has been inserted and that that is where I want to burn the file. When I hit the
"burn" button, it opens a dialog box, asking me where I want to locate the image file it has called "brasero.cue"
Not sure how to do further troubleshooting on this.When I tried the same thing in GnomeBaker, I got an error message saying the burning has failed. Here's the log file from that:
wodim: No write mode specified.
wodim: Assuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
[Code]...
The burner works fine (as tested in Windows), and it reads CDs and DVDs no problem. I just can't get the burning to complete correctly. I have installed the restricted extras. I'm not really concerned WHICH program I use, I'd just like to be able to burn a CDs for road trips and whatnot.
View 5 Replies
View Related
Sep 4, 2010
I am unable to burn data cd's. I tried both k3b and Brasero. Both of them seems to be burning but about 70% through both say unknown error and ejects the cd. I am using cd-rw. I tried different cd's but the error is the same.
View 2 Replies
View Related
Jan 14, 2011
I can't burn a data disk through Ubuntu.I tried using the built-in disk creator, It had some kind of error saying the disk cannot be mounted. So I used Brasero instead and I got essentially the same error. When I tried to open both CD's the files appeared to be present but were all corrupt. Braso works fine for burning music CD's but I can't get it to work for data. here is the error log from Brasero:
BraseroReadom stderr: Time total: 131.474sec
BraseroReadom stderr: Read 666760.00 kB at 5071.4 kB/sec.
BraseroReadom stderr: HUP
Session error : Some files may be corrupted on the disc (brasero_burn_record brasero-burn.c:2862)
View 1 Replies
View Related
Feb 25, 2011
I am unable to obtain a blank CD-R to burn the ISO. I have it installed through WUBI but due to the size restriction to 30Gig it makes it completely useless to me. I gave my CD away that I got free from shipit and they wont let me get a new one. I have an external HD formatted to NTFS with files on it that I can't lose, they are very important. I might buy a disk later but right now my funds are tight due to bills and such. I use Ubuntu more than Windows, actually Windows is pretty much never used on this machine and due to issues with it I am unable to use it.
View 3 Replies
View Related
Jul 27, 2010
I am using 10.10 on Hp pavillon PC. I cannot burn Dual layer pavillon it gives an error message and stops.
View 11 Replies
View Related
Aug 3, 2010
Im trying to enable the burn feature in compiz fusion so my computer can use the effects in the applications, places and systems taskbar how would I go about doing that ?
View 6 Replies
View Related
Dec 16, 2010
I have been trying to burn a music CD for my old Denon HI FI tried most of the burners looked for codecs nothing seems to work or play!
I had no problems with Nero on XP.
View 7 Replies
View Related
Mar 25, 2010
this dam program was working fine till I received some updates.why would we update if it just makes things worse the list of thing wrong with this os is growing like not being able to burn an iso without downloading gnome baker. video is just **** and gets worse with every xorg update pulse is like the old cereal commercial snap crackle and pop usb mounting problems to no end never ming trying to burn a Decent dvd now that I vented lol does anyone know of a fix for aramok crashing all the time while playing a song.this only started after I got some updates
I'll tell you one thing the guy who started that thread asking way we have not switched from windows yet should be hung by his gonads for sure like there is ever any chance of replacing windows with errors like this funny this is only a few the list marches on it get s bigger never smaller.The iso burning problem has been around for years now. thats all I can say is there should be a lot of **** flying upstream at xorg pulse and everyone else there work of late sucks as far as bug corrections and proper driver support
I know it 's not fedora is mostly upstream but don't we think its time for someone to say something about this garbage flowing down to us Any how if anyone knows how to get arormoko stop crashing every song. I find they work great when the first come out then the updates hit and it time to dump it for something newer
View 9 Replies
View Related
Apr 4, 2010
For the longest I have been unable to burn an audio CD that contains ogg files with GnomeBaker, and have always had to decode to wav manually. Well I'm tired of doing that, so want to get to the bottom of the problem. Upon adding an ogg file to the file list, the error I receive is:
"The plugin to handle a file of type audio/ogg is not installed." I have all the gstreamer0.10-plugins-[base|bad|good|ugly] packages installed. I can play an .ogg file with rhythmbox.
Using gconf-editor, /system/gstreamer/0.10/audio/profiles/cdlossy is "active" and the cdlossy profile is listed in /system/gstreamer/0.10/audio/global/profile_list At a loss on what I need to do.
View 9 Replies
View Related
May 3, 2010
Applied the Lucid Lynx 10.04 over the weekend.
Since then - I am unable to burn DVDs, although I can successfully read DVD's.
Everything worked fine before the upgrade.
Under Lucid Lynx I am able to burn CD's (both data files and .ISO) so it isn't the hardware.
I have tried Brasero and k3b as burners - they issue messages that the burner doesn't like the medium, which is standard DVD-R.
Bear in mind that I could burn similar DVDs *before* the upgrade...
Any help or suggestions on how to fix this please?
View 9 Replies
View Related
Sep 17, 2010
I'm going to boot up a desktop (that has a cd burner) from a USB stick of openSUSE 11.3. Will I be able to burn an iso (that's on the desktop's harddrive) to CD, i.e. can I use the cd burner, if I've booted from a USB stick?
View 8 Replies
View Related
Apr 19, 2010
When I try to burn a data DVD with k3b it errors out telling me...
Unable to find the following files: /home/ion/.kde4/share/apps/RecentDocuments/Mon oncle d'Am+�rique (Resnais, 1980).srt.desktop
...but when I invoke (as root)...
# ls -al home/ion/.kde4/share/apps/RecentDocuments
...it retruns...
ls: cannot access home/ion/.kde4/share/apps/RecentDocuments: No such file or directory
So is k3b lying or ls?
Before you ask, fsck gave no errors. But Find files/Folders from the Application Launcher menu finds and lists it in the RecentDocuments directory as above, then tells me it is "Inaccessible". Delete does not work from GUI or CLI.
View 1 Replies
View Related
Aug 4, 2010
i use opensuse 11.3
i got problem to try to create a dvd movie with k3b...
i choose create a dvd movie, i take a avi file and move it to video_ts folder click to burn
i get this message
[Code]....
View 2 Replies
View Related
Dec 20, 2009
Downloaded the dvd ISO and am trying to burn the image but no matter what program I use the disc wont close. Any Ideas or advise. I got the program to work off of the ISO through Sun Virtualbox and like it but cant figure out how to install it to my pc
View 9 Replies
View Related
Jan 7, 2009
I recently installed OpenSuse 11.1 (i586) on a new laptop (HP 6710b) all has been going well, until I tried to burn audio CDs with K3B using .wav files in a directory in the format 01.wav 02.wav 03.wav etc. To burn the audio CDs I have been running K3B as root to avoid any potential permission issues. I now have a stack of cd 'coasters' with only one lucky success using the command line, which when the exact command was repeated failed again. I have successfully burnt 2 data DVDs using K3B, one as root the second as user, both without problem - so maybe it is not a permissions problem?
I am using K3b 1.0.5 in KDE 4.1.3. (it runs under KDE3) I have not been able to run k3bsetup � it is not part of the installation. However permissions appear correctly set-up � I also added the appropriate users to the group �disk�.
/dev/cdrom lrw-rw----root disk (just points to /dev/sr0)
/dev/sr0 -rw-rw---- root disk
/usr/bin/cdrecord lrwxr-xr-x root root (just points to /usr/bin/wodim)
/usr/bin/wodim-rwxr-xr-xroot root
K3b uses the executables in /usr/bin/x11/ which are just the same. I have not put suid on anything. I tried running cdrecord as a user, however the burn failed.I checked the .wav files and they play fine in kaffeine. I am using the same brand of blank CDs as the DVDs.I have not had the occasion to try a data CD � I've run out of blank disks for the moment.
K3b detects my DVD/CD burner as:
The system device is /dev/sr0
interfaceGeneric SCSI
Vendor HL-DT-ST
DescriptionDVDRAM GSA-T40L
FirmwareKC07
I tried burning audio CDs in both TAO and DAO mode, neither with success.
Here is an example shortened K3b output:
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
[code]....
View 3 Replies
View Related
Feb 9, 2010
I am able to burn DVDs with either Brasero or k3b, but opensuse then cannot mount them .
Those DVDs do contain the burned data since I can see it and read it on a Mac...
On openSUSE, I get the following error when inserting the DVD :
I added my user to 'disk' and 'cdrom' groups, but to no avail.
Here's the output from dmesg :
Code:
[275598.245976] Buffer I/O error on device sr0, logical block 0
[275598.246011] Buffer I/O error on device sr0, logical block 1
[275598.246039] Buffer I/O error on device sr0, logical block 2
[275598.246065] Buffer I/O error on device sr0, logical block 3
[275598.246091] Buffer I/O error on device sr0, logical block 4
[Code]....
View 7 Replies
View Related
Nov 3, 2010
Problem is with files greater than 4G onto dual layer or BD disks.mkisofs crashes. I believe the problem to be when this requires udf filesystem and disk does not get written to. As yesterday version is suse11.3 patched to date. k3b writes standard dvd disks ok. I am seeing a lot of searches saying this is because of cdrkit rather than cdrtools, can I replace this easily? Is this the case? Tried setting the k3b options when burning to udf same error. Other searches show k3b has fixed probs with these issues, so appears to point to underlying mkisofs stuff full error log in yesterdays post if it helps. I will also try on ubuntu to see if it works there
View 1 Replies
View Related
Jan 30, 2010
I downloaded a live cd iso image from factory but can't get it to burn.
Code:
laptop:/downloads # dd if=./openSUSE-KDE-LiveCD-x86_64-Build0416-Media.iso of=/dev/sr0 bs=4K
dd: opening `/dev/sr0': Read-only file system
[code]....
View 9 Replies
View Related
Jul 18, 2010
I installed K3B 2 today on opensuse 11.2, hoping that something may have been done to make it burn disks, I've had these problems since opensuse 11.0.
When I try to burn a cdrw disk it usually fails with the error that the cd drive doesn't like the disk, if I try and expensive disk I sometimes get the same error, but if it does burn successfully and I put the disk back in the drive all I've got is a blank disk which won't take a 2nd burn.
I've tried DVDRWs and as soon as I click burn K3B decides the blank disk needs formatting and this then fails and keeps failing nomatter what I do. If I choose the ignore option for the speed when formatting it seems to format the disk then it takes between 1 & 3 attempts to burn the dissk.
View 8 Replies
View Related
Dec 25, 2010
I want to burn a mp3 cd but brasero can't burn mp3 cd. How can I do this. If any further software need burn mp3 cd
View 3 Replies
View Related
May 31, 2011
I've got an iso of a bootable dvd. I can mount it and look at the files. I want to burn the iso to a new bootable DVD except I don't want all of the files on the original to go to the new DVD
View 3 Replies
View Related
Nov 2, 2010
I have a problem with burning some disks. I believe the problem to be when the file sizes are large. using suse 11.3 x 64 and updates done. k3b version 2.0.1-1pm 2.7 burned normal dvd yesterday with3.5 Gb + 1.5Gb files. Tried burning to BD-R disk with 11.5 Gb file. I have burned blu ray disks before with my machine but used nero, I would prefer to use k3b as should do this. I get error of mkisofs crashed and following error log
[code]...
View 3 Replies
View Related
Jul 5, 2011
I have been receiving K3b burning problems for the last two weeks. When I burn a m3u playlist generated from Banshee I receive an error about not having permission, but I believe I've enabled all the permissions I know how. Just now I attempted to burn a downloaded ISO and received an error even though I think the filesystem may have built correctly:
Code: cdrecord returned an unknown error (code 254). Sometimes using TAO writing mode solves this issue.
here's my debug report: SUSE Paste
View 9 Replies
View Related
