Ubuntu Networking :: Setting Up Connection Sharing - No Window Manager
Mar 20, 2010
This has already been asked, and answered here: [URL] but there is one problem, this requires a window manager, and network-manager. I am using Ubuntu 9.10 Minimal with no window manager, and i want to recreate the exact effects of the second post in the above thread.
I have one desktop (Ubuntu 9.10 Minimal) with a USB wireless adapter (wlan1) and an ethernet port (eth0). I want my second desktop (also 9.10 Minimal; connected to desktop 1 via ethernet on eth0) to recieve the connection through desktop 1's wireless. I realize this is rather easy with network-manager, but I am not sure how to go about it through command line.
View 9 Replies
ADVERTISEMENT
Jan 1, 2010
how to change the IP range provided by default by Network Manager / dnsmasq from 10.42.43.-- to something else?
I have setup a working network using a Bell wireless modem (Canada) and Network Manager in 8.10, 9.04, and 9.10.to do Internet connection sharing. In 8.10 the only way I could get it to work was with WICD and KPPP, many hours spent on this one. I got it to work in 9.04 and 9.10 using network manager, but certainly not out-of-the-box. If someone would like some tips on how I did it, in each case, let me know.
My current challenge is trying to set the dhcp range of dnsmasq (which I am 99% sure is what is handing out addresses) from th 10.42.43.-- address range to a 192.168.0.-- range.
I HAVE edited /etc/dnsmasq.conf and can get the edits to this file to break the setup (dnsmasq will not start) but have not been able to get it to change the IP address range.
It seems that either this file is ignored, or overridden by some other process. I have looked at the very good post at [URL] about dnsmasq but this does not do the trick.
By the way, the way I can get this to work is to start NM, establish my cellular internet connection, then kill dnsmasq then establish my ICS network (on eth0). If I don't kill dnsmasq, then it does bring up the connection, but it then shuts down in a matter of seconds. It is all very manageable using a launcher (kdesudo pkill dnsmasq) on the task bar, but not all that elegant.
the IP range and where this is provided to Network Manager or the network itself is my real question now.
View 7 Replies
View Related
Dec 21, 2010
I'm trying to share internet connection with my wifi capable mobile device. For that I'm creating ad-hoc wifi connection in networkmanager with 'shared to other computers' ipv4 option. And there is the problem - the device cannot get the setting via DHCP. The firewall is adjusted properly by NM, dnsmasq is started. I've looked at dnsmasq arguments string and found that the temporary config file which is provided by NM is empty. So, where else should I look for a possible reason or should I just post a NM bug?
View 6 Replies
View Related
Oct 14, 2010
How do I tell the shared connection that it has a static IP and that I dont want a DHCP on the network?Do I have to set up DHCP on the box with the shared connection, even if that box only runs DHCP for a single IP address being the eth0 that is shared?Or can I tell the shared connection that it has a static IP and still allow network manager to run the shared connection?Or should I specify static IP's for all clients and the shared network manager and install say firestarter on the gateway to run the NAT for the eth0 out to eth1.
View 3 Replies
View Related
Feb 3, 2009
I have 2 workstations that I'm trying to network together so that I can backup each to the other. One is XP sp2 and the other Fedora 9. Since installing Samba on the Fedora box and trying to get it configured, I have a problem that Add/remove programs won't do installs because it says there's no connection to a network. Network Manager says there aren't any connections, but it worked before the Samba install. Mozilla and Thunderbird can access the internet OK. Both workstations are connected by cable to my router and thus to my ISP (DNS server).
Two questions:- where can I find hints on setting up a wired connection (which card's MAC address does it want? router or wrkstn?) and Am I right that Add/remove is stuffed because of Network Manager?I now have Samba working from Linux to XP, but still can't get into Linux from XP. I tried the Linux PC's MAC address and set up a wired connection in Network Manager. NM still thinks there isn't one...
View 1 Replies
View Related
Sep 13, 2010
I have a HTPC that launches XBMC standalone automatically, but want to be able to quit and login as a normal Gnome user. I heard that you can set a default Window manager to the user. How do you do that?
View 1 Replies
View Related
Mar 25, 2011
I have Squeeze running gnome well.It connect to my WFI AP automatically.I installed window maker yesterday .After I enter the window maker desktop, I found no internet connection.I run a network tool shortcut in th eapplication menu.This program is the same of my gnome desktop.I change the setting to make it automatically connect to my AP but in vain.
View 12 Replies
View Related
Feb 12, 2011
I recently installed ubuntu on one of my computers and am trying to get all my sharing worked out so I can access stuff with my windows machine. I'm still very stupid when it comes to linux.
Setting up sharing with Samba, I got my /home/user/media folder to share just fine. However I made a folder located on my second drive that I would like to share.
I have this entry for it in my smb.conf
Code:
[80GBshare]
comment = /media/Sifl_80GB/Shared/ folder share
path = /media/Sifl_80GB/Shared
[Code].....
the second drive is mounted on /media/Sifl_80GB and it was formatted as ext4.
My windows machines see the 80GBshare entry but I get the error "network path not found" when I try to open the folder. Does this mount need to be listed in my fstab for this to work correctly? I'm noticing something in the comments of the smb.conf for auto-mounting a cdrom drive when a cdrom drive is accessed by adding a fstab entry, so I'm wondering if this needs to be done with my second drive?
View 4 Replies
View Related
Apr 3, 2011
I'm trying to create a PAN (Personal Area Network) using a laptop (Siragon ML-1040) and my desktop computer, but I get the Connection Refused (111) error.
Blueman doesn't detect any network service between the two computers unless I start PAND on one of them and then it detects the NAP service. That, only after I enable the NAP/Workgroup services on the Services submenu in Blueman. However, it doesn't work neither with the NM plugins or without them (dhclient and that other one I can't remember the name of).
Any clues over here? I'm using pand 4.91 and blueman.
View 3 Replies
View Related
Jan 6, 2010
have a home network with two desktops and I also have a netbook. The netbook and nettop (desktop) both run UNR 9.10 and my other desktop runs Ubuntu 9.10 with all updates in place. So all 3 machines are hooked up to my home network via wireless router (secure and password protect). I want to set up file shares between machines in order to move files between machines and also to have all machines connected to and accessing one shared printer. Fair enough. According to Ubuntu help I click on a folder, then properties then the share tab and click all checkboxes and give the share a name. Then I do likewise on my two other machines. So in theory once every machine has a share setup then you should be able to access via the other machines by simply going into Network, finding the machine, opening it and mounting the shared folder. In some cases I see the other machines but when I click to open them it says "unable to mount location". So now I would like to ask... where should I look to resolve this? The wireless router settings? Some type of network or security settings on each of my machines?
View 6 Replies
View Related
Nov 15, 2010
I'm having issues setting up file sharing between two Linux machines. I've tried the forum cookie cutter answer of "right click folder, sharing options, share, allow others to write and edit, allow guest accounts", but I simply cannot get my two Ubuntu 10.10 machines to see each others shared files. I HAVE been able to download and use the program "Personal File Sharing", and with it I CAN share the "Shared" folder between both machines. I'd prefer to learn the correct way to link these two boxes up though, and be able to share more than 1 directory. Am I missing any programs to complete this link? Do I need to use Samba? I've tinkered with it, and I can get both computers to see a workgroup name I set up, but cannot get them to view each other in it.
View 9 Replies
View Related
Jan 3, 2011
I used network manager to share internet connection coming to wlan0 with eth1.
I have internet in my PC coming to wlan0 and I want the client I hook to eth1 to have internet too.
It works with network manager but I think it added something I didn't ask for... Apparently the client connecting to eth1 is recieving an IP from a DHCP server outside the range of wlan0 IPs.
How can I configure eth1 to assign an IP that is inside my wlan0 LAN or at least give a static address to eth1 client that's inside my wlan0 LAN and internet keeps functionning.
View 1 Replies
View Related
Jun 14, 2011
I have done the ICS in my ubuntu 10.10 according to this article using eth0 connecting to wan router and eth1 connecting to the lan switch. Everything works fine.I have an open vpn connection which have full tunneling through the server. I want the vpn connection to be shared on the lan, and every internet connection will go through the vpn server. If I change the eth0 to tunnel adapter in iptables forwarding rule, will it work?
View 2 Replies
View Related
Feb 5, 2010
I am using Ubuntu 9.10 and trying to use Internet Connection Sharing through my Dell Mini 9 laptop.
The incoming internet is from wireless The outgoing internet is from Ethernet I am using a crossover cable as I have heard this is necessary I followed the 9.10 method on my Auto Eth 0 connection Here is a link to the Ubuntu Documentation I used The computer I am trying to share to does not pick up the internet being shared from the cable.
View 7 Replies
View Related
May 10, 2010
I need to share internet from my dsl connection to laptop (who is using windows) through my wireless usb d-link gwl-122. How to do that?
View 1 Replies
View Related
Aug 4, 2010
I want to use the wifi card in my laptop to share my internet connection to my Android Phone.Android phones don't support Ad-hoc networks yet (maybe not ever) so I need to the shared network in Infrastructure mode not ad-hoc mode.Using Ubuntu 10.04, If I click on the NetworkManager Applet ( 0.8 ) and select Create new wireless network, it will create an ad-hoc network, I then tried changing this to infrastructure, but it didn't work.Is there some way of modifying this created network to make it appear as infrastructure, or alternatively create a shared internet connection in infrastructure mode?
View 2 Replies
View Related
Oct 25, 2010
ubuntu recognizes the router im using that goes to my ps3 but for some reason i cant link the router to my internet connection.
View 1 Replies
View Related
Mar 5, 2009
A friend of mine is trying to setup internet connection sharing in Ubuntu, which is something I've never dealt with before. Here's the situation:One desktop PC is dual-booting Ubuntu and Vista. This box is connected wirelessly to the router and can access the internet just fine. The desired setup is to have an xbox360 connected (wired) to the desktop PC, allowing it to share the internet connection.
1) A crossover cable would need to be used between the desktop PC and the xbox.
2) The xbox would still have the router's internal IP as the default gateway (I have zero experience configuring networking on an xbox... I hope these options are easily available).
3) The internal IPs can all be on the same network (i.e. router = 192.168.1.1 ; desktop = 192.168.1.100 ; xbox = 192.168.1.101)
4) IP forwarding would need to be enabled on the Ubuntu host
Is there anything I'm overlooking or just oversimplifying, or should that just about do it?
View 1 Replies
View Related
Jan 16, 2011
I just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
View 7 Replies
View Related
Jan 27, 2010
I've got wired connection on my ubuntu and I set up a wireless network so I can share internet with other computers. I added another computer to the network, but it's asking for:
* an IP address
* router address
* subnet mask.
Where can I find these values?
View 3 Replies
View Related
Feb 5, 2010
At my home I am using firestarter to connect my XBOX 360 to the internet and it works perfectly, never crashes etc and I get a moderate NAT which I've never experienced any problems in having.
I have my devices set up like this
eth0 - ifconfig eth0 192.168.2.1 netmask 255.255.255.0 broadcast 192.168.2.255
XBOX - 192.168.2.10 netmask 255.255.255.0 broadcast 192.168.255 gateway 192.168.2.1
This configuration works perfectly on my router at my house which has the IP of 192.168.0.1
However at my friends house he has a router with the IP adress of 192.168.2.10 or 192.168.2.7*, I don't remember exactly but I'll find out tonight. I have tried changing my IP settings on my xbox and eth0 to no avail. I noticed instantly that the XBOX IP is the same as my friends router. what the new settings would be, or simply changing the router's IP.
However there is also an issue with the DNS servers. I can't find them anywhere on the router or on the router box itself. I heard that I could point it towards my default gateway however.
View 2 Replies
View Related
Feb 18, 2010
How to share internet between two ubuntu PCs via bluetooth?
I have a Desktop and a Laptop. Their Configuration is as below:
Desktop:
Laptop:
Internet Connection: I want to use my desktop internet connection via blutetooth for this computer.
So the question is that how to share internet connection between these two Ubuntu computers via Bluetooth?
Remember that:
I've seem that HOWTO about connecting ubuntu PC to internet via mobile phone. I don't mean that!
View 3 Replies
View Related
May 4, 2010
i have an evdo connection with which i connect to the internet. i have been trying to share this connection for quite a few days from my lucid machine to a windows 7 pc but have failed. i have tried dhcp3-server, firestarter, network manager's built in capabilities but have failed! today i manually configured da windows 7 pc to an ip address within da range which network manager ws assigning when 'shared to other computers' ws selected and it worked! Now da question is how do i do it automatically? dhcp3-server never starts, it always fails with the error 'not configured to listen' or sumthng like it! Plus i want the wireless of my laptop to make an ad hoc connection to my mobile fone, which is also no possible...i think its some problem with da dhcp server.
View 1 Replies
View Related
May 28, 2010
i'm totally new to Linux and Ubuntu. I own a huawei 3g modem through which I connect to the internet. I plan to share the internet from that connection between my Vista pc and another pc running Ubuntu Lucid Lynx. The computer I plan to use to share the internet, let me call it Server, is equalling running Ubuntu Lucid Lynx. My Server perfectly recognises my modem and connects to the internet using it and I can browse.
I plan to connect the routers internet port to my Server using my servers network card. Then i intend to let the router do the sharing of the internet to the other computers on its own. I don't have any idea how to go about doing this. Originally, I tried a direct connection between my Server and the other pc running Lucid Lynx without bothering with the router and using the following settings which i found on an online tutorial:
Server ip 192.168.0.1
netmask 255.255.255.0
and no gateway
then on the client
client ip 192.168.0.5
netmask 255.255.255.0
gateway 192.168.0.1
I used open DNS servers for the DNS
However, i was unable to browse the internet from the client even though a connection between the two was established. Then I thought to myself, why go through this trouble, I have a router so why not go ahead and use it. But then I do not know how to do that. Using the router will enable me to effortlessly connect all my computers irrespective of operating system and ease the network creation process.
View 5 Replies
View Related
Jun 20, 2010
I'm trying to share the internet connection of my Windows XP Virtual Machine (virtualbox) to Ubuntu. I know it sounds weird, but what happens is that i'm using a 3G modem to connect to the internet and 3G connections are still very unstable with ubuntu's network manager. Fortunately, the modem works a lot better with my Virtual Machine. I have already set up a "host only" network between my Windows XP guest and my Ubuntu host and i can they can ping each other but i still can't share the connection of my virtual machine. I already selected "share this connection" on win xp but i think i still have to configure something on ubuntu for it to work. The interface Ubuntu uses is vboxnet0 (not eth0).
This is the last thing to do before i can get rid of my Windows XP partition
View 3 Replies
View Related
Jul 25, 2010
May I ask if I can share my mobile broadband connection via Wifi?
View 2 Replies
View Related
Jul 31, 2010
i have searched and searched for an answer but nothing i've found has worked for me what i have is an old computer with 2 network cards in it the 1 conected to the internet is eth1 one connected to the xbox via crossover cable is eth2, what i'm trying to do is share the internet connection to the xbox using ubuntu,i've tryed alreadyusing the network manager,using firestarter,ip tables,even nat,and all have failedi've been using ubuntu for 4yrs now, and i have always before been able to find answers to my problems by simply googling the answer. but this is one i can't seem to find an answer on.
View 3 Replies
View Related
Aug 4, 2010
Here's the setup:
I have 2 laptops:
1. Dell Inspiron 8600 with an intel 2200BG wifi card (Ubuntu 10.04)
2. Asus eeePC 1000 (Ubuntu 9.04)
Internet setup:
Laptop 1 connects to a 3G connection and shares it with laptop 2 using an ad-hoc network.
I upgraded to Lucid on Laptop 1. Prior to the upgrade everything was working. Now, when laptop 1 tries to connect to the ad-hoc network it almost immediately disconnects and tries to reconnect again.
Ad-hoc network settings:
The ad-hoc network uses a WEP key. In IPv4 settings, "Share to other computers" is selected.
Dmesg output:
Code:
are: requesting ipw2200-bss.fw .....
** (nm-applet:4259): WARNING **: _nm_object_get_property: Error getting 'Default' for /org/freedesktop/NetworkManager/ActiveConnection/327: (19) Method "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" doesn't exist
** (nm-applet:4259): DEBUG: going for offline with icon: notification-network-wireless-disconnected
View 9 Replies
View Related
Nov 18, 2010
configuring Internet Connection Sharing from my Ubuntu 10.10 machine to a Windows XP machine. I've seen How To's but they didn't work, yet.
The Ubuntu machine connects to the Internet through a DSL USB modem that required packages not provided with the distribution, and specific instructions to configure it; so getting Internet working alone was difficult. As a result, I don't even use Network Manager, rather connect using the command pppoe-start. The machine is connected to the Windows PC through a simple cable, through the Ethernet card.
Some tutorials I've seen on ICS are for machines with two Ethernet cards, or for wireless connections; but I've seen none for a USB modem. However I once found one, years ago, and it worked, but I couldn't find it now. It was using iptables, and I didn't really understand what I was doing, but it worked. But then I had to format the disk, and now I can't find a way to get it working again.
View 8 Replies
View Related
Dec 9, 2010
I have a laptop with Easy Peasy / Intrepid Ibex connecting to internet through wifi (firewalled VPN), a PC with Windows 7, and a crossed ethernet cable to connect them. How can I get Internet on the PC? I tried to connect them but I can't even ping each other!
View 3 Replies
View Related
