I installed Apache2 and I added a second virtual host, now can i separate the 2 hosts and let them access 2 different internal test sites? For Example lets say"
User1 uses one IP
User2 uses second IP
How can I separate it in Apache2 and in the /var/www ?
I have set up a SSL site for my default Apache server. But I want to set up multiple SSL sites for multiple IP based as well as Name based Virtual hosts. Is there a way where in I can include definitions for SSL certificates and keys within the Virtual Host directive in the httpd.conf, so that I can specify separate key and cert file for every Virtual Host.
View 11 Replies View RelatedI have some problem in apache2 configuration. I have two websites on same IP on LAN.i.e. 192.168.1.5
[Code]...
What should I check in a few blogs I checked they said to mention in [URL]...But in this case what should I put I have two different websites or what other thing I have missed? I do not have access to DNS so that on LAN I can point site1.abc.com and abc.com to same IP 192.168.1.5 which to me seems could resolve the issue.
I currently have an Apache Web Server running on Ubuntu 10.4 and I use a DynDNS service to make them accessible to the outside world via a domain and/or subdomain.
My configs currently look like this:
<VirtualHost *:80>
ServerAdmin <obscured>@<obscured>.com
ServerName <subdomain>.<obscured>.com
ServerAlias <subdomain>
[Code].....
This works fine from access outside of the network and all subdomains resolve to the correct directory.
The problem I am having is with accessing a subdomain over my internal network.
I can access the Web Server using the server's IP address: http://192.168.1.123/ but this always takes me to the same virtual host and I don't know how to distinguish between different virtual hosts (different subdomains).
Ideally I would like to access the same subdomains using http://<subdomain>/ where <subdomain> is the same as the subdomain attached to the external domain name.
Every time I try to change file or folder permissions on a separate internal drive in ubuntu 10.10 desktop in sudo file manager, It sets it right back to the way it was before and doesn't save the permissions I want to change it to. The files aren't critical system files that are not even existent on this hard drive.
Its on a completely separate drive, Yet aren't I suppose to be in control of what gets changed to what? Instead of a Operating System doing something just for my safety? A simple AVI files permissions being changed shouldn't hurt anything. How to I stop ubuntu 10.10 from auto setting the permissions of my folders and files? Its really starting to me off right now. I've been looking around on google for Auto reset permissions for ubuntu, Haven't found one word about it. Yet I'm just going to assume someone might know how to resolve this? Or has dealed with this before.
I'm just trying to Forcefully set my folders on my separate drive all to 777 because they are all 775 and 755 and I can only access them with Write privileges if I run the SUDO file manager which I really hate having to do every so often I'm sure you can relate to how annoying it is to have to open up terminal and type something in to open a fully priviledged file manager.
I'm in the process of setting up a script in perl to make 1,000's of curl calls to my companies application on our test server. Our software does all sorts of tracking of data based on IP addresses using geoIP, so i was wondering if anyone knew of a way to fake these addresses to the server?I know a big issue with the IP faking is the return path but i dont really need this. I also cant do it on the hardware level since the script is going to be picking lots of different IP's at random.Anyone have any idea if this is possible and if so, are there any known libraries i can use for this? I prefer perl but any Linux compatiblie scripting language is fine.
View 1 Replies View RelatedI have been searching and reconfiguring for 6 days now and have lost several clumps of hair.. PROBLEM: I want 2+ virtual hosts on my ubuntu server (1 ip) BUT - Only the first "alphabetically" listed sites-enabled shows.
[Code]...
[Code]...
I have a problem configuring my PostGreSQL server for internal network access.
I want to be able to access my postgre server from 192.168.1.10
It works when I set listen_address to *, but if I input 192.168.1.10, or any other IP address, I always get:
Quote:
WARNING: could not create listen socket for "192.168.1.10"
FATAL: could not create any TCP/IP sockets
postgresql.conf section
[Code]....
I'm not sure is this is possible or not, but what I would like to do is take my public address mydomain.com and configure a virtual host something.mydomain.com only instead of having the content on the same server I would like it to point to the IP of my virtual machine that is in my private network and display that page publicly. Does anyone know if this is possible, or how to do it? I have done this with port forwards, but would like them both to be on the same port.
View 3 Replies View RelatedI have installed Postfix + Amavisd-new, then I am started all services (and configured main.cf and master.cf to use amavis).
The questions are:
1) I am trying to test antivirus scan using eicar test virus
Code:
And the message is successfully delivered to mailbox with mark "CLEAN" in maillog. But I cant see any attachment using
Code:
Where is my mistake?
2) Should I update clam and how I can do it?
3) Is spamassassin enabled by default in amavis (I have started daemon)?
4) Where configuration files of spamassassin is stored?
[Code]....
What I want: multiple virtual hosts with ssl and only 1 ip address: In my example: server = 192.168.227.129
[Code]....
For use on a test LAN, ie. security is not an issue, I need to install the most basic FTP server available just so we can share files back and forth between test hosts : launch FTPd, have it share a directory through either "anonymous" or a single, shared login/password?
View 8 Replies View RelatedI managed to configure my W890i phone to get access to internet through an ubuntu-based computer. It's very easy to use the phone to give internet access to the computer, but the opposite is quite more tricky. For that I've done the following
----On the phone---
-Set the USB network option to "through computer", so that the phone uses the computer's internet connection and not the opposite.
-Decide and set "Shared Network" parameters: user, pasword and workgroup.
-In "conectivity-> internet connection" set "allow local network" to "yes"
----On Ubuntu 10.04---
-Install samba, samba-client, smbfs, smbclient, firestarter and dhcp3-server
-Configure Samba (System-> Administration-> Shared folders): same workgroup as in the phone, add new user (the phone), passwd this new user. In my case the user was called "w890i" and the password given was the same.
-Once the phone is connected to the computer through USB (then select "phone mode"), a new connection appears in NetworkManager: usb0.The aim is to create a shared network that gives internet access to this device. Edit the IPv4 parameters of this new connection, set them to Manual and give an IP adress (192.168.0.1) and a subnet mask (255.255.255.0); the rest of the fields are left empty.Connect this network.
-Set firestarter to use dhcp3: sudo ln -sf /etc/init.d/dhcp3-server /etc/init.d/dhcpd
-Launch firestarter and follow the wizard. Set "allow internet shared connection", choose the device for the primary internet access, and then the device for the shared network (usb0). Then change the settings for firestarter: activate DHCP for local network, set IP to the one we gave before (192.168.0.1).
-Open dhcp3-server config file sudo gedit /etc/default/dhcp3-server And set INTERFACES="usb0"
-Set the policies of firestarter: in incoming connections, allow connections from the IP adress given to the phone (192.168.0.1). Then add rules for the ports that need to be open for this connection. I opened HTTP, HTTPS, SMB, SMTP, POP3, IMAP, IMAPS, DHCP for all the connections in the local network.
-Apply policies and start the firewall.
------------
After all this, the phone can access the internet through the computer. Two problems appeared:
1. I couldn't get access to https sites, like webmails. The phone gave a "communication error". But then I tried with Opera instead of the browser built in the phone's firmware, and I could finally get to https sites.
2. I couldn't retrieve mail, neither POP nor IMAP nor IMAPS. I thought it was a firmware problem again, and I tried out several mobile phone email clients written in java, but none of them worked.
So this is at the moment the problem. If I connect from the phone to the internet directly through 3G, the email clients work for all my accounts. I don't think it's a firewall problem, because the ports are opened for this connection
I've installed Ubuntu Server 10.10 with two network cards. One for external, and one internal.My problem is that as soon as i activate eth1 (external), i can't access the server from the internal network (eth0)
With these settings i can't reach the internal network from inside.If i disable the gateway on eth1 and enable the gateway on eth0, it works.
I have configured CentOS 5.4 as a router/firewall (iptables) as such, and it is working fine:
eth0 - Public IP/Intenet, DHCP
eth1 - 192.168.0.0 internal "net1"
eth2 -10.0.0.0 internal "net2"
I want to add a fourth NIC, eth3, which will be assigned its own Public IP/Internet address (thru DHCP; my ISP provides two). The purpose it to route all net1's internet-bound traffic through eth0, and all of net2's internet traffic to eth3. This allows me to use one router/firewall machine instead of two separate ones. I anticipate that without some specific routing instructions, the default route will be eth0 for all net1 and net2 internet traffic (eth3 will be ignored).
I thought of using just one NIC (eth0) but create an alias (eth0:0), but IPtables (and possible DHCP) can't differentiate between the two (besides, nics are inexpensive). Is there a way to do this through routing commands, or even use iptables prerouting/forward functions (or is using iptables problematic)?
Im having trouble using my wireless usb dongle. I've installed the software and connected to the web, but i can only access a number of websites.
I can access ....., and watch vids and perform searches on google, bing, yahoo and the like. However when i try and access a site that i have searched for it takes me to the internet providers homescreen and tells me to activate my account or top up my account.
I know i have enough GB left as i recently activated my account and i'm able to use the wireless stick on another computer without any problems on all websites. So this leads me to believe that there is maybe a problem with my browser or security settings, but im not sure what to do.
I am new to ubuntu,or linux and i used to access ipv6 sites in my Win7 .
after googling around,i find the 'tips' did not work at all, e.g.
i typed "insmod ipv6",but the shell responded "no such file or directory". What should i do ,was it so hard ?
How do I get rid of my wubi partition since Ubuntu doesn't work on a Vista laptop. Sorry, it was a gift for Christmas. I never realized Ubuntu was so defective.I am running Windows Vista 32 bit with 3 gigs of ram and one partition from the factory (HP).
View 1 Replies View RelatedI am using Ubuntu 10.04, when connected to the ethernet through , Atheros Communications AR8152 v1.1.I can successfully access the internet. But when I try to use the wireless I can connect to the network using Atheros Communications AR9285, but can't access any internet sites. Or ping any other devices on the network.I'm using an Acer Aspire One D260
View 1 Replies View RelatedStrangest thing...yesterday my 11.04 box lost the ability to access anything external. I can ssh to the box from outside my network, and all other boxes on my network are fine, but this one box can't hit anything external. If I attempt to ping a site it's doing the same resolution, but no packets are delivered.
Up until yesterday it was running fine, and I didn't make any changes to my home network or install any updates. Totally stumped.
Edit: this is a wired connection with a static internal IP.
I have been searching and reconfiguring for 6 days now and have lost several clumps of hair.. PROBLEM: I want 2+ virtual hosts on my ubuntu server (1 ip) BUT - Only the first "alphabetically" listed sites-enabled shows.
000-default
[URL]
Individually they all work (if i a2dissite for each leaving 1)
[Code]....
it seems i have tried everything that everyone else is having issues with but nothing seems to fix mine. Possibilities:
1) EC2
2) Permissions on the files - I changed everything to the apache2 user "www-data" - no dice.
3) I am a dope...lets hope its that and one of you kind people point me to my issue.
I have a VPS - and I was trying to install gd support for php on to it. Once I had done this I had a 500 Server Error. With the following errors in the log
[Sun Dec 12 07:34:29 2010] [error] [client 2.125.204.56] SoftException in Application.cpp:574: Could not execute script "/home/perfectp/public_html/phptest.php"
[Sun Dec 12 07:34:29 2010] [error] [client 2.125.204.56] Caused by SystemException in API_Linux.cpp:444: execve() for program "/usr/bin/php" failed: No such file or directory
[Code].....
How to add parental control like { block web site access, restricting login access for particular time, restrict web access} for particular user accounts in Linux.
View 5 Replies View RelatedUnable to access our site via eth0. Can access the same site, via same ISP on wireless laptop, or via eth0, but using ip annonymizer service. Have a feel that it could be something obvious, but after digging through Modems firmware I am running out of ideas
View 3 Replies View RelatedI'm on Ubuntu 11.04 and have wired internet connection.
Some sites (particularly https) take very long time to load . Sometimes I get "Page is taking a long time to load . Reload the page later" message.
Now , this is happening for some http webpages also.
This is not a problem with browser.
I have firefox , chrome , chromium and konqueror installed.
Also I can access all these sites properly from windows so it is not problem with my internet connection either.
i just implemented ur instruction n got success but i have one problem that i want to provide only two or three web sites access to groups in squid.
View 1 Replies View RelatedWebmin running two websites from one server, i've made a second virtual server for my second site including its own document root with it's own index.html file ,but for some odd reason they both run the same site. And i use a Static ip address.
Sites:
[URL]
I am in China, where some web sites(....., facebook, etc) are blocked. So I have to access these blocked site by VPN. But how can I access blocked sites by VPN and unblocked sites by my direct ADSL?
View 2 Replies View RelatedI have a question which it believe it is quite simple but I have no clue how to do it... I'm using Fedora 12 and I'm the only Linux machine in my office's LAN... I have Apache (httpd) setup and my co-workers can access the sites perfectly by using my IP address, for example [URL]... So here's the question, how do I setup a domain name so everyone in the LAN can access the sites by typing [URL]..
View 6 Replies View RelatedI'd like to ask a question on installing software.
I cannot install software using "yum" but I can with the GUI program "Add/Remove Software".
For example, I tried:
It will exhaust all the mirror sites without success.
All the error messages look like:
But I can install "screen.i686" easily from the "Add/Remove Software" GUI and it is very fast.
However, what's puzzling is that I could install some certain packages although I still see the same kind of error messages.
For example,
will work. But in general, "yum" is running very slow and is rejected at every mirror sites.
My settings: I just installed "Fedora 14" (Linux 2.6.35.11-83.fc14.i686) as a virtual machine (using VirtualBox) on a Windows XP (Professional, SP3) host on my laptop (CPU: Intel Core2 Duo), which accesses internet through a HTTP Proxy server since it is behind a corporate firewall.