I'm currently running SUSE 11.1 and trying to start Amavis so I can use Kmail. I have just run the latest updates via Yast. I'm getting the following when I try to start Amavis: /etc/init.d/amavis start returned 7 (program is not running):
View 1 RepliesI setup postfix and got that accepting emails without any problem. I tried to setup amavis to use ClamAV and spammAssasin and now i am not receiving emails. Mail log has multiple lines like the one bellow.
May 11 06:23:34 secure postfix/qmgr[21522]: warning: connect to transport amavis: Connection refused
I've got a little problem with black and white listing in amavis.
My individual score is working, but when I list some mail in blacklist then this mail is still delivered.
This is some part of maillog
This is part of my amavisd.conf - this file is too big
i tried to create a custom rules in /etc/mail/spamassassin/local.cf
[code]...
but amavis does not pick it up and still let the email pass through. What shall i do, in order to pick up the email as spam?
I have CentOS 5.3 ISPConfig 3 installed. I have noticed that some mail I sent out were lost. Expecially, email with subject like "a" or "aa". I think Amavis block my email. Please tell me how to configure amavis to allow all outgoing email by postfix?
View 1 Replies View RelatedI can send emails to local accounts but not out to the world. Here are the refrences I used to set things up.
[URL]
I was able to send and receive after the "basic" setup. I added amavis-new and I am pretty sure that it stopped working then. (late nights, lots of changes/tries not 100% sure any more) Went back to basics trying to send a test email from telnet (on the server).
Code:
mail:~# telnet mail.my-server.com 25
Trying 216.240.35.89...
Connected to mail.my-server.com.
[code]....
I have a small faliure in my config after i have installed a postfix mx server on my local lan to provide me sysmails from my local network.I have masked my domain and my relay mailserver, so it can't be used to wrong thingsI run Debian 5 Lenny all packets upgraded with aptitude.
View 3 Replies View RelatedI am currently running Ubuntu Server 9.10 and followed this HOWTO on setting up my email server.
[url]
Everything seems to work correctly. If I look in the Maildir the emails I send to test are there.
The problem is when I try to sync my email via IMAP from my windows box (on a different network) it doesn't show any of my email nor does it deliver new email. My email app doesn't give any errors nor does the logs on the server.
How can I get it so my email syncs to windows computer? I am sure it is something really small that I am over looking but I can't seem to find it anywhere. I don't know if you need to see any of my config files but I can post them if needed.
After the EOL of 0.94 clamav, I removed it stopped amavisd from having my mail scanned, and installed the new version of clamav 0.96.
But, when I try to start amavisd and send a test mail these bunch of errors appears:
[code]....
I've read some posts that had no reply, someone tried to telnet to 127.0.0.1:3110 "the default port of clamd". I tried that but I got connection refused.
im using postfix with amavis and spamassassin as spam/virus filtering and its working great.However, i get a "lot"(1-5/day) of "bad header" messages beeing quarantined by the server. And most of theese bad headers are false positives that i manually have to deliver to the correct mailbox.How can i make amavis/spamassassin deliver bad header messages to the correct mailbox and not place them in quarantine?Theese are my amavis settings. (which file is used, 20-debian or 21-ubuntu??)
View 8 Replies View RelatedThe difference between: service httpd start & /etc/init.d/httpd start.
View 3 Replies View Relatedwhen i start qmail seervice it gives error#/etc/init.d/qmail startStarting qmail-toaster:
svscansupervise: fatal: unable to acquire pop3/supervise/lock: temporary failure
supervise: fatal: unable to acquire log/supervise/lock: temporary failure
supervise: fatal: unable to acquire log/supervise/lock: temporary failure
supervise: fatal: unable to acquire pop3-ssl/supervise/lock: temporary failure
I just installed TuxGuitar - very cool - and to get the sound to work I had to install Timidity++ as well. Before I start TuxGuitar I have to execute:timidity -iA -Osin a terminal window first, which is kind of a pain to do every time I run TuxGuitar.How do I get this line to execute on startup such that timidity is running when I start up? I tried adding that line to rc.local
View 13 Replies View RelatedI install lirc and want to prgram irxevent start automatic when the system start
Code:
System->Preferences->Startup Applications
Add an item,but that not works every time,means sometimes cannot work.
recently installed phpVirtualBox and VirtualBox on my 10.04 LTS ubuntu server it's getting annoying having to type
Code:
/usr/bin/vboxwebsrv -b --logfile /dev/null >/dev/null
every time i reboot the server
tried for hours to make an init.d script that will run it but failed..basically I just want it to automatically run the above command on every boot.
Long-time linux user, new to Ubuntu (mainly a gentoo user). I need to get tor and privoxy up and running for a less computer-capable user. I installed Tor and Privoxy, configured them (apparently correctly) and they both appear to work just fine when I start them manually from their init scripts:
sudo /etc/init.d/tor start
sudo /etc/init.d/privoxy start
However, I cannot seem to get privoxy to start up properly when the machine boots. Tor starts up and waits patiently, but privoxy is dying or getting killed for some reason I can't understand, and on Ubuntu, have no idea how to diagnose. There's no privoxy process after booting, and the init.d script reports status: not running. I have the startup scripts for both Tor and Privoxy linked to in all the relevant runlevels. I played with the order thinking it might be a dependency thing. Hell, I even put a line in rc.local to try and force it to go. But no matter what I do, I can't seem to get the privoxy service to start for me any way but by manually typing 'sudo /etc/init.d/privoxy start' in a terminal, after logging in.
1. Help me get privoxy to auto-start during init
2. OR Help me figure out how to figure out how to get privoxy to auto-start during init. On Gentoo, all of the init scripts are listed on the screen during init as they run, and you can even run through them interactively by pressing I during startup. I have no idea how to do this on Ubuntu. I modified the kernel line to remove the splash screen, but the information Ubuntu puts on the screen during init is quite haphazard. How do I figure out what's going wrong with the privoxy init script?
/etc/init.d/xorg start : No such file or directoryWhen the server boots i get a blinking cursor.
View 2 Replies View RelatedI have two ubuntu servers. I have upgraded them to 10.04. Now I have serious problems at startup: iscsitarget and heartbeat scripts do not start all the times I reboot.I have installed monit to try to start iscsitarget and heartbeat and guess what? It does not start too at boot.In one of the two server sometimes it also starts with ethernet cards swapped.
View 2 Replies View RelatedHere is my xorg.conf when I attempt to use fglrx:
Section "Device"
Identifier "ATI RADEON HD4850"
# Driver "ati"
Driver "fglrx"
EndSection
Also, doing /etc/init.d/start/ gdm3 says Starting GNOME display manager: gdm3 but it doesn't do anything. I tried pressing ctrl+f1 all the way to ctrl+f12 and nothing. What does work however is sudo gdm3 (with the "ati"/"radeon" driver --- nothing works at all with fglrx).
I am trying to get fglrx working because I want to fix this compiz issue I've been having here which could be related to the shortcomings of the "ati"/"radeon" driver: viewtopic.php?f=10&t=40991&p=312577#p312577
I installed the latest Debian on a computer to make a backup appliance. No GUI.When the computer starts, everything is okay. The DHCP client is running, the network interface have an address, fine.If I do a /etc/init.d/network restart (or stop + start), no more DHCP client. t is stopped when the interface is down. When the interface is up, I have to start it manually.1 - is it normal ?2 - isn't ifup's job to launch the dhcp client ?3 - can /etc/network/if-up.d be the right place to resolve this ?
View 4 Replies View RelatedI installed squid on my machine, and for a while it was starting up automatically when the computer would turn on, and I would only have to reconfigure on ip-up for the new dns, etc.Now for some reason, I notice that squid isn't even started.To fix this, I wrote a start up script in /etc/rcS.d/ that runs:/etc/init.d/squid3 startAnd I notice it still isn't starting.So I write "/etc/init.d/squid3 start" and put it in my ip-up.d/ script.Everything in the script is being executed, but the squid server.I've tried reinstalling squid... what am I missing? where does the computer start these services?
View 4 Replies View RelatedI had been having problems with every LiveCD after 8.04.1 I tried both xubuntu and ubuntu (same internals, same results)
I ended up installing xubuntu 10.4 using the text mode installer.
The system basically works, I can not get gdm running.
dbus fails as noted above. I found launchpad bug #446971 and tried some of the work arounds with no success.
The system is an old eMachines T1120
Code:
CPU: Intel Celeron Processor 1.20GHz (w/256KB)
Operating System: Genuine Microsoft Windows XP Home Edition
Chipset: Intel 810e chipset
[Code]....
I have installed the Apache Directory Server (ApacheDS) Now I need a iniscript that startining the App as Root, so that it can use the Port 389. After them a unprivileged User (apachds) should run the Service. The same solution I am searching for Glassfish. What can I use for them? RHEL and compatibles doesn't have a start-stop-daemon like Debian.
View 3 Replies View RelatedI am using Ubuntu 10.04 LTS. Two days ago I updated using update manager. After that I can not boot Ubuntu. When I trying to boot system showing message " Ubuntu is running in low-graphics mode Your screen, graphics card and input device settings could not be detected correctly. You will need to configure these yourself" But I can not configure it.I can not boot to 'recovery mode' also
/var/log/boot.log
Code:
fsck from util-linux-ng 2.17.2
/dev/sda6: clean, 304282/1680960 files, 2964945/6723194 blocks
init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
[code]....
Now I am using Live CD.
Is there a way to start a program via ssh?I have a SSH app on my android phone and would like to start VLC from my phone. Neither the command "VLC", "nohup VLC" or "VLC &" seem to do the trick.
View 4 Replies View RelatedI want to make alarm(buzzer) and Lamp(led) to work from infrared sensor output via usb.When ir sensor detect motion it will make the alarm&lamp on. Then also sending mail. Im using pic 18f2550-1/sp(usb Fsio from km2.net).But i dont know how to start the program.
View 2 Replies View RelatedI know there's a bunch of ways to start a program on boot, but I'm wondering if there's pluses/minuses to the ways and what they are.My req's:1. I want it to be started as the user I log in as (NOT root)
View 4 Replies View Relatedthere's a little app called F.Lux that sets your screen temperature based on the time of day. The Linux version is a little spartan with just a console interface but it works perfectly well. The question I have is where can I invoke it so that it starts up after X has started?
View 4 Replies View RelatedI have downloaded the linux version of Rise of the Triad and I'm able to start this program if I double click it (Files.png) but I want an entry in the menu so that I can start it from the menu, but what's the command to start it from the menu ?I already tried ./ and sh in front of the command but it doesn't work (menu.jpg).
View 9 Replies View Relatedi installed elegant gnome theme in ubuntu and i delete all others themes with their icons too but when i start to use my others program usually, after i installed elegant gnome theme ..i find that Kopete program his tray icon doesn't display beside all his other icons like online offline away icons indicators ,and here is a picture about how the program look in start bar with no icon ,so how can i fix that and get icons of this program back although i didn't delete his icons and when i deleted theme and icons i delete them from "appearance preference".
View 1 Replies View Related