Ubuntu Networking :: Connection Randomly Seems To Massively Slow Down
Nov 30, 2010
I am running the newest version of Ubuntu on my laptop. The connection randomly seems to massively slow down. After a speed test is run it registers at .05 download and Ubuntu crashes before it gets to upload. I reboot from the crash and it runs fine for a while, then it suddenly does the same thing. The connection is running fine on my Windows 7 desktop, I don't know what is going on. In transmission the upload speeds are running at ~100kbps though. If I try downloading a mere 400kb .torrent file it stops half way through, usually at 200-300kb done, downloading at 1.2kbps the entire time. This is getting very frustrating and I really don't want to go back to Windows.
View 3 Replies
ADVERTISEMENT
Feb 20, 2010
I have a windows installation (partition) but have installed into freespace on the same drive using the auto-partition manager, etc, and everything is fine. I got my network going fairly easily by going Preferences > Wireless and inputting SSID and WPA encryption key (PSK). My router issues an WLAN IP, I can get on the net, I can see my other Windows PCs on the network, I can reach my router, and all is good.So after several hours of mooching about and looking at things, I have updated all the Linux packages via Synaptics (following a prompt to update everything) including GRUB. My dual boot now shows two versions of the OS:
GRUB 1.7~Beta4
Ubuntu, Linux 2.6.31-19 - generic (I am booting this one)
Ubuntu, Linux 2.6.31-14 - generic
I also set up my HP F4580 printer over wifi on the network though with slightly incorrect drivers (for the F4400 series as this was recommended at the closest match). It works, and I can print a test page no problem.The only thing is that now (since doing all that) Ubuntu seems to periodically drop my connection to the network and then request the network PSK again, but when I enter it, it spends time trying to renegotiate but fails, and then re-requests the PSK, over and over and it never reconnects. I have to reboot and then I can connect again (automatically), until it drops at some random point (like 5 or 10 mins later)
View 9 Replies
View Related
Jun 5, 2010
I could not find a solution to this problem anywhere. I use a ubuntu server to play (stream) mp3s and movies to other computers on my network. It works most of the time, but sometimes in the middle of a movie or a song it will drop/hiccup--saying it is "not reachable". I am not overtasking the server at all, and merely playing an mp3 that takes up less than 10% of the bandwidth, yet it drops it for a split second.
I have a WRT160N router (DD-WRT of course) with 4 clients connected (2 of which are wired). The ubuntu server is connected via ethernet and all machines have the same issue. It can't be the router because another Windows machine works just fine for streaming these files. I just can't understand how it can lose connection for a second or so. It may just be the file-system or some service that is hiccuping, but I have no idea...
View 1 Replies
View Related
Aug 18, 2010
I do randomly (as far as I know) loose my wireless network connection. The only thing to do then is to restart my router and after that it works for a while. I know this is not a hardware issue because I don't have this problem with KDE, only in gnome. I think this problem occurred after I started using 10.04, but then I changed to KDE and forgot about it. But now I'm using gnome again and loosing my network connection over and over drives me mad
View 1 Replies
View Related
Nov 20, 2010
My internet connection drops randomly in ubuntu but works fine in XP.The connection is not disconnected but i cant browse any sites,so what i do is i will reboot my system so that i can surf again but after few minutes the same problem is happening again
View 9 Replies
View Related
Jan 25, 2010
I have an Asus laptop with a BCM4318 wifi chipset. result of lspsci command about wifi cards:
Code:
00:09.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) For some reason, I often get disconnected. Once it's disconnected, I cannot connect anymore and I need to reboot my laptop in order to get the connection back! I didn't have this problem when I was on Ubuntu 8.04. I checked in /var/log/syslog and I found this when the network is disconnected:
[Code].....
View 9 Replies
View Related
Feb 6, 2010
My ubuntu karma desktop is plugged into a wired connection that goes through a router and into my cable modem.Everything was working fine like it had been foseveral months yesterday morningSomething happened by the end of the day that has screwed up my wired networking. I plugged my laptop into the same cable thats plugged into my ubuntu, and the cat5 cable is live. Also when I plug said cable into the ubuntu box, the ethernet lights come on, or atleast a solid green one. Meanwhile the network connections Icon continues to have a red X and a tooltip saying "No network connection".
Under network settings, there is only one wired network "Auto eth0", but it says "last used: never" which is strange since I've been using this for months. When I click edit the main settings are MTU automatic, ipv4 automatic DHCP, and ipv6 ignore.hat could the problem be? By chance did a karma update get released that broke the networking
View 1 Replies
View Related
Sep 1, 2010
The title pretty much says it all. My eth0 will disconnect at random intervals. lspci:
Code:
...
01:08.0 Ethernet controller: ADMtek NC100 Network Everywhere Fast Ethernet 10/100 (rev 11)
...
And lsmod | grep tulip:
Code:
tulip 50592 0
Ubuntu 10.04 Linux desktop 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:21:58 UTC 2010 x86_64 GNU/Linux
When it disconnects, it easily reconnects when I disable/enable networking. But until I do.... Update: It disconnected again right after I posted this. Here is what dmesg | grep tulip:
[Code]....
View 1 Replies
View Related
Dec 8, 2010
I have installed XUbuntu 10.04 but cannot connect to WiFi. Here is what I know so far:
Hardware and Software configuration:
Compaq Presario 2100US
XUbuntu 10.04 (installed Dec. 2010 from Live CD dated Oct. 2010)
Kernel 2.6.32-21-generic
Gnome 2.30
RAM Memory: 938.7 MiB
Processor: Celeron
Disk Space Avail 23.2 GiB
Wireless Card: MSI Wireless 11G CardBus CB54G2
*MSI Driver rt2500pci located in system (see below)
No wifi 'on' 'off' hardware switch on machine
Prior to the install of Xunbuntu 10.04 (Lucid Lynx) the machine carried MSXP. The wireless card came with the machine. The machine used a cable connection by previous owner. Connection's been working fine in Ubuntu Jaunty Jackelope and Puppy Linux. Wireless card appears to be functioning. The system scans for the network, shows that connection is established by both icon in tray and message saying that a connection is made. The card shows both green lights active. The light that indicates a connection is on and randomly flickers. Tested Firefox for connection. Firefox is not receiving anything from the system. I have got the network manager functioning enough to say that I have a 'connection' but still cannot connect to server.
Network Connections
wireless: linksys - mode ad hoc - MTU auto
wireless: security - none (I borrow from a neighbor's wifi)
IPv4: auto(DHCP)
IPv6: Ignore
*Driver rt2500pci located in /sys/module/rt2500pci/drivers/
(There is a 'config' file in this directory)
Help menu in 10.04 is listed as help menu for 9.04 so don't know if applicable to 10.04 debugging. When 'troubleshooting' wireless connections, I did a *sudo lshw -C network* command on terminal. The results *do not* show 'Claimed, Unclaimed, Enabled or Disabled as help menu indicates. The line that would show that information (*-network) doesn't have 'Claimed, Unclaimed, Enabled or Disabled'. I can send image of this query. I have tried two other wifi cards with similar results, no connection.
View 9 Replies
View Related
Jun 30, 2011
Since I installed Ubuntu I've had this problem that makes me loose connection to the Internet. The wireless-icon on the panel starts loading, and after like 5 minutes, it works again.I had this problem when I had Mint 11, but it happened more often.Anyone know how to fix? Edit:Network: Card-1 Atheros AR9285 Wireless Network Adapter (PCI-Express) driver ath9k Card-2 Marvell 88E8040 PCI-E Fast Ethernet Controller driver sky2
View 2 Replies
View Related
Sep 1, 2011
I have a problem with my wireless connection in ubuntu (natty with amd64bit) There seems to be intermittent disruption in my connection. Havent seen a pattern as yet, though it happens once a day. After that I cant get it to work at all and only restarting + reconnecting the USB device helps. Dont know what is going on.I have already read these pages : Commands and Wireless Troubleshooting.Here is my line of though1) Given that I am able to connect other devices to it while I am not able to connect through this desktop, I think the router is OK.2) I am able to work with it after restart + re-connection . And so the driver is OK and is loaded. The driver seems to be oK and loaded even while I am not able to connect.So why is this happening and how can I get this under control without having to reboot and re-connect the device everytime.Here are the output for the commands which will give you a more detailed idea of the process. Before reboot while I was not able to connect:
Code:
Script started on Tue 23 Aug 2011 01:40:08 PM CDT
raja@UshRaj: ~raja@UshRaj:~$ sudo nm-tool
[code]....
View 3 Replies
View Related
Feb 20, 2011
Hey all, I have got this strange problem with my Slackware server acting as router and gateway to my internal network. It randomly disconnects the WAN connection after X days ( it is between 2-7 days ). This error messages occured in /var/log/messages just before it lost its WAN connection:
Feb 20 14:36:00 tml dhcpcd: eth1: failed to renew, attempting to rebind
View 10 Replies
View Related
May 2, 2010
Since I upgrade to Ubuntu 10.04 my wireless connection is very unstable. I install the needed wireless drivers from 'Hardware Drivers' (Broadcom STA wireless driver) and I got wireless connection, but it randomly disconnect, and also connection is very slow.
I think that the problem are the drivers which are not very compatible with this version of Ubuntu, which means we need to wait for update? I have HP ProBook 4510s laptop, Intel PRO/Wireless 5100 AGN network card & Gembird NSW-R2 router. I'm only having this problem on Ubuntu 10.04, on other OS's the internet is fine.
View 7 Replies
View Related
Jul 17, 2009
I'm having a bizarre problem where my network connection stops working randomly. At first I thought it was a DNS issue since Firefox simply chilled out on "Looking up [hostname]" until it timed out, but after further investigation (pinging IP's, "host" and "dig" being unable to reach servers) it became apparent that I couldn't even access the DNS servers i.e. the Wicked Connection of the East was most sincerely dead.
There are two strange things about this: one, there are no errors except "timeout". The network manager is happy, Firefox is happy until the lookup fails... Two, the failures only start *after* DHCP configuration. DHCP configuration never has any trouble sending or receiving packets. I'm going to try static IP and whatnot to see if that helps, more information later.
View 3 Replies
View Related
Jan 9, 2010
I'm running Ubuntu Karmic on my desktop machine which is connected to my wireless router (via LAN cable).
I have two laptops on the LAN as well. One is my wife's Windows 7 laptop and the other is my Ubuntu Karmic laptop.
They both connect wirelessly to the LAN and all three computers have static IP addresses assigned.
So here's the issue. The desktop serves the laptops over the LAN with Samba file sharing, SSH, VNC and DAAP.
From the Windows 7 laptop, the connection over the LAN is fine. I generally use it to connect to the Samba shares and occasionally use it for VNCing to my Desktop's....desktop. It is fast and responsive.
From the Ubuntu laptop though, everything seems very slow. Connecting to the samba shares results in a wait of at least 30-60 seconds, even if they have only recently been accessed. Once it has connected (i.e. once the share opens up and you can see files) actually opening the files themselves is delayed too, but not to the same extent.
Also, connecting to the desktop via VNC is intolerably slow, with mouse movements being so delayed that it is almost impossible to click on anything.
SSH takes a long time to connect too (up to 30 secs) but obviously once connected it is fine. In a similar vain, FreeNX connection takes a long time to connect but once the desktop has loaded it is fine too.
I can use FreeNX instead of VNC but actually like using both for different functions. I understand VNC is slower than FreeNX but over a 100Mbps LAN connection I wouldn't expect it to be slow at all.
This laptop used to be a Windows Vista/Win7 laptop prior to being replaced with Ubuntu and it was able to connect to the server with no speed problems.
View 1 Replies
View Related
Jan 11, 2010
I've just installed the ubuntu 9.10. I have one problem with it. I have a home net in configuration: Windows XP on a cable, Ubuntu on a cable and Windows on wifi. When I'm surfing on the net on Ubuntu, Wifi isn't work how it should. It's very slow and I don't know what to do with it. Windows XP on a cable is OK, it works good. What happen and how can I repair it?
View 2 Replies
View Related
Apr 30, 2010
Since I've updated from 9.10 to 10.04, I'm having some difficulties to use the internet. Even though I can connect to my home wireless network, the connection is really slow. I've got a Dell Inspiron 1545, and here comes the configuration:
Code:
sussa@sussa-laptop:~$ sudo lshw -C network
[sudo] password for sussa:
*-network
description: Wireless interface
product: Wireless WiFi Link 5100
vendor: Intel Corporation
physical id: 0 .....
Apart from that, I must say that Ubuntu 10.04 is fantastic. Easy to use, elegantly designed and working perfectly on my PC
View 9 Replies
View Related
May 10, 2010
Lately I have been using my window's partition due to the fact that 10.04 drops my wireless signal every 5-10 minutes, but today I downloaded the new updates and that seems to have fix the issue with the dropping of the wireless connection. Now the only problem is the internet is so slow when trying to go to webpages it times out. I have opened up firefox gone to about:config and changed the necessary lines, but still dreadfully slow.
View 2 Replies
View Related
May 21, 2010
I am running Kubuntu 10.04 (32-bit) on a Sony VAIO VPCCW23FX, when I connected to my router through Wireless the connection is too slow and random, 3 kB - 50 kB. But when connect to the router through Ethernet cable I get the normal speed 265 kB. I read many posts but can't find solution, and already updated all packages. the Wireless card is:
Code:
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
the output of iwconfig:
Code:
wlan0 IEEE 802.11bgn ESSID:"zzzzplw9"
Mode:Managed Frequency:2.437 GHz Access Point: 00:25:68:9B:0D:FE
Bit Rate=1 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
[Code].....
View 9 Replies
View Related
Oct 8, 2010
It has a button next to the power to show the wireless status, on or off. If I turn the laptop on with the wireless active, it keeps flickering between on and off states, and gives me a really slow connection.It happened in 10.04 if I booted with the wireless activated, but could be fixed by resetting the wireless. Now in 10.10, it happens constantly, and I just wont stop.My laptop is a CompaQ Altec Lansing running 64 bit.
View 9 Replies
View Related
May 2, 2011
I have a linux server that has seemingly random network slow downs. This server is mainly my dvr. I'm starting to think it's a hardware problem, but that's just a gut feeling. I don't really know how to determine if it isn't.
Slow summary:SSH, HTTP, VNC incoming traffic are all affected
Outgoing traffic seems ok. I haven't tested this as much.
Rebooting mostly helps.
Stopping/starting network doesn't help
Load average is below 1.0
Updated Kernel with no change
[Code]...
View 6 Replies
View Related
Dec 15, 2008
I use Slackware 12.1 and I have a big problem that I can't solve by myself. I'm connecting to a LAN where there are almost 20 PC connected, all with static IP.
my ip: 192.168.1.205
netmask: 255.255.255.0
gateway: 192.168.1.1
DNS server: 80.58.61.250, 80.58.61.254
I configured manually it but it doesn't works well. I set up the DHCP server on Windows 2003 so I tried to configure it with dhcp too. It gives addresses from 192.168.1.200 to 192.168.1.240 there are no PCs connected with DHCP at the moment, so my IP is only mine.
My problem is the following:
bash-3.1# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1e:68:3d:1b:ad
inet addr:192.168.1.201 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21e:68ff:fe3d:1bad/64 Scope:Link
Up Broadcast Running Multicast MTU:1500 Metric:1
RX packets:77 errors:0 dropped:0 overruns:0 frame:0
TX packets:44 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7041 (6.8 KiB) TX bytes:6282 (6.1 KiB)
Interrupt:17 Base address:0xc000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1810 errors:0 dropped:0 overruns:0 frame:0
TX packets:1810 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:90500 (88.3 KiB) TX bytes:90500 (88.3 KiB)
bash-3.1# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
localnet * 255.255.255.0 U 0 0 0 eth0
loopback * 255.0.0.0 U 0 0 0 lo
default 192.168.1.1 0.0.0.0 UG 1 0 0 eth0
bash-3.1# ping www.google.es
PING www.l.google.com (66.102.9.99) 56(84) bytes of data.
64 bytes from 66.102.9.99: icmp_seq=1 ttl=243 time=78.7 ms
64 bytes from 66.102.9.99: icmp_seq=2 ttl=243 time=84.2 ms
64 bytes from 66.102.9.99: icmp_seq=3 ttl=243 time=75.1 ms
64 bytes from 66.102.9.99: icmp_seq=4 ttl=243 time=82.1 ms
64 bytes from 66.102.9.99: icmp_seq=5 ttl=243 time=82.8 ms
64 bytes from 66.102.9.99: icmp_seq=6 ttl=243 time=79.4 ms
64 bytes from 66.102.9.99: icmp_seq=7 ttl=243 time=82.3 ms
64 bytes from 66.102.9.99: icmp_seq=8 ttl=243 time=75.2 ms
64 bytes from 66.102.9.99: icmp_seq=9 ttl=243 time=80.7 ms
64 bytes from 66.102.9.99: icmp_seq=10 ttl=243 time=84.7 ms
64 bytes from 66.102.9.99: icmp_seq=11 ttl=243 time=75.0 ms
64 bytes from 66.102.9.99: icmp_seq=12 ttl=243 time=82.2 ms
64 bytes from 66.102.9.99: icmp_seq=13 ttl=243 time=85.1 ms
64 bytes from 66.102.9.99: icmp_seq=14 ttl=243 time=80.9 ms
64 bytes from 66.102.9.99: icmp_seq=15 ttl=243 time=87.7 ms
64 bytes from 66.102.9.99: icmp_seq=16 ttl=243 time=87.6 ms
64 bytes from 66.102.9.99: icmp_seq=17 ttl=243 time=83.2 ms
(...)
- www.l.google.com ping statistics -
49 packets transmitted, 48 received, 2% packet loss, time 560804ms
rtt min/avg/max/mdev = 73.624/80.945/87.725/3.823 ms
It takes a lot of time connecting to a internet web site! It's really strange because downloading a file the transferring rate is good, it takes some time starting, but it works normally. I wait almost 7 seconds after seeing a web site. All the others PC's (windows xp) can connect perfectly to network using static and DHCP. Trying with another wire in another room I've got the same result. My /etc/resolve.conf is configured with the IPs specified upper in this page.
View 5 Replies
View Related
Jan 17, 2010
I set up my linux router as a simple NAT router. I use CentOS 5.4. When I set up ISP proxy IP in the browser of client PC, Internet access is fast. When I remove ISP proxy IP from the browser, Internet access is slow.
ISP use transparent caching but I can use manual caching as well. Clients on my network with transparent caching get slow internet access and using ISP proxy get fast internet access.
ISP announce that we can use transparent caching or manual caching.
So, I set up my linux router with squid. I set up cache_peer TAG point to ISP's proxy IP. But the problem is the same. Using my squid proxy is slow and using ISP proxy directly is fast. All other network settings are correct.
How can I improve my internet connection using transparent caching. I don't want to set up proxy IP address on all clients.
View 5 Replies
View Related
Jan 2, 2010
I recently installed ubuntu on my laptop and the wifi is horrible. The connection was very slow and dropped every 5 minutes or so. I have tried enabling the proprietary madwifi drivers - however then it wouldn't connect at all.
View 1 Replies
View Related
Apr 5, 2010
I am currently staying on a university campus in Taiwan. Internet on Ubuntu Lucid 64bit here is often painfully slow, except for connections to Taiwanese websites. I dual boot with Windows 7, and there is no problem there. For instance, I downloaded the same piece of software (Spideroak) on both Win and Ubuntu, with Ubuntu I had to try repeatedly as the download would not complete, and in the end it took several hours to download. On W7, it took 10 minutes. What is Windows and Ubuntu doing differently?
I tried disabling ipv6 for this session by running sudo sysctl -w net.ipv6.conf.all.disable_ipv6=1, as a number of posts mention improving connection speed that way, but no effect.
I know that websites from Taiwan are working well, because I am getting my Ubuntu updates from a Taiwanese mirror: updates are fast, except for packages in the 'partner' repos (presumably not loaded from the mirror) which take hours to load, if at all. I don't want to depend on Windows for large downloads... (I don't want to depend on Windows for anything).
View 3 Replies
View Related
Oct 27, 2010
I have Ubuntu running on my HTPC and for the longest time all this was working fine. Now all of the sudden my Internet connection is all sorts of slow. Chrome browser, transmission bt, apt-get, all have the same speed issue. I tried disabling IPv6, changing my DNS and installing all the latest updates. Nothing works.
View 1 Replies
View Related
Jan 3, 2011
I bought a new Laptop 2 week ago. It works well, but internet connection ist very slow. I use cable internet speed 25Mbit/s, normal with my old Laptop (Window xp) I can DL with speeds ca.1 Mbit/s but with this new ca. 15 kbit/s (same file). too much different!!! If anyone know, how to troubleshoot this problem, please tell me. And i get a advice that i should crate a new connection using the "workgroup" model instead. I've tried to do but failed. Who knows "how to" please explain it for me.
View 3 Replies
View Related
May 12, 2011
I've installed recently Ubuntu 11.04 and the first problem that I had was with my wireless lan card Wl-138g V2. The card was not enabled by the system, however after following one of Ubuntu's forum thread I managed to solve it, but... and there is always a but the internet speed is very low.When I had windows installed I faced the same problem and it was solved with an update in the driver, does any one experienced the same in Ubunutu? How did you solve it?
View 4 Replies
View Related
Sep 19, 2010
I just got a wireless card and I've been having connection issues under Linux. The chipset I have is a Ralink 2860 (the card itself is an Asus PCE-N13) and supports 802.11n speeds up to 300 mbps. I am connecting to a DLink DIR-655 router, which also supports 802.11n at 300 mbps. I get full bars when connecting to my router, and my router's connection information shows my computer connected as 802.11n with the signal at around 80%, but the data rate is usually around 5.5 mbps. (I've rarely seen it go up to 18 mbps) I can confirm this woefully slow speed with anything I try to do over the network. Additionally, my wireless connection will sometime be disconnected and network manager will often fail to connect. When it fails to connect, my router lists my comptuer with the correct IP address, so I know it is successfully connecting to the router and the router is accepting the connection, but network manager seems to not recognize this.
I am running Debian Squeeze (testing), but I have a custom kernel, which is 2.6.35 and is using Debian's kernel configuration. I have the newest firmware from Ralink's website, and I also tried the newest drivers, which made no difference. (I have since removed those drivers, since I'd prefer to use the drivers supplied with the kernel if possible, but I can install them again if necessary) I put this card in my main computer and booted under Windows, and it was able to connect with 100% signal (it's right next to the router) and at 300 mbps. I also tried it under Debian on my main computer (with the stock 2.6.33 kernel), but it only connected as 802.11g, and even at 100% signal it was only connected at 36 mbps. For comparison, my laptop with an 802.11g card and running Mac OS X can achieve the full 54 mbps at 84%.
[Code]...
View 7 Replies
View Related
Dec 3, 2009
I am have setup a temporary ssh server to reverse ssh to remote clients. When a client has an issue I have them reverse ssh to my server and then from my laptop or workststation connect to there workstation. The problem that I am having is when I connect to them from behind my firewall from my laptop the connection is really slow but when I connect to them from the firewall it is fast. I am using Firestarter which is simply a GUI for iptables. I am trying to figure out what iptables rule is causing the connection to slow down behind the firewall.
View 7 Replies
View Related
