I have set up a SSL site for my default Apache server. But I want to set up multiple SSL sites for multiple IP based as well as Name based Virtual hosts. Is there a way where in I can include definitions for SSL certificates and keys within the Virtual Host directive in the httpd.conf, so that I can specify separate key and cert file for every Virtual Host.
View 11 Replies
I have some problem in apache2 configuration. I have two websites on same IP on LAN.i.e. 192.168.1.5
[Code]...
What should I check in a few blogs I checked they said to mention in [URL]...But in this case what should I put I have two different websites or what other thing I have missed? I do not have access to DNS so that on LAN I can point site1.abc.com and abc.com to same IP 192.168.1.5 which to me seems could resolve the issue.
I have a CentOS 5.5 Server and I'm hosting 3 different Name-based Virtual Hosts. Using Joomla 1.5 for the site. Each VHost has it's own subdirectory under /var/www so I have .var/www/vhost1, /var/www/vhost2 etc.
The Code in my httpd.conf for each vhost is : -
# Virtual host vhost1.site.com
<VirtualHost 192.168.0.203:80>
DocumentRoot /var/www/vhost1
ServerName vhost1.site.com
ServerPath vhost1/
[Code]...
It works perfectly, but I'm getting a lot of unwelcome spiders and bad bots trawling for MP3 files because there are a few MP3 files on one the sites. I've added all the Bad Bots to my .htaccess file and now I need to know if I should make only ONE .htaccess and put it under /var/www OR create a different .htaccess file for each vhost (this would be an ideal solution, but I'm not sure if it can be done).
[Code]....
What I want: multiple virtual hosts with ssl and only 1 ip address: In my example: server = 192.168.227.129
[Code]....
have a look at the following thread story and please clear my doubt.
View 6 Replies View RelatedI installed Apache2 and I added a second virtual host, now can i separate the 2 hosts and let them access 2 different internal test sites? For Example lets say"
User1 uses one IP
User2 uses second IP
How can I separate it in Apache2 and in the /var/www ?
is there any HOWTO for configuring Webmin Postfix server with multiple postfix virtual hosts? Seems to be a tough challenge to set it up without any easy manual..
View 1 Replies View RelatedWhat is the best way to go about setting up multiple virtual hosts on the same box, one using http and one using https/ssl? I'd like to serve them from the same ip address if possible; I know it's possible in apache 1.3.
View 2 Replies View Relatedapache virtual host to limit the concurrent connections of virtual hosts? Taking into account the host of each virtual user's home directory can also have more than one subdirectory, which should be restricted to a subdirectory. Is beyond the control of the operation of these sites in a subdirectory. Best local restrictions or limitations to the overall situation.
View 1 Replies View RelatedI'm having an issue with setting up the virtual hosts on my web server. I have 2 virtual hosts (example1.com, example2.com). example1.com works but example2.com is sent to the index file of example1.com. I did some searching on google and it seems the problem might be with my /etc/hosts file.
First virtual host that the second is also directed to...in sites-available/sites-enabled (note port 80 is blocked by my isp so I use 8080)
Code:
Second virtual host file
Code:
And my hosts file
Code:
# The following lines are desirable for IPv6 capable hosts
Also I'm using a dyndns.org...would that make a difference?
According to Distrowatch, the two most downloaded distributions are Mint and Ubuntu. I have put both on my computer. In Mint I can find no way to put multiple virtual desktops in my panel. In Ubuntu 10.10, when I go to synaptic package manager the settings tab with the repositories is dimmed out. I have enabled the sources list in administration but it is a less convenient way to add repositories. Despite what the linux community seems to think, I find that Simply Mepis and Pclinuxos are better for actual use.
View 4 Replies View RelatedWhat is the (officially) proper way to configure Apache so that a given IP address can have two or more virtual host names, each going to different distinct configurations (e.g. with different DocumentRoot, Alias, etc), and also do this for the IP address so that it goes to a designated configuration rather than defaulting to the first or a random host name?
Apache documentation does not appear to address this. If so, it has it hidden in a non-obvious place.
I have been searching and reconfiguring for 6 days now and have lost several clumps of hair.. PROBLEM: I want 2+ virtual hosts on my ubuntu server (1 ip) BUT - Only the first "alphabetically" listed sites-enabled shows.
000-default
[URL]
Individually they all work (if i a2dissite for each leaving 1)
[Code]....
it seems i have tried everything that everyone else is having issues with but nothing seems to fix mine. Possibilities:
1) EC2
2) Permissions on the files - I changed everything to the apache2 user "www-data" - no dice.
3) I am a dope...lets hope its that and one of you kind people point me to my issue.
Ok I have 5 virtual hosts on one IP but only 1 domain (forwardconference.org) will be sending emails out to people....confirmations and such. The other sites may send out some emails...like back to my personal email address not hosted on this server. That works. But to people on like aol or yahoo or hotmail....it doesnt
Problem is, most people are not getting the emails. Mailq reports them being deffered for some reason. I'm having our ISP setup a PTR to forwardconference.org....does this mean all my emails from either of the sites....even if I put a different FROM: address in the php mail script...will come from [URL]? Or should I just setup my server as its own SMTP server?
I run couple of sites on a virtual hosting environment and I am in need of adding additional SSL for a different domain name. From what I read on some forum topics indicate that SSL cert requires different IP address. meaning one cert for each IP. Is this true? If so, then I'm having some difficulties understanding the benefits of running virtual host if a server can't host multiple secured site through single IP. Any way to run multiple ssl site within virtual host environment. I'm hoping for a possible workaround.
View 3 Replies View RelatedI have several websites available via both HTTP and HTTPS, with images served from a separate virtual host. This breaks in IE because the images are loaded by the CSS, and because they're in a separate Virtual Host, I have to use absolute paths in the CSS.
Example:
[URL]
Renders in IE like this:
[URL]
The issue being that the wiki.archserver.org is being served via SSL, but the header logo is served by img.archserver.org and the CSS uses the absolute path [URL] to load the logo. So, the only solutions I can see are:
1) Change the CSS to always use SSL. This will slow down the site, increase load on the server and is generally a poor-practise as a "solution"
2) Maintain 2 copies of the CSS, serving a HTTP version to HTTP requests, and HTTPS version to HTTP. This creates a management overhead which is less than desirable.
3) Create an Alias in Apache to send requests for [URL] to [URL] internally then rewriting the CSS to use relative paths.
4) Screw IE; it works in Firefox, Chrome and every other browser AFAIK. The sites are for a Linux project anyway.
I am trying to create virtual hosts for each user on my server using Name-based virtual hosts and then make a symbolic link to /home/userdir/html
Here is what I have for my virtual hosts:
NameVirtualHost *:80
<VirtualHost *:80>
ServerAdmin tasha@ttu.edu
DocumentRoot /home/httpd
ServerName 128.118.118.7
ErrorLog logs/error_log
CustomLog logs/common
</VirtualHost>
What do I need to add to make it follow symbolic links in /home/userdir/html?
First of all I've looked at "similar threads" without finding an answer. I'm setting up Name-based VH using an IP as the base. The OS is CentOS 5.4
My config looks like:
NameVirtualHost 12.345.678.90:80
#
# NOTE: NameVirtualHost cannot be used without a port specifier
# (e.g. :80) if mod_ssl is being used, due to the nature of the
# SSL protocol.
[Code]...
The names are of course not in DNS so to access the server from my local Windows machine I had to use the hosts file: 12.345.678.90 dev1 Entering dev1 in my browser *does* take me to the server but it takes me to default VH (DocumentRoot /var/www/html). What am I overlooking?
I have just setup two Apache virtual hosts and I was wondering how I could link them to different domains so that they could be accessed from another machine.
View 7 Replies View RelatedThis really has me baffled! I'm running Apache 2.2 on Windows Server 2003 (I know, my first blunder). I can edit existing virtual hosts without a problem, for example, I can change this existing vhost to point to a different document root and it works fine:
<VirtualHost *:80>
ServerName existingsubdomain.mydomain.net
DocumentRoot "C:/Inetpub/wwwroot/mydirectory"
</VirtualHost>
But the moment I try to add a new virtual host, it doesn't get recognized! When I try to browse to it in a browser, I get a "Server not found: Firefox can't find the server at newsubdomain.mellemallc.net."
<VirtualHost *:80>
ServerName newsubdomain.mydomain.net
DocumentRoot "C:/Inetpub/wwwroot/mydirectory"
</VirtualHost>
Can anyone point me in the right direction as to why this may be happening?
I created LAMP server with a wordpress site. I created a sites-available file for the wordpress file pointing to the wordpress directory. Within my server it goes to the site properly. However I also made this server a DNS server, had another test pc use it as a DNS server and it only got the default apache page unless I added /wordpress to the url which makes it point to the directory within /var/www/ that it belongs, but then the wordpress links don't work and this is not what I want it to do anyway. I do not understand why it is working properly internally but not externally. It makes me think maybe the sites-available file is not allowing outside access appropriate permission to use it or something. Can somebody please point me in the right direction I have been working on this for weeks and I am starting to get really frustrated with it. Tell me what config files can help you figure out my issue. Also I eliminated the default index.html file so it wouldn't use it, then placed the index.php file from wordpress in /var/www/ root but in that configuration it doesn't load anything by default but will still work if you point to /wordpress. I believe I have to make some change to my apache2 configs to allow outside PCs to be pointed to the right root directory for the virtual host like is being done internally, I just don't know where to start.
[Code]...
I'm trying to set up my web server (nginx) as a catchall virtual host, as per an example that can be seen here: [URL].. (It's the Wildcard Subdomains in a Parent Folder example). Now, here's my issue. I use Wordpress on the coburndomain.org domain. I have pretty URLs enabled, that make my Wordpress articles look like this:[URL].. At the moment, nginx is reporting 500 Errors, saying that index.php is not a directory. What I want to do is make a rewrite rule that allows me to use the above URL example with nginx.
I followed this tutorial to do so: [URl].. , but I'm not sure how to apply it to my setup. Here's my configuration files from Debian Squeeze with Nginx onboard:
[Code]...
I am trying to run two web servers (Virtual Hosts) on a single Linux Centos 5.5 box with a single IP address 192.168.0.182. I did all the pre-installation requirements such yum install mysql, yum install mysqladmin, service httpd start, service mysqld start etc etc.In /var/www/html directory, I have two folder called server1 and server2. These two folders have the necessary web server php script files and folders. I opened the browser and managed to install the script on one web server successfully. When I put the IP address 192.168.0.182 on the browser address bar, the page loads without any problem. Now I would like to be able to install the other web server script and I don't know how to?Here is my httpd configuration;
<VirtualHost *>
DocumentRoot /var/www/html/server1
ServerName development.mysite.com
[code]....
We have a requirement to configure multiple email gateways, for mail accounts configured on linux server. the application will trigger mails (bulk mails) and we would like to configure multiple email gateway to be used.
we decided to do it this way.
In dns we would create MX records like
yourdomain.com. 3600 IN MX 20 realmailserver1.yourdomain.com.
yourdomain.com. 3600 IN MX 20 realmailserver2.yourdomain.com.
where realmailserver1.yourdomain.com. and realmailserver2.yourdomain.com. will be our email gateway.
and internally on our linux server (from which mail is sent) if i specify multiple smart hosts like
define(`SMART_HOST',`esmtp:realmailserver1:realmailserver2')dnl
Recently I've been earning money doing web development, php, html/css, MySQL and so on. What I have encountered a lot are clients that need a complete solution. They need their site built, but they also need a hosting solution. I've sent more than just a few clients off to GoDaddy, and quite frankly, I'd like to cash in on some of that.
It would do wonders for my business if I could offer them a hosting solution with full support on top of building their site. My problem is I have no idea how to do this. So I'd like to know how I can host multiple sites on the same server. Does anyone know of a nice guide I can follow to set this up? It's really important that I can add sites fairly easily over the internet. Since I will be away at school, I won't have direct access to the server
How to best manage both http and https pages on the same apache-server without conflicts. For example, if i have both 000-default.conf and 000-default-ssl.conf pointing to mydomain.com, and don't want users who visit mydomain.com without specifically type the https-prefix to be redirected to the https-page - how to handle users using browserplugins such as https-everywhere etc?
Another option would be to create a subdomain ssl.mudomain.com and have users who want to reach the ssl site to have to type ssl. I have tested several things with https everywhere enabled in my own browser, and it seems really hard to make this working the way i want, in one way or another i always end up getting redirected to the ssl-site automatically.
The reason i need this to work is because i run one site that i don't care much about SSL, that is the "official" part of that site, and i also host some things for friends and family on the SSL-part. This would not have been a problem if it wasn't that i use self-signed certificates for my ssl-site and the major user become afraid when a certificate-warning pops up in their browser and therefor leave the site.
I have 16 linux servers that use /etc/hosts files to see and talk with each other. I'm adding servers to this pool of servers. It is required to do host resolution via the /etc/hosts files. DNS or NIS are not alternatives. Aside from manually editing each of the 16+ /etc/hosts files every time I add a server or editing one /etc/hosts file on one server then scp'ing it to all the other servers, is there anyway to edit the /etc/hosts on one server and "push" it onto the other servers that need the new /etc/hosts file?
Everywhere I've looked on the Net, there hasn't been any suggestion except for the options I mention here.
Or am I just whistling in the wind?
I'm working on a side project where I would like to install three ubuntu server systems,each with only one task.So server0 would be the apache server, server1 would be the database and server2 would be the file server.which key terms I should be researching?
View 9 Replies View RelatedI've been trying to get my name-based server to work for a week now. I've read about everything there is and double checked my configs, but when I go to any of my sites, it always goes to the first virtual host.Here is my Webmin system info -Quote:
System hostnamelocalhost.localdomain
Operating systemRedhat Linux Fedora 11
Webmin version1.530
[code]...
I am having two domains. for ex: www.example1.com and www.example2.com. These two domains need to be hosted under one ip. Yes by configuring name based virtual host we can do that. But, my question is my first domain(www.example1.com) need to be hosted by Apache web server, and my second domain(www.example2.com) need to be hosted by Tomact. Is it possible to configure name based virtual host for a scenario like this.
View 6 Replies View Related
