I am new to ubuntu and just installed the vsftpd service by this tutorial: [URL]. Now my question is how can I give users rights to one specific folder?
useradd username -d /home/folder/new
Thats the command id used but when I login to the ftp the user is able to see all other folders as well ..
I would like to configure an access to folder
/fileserver
for two services : Samba and VSFTPD
How to do it ? How to create folder rights that samba and ftp user will have an access (read/write/delete) to all directories in /fileserver.
My system is CentOS. I`m starting samba and vsftpd like a root (/etc/init.d/vsftpd start etc.)
I just set up my own server and basically my folder is on say /media/disk1/ and my girlfriends is on /media/patato/ is there a way i can set it so that if i log in it goes to my folder and if she does it goes to hers.... I've currently got it set up as /media/ that it goes to but i cant get it to change it for each user (we can also browse each others drive and we dont want that, we want to be tied into /media/ourdirectory and all of its subdirectories) problem is that it is running on a computer that use to be functional (same install because I cant find my disk drive) so it cant use home folders....
View 1 Replies View RelatedLately I'm getting this question a lot.For every project I want to create a tree like this:
Code:
- project
- drawing
[code]...
How can I mount a device with specific user rights on start up? I still have some problems figuring it out. I would like to mount the divide with uid=1000 and gid=1000. My current entry to the /etc/fstab/ file looks like this:
dev /var/www vboxsf rw, suid, dev, exec, auto, nouser, async, uid=1000
I am using CentOS 5.5 and I created few users (useradd john etc.) and now I want to assign privileges to this user on some directories and files in those directories. For example I want to give read privileges to directory "/documents" and all of files under that directory.
View 13 Replies View RelatedI am trying to set up a simple home file-server for media and backups, using an old Atom board I had lying around and 1GB memory, so I don't want a full desktop. All goes well with installing server 10.10, using LVM for my data disk. However, I wanted some GUI tools since I am not familiar with the CLI, so I installed gdm, xorg, and gnome-core as suggested in some threads and forums.So far so good, it boots into the Gnome desktop, but I can't get sudo access with anything (synaptic, gkedit, etc.) - always "incorrect password". I am fine from the console; I reset my user password, no luck; I set up another admin user, and that also works in console but not the desktop.I have no idea where to go next and can't find anything that works in the forum
View 4 Replies View RelatedI am new with Linux but really be interested in it. I would like to ask that if it is possible to make each VirtualHost only controllable by a specific and different user? If so, how to?
View 3 Replies View RelatedI'm trying to get vsftpd running with both anonymous and local user access to the same folder. The directory I'm using is /tftp with the following permissions:
dr-srwxrwx 7 root root 12288 2009-08-14 15:54 tftp
My vsftpd.conf is this:
anonymous_enable=YES
local_enable=YES
write_enable=YES
[code]....
I set the default "ftp" user's home directory to /tftp (was /var/ftp).
Now I have set up a terminal server at work, with Ubuntu 10.04LTS and Free NX terminal server. All works great, over all expectations. But I have some file permission problems. In the home folder I have mad a folder where files that all users should have full access to is put. The problem is that when a user puts a file there, only that user have full access to that file, other users only have read rights. How can I make it so that all files put in this folder have full rights for members in the group "staff"?
View 3 Replies View Relatedallow specific user permission to read/write my folder
I have a folder called /TAR/Sketch
I added a new user, named Snoopy, I want to grant this user the ability to add files & directories to this folder which is under the group Sketches and the owner is me.
How can I accomplish this ?
I'd like to configure vsftpd server in a way to allow remote user (local) too see and edit configuration files in their ftp directory starting from dot (like .htaccess, for example). With default configuration + "local_allowed = yes" it does not appear to be possible:user can successfully upload .file but could neither see if it is in directory nor download it.
View 5 Replies View RelatedWhen I try to upload files via FTP to a specific folder (/var/www/myfolder/) I get the message 550 permission is denied. I set CHMOD 777 for this folder (I had to do this via SSH cause I was not allowed to do this in FileZilla)
View 5 Replies View RelatedI have a user account which is required to run as part of the operating system and as a service. I am currently attempting to install my companies software on an Ubuntu desktop via wine just for the purpose of finding out if it's do-able.
Is there a way, in Ubuntu, for a user account to be given the local rights assignment to act as part of the operating system and to function as a service in the background?
How can I assign a directory to a specific partition (another hard drive)?How would someone move / home/ username/music to another drive or partition? But do so in a way that it no longer writes MP3's (or FLAC) files in the original directory of the root drive?
View 9 Replies View RelatedI am using ubuntu 10.04 and opensuse 11.3. I would like to know how to assign each application to a specific worksapce. For example，when I open a pdf file, it will be moved to workspace2. When I open a movie, it will be moved to workspace3. In Leopard, "Space" have such features. I would like to know the way to achieve this in ubuntu and opensuse, in an easy way, meaning that just need to install a small package, not a big one , like compiz
View 1 Replies View RelatedUsing Ubuntu Server maverick here - after altering /etc/network/interfaces to use a static ip and checking /etc/resolv.conf (no alteration needed) no network services were working at all. Here are the contents of interfaces:
Code:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.1.100
netmask 255.255.255.0
broadcast 192.168.1.0
gateway 192.168.1.254
I was fairly certain that this was verbatim from my previous server which is no longer attached to the network. After hours of fooling around with no success I changed the address to 192.168.1.99 and it worked perfectly. So my question is: why? My old server used 100. Could the router refuse to give a new server the same address or something like that since that address had been taken in the past?
Currently I have 5 HID's I would like to use on the system at any given time. However, I have the problem of them using different device paths depending on what order I plug them in... Which wreaks havoc on qjoypad and also my music software which looks for a specific device number, which may or may not be the same as it was last time.
For example, I have 2 rock band drum controllers which I use to send MIDI signals. I need them always assigned to the same device path, so that I don't have to change the settings in my music software every time I run it, to make sure it's looking at the right controller
Or if I am going to play games with a gamepad, but I also have the drums hooked up, the gamepad may be assigned to /dev/input/js2, so I create my qjoypad profile.... Let's say the next day I reboot with the drums not plugged in, the gamepad is now /dev/input/js0, and the qjoypad profile won't work because it is looking for that gamepad at /dev/input/js2... So I would either have to create a new profile, or hook the drums back up in the same order ... Or something
It's just a mess...
Is there any way to tell Ubuntu to say "/dev/input/js0 is always Playstation gamepad", "/dev/input/js1 is always drum pad 1", etc.?
Or some way to do away with /dev/input scheme altogether and somehow link directly to the name of the device?
I need to search a bunch of files in a specific folder for a specific number and add all the numbers together to a total sum. I use Rsync everyday, everytime I run rsync i get a logfile (rsync output) witch contains the textstring "Total bytes sent: xxxxxx".
The "xxxxx" can vary in lenght. I need to extract the "xxxxxx" from each file and add the numbers together to a total size over a week or a month. Is this possible? And I wish to only use bash. One way of doing stuff at a time my friends .
Okay, I have been all over the web... all over JustLinux and pretty much spent several months trying to find one simple answer. How do I easily map two applications to my trackball?I have a Kensington Expert Mouse Model K64325. It has a scroll wheel, and 4 mouse buttons. I have used xev to figure out which button is which. The upper left = 2 and the upper right = 8. I want the upper left to open Firefox when I click it. I want the upper right to open REALBasic when I click it.I know this can be done (really easily too!) in Windows. I want to do it in Linux. Especially since I have several systems like this. Also I can then take what I learn from my own experience and start mapping OTHER people that are total Linux newbs, mice for them.
The mouse works great all I want are the two feature/options I just listed and I cannot find a single answer anywhere on the web that seem to address my question. SO I am hoping someone here will have a laymans answer.
I want to setup 1Gbps our lab network and we purchased 'Buffulo Giga layer switch ' with 24ports. Is there a way to tell DHCP to assign specific IP to a particular MAC address of a machine ? We want to use DHCP and whatever the port we use ,it should have same IP ..
View 1 Replies View RelatedThis is one of those questions where I highly suspect that the answer will be something like ". . .just stinks bein' you, kid."My setup:I have Ubuntu 10.04 x64 (desktop) installed on a computer with a bunch of SATA ports, including one e-SATA on the backBecause of the way the hardware works with these ports, the *external* port is the first SATA port, a second SATA port inside becomes #2, and a cluster of four ports (that can be made into a (ahem!) RAID array become ports 3 through 6.
All ports are configured as SATA (PATA emulation)My boot drive is located on SATA-2 (the inside connector), a four disk "MD" raid array is located on SATA 3-6, and I have an external HD enclosure that I plug into the e-SATA connection.
With all six drives plugged in, they get ordered like this:
/dev/sda - External drive
/dev/sdb - Internal operating system drive (bootable)
[code]....
How do I give permission to a logged in user to stop/start a specific service without entering a root/sudo password? So they can do a simple "service SomeService stop|start" It is for a headless Ubuntu server.
View 5 Replies View RelatedI have some beginner questions about DHCP, Avahi, and configuring a small home LAN.Suppose I have a dynamic IP address assigned by my ISP, which requires DHCP be enabled in my dsl modem/router/"firewall" [sic]. Suppose for simplicity I have just one PC behind the dsl modem.I think "enabling DHCP" in the modem/router means that a DHCP client runs on the router, which communicates with a DHCP server run by my ISP when I boot up a PC on my LAN. Is that guess correct? Can I get DHCP to assign a particular local IP, say 192.168.1.10 (which is not the one taken by the router--- for this discussion, let's say that is 192.168.1.0) to my PC each time I boot it up?
Now suppose I want to build a stand-alone firewall, so that my LAN will have the firewall and the first PC behind the modem, with the first PC virtually behind the firewall. By default, I think these will both have DHCP clients running which I need to configure properly. The firewall should also have a DHCP server which should control how local IP addresses are assigned, correct? I should try to arrange that the LAN has only DHCP server, only one NTP timeserver, only one DNS nameserver, correct?My first PC seems to have installed an autorun client called Avahi, which performs DNS multicast services and incorporates something called zeroconf which seems to have something to do with remote desktops, which I don't need and which is a potential security hazard. But it seems that Avahi is an intrinsic part of the KDE desktop and cannot be removed. Just want to be sure that Avahi can coexist comfortably with dhcp3-client, which is also installed on that PC. They perform different tasks, correct?If I can get the stand-alone firewall to work, I know I need to turn off the commercial firewall in the dslmodem/router/firewall device. Should I purchase a bridge and try to turn off the routing function also?
I have 2 monitors. I'm using the Nvidia driver in Twinview Mode on the right side. I can move the cursor from one monitor to the next and I can drag applications between the two. I have multiple activities. And the second monitor selected one of those other activities as the background. I'm not sure how this was chosen, or if I have a choice. Anyone know? Do activities affect what is displayed in a dual monitor setting? As I toggle through the activities, the two monitors change, but never to the same one.
When I open an application, it's a guessing game which monitor it appears on. Can I control that?
I know if one clicks the top left corner of an application they can send it "To Desktop" ("all", "Desktop 1", "Desktop 2", etc). If I could assign "Desktop 1" to monitor 1, and "Desktop 2" to monitor 2, I could then use the "To Desktop".
At a minimum, how does one control where applications open in a dual monitor setting?
my system I want user1 and only user1 to be able to mount and unmount a specific partition, this partition contains backups and is usually mounted read only, needs to be temporarily mounted read/write by user1 while doing the backup.user1 is an unprivileged user. I've read that the user option will let any user mount the file-system (and only that user can then subsequently unmount it) and that the users option allows any user to mount or unmount the file-system.I also found this in mount's man pageQuote:The owner option is similar to the user option, with the restriction that the user must be the owner of the special file. This may be useful e.g. for /dev/fd if a login script makes the console user owner of this device. The group option is similar, with the restriction that the user must be member of the group of the special file.So it looks like I'd need a login script for that user to make the user owner of the device file (/dev/voiceserv/backup in this case)
View 7 Replies View RelatedI'm new to Ubuntu and wish to use the system in combination with Apache/mySQL/phpMyAdmin. I managed to get phpMyAdmin working for now. Also mySQL database seems to work. Only problem is Apache2. I can start the server and it is working. However in the folder /var/www/ where all site files are stored, I can not edit anything. I have been reading about sudo nautilus which did allow me to change administrator rights for the folder, but still I do not get it working to display other than the default index.html page. Is there a manual or quick solution for me so I can use apache with Ubuntu?
View 2 Replies View RelatedI want to share files over the web with only a few people and limiting them to certain folders. I have been doing a remote access (ssh) to my server to access it from a pc on the local network. I later found out the same program doing ssh (open_ssh) was also doing sftp, great I could do both with one system account. Problem I couldn't find away to configure another user to go over the web with limited folder access without messing up my user to access the pc. I tried ftps by using vsftpd, I couldn't get chroot set up correctly or even log in. So my question is what program and/or protocol should I use to do secure ftp over the web?
OS: Ubuntu 64bit 10.04
I am novice user of linux. I need to know how to configure firewall so my system cant be compromised...In windows my system was greatly compromised. keyloggers were installed without my approval and my desktop was taken on remote. What should I do so without my knowledge no software can be installed and i can close all ports and only open which ever port is required to open. What should i do so my desktop cant be taken on remote?How do I configure user rights ? So except me no one can install any software. I will have another general user id for internet surfing
View 3 Replies View RelatedI have my own 16GB sandisk cruzer flash drive, I've already mounted him and can read on my own user, but I can write on it only using root. how can I give my user Chmod +x on the folder /media/XXX ?
View 7 Replies View Related