I am a new ubuntu [ubuntu 9.10 desktop edition] user. I am having trouble setting up my internet connection. It used to be very easy to setup internet connection in windows xp. all i had to do is create a new lan connection and had to configure the internet protocol with the ip addresses. I am not sure what to do in order to get the connection working.
View 3 RepliesI have virtual XP set up with VirtualBox and I can't (been trying for a couple weeks now) to get an Internet connection on the VM. I have tried using NAT, bridged adapters and nothing.
View 1 Replies View RelatedI just installed Ubuntu 10.04 . Need to get my wireless router working on my HP laptop. Have been using a Linksys WRT54G Router with windows and it is working properly. Tried setting up in NetworkManager but it does not work.
When looking at things in the Ubuntu terminal it says the network is DISABLED.
The problem isn't with thew new computer but with my computer running Ubuntu. The problem is that I'm having trouble getting the Internet to work. Before the router I just plug my PC straight into the modem but now with the router I can't get on the Internet. I can get a connection to the router but no Internet. I know the it is not the router because I use my PS3 and it worked fine. I spend like an hour just trying to get the connection but can't figure out the Internet problem. What I did to get the connection is copy the ip address, Mac, and etc. from the PS3. Then I made a new connection and put the data in the IPV4 settings and it got a connection but I'm not sure if I did that right or just got lucky
View 2 Replies View RelatedI have successfully set up a cable internet connection in Ubuntu (created a new DSL connection by typing login and password and connected the cable - it worked). But I have no idea how I can set up a wireless internet connection.I have a wireless access point TL-WA501G, laptop and a cable internet connection with fixed IP address.My laptop can see the wireless access point. But I really do not know how to make it all work and what to start from.
View 2 Replies View RelatedI have just installed Linux Mint 8 Helena & it appears to be working well alongside my xp system. The problem I do have is setting up the much needed broadband connection. I have an adsl speedtouch330 usb modem, with tesco.net as my server, which works just fine on xp hence this mail. Am I missing something obvious, or have I got myself into depths much deeper & complex than I thought.
View 5 Replies View RelatedI have tested several Linux Distros over the last weeks, and with all of them my DSL connection have been working out of the box (for intance Mandriva, Ubuntu, Mint). But it does not work on Dreamlinux, neither on Live CD or now where Dreamlinux is installed on my harddisk.
According to the guidelines provided by my Internet provider I need to use TCP/IP and activate DHCP. And make sure that PPPoE is not activated.
I see nowhere I can do this in Dreamlinux. In the controle panel i can run Wicd. Then I can chose to de-activate Wicd - this gives me an option of entering Adress, Networking mask, Gatway and Nameserver - for static ip it says - and this is the opposit of DHCP, right??
SO - what to do? Should I get a debian package or something? (Dreamlinux is using debian packages, as far as I could see)
I am new to Linux and Debian. I have Compaq Presario R3000 laptop, which is 5 years old now. I have RealTek RTL8139 family PCI Fast Ethernet NIC. Currently I have a broadband connection at home. I have dual boot Windows XP Professional and Debian (which I installed a week ago through CD). I have done some preliminary tests for the network and I am posting the screenshots for the tests (e.g. lspci, ifconfig, etc.). I also did two more commands. For 'cat /etc/network/ifstate' the output was 'No such file or directory'. Same output was for the command 'cat /etc/network/options'.
View 7 Replies View RelatedI have set up one of my linux box as link load balancer for two ADSL connection. After deployment, I have found out that instead of being fast, it has become slow. What I have observed that my request get out to internet but comes back intermittently. Is this a standard scenario ?
View 1 Replies View RelatedI am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies View RelatedI'm trying to create a PAN (Personal Area Network) using a laptop (Siragon ML-1040) and my desktop computer, but I get the Connection Refused (111) error.
Blueman doesn't detect any network service between the two computers unless I start PAND on one of them and then it detects the NAP service. That, only after I enable the NAP/Workgroup services on the Services submenu in Blueman. However, it doesn't work neither with the NM plugins or without them (dhclient and that other one I can't remember the name of).
Any clues over here? I'm using pand 4.91 and blueman.
I'm trying to set up a wireless AP with Internet sharing. I currently have the AP setup with hostapd and a dhcp server. The clients can connect but there is not Internet sharing. Now my situation is somewhat uniqe in that my internet connection is my teathered android cell phone. The tether app is azilink and i use openvpn to create a virtual networking interface(tun0).
View 4 Replies View RelatedIts a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
It is most certainly my fault but I am now without a sound volume control and it does not show up in the add to panel.What can I do here? Does your icon have code that that I can use or can I find the file somewhere and create a link? Alsa mixer works ok and nothing is muted and I have sound so as to play music. The Internet connection and the power connection icons also don't appear.
View 5 Replies View RelatedAfter upgrading to Ubuntu 10.04, I'm not able to make any connection to the internet with either my netbook through WiFi or my computer on wired LAN. I can, however, ping my Solaris machines and Macbook. How do I fix this?
View 9 Replies View RelatedI tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed. I tried offline/online, that did not work either. when I click the firefox It says you are not connected.
View 1 Replies View RelatedI seem to have is trying to get the internet to work. I can go to ..... ect but when I try to run playonlinux it says you do not seem to be connected to the internet, please post if you have anything useful, as I said I am very new to linux so be as detailed as possible.
View 4 Replies View Related1 linksys router: gets the net from PPPOE and give the network DHCP. The router IP is 192.168.1.1. 1 windows laptop that work wireless and wired. 1 debian desktop that work wired and not working wireless. THe problem with the debian desktop is like this: I have a TP-Link TL-WN321G installed and found by lsusb command. I make a wireless connection WPA Personal (just like the router settings) it says i am connected to the wl network but no internet connection. the route command give me this:
[code]....
I tryed with wicd who said that the connection is WEP (and it's not, it is setup to WPA on the router and the network-manager conncetion) and when i try to connect i get bad password. I tryed with network-manager uninstalled and no chance.
I would like to have all traffic from the ethernet connection out through the wireless (basically using the box as a router) however I am having some trouble doing this.
I have done this before on Windows however I am having some trouble doing this on linux, I have tried using Squid Proxy however I am having some trouble using configuring/using it.
I am using Yellow Dog Linux however I am willing to change to any other distro as long as it is compatable with PS3 (as this is what im using linux on)
I have installed Fedora 11 recently. I want to share my Internet connection.
I have e LAN connection eth0 which is connected to internet.
I have a Wireless connection wlan0.
I want to share my internet connection with wireless connection.
I have two linux laptops. Currently, I'm using both of them at work, side-by-side. Now the problem is, I'm connected to a wireless router, but the wireless only works on one of the laptops. So I'm stuck with one laptop that has no access to the internet. Both machines do, however, have working ethernet nic cards. So, I was wondering if I could use the laptop with the wireless connection to share the internet connection with my other linux machine and access the internet on both of them. Or as an alternative, just use the internet on the machine without wireless and be able to switch back and forth, that would increase my productivity like 30 fold.
View 5 Replies View RelatedOpenSuse 11.4 Asus Netbook 1000H Following other members in the forums I have installed Opensuse 11.4 on the Netbook. In the early days Ubuntu Netbook Remix worked well for me. But this has been discarded, and the "one size fits all" Ubuntu had become slow and cumbersome. So..... onto my post. Opensuse is working well. The install went beautifully.
It detected the Wireless Internet and I am able to get on line. I also need to share the Internet connection to a desktop. This is done via a small network switch. Thus far I cannot do this. I tried to use ifup to configure a static ip but this busted my Wireless configuration. I went back to knetwork manager. Then I tried to set up the wired network using knetwork manager and under IPV4 "share" the connection. But this blanks out any possiblity of a static address and substitutes dhcp. My desktop cannot ping the this dhcp address. Ubuntu had this thing called Firestarter? - from memory. This configured the system to sharing the network.
I am having some trouble setting up my wireless connection. I have a desktop version of ubuntu, and am trying to connect wirelessly to my modem, but it dosent even seem to be recognizing my wireless usb card. How do I get it to do that? Also, when I go to set up new wireless connection, it asks me for my ssid, mac address, mode, bssid, MTC, Wep index, authentication, ipv4 setting, and ipv6 settings. What the heck am I supposed to put in for those things?
View 5 Replies View RelatedSet Up and Connect to my Wireless Internet. I have tried to get it to work but I have not been successful so far. Here is what I have done:
Created dutthome3 (My Internet Name) in the Wireless Connections:
Editing Wireless Connection, Wireless Security, IPv4 and IPv6 Screen Shots/Settings:
So where are my mistakes? What do I need to change to Set Up my Wireless Connection?
I'm having a bit of trouble setting up a wireless connection. I'm really trying to set it up for Lucid Lynx on another partition, but right now I'm on OS X running Jaunty Jackalope in Sun's VirtualBox. Neither auto-recognize the network I'm trying to connect too (don't know if Ubuntu has that feature), but OS X has a good connection. I'm trying to set up Jaunty first since I at least have some internet connection, but I'm not planning on using it that much.
So far, what I have put into the Network setup application is the network's name (SSID, right?), that it's WPA, and the network password. Though now I've checked back on the password field, the 8 digit password (eight circles) has been replaced with a bunch of circles, so I don't know what's up with that.
What's empty is the BSSID field, the MAC address, and for all intents and purposes, the password field since it's not the same as what I put in there. I assume OS X has a copy of this information somewhere since it's already connected? I've tried quite a few attempts to get either Ubuntu system to connect, and my google-fu is not helping.
I have the "Work Offline" problem: when I boot up, the icon on the toolbar tells me I have "No network connection". This is not quite true, since I can access the first page of any website - only subsequent pages are inaccessible. I get a message saying that Firefox is offline. However, when I uncheck "Work Offline" in the File menu, it makes no difference to this behavior.
The problem is on my Ubuntu Dell desktop, which is connected to the internet with cable broadband via a D-Link router (wired connection). It has worked fine up till now. I use Ubuntu 10.04 and Firefox 3.6.11. I am writing this on my Ubuntu Dell laptop which is wired to the same router, so I assume the problem is not the router. I have tried various strategies suggested in threads on these forums, including editing about:config, changing "allow" to "deny" in some lines of /etc/dbus-1/system.d/NetworkManager.conf and changing from Automatic (DHCP) to Automatic (DHCP) Addresses only, but no luck so far. The contents of ifconfig are:
eth0
Link encap:Ethernet HWaddr 001:aa0:91:a7:51
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets: 0 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisons: 0 txqueulen: 1000
RX bytes: 0 (0.0 B) TX bytes: 0 (0.0 B)
[Code]...
If I comment out "auto eth0" as well, it makes no difference. If I uncomment both lines ("auto eth0" and "iface eth0 inet dhcp") then I lose the internet connection altogether.
I just installed Ubuntu 10.04 and am very excited about using it for the first time. I am very new to computers and stuff though so I don't have much of a clue as to what I'm doing. Although it installed fine, for my wireless connection it says "device not ready". What does this mean and how do I connect to the internet?
View 1 Replies View RelatedI set up a static IP address yesterday, following the instructions at the top of this page and since my machine no longer connects to the internet (although all other machines are connecting fine, so I know it's a result of this change).
View 6 Replies View RelatedI am running Ubuntu (Karmic) and did the command: "sudo apt-get install ssh", In an attempt to download, install and setup OpenSSH. This installed both the client and server and during setup actually brought the daemon up and running as well. I then attempt: "ssh <myusername>@localhost" and it prompts me with a password. I enter the password, hit enter and immeditaly see the following results:
Read from remote host localhost: Connection reset by peer. Connection to localhost closed. I'm fairly certain that it is not on the client end as I can connect to other machines through ssh. I've tailed all the logs, messages, dmesg etc and nothing seems to be out of order, or even remotely related to shh or connections etc. My desktop machine had no (as in zero) issues installing and setting up OpenSSH, and connections can come and go as normal.
This has already been asked, and answered here: [URL] but there is one problem, this requires a window manager, and network-manager. I am using Ubuntu 9.10 Minimal with no window manager, and i want to recreate the exact effects of the second post in the above thread.
I have one desktop (Ubuntu 9.10 Minimal) with a USB wireless adapter (wlan1) and an ethernet port (eth0). I want my second desktop (also 9.10 Minimal; connected to desktop 1 via ethernet on eth0) to recieve the connection through desktop 1's wireless. I realize this is rather easy with network-manager, but I am not sure how to go about it through command line.