Ubuntu :: Screen Doesn't Always Dim When Prompted For Admin Password?
Dec 8, 2010
When I go to "Software Sources..." in the Software Center, the screen dims bringing my attention to the password prompt. I find this quite aesthetically pleasing and am immediately aware that I cannot continue until I enter my password. This is the only time that the screen dims in this fashion when asking for my admin password. Is this correct? If not (or maybe even if it is), should this be considered one for the papercut ninjas?
View 1 Replies
ADVERTISEMENT
Jan 19, 2011
I have fresh install of SuSe11.2 64x My software updater applet tells me there are about 50 or so updates required. I check all and then click install, get prompted for admin password but then nothing happens except the software updater window closes and if I hover my mouse over the applet it tells me it is updating.
however hours later and nothing appears to have happened. If I click the updater applet all the selected updates still appear in the update window. I have added all the standard repos and have network connectivity. I'm a bit baffled here - it worked perfectly fine on my last 11.2 on the same machine.
View 3 Replies
View Related
Aug 30, 2010
not for the typical username and password that I use to log into my computer. It's actually prompting me, upon startup/reboot to have me insert my name and password, in what appears to be the command prompt. I am still a noob with Ubuntu and Linux in general, so I have no idea what I did to make this happen. It's not terrible and zomg if it doesn't get fixed I'll die, but it is slightly inconvenient to have to "sudo /etc/init.d/gdm start" every time I reboot my computer. Anyone know what I have to do to fix this?I would also like to apologize if this has been covered in another topic, but I could not find anything
View 6 Replies
View Related
Jun 4, 2010
I'm using Ubuntu 10.04 Lucid -- I upgraded from Ubuntu 9.10 which also had kubuntu desktop installed.After entering my username and password in the user login screen, I'm prompted for my key-ring password even though my key-ring password and my user login password are the same. How can I have key-ring password prompt automatically use the password entered at user login?
View 2 Replies
View Related
Feb 6, 2010
i'm new in ubuntu server..just installed it and i was prompted to enter my username and password..but theni got this prompt:administrator@ubuntuserver:
View 5 Replies
View Related
Dec 22, 2010
I want to run to scripts with root privileges without being prompted for a password.
This is my sudoers
Code:
# /etc/sudoers
#
# This file MUST be edited with the 'visudo' command as root.
#
# See the man page for details on how to write a sudoers file.
[Code].....
Every time I try to run SSID.sh it prompts me for the goddamn root password.
View 8 Replies
View Related
May 15, 2010
Something weird happened lately (more probably I messed something up). I don't get prompted for root password anymore, for example while installing updates or software. It's not like the system remembers the password and does everything without asking for credentials, it simply doesn't ask and states that it can't do anything because of lack of privileges.
I use GNOME and can run YaST and Software Installation - I get asked for root password when running these. I can't set privileges when doing thing's outside those, like for example installing updates through that update icon on the bottom toolbar, or trying to install something by clicking on *.rpm.What might be the cause of the problem is that I was trying out KDE lately, and because I didn't like it I uninstalled it's packages. System asked what to do with dependencies and I chose to save most of them, but I might have uninstalled a bit too much.
View 9 Replies
View Related
Jun 25, 2010
When I installed the OS, I wasn't prompted to set the root password. Is this a bug, or did my install hose up?
View 4 Replies
View Related
Apr 23, 2010
I thought these were the same password?In-fact, they WERE the same password on the set-up I currently have.But now, weirdly, I can log in fine but I the exact same password is not using in order to perform admin tasks.I've tried a recovery mode, console, and then "password (username)" in order to reset the password.This does reset the password I need to use to log in, but the password still does not work for performing admin tasks
View 4 Replies
View Related
Jan 12, 2011
Trying to figure out if there is a way to connect to a cifs share, and only being prompted for one password? ie using the following:
sudo mount -t cifs //goanna/neddy -o username=neddy,iocharset=utf8,file_mode=0777,dir_mode=0777 /mnt/neddy
prompts twice for a password (sudo & the share password). Is there anyway to "catch" the sudo password for the connect? (Long shot!
View 1 Replies
View Related
Jul 8, 2010
I installed IPlist earlier today on my main/admin account (which I only use for installing programs. I don't use this account daily.) and everything was fine. When I logged into my every day account and tried to load the program, it prompted me for my password. When I entered it, I got this message:Quote:Failed to run /usr/sbin/ipblock start_gui as user root.The underlying authorization mechanism (sudo)t allow you to run this program. Contact the system administrator.Does this mean I am not able to use this program on this account, or is there a way around it? I'm new to Ubuntu so forgive me if I'm asking the obvious. I looked around and couldn't find an answer. I really don't want to use my admin account for daily activities, but I also really want to be able to use IPlist
View 2 Replies
View Related
Feb 14, 2010
I have searched for days on this problem and no one seems to have the fix. Everyone else seems to go off on tangents.I have 3 computers. One runs XP pro, one runs Windows 7 Ultimate x64, and one runs openSUSE 11.2.The two windows machines can share files between each other with no problems.On suse I setup samba correctly. When I go to Computer -> Network on suse, I then go into Samba Shares. Then I see my workgroup name. I click to go in and I can see all 3 of my PC's listed here.When I click on my XP pro machine,am prompted for a user name and password. I put it in and I gain access perfectly.
When I click on my Windows 7 machine, I am prompted for a user name and password. I enter it in and it prompts me again for the user name and password. It will not let me in.I have changed all of the settings in 7, I have disabled the firewall, I have changed the security policies, I have changed the encryption strength.Simply Samba is nolaying well with Windows 7. I cannot believe that I am the only one with this problem
View 3 Replies
View Related
Jan 6, 2010
I've had Ubuntu installed on my desktop for a month now, and its all worked like a charm, so I'm thrilled. I then decided to install it on my old laptop as well to see if I could breath a bit more life into it, and to get used to working Ubuntu a bit more. The laptop had 18.6GB partitioned to C:// drive or windows XP, and an empty 18.6GB D:// drive, so I deleted the D:// drive in XP using the Microsoft disk utilities tool, all well and good. I then did a clean install of Ubuntu-9.10-desktop with an Ubuntu CD into the largest continuous free space, and it set it up nicely. When I first booted it up there were a ton of updates to install, as there had been on the desktop first time, which I dutifully installed. As on the desktop a little notice popped up telling me to install the NVidia Proprietary driver for the NVidia card (specifically "NVIDIA accelerated graphics driver (version 96)[Recommended]"), as it had when I installed it on the desktop, so I chose to install that and then restarted the computer.
On restarting GRUB2 loaded, and it booted Ubuntu. I then saw the little white logo on the black screen for a couple of seconds, and then the screen goes completely white, with some pixels left behind fading to white slightly slower. First time through I held down the power button to force shut down, and on restart exactly the same thing happened. This time I held down alt+sysrq and went through the R, E, I, S, U, B sequence, however as opposed to usual I didn't get a black terminal-like screen after hitting any of the buttons, although it did reboot on B. It did boot correctly in recovery mode, however I was at a loss what to do here. Incidentally, the same problem occurred when I booted to previous version of the kernel as well.
Then I decided that as I didn't have any data to lose, and it was still early in the day, I'd do a clean re-install. This time I chose to ignore the updates, and just install the NVidia driver as prompted to check that it was the driver causing the trouble. Having installed the driver and restarted I got exactly the same problem as before - definitely this pesky NVidia driver, not any of the updates.So here I am at clean install 3, having just got all the updates, but not having downloaded the NVidia driver as prompted, with little desire to go through yet more reinstalls. My questions are:
1) Do I need to install this NVidia driver? The rest of the computer specifications are fairly paltry by modern standards, and I won't be doing anything graphics intensive on it (the most graphical program will probably be Battle for Wesnoth) and I I don't need to install it, not installing it seems to be the easiest way to solve the problem.
2) If I do need to install it how would I go around doing this without getting my charming white screen?
3) Is there a way of removing the driver from recovery mode that doesn't involve a clean install again? I have tried sudo apt-get purge nvidia-driver, which tells me there isn't any installed. I have tried sudo rm /etc/X11/xorg.conf which made no difference. I have tried dpkg-reconfigure xserver-xorg and this didn't help. I have tried a couple of other commands as well but I can't remember them, however I would probably recognise them if I saw them again.
Onto System information - pulled from listed specifications and SysInfo:
General System Information
Release:Ubuntu 9.10 (karmic)
GNOME: 2.28.1 (Ubuntu 2009-11-03)
[code]....
View 1 Replies
View Related
Apr 30, 2010
Not a major issue but my Ubuntu boot screen change to the old classic Orange theme after i installed Kubuntu on a different drive and ofcourse a new Grub loader as the Kubuntu installation prompted. It can't be because of the Kubuntu installation but i can't find any other reason for that to happen.
View 3 Replies
View Related
May 17, 2011
I have built a linux image based on kernel 2.6.32.10. The image boots up fine & at the login prompt when I enter the login Id - the
system doesnt prompt for password - instead throws an error message "Login incorrect".
mygway login: admin
Login incorrect
login: root
Login incorrect
From all the search I did, I narrowed this down to be a pam configuration issue. I checked that the /etc/securetty has an entry "/dev/ttyS0" to allow root to logon via serial console - so I ruled out this file to be a cause for that error. Few files that I am not entirely sure are as below:
1) /etc/pam.d/login
sudo cat login
#%PAM-1.0
[code]....
View 5 Replies
View Related
Mar 11, 2010
I recently decided to try and change my admin password on my usual default account (the one you have to type in, in order to do sudo e.t.c im guessing)a the user account option...and having entered my previous password correctly,t will not allow me to enter a new password, it just seems to hang, (i.e the working icon appears, but having waited a minute or twwo nothing seems to of happened..(cannot press the confirm button). Is there a way to reset the password so that i can set a new one, if i cannot change my own admin password, and i was working on a windows system, i would be screaming system compromise right now, but as its ubuntu, im sure theres a perfectly innocent explantion
View 1 Replies
View Related
Apr 16, 2010
I am using Ubuntu 9.10 (along with Win xp). I have to authenticate everytime I mount filesystem (My d: , e: drives in windows). Or to connect to the internet (I use mobile broadband) I have to authenticate, also if I have to install something from synaptics I have to authenticate. I know this is good for security but I am the only person using my computer , so is there any way out of this authentication business.
View 6 Replies
View Related
Oct 3, 2010
I've tried several installs via Windows with the latest RC of Ubuntu/Kubuntu/Xubuntu/Netbook et al, and I've encountered the same problem all over: every time an admin password is required, for example to install updates or new applications, I enter it, but then, the authentication window freezes, even though I've clicked on Confirm or pressed Enter to validate the password.
View 1 Replies
View Related
Jan 10, 2011
I have a friend who just recently got an old computer from a college. The college had been shut down for maybe 6 months and decided to sell all their equipment computer ETC. In that amount of time the college had forgotten the administrator passwords for all the computers. Therefore the computer can not be updated or upgraded to the latest version of Ubuntu.Is there anyway possible to get the administrator password so that I may update upgrade and install new necessary components for the computer?
View 2 Replies
View Related
Jul 7, 2010
I need to host a user directory and home directors on a Ubuntu 10.04 box. I've installed openLDAP and I can connect a mac to it. how to install the mac schema or add users etc to it. I can view the directory in Workgroup Manager on Mac OS X Server but I also dont know how to set the admin username or password.
View 5 Replies
View Related
Jul 15, 2010
How can I avoid typing a password on every admin action? example when i install a program.
View 7 Replies
View Related
Jan 4, 2011
I set an admin password for the bios of my dell inspiron e1505 laptop. I do know the password. Is there some way for me to delete the admin password so that I can access the BIOS settings without a password?
View 9 Replies
View Related
Jul 21, 2011
I have no idea how to make a bash script but I'm trying. My bash script goes something like this:
#/bin/bash
sudo mkdir /media/5gb
sudo mount /dev/sdc3 /media/5gb
I made it executable, put in /usr/local/bin and updatedb. Then I made a launcher pointing to the bash script. The problem is, If I use the launcher, it never asks for your admin password so, the folder doesn't get created.
View 2 Replies
View Related
Nov 11, 2010
After my windows computer died of old age, I was given this computer. It has Linux Mint 9 Isadora on it. I am trying to learn how to use it. The update and other functions are locked out with a password. Is it possible to change it without reinstalling the entire Os.
View 6 Replies
View Related
Jan 25, 2011
I have created 2 in Linux.One is admin and other is Guest.But I forgot my admin password.ow to retrieve or change the admin password?
View 6 Replies
View Related
Apr 18, 2010
Yesterday after trying to remove KDE and noticing that it started removing a bunch of Gnome packages as well, I've managed to fix most of the damage. I still have one thing left. To install a .rpm package I have to do it via command line as root. If I try just double clicking it now it doesn't prompt me for the root password, then it just says, "Failed to authenticate" and doesn't finish. Also I used to be able to scale the frequency of my CPUs with the applets on the Gnome panel. When I would select a different frequency it would prompt me for the root password, then change accordingly. Now when I click it nothing happens. Can somebody tell me if there's a gconf setting or a package that was removed that could cause this?
View 2 Replies
View Related
Jan 23, 2010
I try to install my printer again after reinstall ubuntu 9.04. ("downgraded from 9.10"). Instead of asking for the local-user-login password, as it does for other system changes, it asks for a root password that I never had. What happened? How can I set this right?I made a printscreen.
View 3 Replies
View Related
Oct 18, 2010
Is there a way i can setup my computer so i can connect to my wireless network without the use of an admin password? i personally feel that it wouldn't be a security risk of any sort to not require a password to connect to an ecrypted wireless connection.
View 9 Replies
View Related
Aug 3, 2010
I just took a job and the admin password for the AFS is missing. How do I find/reset this password? I have the root password for the machine it is installed on.
View 4 Replies
View Related
Feb 26, 2010
I am not new to linux, but am to mysql. i run a website, on which i decided to put vpet, a virtual pet php thing. now in the instalation of this thing, it did not ask for an admin password. but it did come with a database. so i'm guessing the login is hidden in there. heres the question, i have phpmyadmin. how the heck do i read the database?
View 3 Replies
View Related
