I download and burnt Ubuntu 10.04 and trying to run the Live CD. It shows up black screen after displaying the red progress dots and nothing happens after that. No CD drive activity is noticed. How can I resolve this problem? I have been troubleshooting it for days!
View 9 RepliesIm having a serious issue with booting ubuntu 10.04, the issue being it wont boot up at all, after working so well for so long (i suspect some recent dodgy system updates are responsible) so I decided to just reinstall ubuntu from scratch again but wanted to retrieve some important files from my root device. So I am running the live desktop and I can see my previous filesystems under places but cannot mount or open my original root device where the files I want to recover are located, I receive this error msg:"Unable to mount 77 GB Filesystem.
View 2 Replies View RelatedI have installed Ubuntu 9.04 fom a Live CD. My system is a Dell Optiplex 745 that originally had Windows XP installed. Ubuntu is the only OS. Windows XP was removed.
The sytem appears to be running normaly.
When I shutdown (not restart) and then power cycle the computer, I see the Dell splash screen then I get the message: "Errorauto-sensing secondary master hard disk drive. Strike F! key to continue, F2 to run the setup." F1 repeats the message. F2 enters the BIOS setup but does not lead to a fix.
If I place the Live CD in the tray and boot from that, I get to the Ubunt install directory.
If I click "Check disc for defects", then run the check. (I can even interupt the check without completing by hitting ESC), then the system reboots.
I see the Dell Splashscreen.
I see the Ubuntu Live CD menu
I choose "Boot from first hard disk"
Then Ubuntu loads perfectly. I enter my username's passord.
The system runs fine until the next time I shutdown.
How do I get the system to boot directly without needing the LiveCD?
I am unable to boot 9.10 or 10.04 Live CDs.9.04 can boot.When attempting to boot the LiveCD/USB (I have tried both), if I attempt the basic install/start/check CD, I get a blank screen.If I use the option selection to set nomode(something) command (I will verify later, posting from work) with verbose and quiet disabled, I can get further, but can still not boot.Any ideas as to how to get a boot of of the LiveCD?
View 4 Replies View RelatedI've been dual booting 10.10(with Windows7) for about a month. Today is the first time I've encountered a serious problem.
This morning, nothing functioned properly after trying to open up several programs. The computer seemed to be "frozen", although the mouse was working fine.
I decided to reboot, but then encountered an even bigger problem. It failed to boot and got this message code...
I have a serious problem! I downloaded and burnt Ubuntu 10.04 and then chose it as start up volume in Snow Leopard's start up disk preference dialogue and although Ubuntu runs successfully from the cd (I'm typing from it now) I can no longer boot into OS X at all.
I have tried all of the different short cuts at boot up to no avail, even trying 2 keyboards. It insists on looking for the Ubuntu disk and if it is not in the drive comes up with an error message stating that a system disk cannot be found.
Is there any kind of tool on Ubuntu that will let me change the start up disc/interact with the Mac's efi settings? I previously had refit installed but this disappeared just before I booted the cd, is it worth using the live cd?
I tried booting from a Tiger dvd but it wouldn't let me do so, it just returned me to the ominous "System disk not found" message.
Does anyone have any kind of idea? Perhaps some kind of shell script that will reinstall refit? I'm guessing that any kind of dvd designed for PC will prob boot, any kind of OS X recovery disk compatible with MBR available?
On a Lenovo thinkpad S12 2959 and a kingston DataTraveler 101 OK I have been having a lot of strange issues while trying to install the current 10.10 netbook version of Ubuntu.I followed the instructions right below the download for the iso.Basically download the usb live creator and use it.So I did (with no persistence set) and it seemed to work.I tried booting from it and it worked, except that I have to keep pressing keys, I used the enter key and it worked.If I stop pressing enter no progress is made.Then at the end their is some error about no persistent space being available.
and now it is booted, so I try to install a driver and it hangs.so I try to install the OS, and it hangs.So I try to exit and it finally gets to the next screen in the installation after I tell it to exit, but then hangs when trying to get the the next one and it will not continue.
Tinkered with partitions. Grub is now messed up. Unable to boot from live CD in the normal manner of just hitting f9. Want to boot from live CD. Dual booting Win7 and Ubuntu 11.04 64bit.
View 7 Replies View RelatedA few weeks ago I installed Fedora Linux 64-bit on my HP dv4-1428ca laptop which was running Windows 7. At that time I created a Live USB using the fedora-live usb tool and it booted fine. A couple days ago I decided to try out openSUSE, so I downloaded the 64-bit live-cd image and tried to create a live usb using the SUSEStudio ImageWrite provided in the documentation. The tool kept giving me an error message, so I decided to try unetbootin instead. However, when I tried to boot the live usb on my HP laptop, it presented me with the message.
"SYSLINUX 4.04 EDD 2011-04-18 COPYRIGHT (C) 1994-2011 H. PETER ANVIN ET AL" with a blinking cursor and nothing else. I've tried a variety of alternative programs for creating live USB's (pendrivelinux, linux live usb creator, unebootin), and verified the checksum of the iso file for openSUSE 11.4 64-bit, and still was not able to get past the "SYSLINUX..." message on my HP laptop. However, the live USB does boot on the other computers in my house. Interestingly, if I create a live USB using the tool provided by Fedora, it will boot fine. However the Fedora Live USB tool cannot be used for other distros.
Specs:
AMD Turion X2 Dual Core
4GB Ram
ATI Radeon 3200 Graphics
320 GB Hard Drive
I had mandriva 2009 installed in my system everything was fine till I installed a new graphics card xfx nvidia gts250. My motherboard in Intel 946giz. I was able to change it to lenny with got installed perfectly but when I boot in linux it goes into an infinite loop giving me call trace and all I tried sabayon 4 and suse11. 1 live cds but was not able to boot into their live cd environment.
View 5 Replies View RelatedIm new to linux. Im trying to install 11.4 on my desktop. When i try to run the live CD (GNOME) .. after loading the kernel, the screen with just a progressbar appears and the screen crashes, as in some parts of it goes black.. Although, i can install it perfectly, when the OS boots the same kinda screen appears and crashes My system config- intel i7-870 4 core 4GB RAM nVidia GeForce 9800GT 1GB i need to get rid of windows fast.
View 9 Replies View RelatedI cannot install Kubuntu (or Unbuntu) 10.4 on my husband's computer. I have spent 5 hours on this and cannot get anywhere. I am deeply frustrated. The iso I burned to CD is good (works on 2 other computers). His computer will not boot from USB, no matter what I do to the drive order in BIOS. After loading the blue screen with the Kubuntu logo on it (and the blue-white dots), the screen changes to black and shows the following text:
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) (initrafs) Unable to find a medium containing a live file system.
He really needs to get rid of WinXP. Kubuntu is what I have on my computer (and love it!). Here is some info about his computer:
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
[code]....
My laptop can't boot from cdrom becouse it is broken and it can't boot from USB becouse it has never been able. Ubuntu 8.10 now run in my laptop withgrub 1.I've just try the following trick.1) I put grub4dos in /boot2) I put iso image in /boot3) I add the follwing entrt in source.list
Code:
# =========== GRUB4GOS ===================================
title == Use grub4dos for the following entries: ==
[code]....
i do software (learn keyboard) for blind people. I selected ubuntu and festival and TTS. Please i NEED (mandatory for disabled people) live cd what can be inserted into cdrom and everything is done - automatic boot, settings done, software is on start-up... created own distribution, programed software, done settings, but what kills me is : How i can run AUTOMATIC (without asking, no enter) boot from CD-ROOM. Now CD asking :
- 1) What language want you (here is only czech) - need ENTER (killer for disabled people)
- 2) Boot from CD or hdd - need ENTER (killer no. 2 for disabeld people)
- after 2) I m ok, i can handle it myself, works.
I edited file in isolinux menu.lst etc - I can edit text but i do not know how run defalut choice automaticly. timout 0 does not work I spent a lot of hours reading tutorials grub/isolinux and have nothing ...
From the following link I have downloaded "Ubuntu 11.04 desktop i386" in rar form but when I unrar it I cannot find the ISO file to create a Live CD as the only one that can be burned with Nero is the rar file stated above.Or else wubi.exe or USB creator .exe.
View 9 Replies View RelatedI was trying to install ubuntu on my old IBM desktop. but it is just hanging not continuing the installation. desktop has p4 processor, 2.8 Ghz, and 2.5 gb ram. I can run ubuntu from usb but could not install
View 9 Replies View RelatedI�ve been trying since a week or so just simply install the last version of Ubuntu 10 and the Ubuntu 9, but without success. I could not even start with a live CD. I even created a USB a start from there but same situation. The facts are that, ubuntu Cd or USB loads, it shows menu and let me select install or try ubuntu, then starts processing. and then gets stuck with a blank screen ( dark, actually ) I try to find in the F4 option to start with "safe graphics mode" but this option is not there.
View 5 Replies View RelatedI have downloaded 64bit desktop CD Iso installer form ubuntu site. when i boot the live CD, i get the first black screen of keyboard and man symbols at the bottom. then the ubuntu splash screen and it is stuck there for ever. also my HDD activity is over since no CD derive blinks and HDD led blinks. if i press CTRL+ALT+backspace i get a text screen with several error messes most of them input output error and errors like unable to create /tmp. I will attach a pic shortly..
View 4 Replies View RelatedAs stated in an earlier post, I attempted to see if my linksys wusb100 adapter would work out of the box using linux 9.10. I currently have ubuntu 8.04 and have not gotten it to work on 8.04 either.
View 1 Replies View RelatedI downloaded another distro But I am unable to play inside linux. When I insert the Iso CD nothing happen. Do I have have to boot from CD? My present OS is ultimate edition.
View 3 Replies View RelatedI recently got new hard drives for more space and copied all my old drives onto this one (everything mirrored, no problems)The thing is, when I first setup my Ubuntu, I only allotted like 20GB because of space.Now that I have new hard drives, I wanted to give it more space, roughly double it to 50gb.The problem is, I am unable to resize it.I have booted into the Ubuntu Live CD, and started Gparted. I see all my stuff there, including the unallocated space next to my ubuntu partition (I left it so i could fill it when I expanded the partition)
The problem is, I am unable to make it larger. I right click, click on resize/move, but when I do, it just shows that I'm at my maximum size for that partition, I can only shrink it.so my question is, how in the world can I extend that partition into the unallocated space?I've tried formatting the unallocated space to ext3 to try and merge it, no success.I tried moving my ubuntu partition all the way to the right (end of the disk) so maybe I could extend it to the left, nothing
I've installed Ubuntu 11.04 on a desktop and am trying to install ndiswrapper. I don't have a wired connection to the router, but I have managed to use ndiswrapper successfully on other Linux live distributions which already had them installed (eg, Linux Mint 9). By inserting the Ubuntu 11.04 Live Cd and adding the cdrom in Synaptic's "Settings > Repositories" menu, I can find it in the list of packages, but when I try to install ndiswrapper-utils-1.9 and ndiswrapper-common I get a few error messages. First, a notice pops up saying: "Some of the packages could not be retrieved from the server(s). Do you want to continue, ignoring these packages?". I guessed this is due to lack of an internet connection, so I selected "yes" and got an error box that reads:
"E: Internal Error, No file name for ndiswrapper-utils-1.9 W: Failed to fetch cdrom:[Ubuntu 11.04_Natty Narwhal_-Release i386 (20110427.1)]/pool/main/n/ndiswrapper/ndiswrapper-utils-1.9_1.56+r2729-1_i386.deb
Unable to stat the mount point /media/Ubuntu4011.0440i386/ - stat (2: No such file or directory)"
This system has two hard drives and a cdrom drive. I've error checked the Live cd, and it came up clean. Please, can someone give me a hand getting Ubuntu to mount the cd? PS: I've downloaded the ndiswrapper files from sourceforge onto a thumbstick (version 1.56). Is there a way I can install them from the stick?
I've got an Hitachi Deskstar 164GB IDE drive which I've somehow managed to upset while attempting to swap distros. I'm guessing its lost the MBR as I can't get a PC to see it except in the BIOS. The BIOS tells me that the primary master has 164GB, Cylinders 65535, Head 16, Precomp 0, Landing zone 65534 and Sector 255. (my understanding of that info is very limited). The PC won't boot direct from the hdd and a live Knoppix disc can't see it. Trying fdisk -l produces no list. (Naturally, I can't install another distro on it either).
View 10 Replies View Relatedbusybox v1.13.3 (ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) Enter 'help' for a list of built-in commands.
(initramfs) Unable to find a medium containing a live file system
I have verified the disk i created is valid and used it to install on my laptop.
However, now i am trying to install on a brand new system:
GIGABYTE GA-770TA-UD3 AM3 AMD 770 SATA 6Gb/s USB 3.0 ATX AMD Motherboard
AMD Phenom II X4 945 Deneb 3.0GHz 4 x 512KB L2 Cache 6MB L3 Cache Socket AM3 95W Quad-Core Processor
Western Digital WD15EARS Hardrive
After several failed attempts to install Ubuntu I installed windows XP with no problem.
I have seen several posts about re-aligning this model of hard drive for the 4k blocks.
I am having trouble both installing or even just booting the live CD. I have to interrupt the boot to give the nomodeset boot option.
Once I get the Ubuntu splash with the oscillating red and white dots for several moments, I get the Busybox with the error message "Unable to find a medium containing a live file system"
If I do a dmesg I then see a lot of sr0 errors. I have an onboard SCSI controller but no scsi devices. I am not sure if this matters.
I have even tried to run the Live CD and All I get is (initramfs) unable to find a medium containing a live file system.With out the CD in the drive I get, Try (hd0,0): EXT2.I have use of the second CD I made for a friend and I have a LIVE version running now.
View 6 Replies View Relatedcan't access internet. The up and down icon appears by the network connection (upper right hand corner). When I review connection properties, I see that the computer has a valid address, subnet, gatway, dns, etc... But it still can't connect to the internet. I can't ping external addresses either. But I can access internal addresses (local router).
View 2 Replies View RelatedI have a 4 core Sandy Bridge Win7-64 system running Parallels Desktop 4. I created a new VM with a CDROM connected to the 11.04 ISO. It perks for a little while showing some Ubuntu stuff then I get the console message "(initramfs) Unable to find a medium containing a live file system".I don't get this. It is obviously booting from the CDROM. I'm guessing it does not like the unformatted disk. Why doesn't it offer to format the disk of start the installation prcess? Is it something else?
View 1 Replies View RelatedI am as much of a noob as you could be. I have trying to install ubuntu for 2 days now, I have tryed several versions and several of mint, but I always get this message ending with 'Unable to find a medium containing a live file system' when I start the installation process from the disk.
View 2 Replies View RelatedBackground info: So I installed 11.04 32 bit and it messed my computer up therefore after trying everything I got rid of it, now I've been trying to install the 10.04 long support version from the official ubuntu website and it doesn't seem to be working. Neither the 32 bit version or the 64 bit. To convert the iso etc. etc. I used "Universal-USB-Installer-1.8.6.0" which is reccommended from the ubuntu website and it didn't work. So I tried "unetbootin-win-549" which a friend recommended to me - didn't work either.
Main problem: The menu loads up when I turn on the computer and whether I click on the install ubuntu, or try ubuntu from usb option - both go to the ubuntu screen where the dot's under "ubuntu" flash for about 2 minutes before taking me to a screen where the following message appears: Code: (initframs) unable to find a medium containing a live file system And after about 5 seconds intervals, messages similar to this appear for about 7 or 8 times:
Code: usb 1-3: device not accepting address 7. error -110 new high speed usb device using ehci_hcd and address 8 Each time they appear the parts which differ is the numbers from the text above i.e. usb 2-3....