Ubuntu :: No Longer Asked For Password/keyring Prompt At Start-up?
Sep 1, 2010
Been having trouble connecting to the internet and i am no longer being asked for password/keyring prompt at start-up. Something the prompt comes up 5-15 minutes after start-up.
I even manually set 'password at login' but it doesn't even ask me for that?
ps: over here
HTML Code:
https://wiki.ubuntu.com/LucidLynx/ReleaseNotes
i found something about Avahi potentially causing a conflict with network configuration - so i typed the following command and am now online at least:
sudo stop avahi-daemon
sudo sed -e '/^start/,+1s/^/#/' /etc/init/avahi-daemon.conf
When I installed Ubuntu (Lucid) on my new computer, As well as the login password I was asked for a keyring password. I gave one, but I am not sure exactly why I need this password. It seems that it was required to let me access the wifi - even though this has its own security code. I found I could stop the system asking for it every time I tried to connect to the internet using wifi by checking a button in the network setup, but when I registered for Ubuntu One, I was again asked for it - twice, once when I registered and again when I set up Tomboy notes sync. Now I get asked for it again every time I switch on.
I would like to know why the keyring passwords are needed in addition to the login password for a single user computer, which mine is and also how I can stop it asking for this password when I switch the computer on. One suggestion I have seen is to make the keyring password the same as my login password. If that is the case, then how do I change the keyring password?
Until this morning, my Wireless had always been working fine. This morning I rebooted after an Ubuntu update and now:
- I am asked twice for "enter password for keyring 'default' to unlock" whereas before I was always just asked once.
- The connection seems to be established, with the icon showing good reception and the tooltip reads "Wireless network connection 'mywifi' active: mywifi (100%)
BUT I can not connect to any website or ping the machines of my network, even by IP address. All of the other computers around (Mac, Windows) can use the Wireless as usual. My Wireless is WPA-PSK TKIP hidden SSID. My Ubuntu is 10.10 Maverick.
A while ago, I removed the Ubuntu One entry from my Startup Applications because it was annoying having to activate the keyring every time I booted up/logged on. Now, I am prompted for a password once I start Firefox (mind that it's only the first time I run Firefox after boot/login). I'm assuming it's Ubuntu One because of the sequence of events, but feel free to correct me if you think otherwise. How can I stop this?
There where some updates for 10.04.1 yesterday, after I installed them, a few hours later I restarted my machine as new headers and kernel files where downloaded.So this morning, when I come in, I wanted to check my software sources as I saw something a little odd yesterday.When I try to start that program; I am asked for my administrator password. Not the password I use for administrative tasks; which is what I am generally asked for.Anyone else seeing this? And if so, what happened. The admin account I have setup is My account, I am the only person on the machine. In the past I have entered my password and carried on; not this morning. Not sure what is happening; but I have not setup an actual admin account / password.
I'm about to turn off the prompt for a keyring password at logon following these instructions. But I wonder whether I'm going to be losing anything in the way of security. To eliminate the prompt for the keyring password, am I going to miss out on anything? In other words, just what does the keyring do? If it matters, I don't use Evolution e-mail (I just use old-fashioned web mail). To my knowledge the only passwords stored on my machine are that for my wireless network and whatever website passwords my browser stores.
Everything was working well between my Windows 7 shares and all three of my Ubuntu machines. I just replaced my buggy belkin router with a Netgear one and now none of the Ubuntu machines can open my windows box through Nautilus. All three (one 10.04, 2 10.10) can see the Windows box but when I click on it I get the never ending password prompts. My Mac can access the Windows 7 machine fine, and all three Ubuntu boxes can access the shares with CIFS/autofs. I just can't browse the available shares using Places->Network. I'm lead to believe something on Win 7 reset when I changed the router but after two days I'm at a loss as to what it could be.
When I start up my laptop that is running Ubuntu 9.10 I get a pop up window that asks me to input my password for Keyring. How can i remove this from the start up or how can I remove from having to put in my password for every time I get prompted ?
openSuSe 11.2/Pidgin 2.6.2/KDE4.3.1 Have seen various threads about this, but no real fix. Everytime I start Pidgin I get the annoying prompt to "Enter password for default keyring to unlock".
Every time I start up my PC, I am always prompted to enter my login keyring password. Is there a way to start up my computer without always having to enter my login keyring password?
I just updated to 10.10 (), but I have one problem. I changed my password a few days ago, and now whenever I log on, It comes up with the attached message, and I have to type in my OLD password to connect to wireless.
I just did a fresh install of 10.10 and whenever I log on it request the password for default keyring (the same as sign in password) in previous versions of ubuntu it never asked and automatically started the wireless; now it asks and tells me the password is incorrect. I can hit cancel a numerous amount of times and it will eventually allow me to connect, but that doesn't seem like a good fix in my opinion. This also happened when I tried out lubuntu 10.04 which I promptly removed due to the menu style.
is there a way to edit which commands require a sudo? or some programs, like the CPU frequency monitor on panel, requires a password to change. where would i start if i want to change this?
Slackware64, 13.1, Xfce: Sreensaver is configured to Lock Screen After 5 minutes. This works fine. My problem is that 90% of the time, when I go to wake the screensaver, it won't ask for a password and won't come out of screensaver. The only reliable method I have for getting the password prompt is to switch to a console and then switch back to the X session. Then, the screen saver doesn't display, it just asks for a password.
If I move the mouse when the screensaver is active, the screensaver animation freezes for ~20s and then resumes. If I touch a key (Esc, Shift, space, Enter), the animation freezes for ~30s and then resumes. I never see the Enter Password dialog. Screensaver is configured for Random. I haven't reliably gotten it to work often enough to offer any info as to when it works, but it has worked a couple of times. Keyboard and mouse are configured properly (HAL reports "Logitech Logitech USB Keyboard" for my Logitech Elite keyboard and X uses xkbrules evdev; the mouse is an MX Laser, identified as "Macintosh mouse button emulation").
Slackware64, 13.1, Xfce: Sreensaver is configured to Lock Screen After 5 minutes. This works fine. My problem is that 90% of the time, when I go to wake the screensaver, it won't ask for a password and won't come out of screensaver. The only reliable method I have for getting the password prompt is to switch to a console and then switch back to the X session. Then, the screen saver doesn't display, it just asks for a password. If I move the mouse when the screensaver is active, the screensaver animation freezes for ~20s and then resumes. If I touch a key (Esc, Shift, space, Enter), the animation freezes for ~30s and then resumes. I never see the Enter Password dialog. Screensaver is configured for Random. I haven't reliably gotten it to work often enough to offer any info as to when it works, but it has worked a couple of times.
Keyboard and mouse are configured properly (HAL reports "Logitech Logitech USB Keyboard" for my Logitech Elite keyboard and X uses xkbrules evdev; the mouse is an MX Laser, identified as "Macintosh mouse button emulation").
Downloaded Wubi on Win 7- 64 bit. ran it,a nd it asked for password. I gave it my Ubuntu account password a d it did not work. I also gave it my PC's password, it still does not work...
I have quite a few things running, and walk away from the laptop. When I return and wake up the computer, I have a period of between 10-15 seconds before a password prompt is shown. I would expect the password prompt to come up before I am able to type and do any system commands.
i use that box as a 'cruncher' it runs the BOINC client with the WCG project as a full time 'cruncher'so that kinda sucks right nowso i think the install workedbut when it restarted it asked for my user name and password (in terminal mode i think)that leads me no-whereso before i did this upgrade i swapped out my GPUsi pulled out my 8800GT and put i back in my main rigand put a 4550 in its placeit started an ran in safe modecould i just simple be over looking the face that 10.10 cant use the 4550 and all i have to do issudo appget the drivers for it to get up and running again?
I ran zypper in vm-install the other day and build them dependencies with zypper si vm-install.After that tried running 'Create Virtual Machines', asked me for root password, then goes blank.What else am I missing here?Box: openSUSE 11.2 | GNOME 2.28.2 | Acer RS740DVF | AMD64 X2 5600+ | Radeon HD4670 | 3GB RAM
Whenever I boot up my computer, Ubuntu (10.4) brings me to my desktop, then immediately displays a prompt to enter my login keyring. After some searching on the forums, it appears that this is because I set my laptop to auto-login. Am I missing something here, but what does auto-login have to do the the keyring? Why do I even need to enter that password? I understand that many Ubuntu users are picky about security, but why isn't their any option to disable this? It's almost as bad as UAC from Vista, which is one of the reasons I'm dual-booting Ubuntu in the first place. This is an annoying "problem" that has been bugging me since I first installed Ubuntu - how can I change it?
I am working on a Dell Inspiron 9400 with 9.10 installed and (thus far) working quite well. However, when I type in a command into Terminal (I was trying to install Amarok), the terminal asks for my password and the entire keyboard stops working. As in, I can hit any numerical or letter key, and nothing happens in the terminal but the blinking cursor. The specific command was "sudo apt-get install amarok", and then it asks for my password, and I'm not able to make an entry.
I've tried changing to a couple of the different Dell laptop keyboards in System>Preferences, but again, before typing the command into the terminal, everything is working fine (inside AND outside of the terminal). After the password prompt comes up and the keyboard stops working in terminal, all the character keys still work fine still outside of the terminal.
I have an intranet server behind a NAT router. Very standard linksys router home setup. The server has a static IP. I used port forwarding in the router to use SSH and log into the server remotely - it works OK.
I want no one outside my home network to access any webpages on the server unless they're authenticated.. I know I could port forward like with ssh but with http port 80 and then see webpages , but again this would open it up to anyone with my cable modem's IP - wouldn't it?
I need a secure way like SSH that requires a password before anyone could access port 80 and http from the server from a remote network.
How do I do this? And on the local network people can get served pages normally as usual. Just remote would need authentication. Must be commonly done(?)
i changed my password and whenever i log in i get a message that ur login keyring password and user password do not match, so how do i change my login keyring password!!
everytime i try to vnc to my box, it pops up the keyring authentication, which is obviously a huge problem when logging in remotely.how do i change my keyring password to match my login password?
I have a brand new install.I was doing some housekeeping and made a more sure password.Something went wonky and I got locked out.So I booted to root and changed the password.I'm back in the box now.But, my keyring password no longer matches my user password.So every time I want to do something I am asked for my old password.How do I change my keyring password to match my login password?
I am getting a prompt namely unlock keyring when i start up my PC and when i type in my password my wireless gets connected automatically... I didnt have this issue before.. My wireless onnection used to start up automatically when i start my PC...
