my CRT 1080i Samsung TV has a DVI connection, and my Dell mini netbook has a VGA port, so I bought a DVI cable and a VGA-to-DVI adapter. I'm not getting anything on my TV when I plug it in to my netbook...do I have to configure anything?
View 9 RepliesI was attempting to set up my ubuntu 10.04 system to load Synergy before log in to eliminate the second keyboard and mouse on my desk using these instuctions. However, once I log in I get a quick terminal screen which flashes so quick I can't read it then I am put back to the log in screen. I'm pretty sure I just need to remove the syntax I added to the /etc/gdm/Init/Default file and the /etc/kde3/kdm/Xsetup file and redo it (with less beer). The problem is that user account was the only user account I'd ever bothered setting up on this system and I can't get logged in.
Is there another account built in that I could use or do I need to hook the HD up to a SATA - USB cable and edit the files from another machine?
how I could file share, or make the whole Hard Drive (HDD) accessible to another computer. The two other computers I have are a Toshiba Laptop with Ethernet and USB, and a iMac Intel with Firewire, USB, and Ethernet. Putting these to use along with:
Three Ethernet Cables
Two Printer Peripheral USB Cables
The Two Computers
A 2GB Flash Drive
That is all I can think of right now. I do not want to use CDs. In a way, I would like to do a network boot. So, how do I get the whole HDD visible to the others computers (either/both) and be able to write to it? I want to put Xubuntu on it, and earse the rest of the Hard Drive. The computers getting this are the iMac G3s and the eMac G4. The eMac has 256MB RAM, 40GB HDD, and a 700MHz processor. Two iMacs have 128MB RAM, 40GB HDD, and a 600MHz Processor. The other iMac is the same as the rest but has a 500MHz processor.
Can Cat5e RJ45 connector crimper be used for Cat 6 connector because I heard cat 6 connector is different from cat 5e connector and also same question for cable tester can cat5e cable tester be used for cat 6 cable?
View 1 Replies View RelatedI can't get a certain harddrive out of its mounting (screws too tight) , but I want it connected to a different computer. Is it possible to have the harddrive's powercable connected to one computer, and its SATA cable connected to another computer's motherboard? (The powercable is too short to connect it to the other computer.)
View 4 Replies View Relatedi installed mupen64plus and tried to hookup my ps3 remote with a usb cable. the program recognizes the remote but wont let me map the buttons. my pc isnt bluetooth enabled so i have to leav it hooked up to the the pc.
View 6 Replies View RelatedCan I hook up an external hard drive with windows xp on it to my new laptop which has ubuntu on it through the USB port? I have the cables... forgot in which order should I plug them though... Would save me a lot of work
View 7 Replies View Relatedi should start by saying i'm using ArtistX OS, (based on Ubuntu Karmic (9.10)) I have a cassette deck and a usb turntable that i want to use to digitize my old stuf. at first, there was no output from either device, but after much fiddelin', when i right click on the volume icon and hit sound preferences, input tab, i can see that there is now incoming signal from both devices, but no audio rendering. also, again after much try this or that, got audacity to record and playback (audibly, but i could still not hear it durring recording), but that which was rendered was not acceptable quality for archiving i havn't a clue what to try now
View 1 Replies View RelatedIs there a hook thing in the Linux DNS. What I mean here is - in Linux hooks are called when the status of the network changed - like dhclient-enter-hook, exit-hook etc - is there similar thing when a dhcp client registers itself with the DNS?
View 3 Replies View RelatedI have a Linksys Wireless-G USB Network Adapter, 2.4 GHz, 802.11g. It hooks up through USB plug, and when I originally plugged it in I got the message that ubuntu didn't support the drivers, but haven't seen it since. I'm hooked up to a LAN cable right now, and can't seem to figure out how to hook up through wireless with this device. Or I just don't know how. When I click on the network connections button on the top right corner (the two computers). I can see my Wired Internet, but no wireless. When I type lsusb in a terminal I get : (sorry I don't know how to do code blocks) So it is recognizing that it's there, but maybe I just don't know how to use it. Also, I'm running Ubuntu Release 10.04 (lucid).
View 1 Replies View RelatedI am trying to hook my qosmio laptop into my vizio tv. I am using a VGA cable and I run mandriva linux 2009.1.
Unfortunately I have no luck from here. I rebooted my computer and for the first time it offered to run drakroam, but when I accepted, nothing happened.
I want to show line numbers automatically in bash scripts (a habit of being a programmer) and when I load an emacs lisp file it works from the command below but the following command that sets up the same thing for bash scripts doesn't work. I played around with this for quite some time and couldn't find anything that would make work.This is the first time I have tried to customize emacs so it could easily be something ignorant on my part.
;; Load additional packages
(load-file "~/.elisp/whitespace.el")
(load-file "~/.elisp/setnu+.el")
[code]....
I'm running OS 11.2 with KDE4. I have to use the fglrx driver,as I could not get XBMC working with radeon or radeonhd. Well, fglrx works OK, however it does an automatic underscan on my LCD TV (connected via HDMI). So I reset this underscan to get rid of the black box around my desktop by issuing four commands in /etc/X11/xinit/xinitrc:
Code:
aticonfig --set-dispattrib=tmds2i,positionX:0
aticonfig --set-dispattrib=tmds2i,positionY:0
aticonfig --set-dispattrib=tmds2i,sizeX:1920
aticonfig --set-dispattrib=tmds2i,sizeY:1080
Obviously, xinitrc will not be called after doing a suspend2ram, but fglrx decided to get me back to underscan. So I tried to set up a hook:
Code:
#!/bin/bash
case $1 in
hibernate)
# Suspend to disk
[code]....
I get the exact same error messages, if I try to run the four aticonfig commands with "sudo -s" - however, it works, if I run them as "su".So finally coming to the question: Is a hook running with sudo privileges? Can I get it to run as "real" "su" ? Any other ideas (short of creating a hook that's logging me off, then on again?)
how to use inode hook functions(inode_alloc_security and inode_free_security)?
View 1 Replies View RelatedTwo tries at building mplayer. First time failed with no sound, second time worked fine - NO CHANGES that I know of, BUT OK - it works nicely.So if I click on a file in the Linux (fedora 14) file browser, I see using "Mplayer Media Player" as a second option, It does nothing, nor does it do anything from the Application tool menu. I do not know where the "I am doing nothing (and here is why)" error message is logged.
I can manually run mplayer or xmplayer on the .wmv file and it works.How do I edit the menus (control files?) and have them use the newly installed and working mplayer (or xmplayer??).Next, it would be nice to make mplayer the default tool to play videos in Firefox (the default for both is another tool (Movie player) which needs a plugin that I cannot find to work).And finally, if I can get one or both of these working - it would be nice to set the default to the new player instead of "Movie player".
I want to receive an icmp packet using net filter hook function. A string will be printed if an icmp packet is received.I am able to print the string. but the packet loss in the log message shows 100%packet loss.So i changer hooknum = NF_IP_FORWARD.but still its not working.I want to get log message as received 100%
View 1 Replies View RelatedIs there a way to provide post-mount and pre-umount scripts in Linux?
I am trying to do some scripts on storage media when mounted and before umounting (eg, for syncing).
Running first upgrade after installing 9.10.
Currently on item "Configuring linux-image-2.6.31-20-generic" and the progress bar/terminal readout has not changed for an hour or so I'd say.
Don't want to cause issues by killing it halfway through, especially as it presents an opportunity to learn something!
I'm tasked with creating a base image of ubuntu (one for server, one for workstation) that is locked down and has all the fluff taken out (naturally workstation will have more fluff left in it than server). Task list looks about like this:
1. Create list of deb packages "allowed", write script to list/uninstall everything else.
2. Hook the logins into either enterprise kerberos or Active Directory (yuck).
3. Write scripts to check things like setuid/setguid, disabling su, checking sudo permissions, configure iptables, etc.
4. Use a scanner to scan the system from outside the system (was thinking of using backtrace).
5. Custom-compile the kernel to strip out all the unneeded modules.
Before embarking on this awesome task I figured I'd check with you guys to see if you know of some resources that would make this task easier/quicker. I'm sure someone out there has already headed down this branch.
PS My boss *loves* ubuntu and isn't to keen on going with a deb (or other) distro that is already "security trimmed" without some serious convincing. I'm sure there are some out there, and if you want to pass along a couple for consideration, I'll check them out, but no guarantees he'll let me use it.
I have a few mail servers (CentOS 5.5) that are running OSSEC Active Response (2.5.1) on Iptables (1.3.5-5.3.el5_4.1). We are currently having a problem where we get loop hook errors:Jan 24 04:15:03 servername kernel: iptables: loop hook 1 pos 464080 00000022 this is the firewall-drop.sh we are currently using:
Code:
#!/bin/sh
# Adds an IP to the iptables drop list (if linux)
# Adds an IP to the ipfilter drop list (if solaris, freebsd or netbsd)
# Adds an IP to the ipsec drop list (if aix)
[Code]...
This is the "alert" I've received from SElinux Alert Browser after closing "rythmbox" application that opened my CreativeZen mediaplayer:
Code:
SELinux is preventing /usr/libexec/abrt-hook-ccpp from using the sys_ptrace capability
in dmesg it has:
[code]....
We are trying to implement a firewall as kernel module through netfilter hooking (in C). In the following code we are allowing only TCP traffic. Source port number and destination port number are printed for every TCP packet. On execution, this code prints wrong port numbers. This is the first time we are using skb_transport_header function for accessing tcp headers.
We verified port numbers being printed by firewall through NFS traffic. On the same machine where firewall is running, we hosted an NFS server. An NFS client (from a different system) puts a file in exported mount. Firewall is able to capture packets for this file transfer but port numbers printed are wrong. It prints '69' for source portnumber (whereas ethereal capture shows it as 790) and prints '553231' for destination port (whereas for nfs version 4 it has to be 2049).
[Code]....
Anybody recently succeded in installing GRUB2 on Mac OSX partitions? I have to compile in un Fedora/Ubuntu/Gentoo. It work, but once back in OS X, I get this error:
./grub-mkimage -d . -o grub.efi part_gpt hfsplus fat ext2 etx3 ext4 normal sh chain boot configfile linux -bash: ./grub-mkimage: cannot execute binary file
I tried to build it in Ubuntu 8.04, gentoo and Fedora Rawhide, all fail with the same error. Look like the binary compatiility between OSX and Linux is broken in Leopard. I would love to have a faster boot, it take half a minute to get to grub, using Grub2 with EFI would take 3 seconds. As I don't need bios emulation, Fedora would also run faster. Anybody have a compiled and working Grub2? Is there a better way to use Grub2 with EFI? A working one if possible
OSX: 10.5.8
Linux: Ubuntu 9.10
Mac: MacBook Pro Santa Rosa (3 years old with a Core 2 Duo 2.2ghz)
GCC: 4.2, 4.3, 4.4
I was just wondering if there is a remote address book program or if there is a way to sync abook and gmail (without any manual intervention like Contacts->Export->csv in Gmail).
View 9 Replies View RelatedIs it possible to convert the standard Ubuntu 10.10 OS to Ubuntu Netbook, so it permanently logs in as the Netbook edition?
View 2 Replies View RelatedI want to scan in a book and convert it to a pdf AND make an OCR text of it. I am looking for somebody who can help me to gie me some BASH helps to combine the pieces I have already got:
Workflow:
1. scan in the book pages: coverpage (=1), page 3, page 5, page 7 .... n (At this point the book is upside down)
2. scan in the book pages turn the book and scan from the back to the front:
back coverpage (= n-1), page n-3, page n-5 .... 2
3. run the program All scanned images are in directory scannedimages
#!/bin/bash
mkdir temppic
for i in `find scannedimages/*.png`
[code]....
how to make it, but I have no knowledge how to program it.Maybe something like that exists already and I can save the programming effort.
I was gathering some screenshots to use in a tutorial on how to do something in Unity. For the most part that went well... however I did find an unfortunate quirk.When I Right-Click any of the items in the Unity Launcher panel, and they bring up the submenu (for example I did the modification to add Pics, Docs etc to my Home Folder in the Launcher) I then cannot do a screenshot using my "PrtSc" key on my netbook. This only happens when the submenus are visible. Unfortunate because I wanted to get a screen shot of the submenus.
View 2 Replies View RelatedSuggest me the best book for learning more about directories in ubuntu filesystem
View 5 Replies View RelatedI have a netbook (samsung nc-10) with the regular 9.10 desktop installed. The screen is 1024*600, and I have a computer monitor with a resolution of 1024*768.I want to have the external monitor right of my netbook-screen, and with the 1024*768 resolution, but the hight is limited to the hight of my netbook-screen, 800*600. If I use a different hight, both screens don't work.I know its possible with kde, but i want to have it with gnome.
View 5 Replies View RelatedIs it possible to view all of the entries in an LDAP Address book at one time (ie in the address book pane) of an email client? I've tried in both Thunderbird and Outlook 2003, and I get the same behavior - the mail client can auto-complete entries, but it can't seem to list the whole address book at once.
Is there a certain structure of the LDAP tree that will grant this support? Can it be done at all? It seems to me an 'address book' that can't be browsed as a whole isn't very effective...
I should add that I'm the one who set up the LDAP server - I'm just testing various capabilities of LDAP.