Ubuntu Servers :: User Rights With Minimal GUI On Server?
Jan 17, 2011
I am trying to set up a simple home file-server for media and backups, using an old Atom board I had lying around and 1GB memory, so I don't want a full desktop. All goes well with installing server 10.10, using LVM for my data disk. However, I wanted some GUI tools since I am not familiar with the CLI, so I installed gdm, xorg, and gnome-core as suggested in some threads and forums.So far so good, it boots into the Gnome desktop, but I can't get sudo access with anything (synaptic, gkedit, etc.) - always "incorrect password". I am fine from the console; I reset my user password, no luck; I set up another admin user, and that also works in console but not the desktop.I have no idea where to go next and can't find anything that works in the forum
After a long time I tried ubuntu(9.10) again on my fileserver, I have some remarks; why does a minimal server installation include X/openoffice? I don't need document conversion on a fileserver and I bet a lot of people don't. Wouldn't it be better to create a new server package and leave minimal minimal? low memory installs (64mb) don't work unless you configure swap by hand in between things, 64mb ram is a lot in my eyes. I mean, not to be rude but if I wanted all this I could've better installed Solaris.
That said it's stable and running fine. Since it's my home fileserver I tried to convert my previously created raid10 mirror on an adaptec 1200 card to a softraid 5 solution. This is wat I did:
I am new to ubuntu and just installed the vsftpd service by this tutorial: [URL]. Now my question is how can I give users rights to one specific folder? useradd username -d /home/folder/new Thats the command id used but when I login to the ftp the user is able to see all other folders as well ..
I'm having a bit of a problem after joining Ubuntu 9.04 to my company's Windows Domain. I can log in and use sudo just fine but I don't have access to certain things in my menu (i.e. "Add/Remove Software") and I can't open the User Manager. I manually edited the /etc/group file as root and added my username (username@domain) to the appropriate groups but still no luck.
I have configured Ldap Server in CentOS 5.4 & it's working fine, the problem is when I create a ldapuser from server the user can login in client machine but the user has no rights to change the password. How to rectify this by using commands.
I want to set samba to act as domain controller PDC.Is it possible to create user profil in samba with rights to change network settings but not install software, create users.Something like network admin that is like normal user but he is able change network settings.
I have a user account which is required to run as part of the operating system and as a service. I am currently attempting to install my companies software on an Ubuntu desktop via wine just for the purpose of finding out if it's do-able.
Is there a way, in Ubuntu, for a user account to be given the local rights assignment to act as part of the operating system and to function as a service in the background?
As I do not want to entrust my firefox data Mozilla's Server and have a server runnig anyway, I wanted to setup a server which provides weave service. I found this and know from different sources of the web that this indeed works: [URL] It is a stripped down Weave server intended for personal use. All in all, it does not sound to complicated. The developer says
Quote:
You ll need a relatively recent php with sqlite, mbstring and json support, and apache, preferably running ssl. Give it a shot and let me know how it worked for you in the comments. I have Fedora 14. Only problem is that Fedora does not provide a php-sqlite package. For this I found a repo [URL] So I installed php-sqlite (as well as php-pdo, php-cli and php common) with
Code:
yum --enablerepo=remi intstall php-sqlite
In consequense all php releted stuff was replayed by remi provided packages. In addition I installed json to get JSON support. The author describes the setup quite easy as follow:
Quote:
SERVER SETUP
Add the following line to your apache config:
Alias /weave /<path to this folder>/index.php
Restart your apache server. Point your browser at h[URL]. Enter "blah" for the username and garbage for the pwd. Auth will fail, but it will create the db (you can cancel the subsequent request for auth). You should now see a file called weave_db in the directory.
You can create and delete users by running the create_user script.
CLIENT SETUP
in about.config, set extensions.weave.serverURL to [URL] You can run it under http, but this is insecure and not recommended.If I disable or set SELinux to permissive mode I can point my browser to [URL] Here starts the trouble. After attemping to login no weave_db is created. I tried even 777 permission in that directory. I can run the create_user script with php and add a user, but the database does not seem to be recognized, I am unable to login into weave service.
trying to set up a very minimal X on my 10.04 64 bit version of Ubuntu running nothing but Open SSH and acting as a firewall/router, making a PPP connection. The reason, is that I want to set up KVM/Qemu and run a virtual machine. The virtual machine will have a graphical environment and will be connected to my TV so that I can watch movies, stream TV etc. using it. So far, I have done the following:
I'm new to Ubuntu and wish to use the system in combination with Apache/mySQL/phpMyAdmin. I managed to get phpMyAdmin working for now. Also mySQL database seems to work. Only problem is Apache2. I can start the server and it is working. However in the folder /var/www/ where all site files are stored, I can not edit anything. I have been reading about sudo nautilus which did allow me to change administrator rights for the folder, but still I do not get it working to display other than the default index.html page. Is there a manual or quick solution for me so I can use apache with Ubuntu?
I am novice user of linux. I need to know how to configure firewall so my system cant be compromised...In windows my system was greatly compromised. keyloggers were installed without my approval and my desktop was taken on remote. What should I do so without my knowledge no software can be installed and i can close all ports and only open which ever port is required to open. What should i do so my desktop cant be taken on remote?How do I configure user rights ? So except me no one can install any software. I will have another general user id for internet surfing
I have my own 16GB sandisk cruzer flash drive, I've already mounted him and can read on my own user, but I can write on it only using root. how can I give my user Chmod +x on the folder /media/XXX ?
I have created a new user using sudo adduser "user1" from the root .but this user does not have full admin rights...How to give full access to this user1?
when i logged in as user,it shows packages are there for update?,when i click yes it shows insufficient rights.But when i logged in as root i can perform software updates.
I am novice user of linux. I need to know how to configure firewall so my system cant be compromised...In windows my system was greatly compromised. keyloggers were installed without my approval and my desktop was taken on remote.What should I do so without my knowledge no software can be installed and i can close all ports and only open which ever port is required to open. What should i do so my desktop cant be taken on remote?How do I configure user rights? So only root and one admin can install softwares and no one else.
How can I mount a device with specific user rights on start up? I still have some problems figuring it out. I would like to mount the divide with uid=1000 and gid=1000. My current entry to the /etc/fstab/ file looks like this:
I have a few FTP users on my linux server(running vsftpd). They all have their own directory and can upload and delete files in that folder.Now, I was wondering whether it would be possible to create special permissions/rights for users. For example, I would like to make it so that certain users could not upload .exe files, or I want a certain user to only be able to upload image files (gif, jpg).
One of the feature in my application involve changing of hardware setting. This require the user to be root or have administrative right.Before my application enable that feature, I want it to check whether the user is "root" or not, or whether user use "sudo" command to run the application or not, or whether the user has administrative rights or not.What are the codes or library that can do this?
NOTE: Sometimes, advanced linux user may set the user id of root to something else other than 0. So, getuid() may not be helpful in this case.
I have this group "cn=admins,ou=groups,dc=home,dc=com" And I've configured slapd in the new way so I'm not using slapd.conf (I think). First I thought about just modifying the files at /etc/ldap/cn=config/....... but that didn't work. How do I make that group into an admin-group with all the rights ?
Is it possible to give user only FTP access / browsing rights for certain directory within /srv/www/htdocs and prevent same user to browse all other directories, even user's /home directory on that server?
Using Dolphin in Super-User mode, I can copy files and directories from the share to itself with no errors. Using Dolphin in Normal-user mode. I get the failure "Could not change permissions for...". The file is copied, but its owner,timestamp and permissions are wrong. If a subdirectory is involved, the copy aborts.
Using Windows XP I can copy files and directories from the share to itself with no errors.
Testing: If I mount with uid and gid, then my normal user can not access the share. mount.cifs //10.x.x.x/Data /home/stevej/Synology/Data/ --verbose -o user=stevej uid=stevej gid=users
[code]...
Synology DS211 - There are 2 users on it. One of which is stevej and the other is julie. Rights RWX are applied to the users and the group called users. All files have stevej as the owner and users as the group with RWX Opensuse 11.4 - There are 2 pc's. One is run as stevej. The other pc runs as julie Windows 2000 - Runs as stevej and maps to the share as stevej.
Works as expected Windows XP - Runs as julie and maps the the share as julie. Works as expected Ultimately, I want the shares to automount at boot, or login and give the user full access. I have been to Swerdna's page and done as much as I can, but still no luck.
I have OpenVPN setup and running on my home server (Lucid Lynx). I move around alot and use Portable OpenVPN to connect to my home server. The problem is a lot of the computers I use I do not have admin rights to install the necessary routes to connect. So my question is this. Can OpenVPN be configured to use PPTP protocol? Because I have PortableVPN on my U3 flash drive and that VPN client does not need admin rights to run. If OpenVPN cannot do this, and from my understanding of its archetecture it cannot, but I must admit i am no authority on the matter. Can you suggest a workable solution, ie. install and setup this server software and use this portable client software.
I have Unbuntu 2.32.1 Build date 14/4/11 I have Samba Installed I also have 8 Sata drives all with NTFS most of them have a lot of data on them. All my drives were used on an old windows 7 system, and now I wish to have them in a server setup.
My clients are all windows users apart from 1 witch is an Unbuntu desktop user. The problem I have is access rights or permissions none of the clients can gain access to my NTFS shares. I am using a GUI on my server (Gnome) as I am not very clued up with command lines in Unbuntu just yet.
I am trying to implement a NAS running Debian to replace the Windows 2003 file server.We implemented the system and we integrated it with the active directory. Is it possible to manage the access rights using windows tools and get the same amount of detail(not the right word) on access.As an example, we have the following folder structure:
Teams&Projects All users list, admins full Team1 All users list, admins full, some users modify Project1 All users no access, admins full, some modify, some list
I have read some articles on the internet that this is possible but I do not have enough information to implement this.