Ubuntu Servers :: Squid3 - Calamaris Will Not Work
May 28, 2010
I can't figure out how to get Calamaris to work. I'm using squid3, so I understand that there could be a problem with that, however I installed links for the logs, so that even though it uses "squid" it should work for squid3...
Code:
ls -al squid
lrwxrwxrwx 1 root root 7 2010-05-05 12:21 squid -> squid3/
I even tried going into the /etc/cron.daily/calamaris file, and changing squid to squid3... But when I run the crontask, it gives no output and there's no file in /var/www/calamaris. What's going on? I need a program to analyze computer bandwidth.
View 1 Replies
ADVERTISEMENT
Mar 12, 2011
My home LAN (6 computers) is connected to a Dlink 624 router (192.168.0.1). All machines have DHCP addresses exception of the Ubuntu 10.10 box which has 2 NICs (192.168.0.198 and 192.168.0.199) with static IPs.
I've been spending hours reading stuff on Squid3 and I can't make it work, the client computers won't connect to the Internet.
What I'd like to do is a simple Squid proxy to cache the websites I access the most.
Would someone have in hand a squid.conf file compatible with my needs or suggest me another proxy product (with a GUI if possible,)?
View 2 Replies
View Related
Mar 8, 2010
I haven't found any updated instructions for adding squidguard to the new squid3 server. I tried following the old instructions for doing this, making changes to the text to point to the new squid3 locations, but this didn't work.
View 2 Replies
View Related
Jan 19, 2010
I installed squid on my machine, and for a while it was starting up automatically when the computer would turn on, and I would only have to reconfigure on ip-up for the new dns, etc.Now for some reason, I notice that squid isn't even started.To fix this, I wrote a start up script in /etc/rcS.d/ that runs:/etc/init.d/squid3 startAnd I notice it still isn't starting.So I write "/etc/init.d/squid3 start" and put it in my ip-up.d/ script.Everything in the script is being executed, but the squid server.I've tried reinstalling squid... what am I missing? where does the computer start these services?
View 4 Replies
View Related
Jul 14, 2010
I got squid3 installed on ubuntu server 10.4. I believe it is up and running as I can browse the internet on my other computers.I followed one of the tutorials on the net and looked at others for guide as well. Everyone of them did not mentioned that we have to create the swap files. Are we suppose too? I couldn't find the location of the swap file anywhere on the server.
View 1 Replies
View Related
Oct 21, 2010
I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines
Code:
And
Code:
eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT:
Code:
Code:
But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?
View 1 Replies
View Related
Sep 21, 2010
i configured Squid3 server in my Ubuntu 10.04.Now the ip based and content based blocking is working fine.Now i want to configured bandwidth allocation of ip address and group ip address..pls give the solution
View 11 Replies
View Related
Feb 3, 2010
I have Squid3 running and SARG for producing report. I would like to see the hostname being logged in the access.log file instead of the client IP address. I have already set the option log_fqdn=on and it doesn't do it. I still see the client IPs in access.log files...
View 4 Replies
View Related
Jan 23, 2011
I'm kind of new to squid. I've looked at the proxy server using squidclient and am getting
Seems like a lot of cache misses is this normal?
I know there is stuff in the cache
Internal Data Structures:
It's wierd because misses looks like more than requests. I don't know if I'm reading this right.This is just a proxy on a home network with about 6 clients connected.
View 3 Replies
View Related
Apr 14, 2011
How to compile squid3 on debian ?
View 1 Replies
View Related
Mar 17, 2010
New to opensuse, trying to set up cache proxy and webfilter at a highschool. I have a new install of opensuse11.2 64bit installed as server. Installed squid3 stable. Trying to configure it in yast2. Now in yast2-->networkservices-->squid I get the message squid needs to be installed, continuing with Next I get message unresolved dependencies then another that squid3 conflicts with squid-2.7. Solutions offered are deinstall squid3 or don't install squid-2. I select the latter and get messages that yast might not function etc. Isn't squid3 the newer version of squid-2? Should yast2 recognize that?
View 3 Replies
View Related
Feb 16, 2011
I am running suse11.3 32 bit, and have installed squid3.
As far as I can tell it's not been compiled with ipv6 support.
Or have I missed some option in some file somewhere?
View 2 Replies
View Related
Feb 18, 2010
I have a squid3 on a debian lenny box but cannot get access to any site.
If i remove the http_access deny all works, but i just want those ip to get access to squid
My squid.conf
Code:
intranet:/etc/squid3# cat squid.conf
acl manager proto cache_object
acl localhost src 127.0.0.1/32
acl to_localhost dst 127.0.0.0/8
#acl all src 0.0.0.0/0
[Code].....
View 3 Replies
View Related
Aug 3, 2010
I run a Squid 3 server that is acting as a web filter. It worked fine on Etch. The system stopped working properly due to two of the three SATA cables being bad. Before I figured that out, I tried doing updates. Since Etch updates were no longer available, I did a distupgrade to Lenny. Immediately, Squid stopped working properly. It would take up to two and a half minutes for it to respond to a web request and add it to the access.log. This was using the same configuration file that it was using before the update.
After I found the hardware problem, I did a clean install of Lenny. I used the basic squid.conf like I did on the previous system, only changing it to add my ACLs and because it wasn't saving an access.log to the default location unless I uncommented the path directive. Now, it won't respond to a request at all. Forwarding is enabled and the firewall seems to be set up correctly.
View 1 Replies
View Related
Jul 15, 2011
how to install squid3.1.x to block https sites?
View 1 Replies
View Related
Apr 3, 2010
I've setup Squid3 running on Ubuntu 9.04 64-bit server, and configured it to act as a transparent proxy and setup my router following these instructions: [URL]
Everything works great as far as browsing, but my main goal was to cache large downloads (usually executables) that I download frequently. So I set the minimum to 300KB and the max to 100MB. The problem, though, is the cache is not being used. I can download a file at regular speed on one computer, and then try and download it again and it downloads from the internet again, rather than the cache, so the speed is no faster.
Here's my config file:
Code:
#Recommended minimum configuration:
acl manager proto cache_object
acl localhost src 127.0.0.1/32
acl to_localhost dst 127.0.0.0/8
[Code].....
View 1 Replies
View Related
Feb 6, 2011
I'm not to sure this is the place I should post this, but couldn't find any place for it to fit. So here is the deal..I am running 10.10 with the standard LAMP setup. I am running a drupal 7 site no problems. What I need to do is run a multi site sub directory. (domain.com/newsite). So far the best I can do is get a directory index of the second site (domain.com/newsite), but cant run the installer. (I did the symbolic link to the doc root of the drupal install.)If I type in the url domain.com/newsite/install.php I get not found. I placed an index.html test page and it renders fine. I think I'm close but just not there yet.
Any ideas from anyone? I can get Sobdomains to work fine on a test mache, but sadly I need the domain/site to work due to lack of DNS support at the moment. I tried to get some info from the drupal forum, but everything always points to subdomin setups. I also posted over there, but it seems like the forums have very little support and are a bit on the slow side.
[Code]...
View 9 Replies
View Related
Mar 17, 2011
i have successfully set up squid3 with squeeze using guide on this forum viewtopic.php?f=16&t=59301 . The only problem that i have is the size of /var/log/access.log is too big and keep increasing so i run out of free space. The size of it always the same size as my free space hard disk (so it make me run out of free space in just one day, it can have size to 30 Gb ) right now , the only workaround i make is using crontab to rm access.log every hour . I'm sure this is not the right solution . Does anybody know the correct workaround about this ? I have searching in google but seems havent yet have luck with this .
View 5 Replies
View Related
Sep 29, 2010
i'am trying to configure Squid3 et SquidGuard on ubuntu Server 10.04 for a school. I'm new in linux, before i post this thread, I searched in the french forum and www. I found nothing to help me to resolve this issue. You can see below to configuration file from Squid3. which is stored in /etc/squid3/
[Code]...
View 1 Replies
View Related
May 20, 2010
I have squid3 proxy and I want to define a default start web site that will be opened force only one time. Is something like it possible?
View 4 Replies
View Related
Feb 5, 2011
I have the system setup and working, but I want to put it in a corner and forget about it. Problem is, nothing starts running unless I'm logged in. And if I log out, everything stops again.It's running a LAMP server and has VNC and SSH servers as well. I want all of that to start without having to log in. That way I can remote reboot without worries and connect and login with either VNC or SSH.Everything seems to have an entry in /etc/init.dIs the way it's acting normal behavior? It's a fresh install, then I installed everything I needed from the repos.
View 7 Replies
View Related
Feb 23, 2011
I am trying to set up my squid3 proxy as a transparent proxy - right now, I have to manually configure browsers to access via proxy. I understand that I have to put some rules into Iptables and also some further directives in the squid.conf.
I have a couple of specific questions. The proxy server is running on a Ubuntu 10.04 workstation and this machine also acts as a dhcp server for the network. I have just one subnet , namely 192.168.0.1-254 There is only 1 network card. Is it much easier to put in a second network card or is it just as easy to configure the existing lan card as a dual IP?
Is it necessary to configure these 2 IP's ( whether they are via 2 lan cards or dual IP on single card ) to be on different subnets. i.e ETH0 192.168.0.1 and ETH1 192.168.1.1 or is ok to have something like ETH0 192.168.0.1 and ETH1 192.168.0.254 ( where ETH0 is the one facing the LAN and ETH1 points to the modem router / switch i.e The Internet ) Where specifically do I save the Iptables rule configuration file and what must I call it ?
View 4 Replies
View Related
Sep 17, 2010
I actually have a server and a client.The client must connect to the server (via internet) to access to external websites. (You can see the attachment, maybe it's more clear )My actual problem is, I have configure Squid on my server, but I want to force SSL for the connection between the client and the server.I didn't really find nice tutorials about on that, maybe someone have an idea ? Or maybe some indications ?
View 1 Replies
View Related
Sep 3, 2010
I am using Ubuntu 10.04 server with apache 2. I have set up a virtual server for the web server. I got the MySQL database working and PHP working. I just can not get my CGI scripts to run. I have 2 different systems set up and I can not get the CGI to work on either.
This is what I have:
Per-Directory Options
Directory /
Directory /var/www/
Directory /usr/lib/cgi-bin
Directory /usr/share/doc/
[Code]...
This give me a "Not Found" I have the cgi script chmod at 755 and I have tried 777. If I put a copy in /usr/lib/cgi-bin/ I get an "Internal Server Error". The script works find on the Host Gator server. The top of the script has "#!/usr/bin/perl" I know this is correct too.
View 5 Replies
View Related
Feb 3, 2010
I followed the steps here: [URL]
It works fine, except every time I try to do something that requires authentication of the key, I have to type in the password in a prompt that looks like this:
Code:
$ git pull
Enter passphrase for key '/home/<user>/.ssh/id_rsa':
remote: Counting objects: 16, done.
remote: Compressing objects: 100% (9/9), done.
remote: Total 9 (delta 7), reused 0 (delta 0)
...
This is very annoying. How can I have it so I don't have to enter my password each time?
On my local machine I followed the same instructions and don't have to enter the password every time...
View 4 Replies
View Related
Apr 24, 2010
I cant get to my phpmyadmin on xampp I tried doing it on the terminal but i get this wierd message
XAMPP: Another web server daemon is already running.
XAMPP: Another MySQL daemon is already running.
XAMPP: Starting ProFTPD...
XAMPP for Linux started.
But i cant get in phpmyadmin What can i do linux pros?
View 5 Replies
View Related
Jun 3, 2010
Today, after upgrading kernel to version 2.6.32-22 (linux-image-2.6.32-22-server) all my KVM guests stopped working. I could not reach the guests over (bridged) network or connnect to the guests with virt-mangager (well, I could but all i could see was black screen). I was able to reproduce the issue on my second server.
Reverting to kernel 2.6.32-21 resolved the issue.
View 2 Replies
View Related
Jul 23, 2010
What is wrong with the Ubuntu installer? I am trying to install 10.04 Server from either a USB CD-ROM or a USB memory stick and no matter what I try (and I've tried every trick I've been able to find so far). I regularly install other OS's using these methods without any problems or workarounds required. Why is the Ubuntu installer so screwed up?
When I try to install from USB CDROM the installer boots, asks me all those keyboard questions, and dies at "Detect and mount CD-ROM". It askes me if I want to load CD-ROM drivers from removable media I've even tried various things such as using the command prompt to manually copy the iso to /root/ and mount the iso to install from... no dice.
So next I tried using the Universal USB Installer tool as outlined at http://www.ubuntu.com/desktop/get-ubuntu/download The USB stick is created and it will also boot up the installer as expected. This method stops at the same point as the USB CD-CDROM. Other than rip open the server and hack in an ide/sata CDROM drive (there's no room for one), what does one have to do to make this work?
View 9 Replies
View Related
Aug 3, 2010
I'm trying to get WOL to work on my web server built on an ASUS P4A800D-X motherboard (which supports wol).I have it enabled in my BIOS and I've tried several different tools with no results, including my dd-wrt based router which has this functionality built into the firmware.All the guides I've read say it has to be enabled in the driver settings in the Windows Control panel before it will work, but I'm running Ubuntu Server 10.04.
Is there any special steps that must be taken in the OS to enable my web server to power on from the LAN? I've never used this feature before and would like to just shove my web server in a corner some where and have 100% remote control from my main PC.
View 1 Replies
View Related
Sep 24, 2010
I am building a new server on Rackspace Cloud. When they create an instance, it is a raw install. I have several other instances running Ubuntu 10.04 with vsftpd running just fine.But I have an app that doesn't like php 5.3 so I created a new server instance with Ubuntu 9.1 and php 5.2.Here is my problem... I install vsftpd EXACTLY the same way I've installed it dozens of times on Ubuntu 10.04. But when I try to access it, I get an ERROR 500 "vsftpd: cannot locate user specified in 'ftp_username':ftp. I'm SURE I'm using a valid username & password.
View 1 Replies
View Related
