i've recently installed Ubuntu 9.10, and i am trying to get java6 jre working. using "sudo apt-get install openjdk-6-jre" the package downloads and works fine until i run into this screen: Now this must look like everything is working fine....and i should just click the ' OK ' button...that is where the trouble begins...i can't....and i was hoping someone would know the problem...
View 2 RepliesI am looking for a terminal app that will allow me to save my password and maybe set up some sessions since I often log into multiple machines each day. Also is there something out there that will allow me to save common commands to a hot key?
View 1 Replies View RelatedI'm very accustomed to using gnome-terminal. Today, out of the blue, the text that shows the things like menu options is extremely small (not readable) (please see screenshot 1).
This is also the case for my favorite text editor gedit (see screenshot 2)
Does anyone know what is causing this and how I can fix it?
I know how to manipulate the size of the text IN the gnome terminal window [from usage: --zoom=ZOOMFACTOR Set the terminal's zoom factor (1.0 = normal size)] but my problem is with the text of the menu options AND --more importantly-- also of the content of gedit text editor.
upgraded to 10.04 on pangolin performance laptopset power option to never suspend or hibernate or shut down using AC or batteryhowever...the system suspends after a few minutes of idle time, requiring a password to log back on
View 4 Replies View RelatedI recently uninstalled some unnecessary libs thinking that I could work around without them. It turned out I couldn't. So I installed every single one, and it seemed like everything was working fine. But then I tried to boot, and was thrown into a low-graphics. Well I tried to boot in a low-graphics environment temporarily but it turned out X just restarted. Then I tried to reconfigure the settings, but choosing any option it threw me back into the last menu without any action being taken.
So I googled up some lines it was vomiting at me and it indeed might be my xorg not configured properly. but every time I try to reconfigure it and I look into the .conf file it turns out it is completely blank. maybe I should also note I am sporting a 64 bit bubuntu, not an NVidia though, Intel Series 4 express chipset family thing. I think it is a GMA4500MHD but not sure, what shall I do so that I don't have to reinstall my beautiful pimped out system?
Basically what the title says. I used to be able to click links in messages through checkgmail, but then I had to reinstall it and now I can no longer click links.
View 2 Replies View Relatedi'm just trying to get the sound working on my laptop I found a solution online 'Sound: add options snd-hda-intel model=dell-m6 to /etc/modprobe.d/alsa-base.conf.
View 1 Replies View RelatedI have an essential problem with Gnote. Although a word is linked it is not clickable nor underlined. Basically there is not any sign showing that the word is a link. It looks like an ordinary word. However, when I select it then "Link" button becomes enabled and if I click to that button it takes me to the linked point. I think it is a very basic problem but strangely I haven't found anything about it in my searches. Is this Gnote's normal behavior? I have Ubuntu 10.04 and had this problem in both Gnote 0.6.2. and 0.7.2 (latest release).
View 2 Replies View RelatedI am fairly new to Linux, and in the last two days, I've learned a lot! I am a LONG time heavy windows user since 1986, and have used Mac OS X at work for the last year. I feel I am a more experienced user on the Windows platform; I have programmed a short game in BASIC and C++. I have tons of games and one of my hopes is to get them working on Linux.
My problem; I have sucessfully downloaded a couple games, compiled their scipts and can play them by finding their executable and double clicking on them. i have added them to my Games menu. I downloaded a front-end for a game that is written in Python (Doomsday and Snowberry if you want to know) and have it running great! However, I would like to create some kind of clickable link in my Games menu so that it'll start up Snowberry (snowberry.py) so I don't have to keep opening a terminal and 'cd' my way to it's folder and 'python file.py'. Possible? I keep searching on google and find nothing but references to creating executable files for Windows.
In our apache web server, we have a number of virtual hosts running. I wanted to create an alias to a folder only to a specific virtual host. So what I did is, in the virtual host configuration section of that specific site, I added as below:
[Code]..
However, with this configuration,if index.html is not present in the system , I am still able to see directory listing of all files under that folder myfiles. What could be going wrong ? Why "options" directive of is not working once it is placed inside <directory > of <virtualhost>? If I move <directory> in the main httpd.conf (ie , outside virtual host section), then again it works fine. But I don't want this as I don't want other virtual hosts also to be able to access to that directory... In the main httpd.conf, I have something like
[Code]....
I am going to attempt to install Ubuntu Linux onto an 500GB USB external hard drive. I was wondering what my boot options where as i am installing on to a powermac G5 that uses open firmware. From the boot menu, i dont have the option to boot to USB(like i can from firewire, CD or Internal HD) though i have found this page;URl...this enables me to boot from usb and works fine with Mac Os X (as i had to do this to boot from a usb stick i installed the os on when doing a spot of data recovery) but i'm not sure if it would boot into linux cleanly. I'm also unsure as to wether in instalation i'd need to install yaboot or not, and if not wether this is actualy an option o n the install cd.
Any info on whether anybody had installed a similar system, had any experience installing onto open firmware for an external Usb hard drive booting system or just any general knowledge about linux on open firmware.
Before I go any further let me make it perfectly clear that this post is not in regards to Shuttleworth's recent decision to move the "titlebar buttons". I honestly don't care and in fact it saves me time since I've always moved the close button to the left side and then removed the minimize and maximize buttons anyway.This problem is made even more annoying because I thought we were all done with it. I've been back and forth between distros, KDE, and GNOME since 2000. . . I would run head first into this issue often out of nowhere. . . I feel like I'm back in 2003 again.
According to Fitt's Law, corners and edges have infinite width as far as the user is concerned, one of the reasons I have loved GNOME for so long now is because of the use of corners, so imagine my surprise when I can no longer simply throw my mouse cursor up into the corner and simply CLOSE the maximized window that I'm currently using, instead it drags the window. This is obnoxious and useless. I can already grab at any other part of the top edge of the screen outside of the far corner in order to drag a window, why is this happening again? It is SO frustrating particularly since GNOME is supposed to be so damned concerned with usability.
I think this change might have something to do with that monstrosity known as gnome-shell. I guess they were figuring that with the proposed 2.30/3.0 switch over to this new window manager, they could simply do whatever they like with metacity. . . or maybe gnome-shell USES the same configurations as metacity (seems plausible), all that I know is that this truly pisses me off.It may seem trivial but it's a daily use factor for me and I have no way of changing the behavior. I just want to be able to throw my mouse in a corner and click, it never seemed that big of an issue in the past, I don't see why the developer(s) saw the need to change this.
And to forestall all those that would ask me to switch from metacity to compiz or vice-versa, it's with both and I am NOT going to use compiz's own digusting window manager themes, I like my metacity themes.My other choices are KDE, enlightenment, openbox or Xfce, Well the first two are travesties since I'm used to my GNOME applications and they don't look good in those DE's, the third looks like crap (to me) and Xfce has corner close button functionality only per theme (some themes do and some don't)
In my desktop toolbar on the right side where my running applications are shown etc. I have some problems:
1) After a while and after some messages have been shown and applications started, there is a growing gap which gets larger. When I move the mouse over the gap, I see tooltips belonging to the application to the right which is always a different one so I assume that it is a toolbar problem and no application problem.
2) Some icons are not clickable with the left mouse button, e.g. Rhythmbox. When I left click on it, nothing happens.
3) When I open the volume control with a left click, I cannot close it by clicking somewhere else. I always have to click on the "Mixer" Button to see a whole window and then I can close it.
When I activate Compiz through the Desktop Effects settings, the top one or two pixels of the top Gnome panel don't respond to mouse clicks. Is this a bug, or do I have to adjust some CompizConfig setting?
View 6 Replies View RelatedI configuring samba under Fedora 12, i just set in samba dialog Server Settings->Security and choose guest account: apache. The account is exist io the Samba Server, now i try to login from Windows to Linux share, server asks me login and password, however when i set apache as login and not set password, server asks me login again as the password is incorrect. As i understand under guest acount can login any windows user without the password.
View 4 Replies View RelatedI'm seeing weirdness with Scottrade's main screen with Firefox (not the real-time streaming quotes app). It seems after a few minutes, whether idling or otherwise, Firefox gets into a state where nothing on the Scottrade page is clickable. Firefox menus still work as do other tabs so Firefox itself is still alive. It's as if a timer fires inside Firefox that renders the Scottrade page inert. Manually reloading the page temporarily fixes the problem. This is the only website where I've encountered this. It's particularly annoying when you're in the middle of placing a trade order and the page suddenly goes dead when you're about to submit.
System: Fedora 11 x86-64 Firefox 3.5.6 (x86-64) from Fedora Update
I thought maybe this was a problem specific to Fedora's Firefox build so I installed the FF 3.5.6 and 3.6.0 i386 from a tarball direct from Mozilla. Same results. I'd be inclined to call this a Firefox bug were it not for the fact that I do not see this behavior on my ancient Fedora 4 machine running Firefox 3.5.6 installed from the same tarball.
I am new to Ubuntu and am attempting to do a clean install on my second pc. I'm semi computer illiterate, and I am stuck on the Who are you? page. It appears that I have all the fields filled in correctly, with checks next to them all and "Fair password" displayed. I have Log in automatically checked, and I have require my password to log in as well as encrypt my home folder unchecked. I was wondering if there had been problems with this or is there something that I am doing wrong with my installation? The forward button is not clickable for some reason
View 3 Replies View RelatedI am trying to get custom options to work.
This is my Dhcpd.conf file
This shows that I have 3 custom option in RED.
Now when I try to pull an Ip from the 96.63.0.0/24 subnet I do not see the options in the DHCPACK from the server. The client gets an IP 96.63.0.12 but no options are present in the DHCPACK or any other DHCP transaction. I have confirmed this trhough tcpdumps on the server and client.
The server version I am using is:
The version of the DHCP server is :
Internet Systems Consortium DHCP Server V3.0.6-Fedora
I am going to attempt to install Linux (probably Ubuntu) onto an 500GB USB external hard drive. I was wondering what my boot options where as i am installing on to a powermac G5 that uses open firmware. From the boot menu, i dont have the option to boot to USB(like i can from firewire, CD or Internal HD) though i have found this page;[URL]... this enables me to boot from usb and works fine with Mac Os X (as i had to do this to boot from a usb stick i installed the os on when doing a spot of data recovery) but im not sure if it would boot into linux cleanly. I'm also unsure as to wether in instalation i'd need to install yaboot or not, and if not wether this is actualy an option o n the install cd.
Any info on whether anybody had installed a similar system, had any experience installing onto open firmware for an external Usb hard drive booting system or just any general knowledge about linux on open firmware would be great.
So I have the burned ubuntu CD, and I'm attempting to install it on a system that has one HDD with XP/Vista on it, and another that is completely formatted and unpartitioned. However, when I boot to the ubuntu CD, I can use the menus from the bottom, and select the language when initially prompted, but I can't select any of the menu options except for boot from first hard drive.
View 1 Replies View RelatedI am using Fedora 12. I have the following problem, when i working with system-config-samba dialog:I add the new user on the server:as following:
Unix username: vova
Windows username:test
As described in Customisation Guide for Red Hat 9: "If the user has a different username on a Windows machine and will be logging into the Samba serverfrom the Windows machine, specify that Windows username in the Windows Username field."So i logged from the Windows machine not under test(Windows username) but under vova.And i logged in without the problem. However it seems that samba should check windows username=test (as have written in samba-config) and ask an password for different users. And additionally, if samba check the currect user in Windows itself and verify it with Unix user, what for we need write the Windows username in samba config? I don't understand
I just upgraded to Fedora 15 from Fedora 14.... I think I could tolerate the new gnome shell if I could turn some of my tcl/tk and python gui scripts into things that I can store in the 'favorites' panel. In F14 I could create 'applets' ( with an Icon) that I could put in the top panel ( menu bar). Clicking on the icon would start the (gui based) script. Is there some way I can create a 'clickable' script in F15 and then place the result in the Favourites panel?
View 2 Replies View RelatedI have a question about Pidgin IM client. Is there a plugin to make links posted on status by friends clickable?
View 5 Replies View RelatedIt seems that when I adjust the volume with the volume wheel on the side of my notebook, the OS messes up. Nothing is clickable, I cannot type anything, in order to get a working computer again I have to hard reset it.Why is this happening? I have never experienced this. I have a Toshiba Satellite that I recently installed Ubuntu on.
View 5 Replies View Relatedi am getting problem with terminal.when i am open the terminal getting error(There was a problem with the command for the terminal-text was empty or contain only white space)
View 8 Replies View RelatedI am using Ubuntu for 9 months. For the first time I have encounter a problem which I have no solution. I mean In my Ubuntu terminal is not starting. What can I do?
View 8 Replies View RelatedI just recently installed Ubuntu to do some light perl development. I was installing Adobe Air and after I made the bin file executable, I could not run it with the (./). It says that there is no such file or directory. Here is the output from my terminal:
alan@workstartion:~$ cd Downloads
alan@workstartion:~/Downloads$ ls -a
. hal-9000.png
.. libflashplayer.so
AdobeAIRInstaller.bin mass-effect-normandy-sr1.jpg
[Code]....
I've deleted the .bin and re-downloaded it, I have renamed it, moved it and even tried executing it by removing the .bin and running it from its location. I am still getting the same errors.
I'm running a game called EV Nova (which runs perfectly well in WINE). I'm trying to set up a Menu item for it, but the Terminal command fails.
What works:
Right-clicking EV Nova.exe and selecting "Run with Wine Windows Program Loader"
What doesn't:
wine /home/user/.wine/drive_c/Program Files/nova/EV Nova.exe
wine "/home/user/.wine/drive_c/Program Files/nova/EV Nova.exe"
wine "C:\Program Files\nova\EV Nova.exe"
...or pretty much any other Terminal command.
I've checked under system>preferences>keyboard shortcuts, and the shortcut is enabled but not working.Is there another setting that is conflicting somewhere that i can't find?Something to do with CompizConfig settings manager? (I think but can't be sure that's when they stopped working)
View 5 Replies View RelatedI am trying to use the gedit command to edit my smb.conf file. It was originally working and all of a sudden it has stopped working. I have typed.. 'gedit /etc/samba/smb.conf' but it is a no go. I used the chmod command to set permissions as.. 'chmod 744 smb.conf' However I am still unable to get the file to open. If I do the 'more smb.conf' command I am able to read the contents of the file, however I am unable to edit them.
View 9 Replies View Related