Ubuntu Servers :: Getting Gitweb To Work With Gitolite?
Oct 17, 2010
I've been trying for the last week to get gitolite and gitweb running on my ubuntu 10.04.1 Server (with Apache and OpenSSH selected on install).gitolite is working fine i installed it from the git and created a user git which has all the repos lying in his home directory.
I've been trying various guides to setup the gitweb interface but they never seemed very clean nor did they support configuriong access rights for gitweb in the gitolite.conf Also i would like to enable the daemon too and configure its rights in the gitolite config. (haven't looked into that because i need the gitweb first) essentialli what i want to do is programm with some people with different rights on a projekt (gitolite) and publish it's status when its ready on the web (gitweb) and also give a quick download possibility (git-daemon)
View 1 Replies
ADVERTISEMENT
Feb 6, 2011
I'm not to sure this is the place I should post this, but couldn't find any place for it to fit. So here is the deal..I am running 10.10 with the standard LAMP setup. I am running a drupal 7 site no problems. What I need to do is run a multi site sub directory. (domain.com/newsite). So far the best I can do is get a directory index of the second site (domain.com/newsite), but cant run the installer. (I did the symbolic link to the doc root of the drupal install.)If I type in the url domain.com/newsite/install.php I get not found. I placed an index.html test page and it renders fine. I think I'm close but just not there yet.
Any ideas from anyone? I can get Sobdomains to work fine on a test mache, but sadly I need the domain/site to work due to lack of DNS support at the moment. I tried to get some info from the drupal forum, but everything always points to subdomin setups. I also posted over there, but it seems like the forums have very little support and are a bit on the slow side.
[Code]...
View 9 Replies
View Related
Feb 5, 2011
I have the system setup and working, but I want to put it in a corner and forget about it. Problem is, nothing starts running unless I'm logged in. And if I log out, everything stops again.It's running a LAMP server and has VNC and SSH servers as well. I want all of that to start without having to log in. That way I can remote reboot without worries and connect and login with either VNC or SSH.Everything seems to have an entry in /etc/init.dIs the way it's acting normal behavior? It's a fresh install, then I installed everything I needed from the repos.
View 7 Replies
View Related
Sep 3, 2010
I am using Ubuntu 10.04 server with apache 2. I have set up a virtual server for the web server. I got the MySQL database working and PHP working. I just can not get my CGI scripts to run. I have 2 different systems set up and I can not get the CGI to work on either.
This is what I have:
Per-Directory Options
Directory /
Directory /var/www/
Directory /usr/lib/cgi-bin
Directory /usr/share/doc/
[Code]...
This give me a "Not Found" I have the cgi script chmod at 755 and I have tried 777. If I put a copy in /usr/lib/cgi-bin/ I get an "Internal Server Error". The script works find on the Host Gator server. The top of the script has "#!/usr/bin/perl" I know this is correct too.
View 5 Replies
View Related
Feb 3, 2010
I followed the steps here: [URL]
It works fine, except every time I try to do something that requires authentication of the key, I have to type in the password in a prompt that looks like this:
Code:
$ git pull
Enter passphrase for key '/home/<user>/.ssh/id_rsa':
remote: Counting objects: 16, done.
remote: Compressing objects: 100% (9/9), done.
remote: Total 9 (delta 7), reused 0 (delta 0)
...
This is very annoying. How can I have it so I don't have to enter my password each time?
On my local machine I followed the same instructions and don't have to enter the password every time...
View 4 Replies
View Related
Apr 24, 2010
I cant get to my phpmyadmin on xampp I tried doing it on the terminal but i get this wierd message
XAMPP: Another web server daemon is already running.
XAMPP: Another MySQL daemon is already running.
XAMPP: Starting ProFTPD...
XAMPP for Linux started.
But i cant get in phpmyadmin What can i do linux pros?
View 5 Replies
View Related
Jun 3, 2010
Today, after upgrading kernel to version 2.6.32-22 (linux-image-2.6.32-22-server) all my KVM guests stopped working. I could not reach the guests over (bridged) network or connnect to the guests with virt-mangager (well, I could but all i could see was black screen). I was able to reproduce the issue on my second server.
Reverting to kernel 2.6.32-21 resolved the issue.
View 2 Replies
View Related
Jul 23, 2010
What is wrong with the Ubuntu installer? I am trying to install 10.04 Server from either a USB CD-ROM or a USB memory stick and no matter what I try (and I've tried every trick I've been able to find so far). I regularly install other OS's using these methods without any problems or workarounds required. Why is the Ubuntu installer so screwed up?
When I try to install from USB CDROM the installer boots, asks me all those keyboard questions, and dies at "Detect and mount CD-ROM". It askes me if I want to load CD-ROM drivers from removable media I've even tried various things such as using the command prompt to manually copy the iso to /root/ and mount the iso to install from... no dice.
So next I tried using the Universal USB Installer tool as outlined at http://www.ubuntu.com/desktop/get-ubuntu/download The USB stick is created and it will also boot up the installer as expected. This method stops at the same point as the USB CD-CDROM. Other than rip open the server and hack in an ide/sata CDROM drive (there's no room for one), what does one have to do to make this work?
View 9 Replies
View Related
Aug 3, 2010
I'm trying to get WOL to work on my web server built on an ASUS P4A800D-X motherboard (which supports wol).I have it enabled in my BIOS and I've tried several different tools with no results, including my dd-wrt based router which has this functionality built into the firmware.All the guides I've read say it has to be enabled in the driver settings in the Windows Control panel before it will work, but I'm running Ubuntu Server 10.04.
Is there any special steps that must be taken in the OS to enable my web server to power on from the LAN? I've never used this feature before and would like to just shove my web server in a corner some where and have 100% remote control from my main PC.
View 1 Replies
View Related
Sep 24, 2010
I am building a new server on Rackspace Cloud. When they create an instance, it is a raw install. I have several other instances running Ubuntu 10.04 with vsftpd running just fine.But I have an app that doesn't like php 5.3 so I created a new server instance with Ubuntu 9.1 and php 5.2.Here is my problem... I install vsftpd EXACTLY the same way I've installed it dozens of times on Ubuntu 10.04. But when I try to access it, I get an ERROR 500 "vsftpd: cannot locate user specified in 'ftp_username':ftp. I'm SURE I'm using a valid username & password.
View 1 Replies
View Related
Jul 30, 2011
I was with hostgator before that provided cPanel and i "believe" they used CentOS.Now that i have moved to a different host, unmanaged, i installed copy of ubuntu 10.04 LTS 32 bit.the website is www.terwax.com.I have to put files under /var/www. So i put all the files there, including index.html (a file of joomla), but if you see the website yourself, it shows up blank page with some weird stuf
View 9 Replies
View Related
Jan 21, 2010
I don't know if I'm posting in the right box - I'm new to both Ubuntu and this forum so please bear with me. Thing is, I spent almost 2 days trying to find a web server that meets my likes. I tried like almost every well known web server, be it Apache, Lighttpd, Nginx, and Cherokee, one by one. For each I was successfully in getting PHP up and running, but was never able to configure the virtual hosts.
I'm 99.99% sure that I - for multiple times - followed correctly the online how-to's. Especially Cherokee, I did exactly the screencast (which is just 2 steps, as Cherokee has a GUI for virtual server setups). Strange enough, with each web server the virtual hosts thing never worked for me. I always received "Server not found" error. I tried with Firefox and Google Chrome. Currently I'm on an Ubuntu 9.10 (32bit) box - I reinstalled this one over the 64bit, to vain.
Don't know if it's a problem with my DNS, but I have another machine running Windows 7 with the same DHCP settings (means same DNS and IP range). Virtual hosts work fine there on an XAMPP installation.
View 9 Replies
View Related
Feb 9, 2010
I'm a newb when it comes to linux operating systems so I'm attempting to get better through experience. I work for a web development company and we use Ubuntu for our operating systems (the programmers at least). Anyways, I'm trying to install LAMP services and get them working. I have all L.A.M.P. services installed... but Apache2 is giving me a problem. I have an .htaccess file installed in a directory under my document root. But Apache2 is not interpreting it. I have AllowOverride All on but I can't figure it out. I did make a bogus .htaccess file attempting to make apache give me a error, nothing.
View 2 Replies
View Related
Apr 7, 2010
then I connect into work through a secure vpn connection that used to be reasonably fast. Sometime in the last year or so it has slowed down dramatically as if they added a one minute delay between pages. Everything works fine otherwise. It's just slower. At work they use all microsoft software, server software, etc. and if I connect in my friend's laptop with Windows 7 it works quite well and the pages load quickly like my Kubuntu laptop used to. What I'm wondering is if this is some kind of compatibility issue between Windows explorer and Firefox browsers or just a sour grapes issue on Microsoft's behalf where they slowed things down on purpose?
My laptop system monitor readout:
Ubuntu
release 9.10 (karmic)
Kernel Linux 2.6.31-20-generic
GNOME 2.28.1
Harware
[Code]....
View 4 Replies
View Related
May 2, 2010
I can't connect to my ssh-server (on ubuntu 10.04) from any external address. The error in putty is "connection timed out". From my internal network, everything works fine, even if I select my external IP address and port in putty as the destination.
This is what I have done so far:
installed open ssh with the ubuntu server 10.04 cd
set up port forwarding (11041) in my router (seems to work ok, port is open according to "shields up")
configured ssh to use port 11041 in /etc/ssh/sshd_config
changed tcp and udp ssh port in /etc/services to 11041
enabled UFW and did sudo ufw allow ssh
[Code].....
View 4 Replies
View Related
May 28, 2010
I can't figure out how to get Calamaris to work. I'm using squid3, so I understand that there could be a problem with that, however I installed links for the logs, so that even though it uses "squid" it should work for squid3...
Code:
ls -al squid
lrwxrwxrwx 1 root root 7 2010-05-05 12:21 squid -> squid3/
I even tried going into the /etc/cron.daily/calamaris file, and changing squid to squid3... But when I run the crontask, it gives no output and there's no file in /var/www/calamaris. What's going on? I need a program to analyze computer bandwidth.
View 1 Replies
View Related
Jul 2, 2010
I do not know a lot about Ubuntu Servers, but I made one. I wanted to set up a web server using Apache and DynDNS. So far, I have created an account on dyndns.com and installed apache. I also installed another program (i dont remember the name) that had something to do with DynDNS. Right now, I can access the page on my server by using eLinks (text based web browser) and going to the address (myaddress.dyndns.org). If I try to access it from any other computer, I get a page that says 'Unable to Connect'.
View 1 Replies
View Related
Aug 23, 2010
I have set up an apache 2 server, but can't seem to get authentication to work properly. I have set up this in my apache2.conf:
Code:
<Directory /var/www>
AllowOverride AuthConfig
</Directory>
<Directory /var/www>
AuthType Basic
[Code]...
I have created the passwords file with htpasswd and defiantly have the right password for bob. However, when I try to log in the box just comes up over and over again and never authenticates. What am I doing wrong? I'm a newbie, so please bear with me if I've missed something really stupid.
View 4 Replies
View Related
Sep 7, 2010
I'm having a problem getting sieve to work with dovecot on 10.04. Even weirder, when I try to compile the following script with sievec
Code:
require ["setflag","fileinto"];
if header :contains "X-DSPAM-Result" "Spam" {
setflag "\Seen";
fileinto "Junk";
[Code]...
edit: found the mistake, should've required imap4flags instead of setflag.
View 1 Replies
View Related
Sep 11, 2010
I've been using curl in a script of mine for a while on Ubuntu 9.10, without problems.
Ubuntu 9.10 got the following curl installed through apt-get:
ii curl 7.19.5-1ubuntu2 Get a file from an HTTP, HTTPS or FTP server
[code]....
View 1 Replies
View Related
Oct 22, 2010
OK here's what I'm doing:
On terminal 1, I enter:
$ nc6 -vlp 5000
nc6: listening on 0.0.0.0 5000 ...
On terminal 2, I enter:
$ nc6 -v localhost 5000
nc6: ygt-asfandq (127.0.0.1) 5000 [5000] open
Now, as SOON as I make the connection on terminal 2, both netcats immediately quit back to the command prompt. The return code for both is 0.
I do not have ANYTHING in my firewall (I checked with sudo iptables -v -L)
I have attached a wireshark trace of the conversation..
View 2 Replies
View Related
Nov 1, 2010
I have a domain through google (enom) I have one website which I host web forums My friend has a website which he hosts the frontpage We're on two separate hosts We're trying to combine the websites together and my friend wants to utilize his hosting.Is it possible to get this one domain to work on two webservers without doing a redirect? For exmaple: have [URL] be the frontpage and [URL] be the forums
View 1 Replies
View Related
Nov 7, 2010
I have a kind of weird problem on one of our servers. The server software was upgrade a couple times now and it went from 8.04 to 8.10 to 9.04 to 9.10 to eventually 10.04Now I'm 100% sure the current version should be 10.04 but all of the sudden an 'apt-get update' does not work anymore, so I dig some further why that could be...A simple 'cat /etc/lsb-release' gives me this answer
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=8.10
DISTRIB_CODENAME=intrepid
[code]....
View 9 Replies
View Related
Nov 13, 2010
I'm something of a Linux noob I must say. I run a community centre and we've been donated 50 ex government PCs to use in basic computing classes. The machines are HP DC7600 CMT tower base units, all with Windows XP Pro license stickers and blank hard drives obviously. set up a Ubuntu machine to clone Windows XP Pro onto a load of identical machines?
I could install all of them from disk and install drivers from pendrive but that would take forever! I like the idea of seting one up as I like it and cloning it across the LAN. Would save a massive amount of downloading updates for each client too. So far I've followed this guide: [URL] I can only get as far as stating up the drbl service (if that is the correct term?) but the terminal says something along the lines of "unknown command"So far I have one fully built base unit to use as the image, one running Ubuntu 10.4 and a 16 port switch (so I can clone 14 at a time?)
View 9 Replies
View Related
Nov 27, 2010
I have added a domain to my new vps account but i notice that the website doesn't work with www so how can i redirect www.example.com to example.com. (bind9, apache2, webmin, ubuntu server 10.04 lts)
View 9 Replies
View Related
Mar 7, 2011
I want to make a daily backup of my websites from ubuntu server over ftp to another server I own. Backup schedule and process works, the problem is backup restore. Winrar says: The file is corrupt, 7-zip crashes.
Backup archive looks ok (the same size as original folder) and you can also extract it ignoring the error by winrar. But the extracted folder only contains one or two subfolder and one file(usually image) and that's all.
If I try to restore from Webmin it doesn't report any error, and it looks like restore worked. But restored files are nowhere.
View 5 Replies
View Related
Mar 7, 2011
how to get sound to work in FreeNX. After a couple of google searches I'm still stumped to as how I'm supposed to get it to work. The first thing that I'm wondering is: is it possible for a server system without a sound card to actually stream audio towards a client with the NoMachine NX Client (multimedia enabled)? If so then the problem gets a bit more complex. I've installed the ESD Sound Server and PulseAudio. But how am I supposed to do this configuration ? Whenever I go to gstreamer-properties I get the choice for ESD which I choose for my output and ALSA for my input. Still no sound. The configurationfile has been changed so that the libraries for ESD get loaded in /etc/nxserver/node.conf but also still nothing.
View 1 Replies
View Related
Apr 11, 2011
I have googled for hours and can not find an answer to what this means.
dig @172.16.255.254 twitter.com.
; <<>> DiG 9.7.0-P1 <<>> @172.16.255.254 twitter.com.
; (1 server found)
;; global options: +cmd
;; Got answer:
[Code]...
And I have a very long debuging log file I will not post unless requested. I also have added a ufw allow from all to all rule for testing purposes only.
View 6 Replies
View Related
May 19, 2011
Ive made a site on my Ubuntu server and link the folder where it is with VirtualHost. The problem is, when i place mypage.com works, when try www.mypage.com goes to the apache "It Works" page.
View 4 Replies
View Related
Jun 14, 2011
I run an 11.04 Server with Bind9, DHCP, Apache 2 PHP5, PostgreSQL8.4 and would like to install an FreeradiusServer. After I downloaded the packages with code...
View 1 Replies
View Related
