Ubuntu Servers :: VPN Connection To Work Is Slow
Apr 7, 2010
then I connect into work through a secure vpn connection that used to be reasonably fast. Sometime in the last year or so it has slowed down dramatically as if they added a one minute delay between pages. Everything works fine otherwise. It's just slower. At work they use all microsoft software, server software, etc. and if I connect in my friend's laptop with Windows 7 it works quite well and the pages load quickly like my Kubuntu laptop used to. What I'm wondering is if this is some kind of compatibility issue between Windows explorer and Firefox browsers or just a sour grapes issue on Microsoft's behalf where they slowed things down on purpose?
My laptop system monitor readout:
Ubuntu
release 9.10 (karmic)
Kernel Linux 2.6.31-20-generic
GNOME 2.28.1
Harware
[Code]....
View 4 Replies
ADVERTISEMENT
Jul 31, 2011
Im running Ubuntu 10.04, currently living out of the country from where my server is located. We have a 4 Mbps dsl connection that speedtests fine to the closest server, and if we test from our present location to the speedtest.net server closest to our server the speed is great as well. When I SSH in to my server and setup a socks 5 proxy the speed goes through the floor. We barely get .2 Mbs. Whether I use putty or terminal from our mac, they both get the same slow speed. I've searched the forums and google extensively, but I haven't been able to come up with anything yet.
View 2 Replies
View Related
Jul 19, 2010
firstly it took a very long time to display the browser.After the browser was working on my localmachine it took really long time to show the response.I am doing all this on internet and the server has bandwidth as 6Mbps and my internet connection has a speed 1Mbps what could be the reason for such a slow response.The same exists in case of Chromium is there a way to make it fast.Ubuntu 10.04 server edition and ssh2.
View 2 Replies
View Related
Jul 17, 2009
I am a convert from Ubuntu (9.04 kept freezing on my laptop; when it did work, many packages it seemed were outdated--ie only Eclipse 3.2, rdesktop was messed up [and apparently is also in Fedora]), and I am having some trouble with getting my wireless working.I am running Fedora 11.First off, there is a problem when trying to connect when using DHCP. NetworkManager gets to the second green dot, and then after a short while I am given a message that the connection was disconnected.
Configuring the interface manually, not using DHCP, allows the connection to complete. However, the internet is very slow. There is a 15-30 sec delay before website loading actually commences, and then another delay each time an ad must be fetched from another server.How can I fix this delay? I know I have encountered it in earlier versions of Ubuntu, but I can't remember how I fixed it.About the rdesktop problem, if anyone is able to help [maybe I should post another thread?], the cursor color (the color of the pointer) is inverted---where it should be white it is black, and where it should be black it is white. I use rdesktop a lot to connect to my terminal server in my basement. Any idea how to fix it?
View 5 Replies
View Related
Feb 10, 2011
I am running an Ubuntu Server on a VirtualBox VM running on my windows machine. So I've created a self-signed certificate using the following tutorial: [URL]
From this tutorial I'm left with 3 files:
server.key
server.csr
server.crt
Then I found this very similar tutorial that has an extra bit on installing the certificates in apache: [URL] So I followed it's instructions which boil down to this:
[Code]...
So I'm thinking this should work now. However in Chrome I get: SSL connection error Unable to make a secure connection to the server. This may be a problem with the server, or it may be requiring a client authentication certificate that you don't have. Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error. IE8 gives me a typical "Internet Explorer cannot display the webpage" Note that [URL] fails while [URL] works fine, so it's definitely something in my ssl setup I'm thinking.
View 5 Replies
View Related
Sep 2, 2010
I have a Acer Aspire Revo 3600 running under Ubuntu 10.04
I have a 5 mb bandwith connection but when I'm doing a speed test its not even 1 mb and when im on firefox the web page are loading really slowly. The inbound traffic goes up and down too!
My girlfriend running on windows xp dont have any problem with the connection.
I disable the ipv6 of firefox and grub but it still doesnt change anything.
I'm not a linux expert so if you want any report juste tell me how to do it and I will try to give you more information.
View 3 Replies
View Related
Jan 9, 2010
I'm running Ubuntu Karmic on my desktop machine which is connected to my wireless router (via LAN cable).
I have two laptops on the LAN as well. One is my wife's Windows 7 laptop and the other is my Ubuntu Karmic laptop.
They both connect wirelessly to the LAN and all three computers have static IP addresses assigned.
So here's the issue. The desktop serves the laptops over the LAN with Samba file sharing, SSH, VNC and DAAP.
From the Windows 7 laptop, the connection over the LAN is fine. I generally use it to connect to the Samba shares and occasionally use it for VNCing to my Desktop's....desktop. It is fast and responsive.
From the Ubuntu laptop though, everything seems very slow. Connecting to the samba shares results in a wait of at least 30-60 seconds, even if they have only recently been accessed. Once it has connected (i.e. once the share opens up and you can see files) actually opening the files themselves is delayed too, but not to the same extent.
Also, connecting to the desktop via VNC is intolerably slow, with mouse movements being so delayed that it is almost impossible to click on anything.
SSH takes a long time to connect too (up to 30 secs) but obviously once connected it is fine. In a similar vain, FreeNX connection takes a long time to connect but once the desktop has loaded it is fine too.
I can use FreeNX instead of VNC but actually like using both for different functions. I understand VNC is slower than FreeNX but over a 100Mbps LAN connection I wouldn't expect it to be slow at all.
This laptop used to be a Windows Vista/Win7 laptop prior to being replaced with Ubuntu and it was able to connect to the server with no speed problems.
View 1 Replies
View Related
Sep 30, 2010
I have dual boot OS and I'm using Ubuntu with Win 7. Previously I was using Fedora but I thought to change the flavor! So I installed Ubuntu, but now I'm truly facing problem with my Internet connection! Its too slow in Ubuntu, the both surfing and downloading speed! Usually in windows I get 200-400 kbps download speed when downloading a file and if I download the same file in Ubuntu using flashget I'm getting only 60-70 kbps speed! Also the surfing is too slow! My broadband's bandwidth is 2.1 Mbps!
View 2 Replies
View Related
Feb 4, 2010
I have a Compaq Presario CQ61, instaled Ubuntu 9.10 and Windows 7 on it.
It works great except the PPPoE connection in Ubuntu, when i dial in Windows my download speed reach up to 91 Mb, rebooted in Ubuntu, downloaded same file from the same server with a speed of maximum 3 Mb, cheked in Windows again 80 - 90 Mb constant. I can't figure what slow's the internet connection in Ubuntu.
(NO iptables configured, NO HTB, CBQ ...etc configured) .
EDIT: I don't have any modem or router. I am using PPPoE directly from my PC. I didn't mentioned that I instaled Ubuntu two times but didn't figured out what was causing the problem, so I instaled Fedora 12 (64), this works fine and the speed reached 85 Mb. I instaled latest Ubuntu 10.4 on the same Laptop, the problem is not solved, the speed reaches up to 3Mb, when in Windows or Fedora reaches up to 95 Mb (yesterday).
View 2 Replies
View Related
Jan 11, 2010
I've just installed the ubuntu 9.10. I have one problem with it. I have a home net in configuration: Windows XP on a cable, Ubuntu on a cable and Windows on wifi. When I'm surfing on the net on Ubuntu, Wifi isn't work how it should. It's very slow and I don't know what to do with it. Windows XP on a cable is OK, it works good. What happen and how can I repair it?
View 2 Replies
View Related
Mar 23, 2010
Like the title, that is my problem. I'm using cable modem with 3mbps. It is Linksys Docsis, wired networking. When I download a file using ubuntu 9.10, my latency time (ping time) sky rocketed to 2000ms average, while in XP none of this happens; I tried to download the same file from the same website. In ubuntu 9.10 my network setup will be, well... nothing. I'm using DHCP automatic detection. Same thing in XP.
I don't want to go back and forward using XP for the internet. Funny thing though, none of this happens while I first started ubuntu 9.10. I didn't configure anything with networking. It is the way it is from the beginning. The only thing I tried was ubuntuone. But that like months ago, and the problem I have with slow internet connection only appear this March.
View 9 Replies
View Related
Apr 30, 2010
Since I've updated from 9.10 to 10.04, I'm having some difficulties to use the internet. Even though I can connect to my home wireless network, the connection is really slow. I've got a Dell Inspiron 1545, and here comes the configuration:
Code:
sussa@sussa-laptop:~$ sudo lshw -C network
[sudo] password for sussa:
*-network
description: Wireless interface
product: Wireless WiFi Link 5100
vendor: Intel Corporation
physical id: 0 .....
Apart from that, I must say that Ubuntu 10.04 is fantastic. Easy to use, elegantly designed and working perfectly on my PC
View 9 Replies
View Related
May 10, 2010
Lately I have been using my window's partition due to the fact that 10.04 drops my wireless signal every 5-10 minutes, but today I downloaded the new updates and that seems to have fix the issue with the dropping of the wireless connection. Now the only problem is the internet is so slow when trying to go to webpages it times out. I have opened up firefox gone to about:config and changed the necessary lines, but still dreadfully slow.
View 2 Replies
View Related
May 21, 2010
I am running Kubuntu 10.04 (32-bit) on a Sony VAIO VPCCW23FX, when I connected to my router through Wireless the connection is too slow and random, 3 kB - 50 kB. But when connect to the router through Ethernet cable I get the normal speed 265 kB. I read many posts but can't find solution, and already updated all packages. the Wireless card is:
Code:
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
the output of iwconfig:
Code:
wlan0 IEEE 802.11bgn ESSID:"zzzzplw9"
Mode:Managed Frequency:2.437 GHz Access Point: 00:25:68:9B:0D:FE
Bit Rate=1 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
[Code].....
View 9 Replies
View Related
Jul 5, 2010
After upgrading, my internet connection is very, very slow. Some sites pop up like always, but most take a very long time to load. Some as much as 3 to 5 minutes for a site that should just "pop" up.
It is not the internet connection, if I boot into windoze it is as fast as ever and I have a quite fast connection. It has just started this with the upgrade.
View 5 Replies
View Related
Oct 8, 2010
It has a button next to the power to show the wireless status, on or off. If I turn the laptop on with the wireless active, it keeps flickering between on and off states, and gives me a really slow connection.It happened in 10.04 if I booted with the wireless activated, but could be fixed by resetting the wireless. Now in 10.10, it happens constantly, and I just wont stop.My laptop is a CompaQ Altec Lansing running 64 bit.
View 9 Replies
View Related
Oct 13, 2010
I am having problems with the wl driver for the BCM4322 on 10.10.
It seems with two different routers the connection is really slow and jumpy and web pages barely want to load. I have tried a usb wireless device, and it seems to work much quicker.
Is anyone else having problems with their broadcom cards with the new update?
10.10 64 bit. Using Broadcom restricted drivers (wl)
ifconfig :
Code:
eth1 Link encap:Ethernet HWaddr 0c:60:76:0e:35:07
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::e60:76ff:fe0e:3507/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code].....
View 9 Replies
View Related
Dec 12, 2010
I am using Ubuntu 10,04 with a gnome interface on an ASUS K70IJ. It all works well, just the internet connection is sometimes blocked or very slow. I have tried it on several places (offices, hot spot, friends) with wireless lan and ethernet. I thought it might be a problem with the pilot for the internet connection. Can anybody tell me where I could find such a pilot and how I do to install it?
View 1 Replies
View Related
Jan 29, 2011
I recently installed Kubuntu 10.10 on my machine, and I configured the PPTP VPN connection through which I connect to the internet. I can successfully connect, but it works really slowly. Slower than it does on Windows 7 on the same computer, with the same settings for the PPTP dialer. In about 20 minutes after I connect, the connection fails and even the modem restarts itself. I tried setting the MTU for the pptp connection to 1400 (I checked, and 1372 is the maximum value before the packets start to fragment + 28 bytes for the IP/ICMP headers), but nothing seems to help.
View 3 Replies
View Related
Jan 2, 2010
I recently installed ubuntu on my laptop and the wifi is horrible. The connection was very slow and dropped every 5 minutes or so. I have tried enabling the proprietary madwifi drivers - however then it wouldn't connect at all.
View 1 Replies
View Related
Mar 10, 2010
It may have something to do with my recent installation and removal of tor, but I can't narrow down when exactly it began. I'm getting no better than about 5000B/s download rates for apt. This means just a download of the package list takes a good 5 minutes. Other networking seems to run fine, but synaptic and apt are crawling.
View 5 Replies
View Related
Apr 5, 2010
I am currently staying on a university campus in Taiwan. Internet on Ubuntu Lucid 64bit here is often painfully slow, except for connections to Taiwanese websites. I dual boot with Windows 7, and there is no problem there. For instance, I downloaded the same piece of software (Spideroak) on both Win and Ubuntu, with Ubuntu I had to try repeatedly as the download would not complete, and in the end it took several hours to download. On W7, it took 10 minutes. What is Windows and Ubuntu doing differently?
I tried disabling ipv6 for this session by running sudo sysctl -w net.ipv6.conf.all.disable_ipv6=1, as a number of posts mention improving connection speed that way, but no effect.
I know that websites from Taiwan are working well, because I am getting my Ubuntu updates from a Taiwanese mirror: updates are fast, except for packages in the 'partner' repos (presumably not loaded from the mirror) which take hours to load, if at all. I don't want to depend on Windows for large downloads... (I don't want to depend on Windows for anything).
View 3 Replies
View Related
May 19, 2010
I upgraded to ubuntu 10.04 lts yesterday. The upgrade went smoothly. but now I have a very slow internet connection. It is as if I am on a dial up when I have a broadband speed of 20 MB. What can I do to fix or perhaps roll-back the installation to the previous proper working state.
View 3 Replies
View Related
Jun 5, 2010
Basically the problem is a slow download speed over my wireless connection that does not occur in Windows Vista. The reason I'm so annoyed is that the speed is not constantly slow. It bursts at around 600kb/s (good for my internet connection). The problem is that while trying to download a file it bursts for about a second,then total throughput decreases to +/- 1kb/s for a few seconds, then another burst and so on. Note the file I'm downloading is a http:// download, not p2p or anything. I've attached a screenshot of the System Monitor.
Screenshot-System Monitor.png
Some additional info. I'm using Ubuntu 10.04 with all available updates installed. The browser in use is Google Chrome.
View 9 Replies
View Related
Oct 27, 2010
I have Ubuntu running on my HTPC and for the longest time all this was working fine. Now all of the sudden my Internet connection is all sorts of slow. Chrome browser, transmission bt, apt-get, all have the same speed issue. I tried disabling IPv6, changing my DNS and installing all the latest updates. Nothing works.
View 1 Replies
View Related
Nov 30, 2010
I am running the newest version of Ubuntu on my laptop. The connection randomly seems to massively slow down. After a speed test is run it registers at .05 download and Ubuntu crashes before it gets to upload. I reboot from the crash and it runs fine for a while, then it suddenly does the same thing. The connection is running fine on my Windows 7 desktop, I don't know what is going on. In transmission the upload speeds are running at ~100kbps though. If I try downloading a mere 400kb .torrent file it stops half way through, usually at 200-300kb done, downloading at 1.2kbps the entire time. This is getting very frustrating and I really don't want to go back to Windows.
View 3 Replies
View Related
Jan 3, 2011
I bought a new Laptop 2 week ago. It works well, but internet connection ist very slow. I use cable internet speed 25Mbit/s, normal with my old Laptop (Window xp) I can DL with speeds ca.1 Mbit/s but with this new ca. 15 kbit/s (same file). too much different!!! If anyone know, how to troubleshoot this problem, please tell me. And i get a advice that i should crate a new connection using the "workgroup" model instead. I've tried to do but failed. Who knows "how to" please explain it for me.
View 3 Replies
View Related
May 12, 2011
I've installed recently Ubuntu 11.04 and the first problem that I had was with my wireless lan card Wl-138g V2. The card was not enabled by the system, however after following one of Ubuntu's forum thread I managed to solve it, but... and there is always a but the internet speed is very low.When I had windows installed I faced the same problem and it was solved with an update in the driver, does any one experienced the same in Ubunutu? How did you solve it?
View 4 Replies
View Related
May 2, 2011
I have a linux server that has seemingly random network slow downs. This server is mainly my dvr. I'm starting to think it's a hardware problem, but that's just a gut feeling. I don't really know how to determine if it isn't.
Slow summary:SSH, HTTP, VNC incoming traffic are all affected
Outgoing traffic seems ok. I haven't tested this as much.
Rebooting mostly helps.
Stopping/starting network doesn't help
Load average is below 1.0
Updated Kernel with no change
[Code]...
View 6 Replies
View Related
Dec 15, 2008
I use Slackware 12.1 and I have a big problem that I can't solve by myself. I'm connecting to a LAN where there are almost 20 PC connected, all with static IP.
my ip: 192.168.1.205
netmask: 255.255.255.0
gateway: 192.168.1.1
DNS server: 80.58.61.250, 80.58.61.254
I configured manually it but it doesn't works well. I set up the DHCP server on Windows 2003 so I tried to configure it with dhcp too. It gives addresses from 192.168.1.200 to 192.168.1.240 there are no PCs connected with DHCP at the moment, so my IP is only mine.
My problem is the following:
bash-3.1# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1e:68:3d:1b:ad
inet addr:192.168.1.201 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21e:68ff:fe3d:1bad/64 Scope:Link
Up Broadcast Running Multicast MTU:1500 Metric:1
RX packets:77 errors:0 dropped:0 overruns:0 frame:0
TX packets:44 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7041 (6.8 KiB) TX bytes:6282 (6.1 KiB)
Interrupt:17 Base address:0xc000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1810 errors:0 dropped:0 overruns:0 frame:0
TX packets:1810 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:90500 (88.3 KiB) TX bytes:90500 (88.3 KiB)
bash-3.1# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
localnet * 255.255.255.0 U 0 0 0 eth0
loopback * 255.0.0.0 U 0 0 0 lo
default 192.168.1.1 0.0.0.0 UG 1 0 0 eth0
bash-3.1# ping www.google.es
PING www.l.google.com (66.102.9.99) 56(84) bytes of data.
64 bytes from 66.102.9.99: icmp_seq=1 ttl=243 time=78.7 ms
64 bytes from 66.102.9.99: icmp_seq=2 ttl=243 time=84.2 ms
64 bytes from 66.102.9.99: icmp_seq=3 ttl=243 time=75.1 ms
64 bytes from 66.102.9.99: icmp_seq=4 ttl=243 time=82.1 ms
64 bytes from 66.102.9.99: icmp_seq=5 ttl=243 time=82.8 ms
64 bytes from 66.102.9.99: icmp_seq=6 ttl=243 time=79.4 ms
64 bytes from 66.102.9.99: icmp_seq=7 ttl=243 time=82.3 ms
64 bytes from 66.102.9.99: icmp_seq=8 ttl=243 time=75.2 ms
64 bytes from 66.102.9.99: icmp_seq=9 ttl=243 time=80.7 ms
64 bytes from 66.102.9.99: icmp_seq=10 ttl=243 time=84.7 ms
64 bytes from 66.102.9.99: icmp_seq=11 ttl=243 time=75.0 ms
64 bytes from 66.102.9.99: icmp_seq=12 ttl=243 time=82.2 ms
64 bytes from 66.102.9.99: icmp_seq=13 ttl=243 time=85.1 ms
64 bytes from 66.102.9.99: icmp_seq=14 ttl=243 time=80.9 ms
64 bytes from 66.102.9.99: icmp_seq=15 ttl=243 time=87.7 ms
64 bytes from 66.102.9.99: icmp_seq=16 ttl=243 time=87.6 ms
64 bytes from 66.102.9.99: icmp_seq=17 ttl=243 time=83.2 ms
(...)
- www.l.google.com ping statistics -
49 packets transmitted, 48 received, 2% packet loss, time 560804ms
rtt min/avg/max/mdev = 73.624/80.945/87.725/3.823 ms
It takes a lot of time connecting to a internet web site! It's really strange because downloading a file the transferring rate is good, it takes some time starting, but it works normally. I wait almost 7 seconds after seeing a web site. All the others PC's (windows xp) can connect perfectly to network using static and DHCP. Trying with another wire in another room I've got the same result. My /etc/resolve.conf is configured with the IPs specified upper in this page.
View 5 Replies
View Related
