i tried to create a custom rules in /etc/mail/spamassassin/local.cf
[code]...
but amavis does not pick it up and still let the email pass through. What shall i do, in order to pick up the email as spam?
I'm currently running SUSE 11.1 and trying to start Amavis so I can use Kmail. I have just run the latest updates via Yast. I'm getting the following when I try to start Amavis: /etc/init.d/amavis start returned 7 (program is not running):
View 1 Replies View RelatedI am currently running Ubuntu Server 9.10 and followed this HOWTO on setting up my email server.
[url]
Everything seems to work correctly. If I look in the Maildir the emails I send to test are there.
The problem is when I try to sync my email via IMAP from my windows box (on a different network) it doesn't show any of my email nor does it deliver new email. My email app doesn't give any errors nor does the logs on the server.
How can I get it so my email syncs to windows computer? I am sure it is something really small that I am over looking but I can't seem to find it anywhere. I don't know if you need to see any of my config files but I can post them if needed.
im using postfix with amavis and spamassassin as spam/virus filtering and its working great.However, i get a "lot"(1-5/day) of "bad header" messages beeing quarantined by the server. And most of theese bad headers are false positives that i manually have to deliver to the correct mailbox.How can i make amavis/spamassassin deliver bad header messages to the correct mailbox and not place them in quarantine?Theese are my amavis settings. (which file is used, 20-debian or 21-ubuntu??)
View 8 Replies View RelatedOn Fedora 12, I guess this is a security setting. How do I get Apache to pick up more than one website in my document root directory. It only picks up one and denies me permission to view the others on my document root directory. This problem doesn't exist in XAMMP. How do I go about it please.
View 5 Replies View RelatedQuestion (and Google results aren't making this clear): Ubuntu has both iptables & ip6tables installed. 1. If I set a rule in iptables, does that rule also apply to ipv6, or just ipv4?
2. If "no" to above, then it would be prudent to *also* set ip6tables rules as well if I want to maintain an active firewall, correct?
3. Does ip6tables rules have the same syntax and behavior (more or less) to iptables rules - i.e. can I just copy my iptables rules & change "iptables" to "ip6tables"?
4. Any gotchas or issues that I should be aware of?
I've been playing around with rewrite rules and I cannot get it to work for what I'm trying to do.I want it so that when someone goes to http://www.mydomain.com/HWM/ it redirects it to /cgi-bin/HWM/somefile.cgiHere's the config for my virtual host:
Code:
NameVirtualHost *
<VirtualHost *>
[code]....
I want to customize the installation and I'm following the instructions here.I added my packages but now the iso is much larger(about 770 MB)Now I know I can simply delete from cd-image/dists/ but then the installer fails on missing deps.How can I do this safely ?
View 2 Replies View RelatedI'm setting up a web server but I have no experience with RAID. I would like to try this configuration if possible:
2 x HDD 500GB RAID1
1 x HDD 20GB (logs and tmp)
The old 20GB drive I would like to use it to store logs and temporally files (mounted in /var/log and /tmp respectively). With this I'm trying to reduce some disk usage in the RAID drives. In my idea, it would be better to write the access/error logs of the web server in a separated drive to the one serving the files which may increase speed... sounds crazy?
One problem is that during the installation, If I set the RAID automatically it will try to use my 20GB HDD as well in the RAID... Does it will work if I set the RAID first (removing the 20GB HDD) and then set the mount points in it after the installation?
I have a few problems getting a custom service/daemon to auto-start at boot. I'm running ubuntu 11.04 Server amd64 edition. One of the services is a Teamspeak3 server I'm trying to start. I would like it to start up automatically on boot. ts3 already have a script with start/stop commands so all i have done is make a little script for it to get it to run as the correct user.
Code:
#!/bin/sh
### BEGIN INIT INFO
# Provides: ts3
# Required-Start: $all
# Required-Stop: $local_fs $remote_fs $network $syslog $named
# Default-Start: 2 3 4 5
[Code]...
I setup postfix and got that accepting emails without any problem. I tried to setup amavis to use ClamAV and spammAssasin and now i am not receiving emails. Mail log has multiple lines like the one bellow.
May 11 06:23:34 secure postfix/qmgr[21522]: warning: connect to transport amavis: Connection refused
I've got a little problem with black and white listing in amavis.
My individual score is working, but when I list some mail in blacklist then this mail is still delivered.
This is some part of maillog
This is part of my amavisd.conf - this file is too big
I have CentOS 5.3 ISPConfig 3 installed. I have noticed that some mail I sent out were lost. Expecially, email with subject like "a" or "aa". I think Amavis block my email. Please tell me how to configure amavis to allow all outgoing email by postfix?
View 1 Replies View RelatedI can send emails to local accounts but not out to the world. Here are the refrences I used to set things up.
[URL]
I was able to send and receive after the "basic" setup. I added amavis-new and I am pretty sure that it stopped working then. (late nights, lots of changes/tries not 100% sure any more) Went back to basics trying to send a test email from telnet (on the server).
Code:
mail:~# telnet mail.my-server.com 25
Trying 216.240.35.89...
Connected to mail.my-server.com.
[code]....
I have a small faliure in my config after i have installed a postfix mx server on my local lan to provide me sysmails from my local network.I have masked my domain and my relay mailserver, so it can't be used to wrong thingsI run Debian 5 Lenny all packets upgraded with aptitude.
View 3 Replies View RelatedI am trying to get custom options to work.
This is my Dhcpd.conf file
This shows that I have 3 custom option in RED.
Now when I try to pull an Ip from the 96.63.0.0/24 subnet I do not see the options in the DHCPACK from the server. The client gets an IP 96.63.0.12 but no options are present in the DHCPACK or any other DHCP transaction. I have confirmed this trhough tcpdumps on the server and client.
The server version I am using is:
The version of the DHCP server is :
Internet Systems Consortium DHCP Server V3.0.6-Fedora
I use .htaccess to deny all ip addresses except certain to an internal wiki on a subdomain.
Code:
If access is denied to the homepage users are shown the Fedora test page instead of my own custom 403 error page. When I go to a page - not home - I see a standard 403 error page.
Code:
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. Apache/2.0.54 (Fedora) Server at wiki.domain.com Port 80. What am I missing here? Seems like my ErrorDocument is not being reached..
I have been wanting to increase the fps rate of my current game servers, and I need to have a custom config for this cause I'm only hitting 500. I have, attached, a custom kernel config and not to sure what to do with it at this point. The file name is config-2.6.24-zen4-lld.no-po.2000hz
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-zen4-lld.no-po.2000hz
# Tue Nov 25 22:54:23 2008
# Zen Options
# Kernel Tunables
# CONFIG_ZEN_SERVER is not set .....
# IO Schedulers
# CONFIG_FINGERPRINTING is not set
After the EOL of 0.94 clamav, I removed it stopped amavisd from having my mail scanned, and installed the new version of clamav 0.96.
But, when I try to start amavisd and send a test mail these bunch of errors appears:
[code]....
I've read some posts that had no reply, someone tried to telnet to 127.0.0.1:3110 "the default port of clamd". I tried that but I got connection refused.
I dont know were to begin to solve my problem and I have been googling for hours to get a hint without any success. I'm runnning a Counterstrike Server on my virtual openSuse server - I'm exploring so don't justify what I am hosting at the moment
I want to make it possible to gain access to the cstrike folde via a ftp login. But I really have no idea were to start. The server is also a webserver, where I can ass FTP accounts for my apache vhosts via plesk - but I dont think this is the solution of my problem, isn't it?
Just spent three whole days barking up the wrong tree, solving Fedora 11 and Fedora 12 boot failures because the correct hypothesis was illogical: installation did not update/modify the initrd.
The first couple of times I installed Fedora 11 on the HighPoint Technologies RocketRaid 2640x4, the installation inserted my "custom" driver module (rr26xx) into the initrd, permanently, so that the system booted off the controller card for which the custom driver was inserted. (I yelled about this success in this thread: [url]
My most recent installs of BOTH F11 and F12 on the RocketRaid failed to properly set up the boot. It turns out that the "rr2640" module I "slipstreamed" into the installation process was *NOT* permanently added to the initrd by anaconda. (F12 gave me "no root device found boot has failed, sleeping forever", on boot; F11 hung also, without such error, I presume, during the init script execution). Because of limited resources and time, I only know for sure the module was missing from the F11 initrd, and am ASSUMING the same was the case with F12.
The only difference between the successful installs and the ones with failed boot is that the successful installs were made on a single-drive (JBOD) mode on the controller; whereas, the failed ones were placed on RAID 5. But, AFAIK, the created logical device for the card is "/dev/sda", in both cases, and the kernel can not distinguish between the two cases (or can it?). Thus, the inconsistency cost me a lot of time, and is still inexplicable to me.
Question: What is the best way to deal with custom drivers, today? There are custom spins, and many tools, like isomaster. Stupid question: Is there a way to modify the initrd inside an installer ISO -- be it for CD/DVD/USBboot drive -- beefing the init RAM disk with whatever modules you'd like, for the boot process (using, say, isomaster)?
And what makes anaconda understand that a module must be added to the initrd ? How can one force anaconda to do so?
How does moving to dracut as the initrd tool affect any/all of the above?
My Ubuntu 10.04 does not pick up my mp3 player via the usb port. The usb ports are working fine, picking up my storage device etc but when I plug in the mp3 player nothing happens, except that the device indicates that it is picking up power from the usb port. The device works fine on my other computer (Windows) and I tested it on another machine running on Ubuntu 10.04 where it picks up fine.
View 7 Replies View RelatedI'm running an HP Pavillion ZV6000, AMD 64 Athlon.I think that I'm not getting wireless because it never really shuts down. I've tried shutting down from the term (what I was used to from Damn Small) and it drops the window manager and then freezes on the black screen . . . I then have to do a hard shutdown (holding the power button).I've tried making sure that I don't have a USB stick in . . . shutdown wireless moduals, still the same.I'm starting to forget my keyboard commands, being that I am having to use windows to get on-line . . . like now!
View 4 Replies View RelatedI installed ubuntu and all was going fine, but now when I restart I wanna go down and boot windows, but as soon as I press the down arrow key to select it ubuntu starts, and there's still time in the autostart countdown! How do I choose windows?
View 3 Replies View RelatedStarted with a clean install, with new GeForce 6200 video card installed. Very impressed that when I tried to activate compiz, it informed me that I must download and install the relevant drivers - and it provided me with a 'one click' install! Now I'm running the latest driver (195) - well done guys!Anyway, happy as I am with a no-fuss install, I'd like to know what is everyones pick of CD ripper to MP3?
I've downloaded Asunder, but this seems very slow in comparison to other Windows-based apps I've tried.I wanted to try Sound Juicer, but unfortunately it requires some code to change from VBR to CBR @ 320kbps.
I am dualbooting Ubuntu 10.10 x64 and Windows 7 x64. I am using Burg instead of Grub2 since I like the nice graphical display for choosing which OS to boot. Unfortunately, after I turn on the computer from "shutting down" after a Windows session, it automatically chooses Ubuntu and doesn't let me choose Windows. (If I just "restart" after a Windows session, I can choose which OS I want to boot just fine).
After Ubuntu loads, I can restart and *then* I get the option of which OS to choose, but this is extremely frustrating to have to load Ubuntu then reboot just to get Windows. I am not using the OS Prober module (I disabled it, and have a manual entry in my 40_custom file for Windows).
I have 10.10 installed on my machine. I'm trying to install 10.4 on another partition. Install completes, but when I reboot, there's no entry in the grub menu for the 10.4 install. I tried adding an entry to 40_custom in /etc/grub.d, but it still doesn't show up. I'm pasting my 40_custom below.
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry 'Ubuntu 10.4' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos10)'
search --no-floppy --fs-uuid --set be888928-a477-4b31-b478-13271009c032
linux/boot/vmlinuz-2.6.32-24-generic root=UUID=be888928-a477-4b31-b478-13271009c032 ro quiet splash
initrd/boot/initrd.img-2.6.32-24-generic
}
Every time I log into my Ubuntu machine I have to enter my username (manually type it in)as pete@domain-name.net then put in my password.I can see local users are displayed on the welcome page, how can I add my domain user to the pick list, so I can just select it then tap in my password?
View 4 Replies View Relatedit might be simple but i have never been able to find this function on VLC
it is default on SMplayer and available on MoviePlayer though not default but i have looked around VLC carefully and see it nowhere
Maybe it simply is not there which is a shame as it is SO useful
I am using Unity 2D in a dated fujitsu sieamens laptop. I appreciate the speed and the responsiveness, but seriously... three clicks to pick a window? When you have 2 windows from the same app in different workspaces: When you have more than a window from a single application open in Unity 3D, you click on the app's icon in the launcher, and it will "scale" all the windows from the same app for you to choose. 2 clicks...
In 2D, click on the launcher, launches expo, showing all the windows, you choose the workspace containing the window you wanna go to, it zooms a little but (useless) sin the content of the windows is does not get rendered, then you click again and you are finally in your window... really..when you need to move through windows quickly this get painful. My suggestion is to remove the zooming "preview" part since it does not render the content of the windows, making itself useless.