Ubuntu Servers :: Puppetmaster Dashboard On Lucid Server?

Oct 5, 2010

Anyone have a tutorial to get puppetmaster and Puppet Dashboard installed? It is way over my head. Requires knowledge of ruby, apache2 passenger module, etc.

Quote: [URL]... Puppet Dashboard Overview The Puppet Dashboard is a web interface for Puppet, an open source system configuration management tool. The Puppet Dashboard currently displays reports with the detailed status and history of Puppet-managed servers (nodes), and can assign Puppet classes and parameters to them.

View 2 Replies


ADVERTISEMENT

Ubuntu Servers :: Disable Ctrl-alt-del On Lucid Server?

May 11, 2010

I would like to disable the ctrl-alt-del feature for a Lucid Lynx server.
i found some info on how to enable this in desktop environments, however nothing explaining how to disable it for a server.

View 3 Replies View Related

Ubuntu Servers :: Apt Pinning Not Working On Lucid Server

Jul 2, 2010

I want to pull a couple of packages from Debian Testing, but I can not get apt pinning to lower the testing repo's priorityI add the testing repo to the bottom of /etc/apt/sources.lst.I then add this in /etc/apt/preferences but when I do 'sudo aptitude update' and then 'sudo aptitude full-upgrade', it wants to upgrade all packages to the versions in debian testing.

View 5 Replies View Related

Ubuntu Servers :: RAID AFU / Server Won't Boot After Upgrading To Lucid RC1?

Apr 22, 2010

Ran 'do-release-upgrade -d'on my server running Hardy.No problems during the upgrade.Rebooted after the upgrade completed, and I was presented with the new plymouth screen. This sucks for servers.It sat there displaying the logo for ~5 minutes.Hit CTRL+ALT+F1 through F8 and didn't see anything on the virtual consoles.Finally figured out that I had to hit ESC on the plymouth screen to actually see what was going on.It said /dev/sdi1 had problems along with /dev/md0.It sat there forever with no fsck status and no HDD lights blinking.

SysRq+REISUB and tweaked the boot parameter to remove 'quiet splash' and appended 'S' for single-user mode.Got the attached screenshot.The box has been sitting like this for ~15 minutes.Not entirely sure what to report a bug against at the moment. Plus the somewhat-new requirement of running 'ubuntu-bug' is pretty retarded in this situation. (Yeah, I know I can add some string to the URL to get around it.Why is it such a pain in the *** to report a bug?)I'm going to do some more digging to try and find out what is dying during boot.The new boot process is a bit of a mystery to me still, so if anyone has pointers or any devs want more detailed information,

View 8 Replies View Related

Ubuntu Servers :: Get Lucid Login Info Into A Hardy Server?

Jun 5, 2010

I have a new lucid server. When I login to it via ssh it shows:

Code:
Linux syn 2.6.32-22-server #36-Ubuntu SMP Thu Jun 3 20:38:33 UTC 2010 x86_64 GNU/Linux
Ubuntu 10.04 LTS

[code]....

View 3 Replies View Related

Ubuntu Servers :: Set Up Opendkim And Postfix On Lucid Lynx 10.04 Server?

Jun 14, 2010

I just installed opendkim but I have no idea how to set it up.

View 2 Replies View Related

Ubuntu :: Add Widgets Only On The Plasma Dashboard?

Jun 30, 2010

whenever i add a widget on the plasma dashboardit shows on the default desktop container tooi would like to know how i can add widgets only to the dashboard

View 1 Replies View Related

Ubuntu :: Dashboard Labels Appear Scrambled

May 5, 2011

I just upgraded to Ubutntu 11.04 64 bit, using the default Unity setup. Everything seems to work fine apart from labels on the dashboard, about half of them appear scrambled. When I press the Ubutnu icon on the top left some of the text is also scrambled. I have an integrated Intel graphics card.

View 2 Replies View Related

Ubuntu :: Can't Type In Dashboard Search On First Load

Jul 1, 2011

I was wondering if anyone knows why I can't type in the search area in Dashboard search? It feels like it hangs or freezes when I try to load it for the first time during the day, icon shortcuts are also unclickable. I thought it was my keyboard, so I checked if I can type in other programs while Dash stayed open and I can so it's not my keyboard. This problem seems to go away if I exit Dash and try again, but returns maybe an hour later. I think it showed up when I installed Compiz and made a few adjustments.

View 1 Replies View Related

Ubuntu Servers :: Lucid: Mailgraph + Dspam - X Suexec - "500 Internal Server Error"

Jun 17, 2010

I am setting a Lucid mail server, and got dspam and mailgraph installed. dspam requires suexec module for apache, but it breaks mailgraph with "500 Internal Server Error":

[Code].....

View 1 Replies View Related

OpenSUSE :: One Widget Dashboard For Many Virtual Desktops

May 20, 2010

I am running an opensuse machine with 6 virtual desktops. I would like the 6th virtual desktops to share the common widget dashboard.

View 1 Replies View Related

General :: Physically Adjust Position Of Dashboard?

May 29, 2011

I'm new to the Linux OS, and this is also my first post on this form. My question is Can you physically adjust the position of the dashboard? I'm familiar with Mac OS X where you could "Physically" adjust to the top, left, right or originally at the bottom. Is it possible and if it is, can someone explain to me the process on going about that?

View 7 Replies View Related

Ubuntu Multimedia :: Dashboard Type Plugin For Rhythmbox That Shows On Main Screen

Nov 29, 2010

What I am looking for is a dashboard type plugin for Rhythmbox which will show on the main screen ...then (because of the small size) I can use VNC on my Android Phone to see what is playing and to change songs etc.

View 3 Replies View Related

Ubuntu Servers :: Install Bugzilla 3.6 On Lucid 10.4?

May 7, 2010

How to install Bugzilla 3.6 on Ubuntu Lucid 10.4 through the Advanced Packaging Tool(apt-get install) ???

View 4 Replies View Related

Ubuntu Servers :: Lucid Won't Install In Virtualbox?

May 25, 2010

I'm trying to install 10.04 server into a virtual machine using virtualbox. When I start the virtual machine and try to install using the server ISO, I get the following error:

Code:
This kernel requires an x86-64 CPU, but only detected an i686 CPU. Unable to boot Here is my cpuinfo from lshw:
Code:
*-cpu:0
description: CPU
product: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+

[Code]...

The host OS is 32bit Lucid Lynx desktop, and virtualbox works fine with a Win7 guest. Does anyone know why this might be happening?

View 6 Replies View Related

Ubuntu Servers :: Karmic -> Lucid Not Booting?

Jun 6, 2010

server configuration: SCSI 36gig -> sdd; boot and root as it was first in the box;2 IDE hard drives -> sda/sdb for data; and1 SATA drive -> sdc for data.After upgrading to Lucid (not right away, but a bit later), it stopped booting:'Gave up waiting for root device.'ALERT! /dev/disk/by-uuid/........... does not exist. Dropping to a shell!(initramfs)Happily, pushing ^D let it resume booting, but it kept repeating. After some study, I found the Lucid release notes that said "if you upgrade to ext4, you have to manually update Grub". A quick check showed that sdd was now, indeed ext4 - nobody told me! And, why couldn't it update Grub by itself? But, I dutifully ran grub-install and life went back to normal.

Until last night, when I updated the kernel, etc. with apt-get and restarted, and grub dropped dead:More googling turned up this solution, which I used with an install CD:http://tinyurl.com/2dhswzzWhich worked, but it brought back the first problem, and running grub-install doesn't fix it. So, what do I do now?

View 5 Replies View Related

Ubuntu Servers :: How To Install OpenSSL 0.9.8l On Lucid

Jul 28, 2010

I'd like to upgrade libssl to 0.9.8l version on my Lucid-based server, because of CVE-2009-3555 - they say that 0.9.8l disables SSL renegotiation, fixing the security issue. But there is no 0.9.8l in Ubuntu repositories - only 0.9.8k-7 is available. how can I upgrade this library? BTW. it is really strange why such significant security fix is not available in Ubuntu repositories. why it is not available?

View 9 Replies View Related

Ubuntu Servers :: NIC Bonding With Lucid/Maverick

Oct 14, 2010

How to bond NICs in Ubuntu server 10.04/10.10 correctly.

I installed ifenslave-2.6 on a fresh install. Then I tried going into the /etc/network/interfaces file and adding a new entry for bond0 to the file and adding bond-mode 6, bond-miimon 100 and slaves eth1 eth2 to the end of the bond0 config.

That did not work, it keep telling me it cannot bring up the interface even after a reboot it still does not work.

I also followed some tutorial I found online about editing /etc/modprobe.d/aliases

That did not work really well either, the interface came up but had no slaves.

Can anyone give a clue or a current method to bond interfaces in the 10.04/10.10

View 9 Replies View Related

Ubuntu Servers :: Downgrade From Maverick To Lucid?

Nov 9, 2010

I'm trying to setup a server for my home office, But I heard that using Maverick is not for office purpose and asked me to use Lucid instead.Should I download the Lucid version install it or do direct downgrade to Lucid?

View 4 Replies View Related

Ubuntu Installation :: Upgrade From Ibex Server To Lucid Server With Matrix LSA?

Jul 7, 2010

I have a dedicated server with Fasthosts. It's currently running Ubuntu Server 8.10 and I want to update it to 10.04.

The only issue I have so far is it runs Matrix Server Appliance 2.0-38

Does anyone know if this will be affected by the upgrade in a bad way?

I have had no luck finding a site for Matrix or any other information.

For the upgrade itself, I was hoping to run do-release-upgrade.

View 2 Replies View Related

Ubuntu Servers :: From OpenSuSE11 To Lucid: Website Not Working

May 13, 2010

I googled around and can't seem to find the solution to this problem... Ok, I have a server that used to run openSuSE until last week . From it, I ran my shop's website as well as a dokuwiki installation in the same folder as the basic web site:

- DocumentRoot is /var/www/htdocs
- The wiki is /var/www/htdocs/dokuwiki

So, this worked: [URL] Than I move to 10.04 Server... I transfer my web material into /var/www/htdocs, modify the default config in sites-availables and restart apache. What I now see:

[Code]....

View 2 Replies View Related

Ubuntu Servers :: Lucid: Starting Tomcat6 On Well-known Ports?

Aug 4, 2010

I've installed Sun Java, tomcat6 and tomcat6-admin on 10.04 server 64-bit. By default, tomcat is configured to run as the tomcat6 user. Everything runs just fine on tcp/8080 as initially configured. Modifying the connector port in /etc/tomcat6/server.xml to anything below 1024 (e.g. port 80) results in:

SEVERE: Error starting endpoint
java.net.BindException: Permission denied <null>:80

This all begs the question... do you *really* have to run tomcat as root to bind to a well-known port? I.e. is there really no way for tomcat to start as root, bind to a privileged port and then drop privs?

View 6 Replies View Related

Ubuntu Servers :: Install 32-bit Firefox 3.5.11 With Sun Java 1.6.0 On 64-bit Lucid 10.04?

Sep 9, 2010

Is there a proper way to install 32-bit Firefox 3.5.11 with Sun Java 1.6.0 on 64-bit Lucid 10.04 Ubuntu? I want to run VMWare guest on Lucid and 64-bit Firefox 3.6.9 has issue with VMware.

View 3 Replies View Related

Ubuntu Servers :: Migrate SVN Repository From Dapper To Lucid?

Sep 28, 2010

I have a (very old) svn repositoy on an ubunta dapper machine. I want to switch to another machine with lucid running. I simply want to "copy" the whole repository to the new machine. I've tried several ways, but the most succesful one was to do a dump on the old machine, copy the file to the new machine and do a load there. The repository has about 28.000 revisions. At revision 3130 it stopped with an error saying some path was not in UTF-8. I tried running a UTF-8 migrationtool on the dapper machine but this told me all files were UTF-8 compatible already. I am really stuck, even a two and a half hour google session didn't provide any answer.

edit: more specific, the error I get is:

Quote:

svnadmin: Path 'beginofpath?218tabase' is not in UTF-8

The end should have been /database instead of ?218tabase. When I look in the revision on the dapper machine this path shows a square at that location, so this is wrong also. When I try to open the dumpdile in gedit I get an errormessage saying:

Quote:

Could not open the file /home/usrname/repo.svndump using the Unicode (UTF-8 ) character encoding

When I change the encoding I get the same error for that encoding.

View 1 Replies View Related

Ubuntu Servers :: Unable To Setup VirtualBox 3.2.8 On Lucid

Oct 2, 2010

I am trying to set up Vista on my Lucid within VirtualBox so I can run 3CX IP PBX. I have installed the virtualBox and set up a virtual space called "Vista", but when I start it (Power on) I get an error message - see screenshot enclosed. If I run the command

HTML Code:

'/etc/init.d/vboxdrv setup'

as instructed in terminal I get.

HTML Code:

root@server:/home/server# /etc/init.d/vboxdrv setup
WARNING: All config files need .conf: /etc/modprobe.d/dahdi, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/dahdi.blacklist, it will be ignored in a future release.

[code]....

View 9 Replies View Related

Ubuntu Servers :: Mixing Both Hardy And Lucid Repositories?

Jan 24, 2011

I have Ubuntu Server 8.04 (LTS) installed and running well, but there a few packages that I'd like to upgrade, without upgrading the entire system (e.g, apache2). Is it possible to include both the Hardy (8.04) and Lucid (10.04) distributions in sources.list? Is that even safe? By the same token, can I add a Maverick repo to my list? I'm using "apache2" as an example, but this is more of a general question.

How should situations like this usually be handled, when only a select few packages would profit from an upgrade that resides in a different Ubuntu release?

On a similar note, is it possible to install two different versions of the same package using the APT tools? Let's say I want two different versions of php5 -- how would I go about doing that?

View 2 Replies View Related

Ubuntu Servers :: Lucid Logrotate Apache2 Error?

Apr 26, 2011

My apache2 logs aren't being rotated, I have 1 log nearing 100MB in size.

Error shown below when a logrotate happens on apache2 logs:

Code:
error: other_vhosts_access.log:5381 unknown option 'jack' -- ignoring line
error: other_vhosts_access.log:5381 unexpected text
"jack" is a sub-domain.

View 1 Replies View Related

Ubuntu Servers :: Page Load Hangs After Lucid Upgrade

Apr 30, 2010

I just upgraded my server from 9.10 to 10.04. I have ISPconfig installed on it and worked like a charm until the upgrade. Now when I point a browser to my site the page just hangs as if it is trying to load it but I never get an error nor does it load the page. I have tried to restart apache using /etc/init.d/apache2 restart in which I receive an fail error:

root@ubuntu:~# /etc/init.d/apache2 restart
* Restarting web server apache2 (9Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down

[Code].....

After this I still get the same results when trying to load the page in the browser.

I cannot load anything in the www root or virtual host files.

View 4 Replies View Related

Ubuntu Servers :: Amanda Backup Lucid Lynx 10.04 Installation?

May 11, 2010

After my 8.04 debacle here:I basically gave up on trying to write an install guide for Hardy and Amanda. Others had done it better and with how muddled I was by the end of getting a working server, I wasn't sure I could repeat it.Now in Lucid, I've managed to get another working amanda server going, I'm fairly sure I can repeat it and but I question:Installation with 'apt-get install amanda-server' uses the user backup in the group backup.Installation of the ZWC client uses the user amandabackup. while thankfully ZWC has included reg keys:

HKEY_LOCAL_MACHINESOFTWAREmandaWC1.0Install BackupUserHKEY_LOCAL_MACHINESOFTWAREmandaWC1.0Install RecoveryUserto change the user on the client, this is messy, requires regedit (which normally is locked out by group policy), editing the service in service.msc and creation of a new user account named backup in addition to the installer's default on each client.The actual question is:1) Is there a reason for the use of backup:backup? (rather than amandabackup:disk or amandabackup:backup)
2) Is there any sort of flag that could be set, script to change the user within the repo atinstall time.Or generally an easier way of doing this than compiling each time I do an install.

View 1 Replies View Related

Ubuntu Servers :: Lucid Slow Throughput To Windows Machines

Jun 16, 2010

Having finally got Samba shares and printer shares working on my Lucid Lynx server, I've noticed that the throughput from/to those shares is very slow to what I was used to when I had those shares on a W2K server.Having Googled this problem, I noted that there was a known issue with this in Karmic (believe Brian Wu was looking at it). However, I don't see any results in Google as to this being a problem in Lucid.

I know ipv6 can cause a problem in this regard but having issued the command:
lsmod | grep inet6
I know that ipv6 is indeed disabled on my Lucid server. Any further information on whether the error reported in Karmic still applies in Lucid, and can this be addressed in any way?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved