Ubuntu Security :: Keyring Password - Why And How To Stop Being Asked For It?
Sep 28, 2010
When I installed Ubuntu (Lucid) on my new computer, As well as the login password I was asked for a keyring password. I gave one, but I am not sure exactly why I need this password. It seems that it was required to let me access the wifi - even though this has its own security code. I found I could stop the system asking for it every time I tried to connect to the internet using wifi by checking a button in the network setup, but when I registered for Ubuntu One, I was again asked for it - twice, once when I registered and again when I set up Tomboy notes sync. Now I get asked for it again every time I switch on.
I would like to know why the keyring passwords are needed in addition to the login password for a single user computer, which mine is and also how I can stop it asking for this password when I switch the computer on. One suggestion I have seen is to make the keyring password the same as my login password. If that is the case, then how do I change the keyring password?
View 9 Replies
ADVERTISEMENT
Sep 1, 2010
Been having trouble connecting to the internet and i am no longer being asked for password/keyring prompt at start-up. Something the prompt comes up 5-15 minutes after start-up.
I even manually set 'password at login' but it doesn't even ask me for that?
ps: over here
HTML Code:
https://wiki.ubuntu.com/LucidLynx/ReleaseNotes
i found something about Avahi potentially causing a conflict with network configuration - so i typed the following command and am now online at least:
sudo stop avahi-daemon
sudo sed -e '/^start/,+1s/^/#/' /etc/init/avahi-daemon.conf
View 1 Replies
View Related
Dec 15, 2010
Until this morning, my Wireless had always been working fine. This morning I rebooted after an Ubuntu update and now:
- I am asked twice for "enter password for keyring 'default' to unlock" whereas before I was always just asked once.
- The connection seems to be established, with the icon showing good reception and the tooltip reads "Wireless network connection 'mywifi' active: mywifi (100%)
BUT I can not connect to any website or ping the machines of my network, even by IP address. All of the other computers around (Mac, Windows) can use the Wireless as usual. My Wireless is WPA-PSK TKIP hidden SSID. My Ubuntu is 10.10 Maverick.
View 2 Replies
View Related
Jul 6, 2010
I often want to have mythtv running on one display while I continue with work on the main display, as I CAN chew gum and walk at the same time. When the task is administrative, such as running update manager, I am asked for my password so Ubuntu (10.04 amd64) can authenticate me as an administrator. Good, but I think I would like it not to freeze the desktop, including the mythtv, while it does so. Is there a good reason not to want that? If not, can it be done (avoid freeze when authenticating) and if so, how?
View 1 Replies
View Related
Dec 3, 2010
I have quite a few things running, and walk away from the laptop. When I return and wake up the computer, I have a period of between 10-15 seconds before a password prompt is shown. I would expect the password prompt to come up before I am able to type and do any system commands.
View 2 Replies
View Related
Jun 14, 2011
everytime i try to vnc to my box, it pops up the keyring authentication, which is obviously a huge problem when logging in remotely.how do i change my keyring password to match my login password?
View 4 Replies
View Related
May 4, 2010
I have Lucid working nicely now, and I've started using Gwibber, which seems to try to connect at login. The only problem is that I'm immediately asked for the login keyring password (which happens to be the same exact password I just entered to log into the machine). This happens every time I boot the machine.
Is there any way to make it stop asking me for this login keyring password? I just don't get why I have to enter the same password twice.
The message is:
Code:
The login keyring did not get unlocked when you logged into your computer.
View 9 Replies
View Related
Nov 14, 2009
how can i solve a small little problem: Every time i start opensuse 11.2 i get a window asking me to input the keyring password... this started to happen after i installed Pidgin. how can i stop the keyring from asking me the password everytime??? how can i even get to this "keyring"??
View 9 Replies
View Related
Dec 21, 2010
Every time I log in, I get the "password for keyring default" question two or three times, unless I enter it immediately as it pops up, sometimes even that doesn't prevent it from respawning. What could be causing this? I'm using Maverick.
P.S. Hmm, I don't think I'll be watching the lunar eclipse much now, the sky is covered with smoke, maybe it's lunar apocalypse.
View 3 Replies
View Related
Jun 15, 2010
I just reinstalled ubuntu lucid after accidentally damaging it, And I used all the same passwords and user names as before, I can login fine, and I can do sudo commands, but the gnome keyring wont accept my password, I tried changing my password using Applications>accessories>Passwords and encryption but that didn't work. How can I fix this so that keyring will accept my password, I need it to save my wireless router password.
View 1 Replies
View Related
Sep 3, 2010
I would like to use a wireless network, I type in the correct password but suddenly a new window pops up saying: 'an application wants to access to the keyring 'Vorgabe', but its is locked password:'
But I don't know what password it's talking about
I went to Password and Encryption keys, there are two folders
'password: vorgabe'
'Password: login'
View 9 Replies
View Related
Aug 14, 2010
How to remove keyring that is asked when the computer wants to connect to the wireless?
View 1 Replies
View Related
Jan 18, 2010
I have a standard home set-up for my Ubuntu OS, and I would like to know whether its possible to cut out the repetitive prompts to enter the password, as when you connect to the internet or access files on a partition that's not home, or install new software.
View 1 Replies
View Related
Aug 25, 2010
I just changed my password now every time I start my computer the keyring wants my old password and it keeps doing weird things even after I type it in. Like Ubuntu will say No keyring found or something to that effect anyway.
View 4 Replies
View Related
Mar 9, 2011
After installing ubuntu 10.10 on pc i had it running fine for roughly 2 weeks. i have selected automatic login so i do not need to mess about logging in etc, but recently my pc asks for my password to unlock keyring once it shows my desktop.
View 2 Replies
View Related
Feb 12, 2010
After I've booted my machine I can browse the internet over my wireless network just fine, but when I start Evolution email it prompts for my admin password beforeonnecting to ISPCan I automate / avoid my respnse to this password prompt ?
View 4 Replies
View Related
Jan 14, 2011
is there a way to edit which commands require a sudo? or some programs, like the CPU frequency monitor on panel, requires a password to change. where would i start if i want to change this?
View 6 Replies
View Related
Jun 24, 2011
I hav disabled the password on startup but the default still pops up and asks the password. How can I stop that. I use UBUNTU 11.04
View 3 Replies
View Related
Jul 19, 2009
Slackware64, 13.1, Xfce: Sreensaver is configured to Lock Screen After 5 minutes. This works fine. My problem is that 90% of the time, when I go to wake the screensaver, it won't ask for a password and won't come out of screensaver. The only reliable method I have for getting the password prompt is to switch to a console and then switch back to the X session. Then, the screen saver doesn't display, it just asks for a password.
If I move the mouse when the screensaver is active, the screensaver animation freezes for ~20s and then resumes. If I touch a key (Esc, Shift, space, Enter), the animation freezes for ~30s and then resumes. I never see the Enter Password dialog. Screensaver is configured for Random. I haven't reliably gotten it to work often enough to offer any info as to when it works, but it has worked a couple of times. Keyboard and mouse are configured properly (HAL reports "Logitech Logitech USB Keyboard" for my Logitech Elite keyboard and X uses xkbrules evdev; the mouse is an MX Laser, identified as "Macintosh mouse button emulation").
View 9 Replies
View Related
Jul 3, 2010
Slackware64, 13.1, Xfce: Sreensaver is configured to Lock Screen After 5 minutes. This works fine. My problem is that 90% of the time, when I go to wake the screensaver, it won't ask for a password and won't come out of screensaver. The only reliable method I have for getting the password prompt is to switch to a console and then switch back to the X session. Then, the screen saver doesn't display, it just asks for a password. If I move the mouse when the screensaver is active, the screensaver animation freezes for ~20s and then resumes. If I touch a key (Esc, Shift, space, Enter), the animation freezes for ~30s and then resumes. I never see the Enter Password dialog. Screensaver is configured for Random. I haven't reliably gotten it to work often enough to offer any info as to when it works, but it has worked a couple of times.
Keyboard and mouse are configured properly (HAL reports "Logitech Logitech USB Keyboard" for my Logitech Elite keyboard and X uses xkbrules evdev; the mouse is an MX Laser, identified as "Macintosh mouse button emulation").
View 3 Replies
View Related
Sep 1, 2010
There where some updates for 10.04.1 yesterday, after I installed them, a few hours later I restarted my machine as new headers and kernel files where downloaded.So this morning, when I come in, I wanted to check my software sources as I saw something a little odd yesterday.When I try to start that program; I am asked for my administrator password. Not the password I use for administrative tasks; which is what I am generally asked for.Anyone else seeing this? And if so, what happened. The admin account I have setup is My account, I am the only person on the machine. In the past I have entered my password and carried on; not this morning. Not sure what is happening; but I have not setup an actual admin account / password.
View 4 Replies
View Related
Nov 27, 2010
Downloaded Wubi on Win 7- 64 bit. ran it,a nd it asked for password. I gave it my Ubuntu account password a d it did not work. I also gave it my PC's password, it still does not work...
View 7 Replies
View Related
Feb 18, 2011
i use that box as a 'cruncher' it runs the BOINC client with the WCG project as a full time 'cruncher'so that kinda sucks right nowso i think the install workedbut when it restarted it asked for my user name and password (in terminal mode i think)that leads me no-whereso before i did this upgrade i swapped out my GPUsi pulled out my 8800GT and put i back in my main rigand put a 4550 in its placeit started an ran in safe modecould i just simple be over looking the face that 10.10 cant use the 4550 and all i have to do issudo appget the drivers for it to get up and running again?
View 2 Replies
View Related
Mar 19, 2010
I ran zypper in vm-install the other day and build them dependencies with zypper si vm-install.After that tried running 'Create Virtual Machines', asked me for root password, then goes blank.What else am I missing here?Box: openSUSE 11.2 | GNOME 2.28.2 | Acer RS740DVF | AMD64 X2 5600+ | Radeon HD4670 | 3GB RAM
View 2 Replies
View Related
Mar 26, 2010
I am working on a Dell Inspiron 9400 with 9.10 installed and (thus far) working quite well. However, when I type in a command into Terminal (I was trying to install Amarok), the terminal asks for my password and the entire keyboard stops working. As in, I can hit any numerical or letter key, and nothing happens in the terminal but the blinking cursor. The specific command was "sudo apt-get install amarok", and then it asks for my password, and I'm not able to make an entry.
I've tried changing to a couple of the different Dell laptop keyboards in System>Preferences, but again, before typing the command into the terminal, everything is working fine (inside AND outside of the terminal). After the password prompt comes up and the keyboard stops working in terminal, all the character keys still work fine still outside of the terminal.
View 3 Replies
View Related
Jun 30, 2011
Using Ubuntu 10.04 LTS.
I have an intranet server behind a NAT router. Very standard linksys router home setup. The server has a static IP. I used port forwarding in the router to use SSH and log into the server remotely - it works OK.
I want no one outside my home network to access any webpages on the server unless they're authenticated.. I know I could port forward like with ssh but with http port 80 and then see webpages , but again this would open it up to anyone with my cable modem's IP - wouldn't it?
I need a secure way like SSH that requires a password before anyone could access port 80 and http from the server from a remote network.
How do I do this? And on the local network people can get served pages normally as usual. Just remote would need authentication. Must be commonly done(?)
View 2 Replies
View Related
May 4, 2011
i changed my password and whenever i log in i get a message that ur login keyring password and user password do not match, so how do i change my login keyring password!!
View 1 Replies
View Related
Jul 25, 2011
I have a brand new install.I was doing some housekeeping and made a more sure password.Something went wonky and I got locked out.So I booted to root and changed the password.I'm back in the box now.But, my keyring password no longer matches my user password.So every time I want to do something I am asked for my old password.How do I change my keyring password to match my login password?
View 3 Replies
View Related
Jan 27, 2011
I have a question about GNU-PG security for email clients. I have read that this is the best email protection available. I have it among available Ubuntu packages, too, but when I wanted to use it the registration process asked my real name. considering full or the best possible privacy claim, why real name? or is it ok just not to give the real name? I am not advanced in cryptography, could/can this not be avoided?
View 4 Replies
View Related
Sep 20, 2010
Hello everI'm really confused by the ways an encrypted partition get mounted.It just mounts the partition without asking for the passphrase used to create it. I can list the files in /mnt/sda2, create a new file test.txt, but have no access to the files written to the "real encrypted partition".Then I can see/change the content of the encrypted partition but without being able to see/change the file test.txt created previously with the normal mount command.
The reason I'm asking is that I'm having my custom Debian to automount every partition available on the system at boot time. Is there any way/command to tell if a particular partition is encrypted (by cryptsetup) or not? So that I can mount it the right way and not make the users confused (or even harm the encrypted data).
View 6 Replies
View Related
