I've been playing around with rewrite rules and I cannot get it to work for what I'm trying to do.I want it so that when someone goes to http://www.mydomain.com/HWM/ it redirects it to /cgi-bin/HWM/somefile.cgiHere's the config for my virtual host:
Code:
NameVirtualHost *
<VirtualHost *>
[code]....
I am trying to create apache rule which will redirect each request not ending with .php prefix to php prefix. I am trying to make such a rule for hours, but none of my works.
Example: I don't know syntax of rewrite rules, but I'd like to make something like this:
RewriteRule ^(.*)(NOT .php) $1.php
(so everything not ending with .php will end in everything with .php extension.
EDIT: Maybe better question would be "how to negate string group" or "is not equal to string"...
I want to rewrite one url using apache mod_rewrite,
myurl is [URL]
and want to rewrite like this. [URL]
I'm trying to enable the rewrite module in apache, to enabled the module I followed the last entry in the fist page this thread:[URL]...When I restart the apache all works fine, so I supose it's enabled
Now I create .htaccess in my apache folder (/home/user/apache), and I write this:
Code:
RewriteEngine On
RewriteRule ^link([^/]*).html$ test.php?link=$1 [L]
And I try to execute this: ./.htaccess, I have this mistakes:
Code:
./.htaccess: 1: RewriteEngine: not found
./.htaccess: 2: Syntax error: "(" unexpected
What are I doing wrong?
I have done a2enmod rewriteand rewrite.load appears in the mods-enabled subdirectory.
My httpd.conf file contains DocumentRoot "/usr/appl/prod/htdocs/" <Directory />Options FollowSymLinks
AllowOverride All
Order deny, allow
[code].....
I want to redirect [url] to [url] how to do this? The only solution that came up is just redirect everything to a php file, and than ask the php file do the redirect..... I want to do it using .htaccess file instead of using PHP or CGI.
View 4 Replies View Relatedi am trying to get this rewrite using a text file to work but it seems not to pick up the text or read it the way i want. here is what is happening i want to merge 2 domains .com and .net into one vhost file and one website. but the .net has alot of redirects which i want to put in a txt file bacuse there are over 200 line of redirects static.also exclude the robots.txt file. and i want the rule to look for any string be it after the first slash of with the url like so
[URL]
should use the map text file and rewrite.
txt file example
wsd/html/aboutus.html /aboutus
wsd/html/aboutus.htm /aboutus
wsd/html/aboutus.php /aboutus
[Code]....
I have a base install of a LAMP server on my system, and I'm trying to get mod_rewrite working on that local server (the directory of the local site is [URL]. I added this to my /etc/apache2/httpd.conf file, which was blank before I did so:
Code:
<Directory />
Options FollowSymLinks
AllowOverride All
Order deny,allow
[code]....
It's supposed to redirect everything except the listed directories to index.php, which is used as a front controller. However, if I type in [URL] <any other page> I get a 404 error.
redirect a domain name with /abc to external ip of web server. Now I can made sure that I should use the rewrite module to achieve this issues. But I don't know how can I enable this function in my apache web server. I will post my httpd.conf for your reference.
View 14 Replies View RelatedI have a website example.com, serving pages on port 80. I want the url example.com/redmine to be rewritten to port 3000, where my redmine server is running, without actually changing the URL. So the user typing in example.com/redmine/test would serve up example.com:3000/test, without the user actually connecting through the port. I know this can work through CPanel, but I don't know exactly how it was implemented. I'm looked at how mod_proxy, mod_proxy_html, and mod_rewrite,
View 4 Replies View RelatedI'm trying to make a redirect rule on my .htaccess but it's not working as planned.
Quote:
The first rule works fine, but on the second rule i do have a problem.
When I type http://domain.com/?tempskin=_rss2 the redirect does not work, but if I change the ? to any other character or even group of characters, the redirect works fine. example:
[url] will be redirected to [url]
But i do need to redirect the ?tempskin=_rss2. I already tried some variations on the redirect rule without any success.
I am trying to setup a virtual machine server as a web development environment. Install and setup is going correct. To avoid any accidents I have the apache alias set to www.example.dev instead of www.example.com. The URL will redirect no problem but I need to find a way to have every instance of a link (example.com) show up as (example.dev) so that whole site will function on the server without linking to the live external site. I'm using git as a version control system that will push certain commits to my live site and thus want to avoid changing any configuration files to get this desired effect on my virtual machine. How to do this server side, maybe via PHP, apache2.
View 4 Replies View RelatedQuestion (and Google results aren't making this clear): Ubuntu has both iptables & ip6tables installed. 1. If I set a rule in iptables, does that rule also apply to ipv6, or just ipv4?
2. If "no" to above, then it would be prudent to *also* set ip6tables rules as well if I want to maintain an active firewall, correct?
3. Does ip6tables rules have the same syntax and behavior (more or less) to iptables rules - i.e. can I just copy my iptables rules & change "iptables" to "ip6tables"?
4. Any gotchas or issues that I should be aware of?
We have a apache server which have a ssl certificate like www.abc.com. We hosting a website is a online giving shop which need ssl cetificate in https. website of this is www.123.com, it will redirect tow this website owner don't want to show What can I do to achieve this ? Can I use rewrite function in apache to achieve this? How? or we need to buy any other ssl certificate for www.123.com? How can I install multiple sslcertificate in one apache server?
View 4 Replies View Relatedi tried to create a custom rules in /etc/mail/spamassassin/local.cf
[code]...
but amavis does not pick it up and still let the email pass through. What shall i do, in order to pick up the email as spam?
I had a problem with apache2 and getting .htaccess working. I have done some things and i believe its working the ErrorDocument command is anyway. I believe there may be some problems with the rewrites though.Im trying to take a urlhttp://localhost/showthread/123and make it display whats on http://localhost/index.php?showthread=123The rewrite rule is Quote:
Options +FollowSymLinks
RewriteEngine on
RewriteRule ^showthread/([^/.]+)/?$ index.php?showthread=$1 [L]
[code]....
I have Webmin installed on an Ubuntu server. I currently have a successful apache server running on port 80, however I want to create a virtual host on port 81. When I try I go to servers->Apache Webserver-> Create Virtual Host I change the port to 81 and the document root to /var/port81www then I click create. How ever when I goto 192.168.1.5:81 (local ip, I know I have to port forward but its not even working local) it does not work.
View 5 Replies View RelatedI've run into a problem and I don't know if it's apache or php or the combination of both. I can compile apache 2.2.15 just fine, but whenever I try to compile php 5.3.2 into my server, the first two steps work just fine but when I get to the make install part it shows the libphp5.so and it just stays there and I have to cancel the install because it won't finish.
View 5 Replies View Relatedjust switched our company from windows server to linux and everything is going good except we have 4 vpn connections though out the country coming to our server. All giving the client machines ip addresses of 192.168.x.x based on where they are located 192.168.1.x for the main location 192.168.2.x for a second location etc, and IIS could see the clients ip instead of the wan ip and was setup to block all ips except 192.168.x.x ip's and this worked great.
So i set up apache the same way, to allow only 192.168 ip's but i guess it doesn't work that way in apache for connections coming though vpn? 2 out of our 4 VPN connections are not static IP's, so the 2 that are I just add that ip to the allow list and that worked.But i don't think we should HAVE to get static ips for the other 2, that's one of the benefits of using VPN, especially if our old windows server didnt need it.Is there any way for apache to see the clients ip address for access or is there something somewhere else that needs changed for this?
I've got some strange looking requests in my access_log which I don't much like the look of. Can someone take a look and let me know if 1) it's possible for other people to use my server as a proxy, and 2) how I can stop them.
Code:
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "CONNECT 213.92.8.7:31204 HTTP/1.0" 200 1606
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "CONNECT 213.92.8.7:31204 HTTP/1.0" 200 1606
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "GET http://vlad-tepes.bofh.it/proxy.txt HTTP/1.0" 404 1955
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "GET http://vlad-tepes.bofh.it/proxy.txt HTTP/1.0" 404 1955
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "CONNECT 213.92.8.7:31204 HTTP/1.0" 200 1606
[Code]...
My Server is 8.04 (hardy) and Apache is 2.2.8. I have been receiving emails from Apache each time a new stable release is available, most of which say you should install them due to security issues. The current stable release of apache being offered is 2.2.17
Q1) Do you recommend I upgrade from Apache 2.2.8 to 2.2.17?
Q2) Does this come automatically with my regular updates via Update Manager once the Ubuntu community thinks its stable enough (it appears that it doesn't)?
Q3) What is the best way to install the update?
Q4) Any concerns about installing it into a live environment? I don't have a development platform to try it in first.
When starting Apache I get this error in 10.10 (not in 9.10): [Fri Dec 03 21:14:22 2010] [error] (2)No such file or directory: could not open transfer log file /etc/apache2/${APACHE_LOG_DIR}/other_vhosts_access.log. Unable to open logs So where do I define APACHE_LOG_DIR ?
View 4 Replies View RelatedI'm looking to run some R scripts on a mysql database (engine =csv) from the apache webserver.
The goal is to record some statistics/numbers while someone is logged in, pass those numbers to r, run some statistics algorithms on the passed set of data and output an image file back to the logged-in user's html web page.
Doing this along with knowledge on how to call general r functions from within a php framework would be great.
I would like to add ROR to my web server, but I would still like to keep php. I tried doing this a few days ago, but it made my PHP unusable so that it would ask me to download a file rather than displaying the php page. how to install ruby on rails without trashing my system again.
View 3 Replies View RelatedI was wondering if anyone knows how to make a zone file for bind dns server that points "example.com" and all (by all i mean any) sub-domains to this 127.0.0.1 address. and i wanted to set up a virtual host in apache to use /var/www/eample/index.php for 'example.com' and all of its sub-domains.
View 1 Replies View RelatedCan anyone point me to a good apache GUI?
Ive read online about webmin, ebox etc but are there any others? I'm using gnome on my server and i did a search through the Ubuntu software Centre but nothing came up.
So here is my problem. I have websiteA.com and websiteB.com. I only have one public IP address. And websiteB needs to be constantly restarted, so both need to be on separate apache servers or instances.Virtual directories wont work cause I can only point websiteA to a directory /var/www/websiteA.Reverse proxy wont work cause I can only catch a sub directory.Proxy /websiteA/ URL...Does anyone know how I could get this to work in anyway.
View 4 Replies View RelatedIm trying to just set up my web page so it can be seen on my local home Lan (then Ill try to get it on the internet). I can see the site it on my pc but other network users cant.
They can ping my computer but cant telnet to it on port 6060 (thats the one is set the server up on)
What's wrong with my configuration its mostly the default with a few changes that I hoped would make the site work.
My ip 192.168.1.10
Here is the sites-available default file
Quote:
I have a virtual server setup on port 80 that works fine, however, if I change the port to, say, 8080 the browser then fails to connect.I'm using webmin to configure everything, all the other settings seem to work as I would expect.I get the error "Safari canī open the page http://192.168.0.12:8080 because Safari cant connect to the server 192.168.0.1." in safari, and i get something similar on the xubuntu machine in firefox connecting via localhost.It's almost as though theres a firewall in the way, but I think it's more likely to be some config problem.
View 2 Replies View RelatedI've setup a Ubuntu 9.10 LAMP server to host a word press blog on an intranet. I've got everything working except the url for the site.The IP address of the server will take me to the site URL.../But I'd rather use the server's name instead of the IP address URL...When i try to go to URL... in Firefox or IE it give me a server not found page and changes the URL to URL...I also have Webmin installed on the server and I've been playing around with the Apache module and can't figure out how to set it so i can use the server name instead of the IP address to get to the site.
View 6 Replies View Related