Ubuntu Servers :: Cannot Change File Permissions On Server
Aug 25, 2010
I'm working on a remote Ubuntu 9.10 server, which is accessed via VPN. I installed Joomla, but had difficulty uploading new components, which I traced to a file permissions problem. I used FileZilla to FTP onto the site and tried to make the chmod changes I needed, but the commands kept failing. Eventually, I contacted the sys admin and told him I thought that there was an ownership problem with the directories. He checked and told me that I was logging in with exactly the same user name and password that he was using (it's not a live system currently) and that he could make chmod changes without any problems. Because all my attempts were still failing, he eventually did the following:
chown -R administrator:administrator /var/www
/var/www is where all the Joomla files are stored and Administrator is the user name.Now I find that when I run a chmod command in FileZilla, the server reports that it worked (see below):
However, if I go back and check the tmp folder permissions, I find that they are still set to 777.This still looks like an ownership problem to me, but I don't understand why the server seems to think that the chmod changes are working, when they aren't.
Every time I try to change file or folder permissions on a separate internal drive in ubuntu 10.10 desktop in sudo file manager, It sets it right back to the way it was before and doesn't save the permissions I want to change it to. The files aren't critical system files that are not even existent on this hard drive.
Its on a completely separate drive, Yet aren't I suppose to be in control of what gets changed to what? Instead of a Operating System doing something just for my safety? A simple AVI files permissions being changed shouldn't hurt anything. How to I stop ubuntu 10.10 from auto setting the permissions of my folders and files? Its really starting to me off right now. I've been looking around on google for Auto reset permissions for ubuntu, Haven't found one word about it. Yet I'm just going to assume someone might know how to resolve this? Or has dealed with this before.
I'm just trying to Forcefully set my folders on my separate drive all to 777 because they are all 775 and 755 and I can only access them with Write privileges if I run the SUDO file manager which I really hate having to do every so often I'm sure you can relate to how annoying it is to have to open up terminal and type something in to open a fully priviledged file manager.
Trying to setup a file server for a small group of users and I am in need of help with file permissions with Ubuntu Server 10.10.
I have a single share mapping (ex /media/hdd1/share1). There are several folders that everyone will need read/write/edit permissions and there will be a few folders that all users will need read permissions and a couple of users will need read/write/edit permissions.
I have tried several things and as long as I create the folders/files through ssh using sudo, the permissions are fine, but when the users create file and folders through their computers (mixture of Windows and Mac) that user becomes the owner and no one else can write or edit those files.
I am using SAMBA and though it was a config issue with that but I logged each user directly into the server with the same issue.
I tried sudo chmod 777 /media/hdd1/share1 but all newly created files have the above issue.
Finally I managed to install my printer/scanner drivers.The last thing I need to do is to add the following two lines to 40-libsane.rules (which is a read only file):# Brother scanners ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes".How can I change permissions for this file or add these lines without changing permissions?
I'm new to Ubuntu Linux but have many years on windows platform. Please can someone help me with how to change the following items.
No.1 I would like to change the HORRIBLE!! YAK!! brown background color behind the word Ubuntu in the start up screen when the machine loads up (before the login). I have located the image file for this which I have found to be: /usr/share/images/xsplash/bg_2560x1600. jpg but the OS says that root is the owner and that I don't have permission to change this. So how can I change this for a color I do like.
No.2 I would also like to change the login dialogue screen style. I know this is possible but again I'm fumbling to see how I can do this. I have tried with the start up manager but every attempt fails, the settings don't take. Once again I suspect permissions are at the bottom of the problem?
No.3 Would like to have a colorful splash screen image on boot up, I've managed to remove the old one (small white 3 ring ubuntu logo on black background) but havent been able to install or replace with a new one. Its been incredibly frustrating, I'm feel sure I'm missing something simple here. Wondering if its permissions yet again?
Anyone who can offer help on any of the above, guidance or advise me would be much appreciated. Please bear in mind that I'm still very much feeling my way with Linux so keep it simple.
i'm having issues with a folder which I cannot write to or seem to do anything else with? i figured i'd delete it and start again but i can't even do that!!
Code: server@server:~$ sudo chown server /media/server/swap/downloads/incomplete/ chown: changing ownership of `/media/server/swap/downloads/incomplete/': Operation not permitted
I have an ntfs partition that I wish to access as a normal user(non-root). For this I did the following. As root I created a folder /windows and did a chmod 777 -R on /windows. Then I added the following line to /etc/fstab
Now, the partition is mounted alright but the problem is that when any other user (non-root) creates a files in /windows (say by executing touch newfile) the newly created file has the owner and group set as root. The non-root user can create the file and he can also delete the file, however, he cannot change the permissions of the file and also the owner:group is always set as root:root. How do I get across this problem, i.e. how do I mount a partition, so that a non-root user can also change the permissions and ownerships of the files he creates.
So i pulled some files off my buddy's computer via my wireless home network, i can access them but in the permission tab the owner is "nobody" so i can move the files. How can i change the permissions to enable me to move the files?
I had an old windoz 2003 server running a few recreational web sites. I've grown tired of all the hacking attempts, FTP floods, etc. Ok.. I've grown tired of windoz period.When I set the server up, I had the operating system on one physical drive and stored all of the web files on a separate physical drive just in case I ever wanted to make some changes to the operating system.in my adventurous ways, I've dumped windoz and installed ubuntu 11, 32 bit server edition on this machine. It is running fine from what I see on the server side. The first problem I've noticed is when even attempting to navigate to localhost through the server's web browser, I get a permissions issue.
So... off to the drive where the httpd.conf file points to. This is the second physical drive. When checking permissions and attempting to change them to the correct ones for the folder, I can't change them. I've tried through the GUI and the terminal as root. Neither way will change the permissions.I've stepped back and checked the permissions on the physical drive the files are stored on. I am having the same issues with the drive itself. How in the world can I change the permissions either on the drive or the folder? Is there something I should do as far as the drive's mounting?
I'm still getting my head around setting things up on my web server, I've configured php to run off of Fast CGI, rather than mod_php, due to better memory consumption. I've managed to get my virtual hosts configured to work with fastcgi, ensuring the following options are set:
I tried adding those settings to /etc/phpmyadmin/apache.conf, but this doesn't seem to work. Whenever I go to www.mydomain.com/phpmyadmin , I just get a 403 Forbidden Error. This used to work no problems on mod_php.
[URL].. because the alias is set so that my virtual hosts can access it through /phpmyadmin. There is probably something basic I am missing here.
I would like to change the permissions for a directory and all files inside the directory how do I do this? The website is located only on my local network so I am not worried about security. Also what would be the optimal permissions for running wordpress.
In my /var/www directory, I have everything set up with: user: www-data group: developers directories: chmod 570 files: chmod 460
Everything seems fine. Users from the developers group can edit files and all, but now we began using the Git repository, and whenever a user edits a file (ie. Joe who is a developer,) file permissions get screwed again. Now they're: user: Joe group: Joe directories: chmod 755 files: chmod 644 How can I fix this so permissions remain the same?
im trying to execute a file. When I try i get the message:
The file ...Installer.exe is not marked as executable. If this was downloaded or copied from an untrusted source, it may be dangerous to run...
So when I right click on the file and select properties>permissions and check the 'allow executing file as program' it instantly unchecks the box. I can't check the box.
I'm trying to install a script and I need to change the permissions of a file within the script, but I am being denied from doing so. I know that I could change the password of ROOT, but I don't really feel like going through that again when I can just use 'gksudo nautilus' in Terminal. How can I change the permission without being on Root?
I recently did a fresh install of Ubuntu Maverick, and have found a slight issue with file permissions. Before starting the installation I backed up all my files to an ext3 partition, then during the process I moved all of these files over to an NTFS partition that I am using as a joint storage location for both Ubuntu 10.10 and Windows 7. Upon booting into my fresh Maverick install I found that all the files on my NTFS partition are now owned by root and I am unable to change the permissions using the conventional methods I am used to. I have tried using the GUI method through the properties of the folder, I've also tried using chown and chmod, but all to no avail... No matter how I make the change to the permissions, it will always revert back to root within seconds. who desperately wants full read/write access back to their data?
I recently backed up my home folder onto another HD. When I tried to transfer the files from the other HD back to the original HD after a fresh ubuntu install I noticed all my files were restricted to root access. Even after moving the files back via root access I can still only access them that way. Is there a way to mass change the permissions to all the files and folders within my original home folder?
my dad has been using Ubuntu for a few weeks now and likes it, however he's having some issues regarding read-only files. He's a doctor and frequently has to download word files to edit, however they always download as a read-only file. While this isn't particularly difficult to do, he finds doing it tiresome and because he isn't the most proficient PC user, may have difficulty with it when I return to school after the summer. I was hoping that there's some way to change the default settings so that all files downloaded are writeable.
Additionally, he has a number CD-RWs which he both retrieves files from and stores them to, however when trying to access these CDs he is told that they are read-only. Right clicking on the CD and trying to change the access permissions doesn't work (says that permissions can't be changed because the disc is read-only).
I've been having a very strange problem, and not sure for how long... but basically, my system wont allow me to change file permissions, even in root mode! I run Ubuntu 10.10 with Gnome and LXDE, kernel 2.6.35-30-generic. It's particularly problematic if I want to run some binaries or programs that you need a shell script to start up (i.e. any new version of Firefox). The usual right-click then going into permissions doesn't work, it just resets whatever changes I make. The weirdest thing is that using the chmod command as root also has no results! The files keep the exact permissions they had before...
I have two drives in my computer: a 160GB and an 80GB. The 80 holds Ubuntu, the home folder, etc. The 160 is for other files. I need to change the read-write permissions on the 160, but I can't. If I do it through the GUI (right-click>permissions) it just changes back instantly. If I do it through the command line (even with sudo), it has no effect.
I have been VERY lucky and managed to restore from a formatted ext3 /home/ partition. I used testdisk to reset the original partition which had had nothing done to it since formatting(!). However some of the file permissions are a altered and I cannot change them. I have tried "su chmod" and even temporarily enabled the root account itself and tried to alter the ownership/permissions from root 'proper' without it helping.
Here is an example of the output of ls -l drwxr-xr-x 2 martyn martyn 4096 (date) (time) sponsors ?-----S--T 63231 92820383 44090688 4286824785 (date) (time) order.xls
The first line looks like a normally formed output and indeed is readable. The second line looks corrupted and I don't have a clue how I can reclaim this - or even if it is possible. Should I count my blessings most of my files are intact and leave those be?
Trying to change permissions on a file in /proc/sys/fs/inotify. The command syntax are:
Code: sudo chmod u+w max_user_watches and the result is:
Code: chmod: changing permissions of `max_user_watches': Operation not permitted Also tried to change it when logged in as root, same results. Parent directory permissions are dr-xr-xr-x, and are the same up the chain. Tried to change the directory permissions to u+w, that didn't work either. FWIW, /proc is part of the / partition, and it has ~600MB free space.
I have a program what creates files with a certain user and group as owner. How do I make files created by this program belong to a group I specify myself (I know I can chown and chgrp and chmod but I want the files to have a certain group from the beginning). Also I like to be able to specify permissions for these files.
Btw. it's not my own program so cant change the source code of the program to solve my problem.
I've just read that I can't change the file permissions of files and folders if they are sitting in what was my old Windows D: drive. Is this correct? If so what is the work-around?
I don't want to have to cut and paste that entire D: drive's contents over to a recognised Ubuntu folder. I had in my mind that this D drive would continue to be my data dumping ground, to which I need read/write access to.
I have just installed Ubuntu 10.10 64bit on my Qosmio Toshiba laptop.
At the completion of the install i had about a page of errors. But it boots up ok. However when i tried to install Visual Paradigm on the system i found that every time i ran the executable i get an error message saying access denied. Found away around this problem on a VP forum so managed to get the program to work with the non-install version.
The problem i am having now is i can save files. I have checked the permissions of the vpworkshop folder (properties > permissions) and all permissions are currently set to '---'. If i try and change them to 'wr'. It just reverts back to '---'.
on certain folders on a samba-server I would like to allow everyone everything.(Note: This refers to the filesystem-permissions. External security is cared for by samba. No problem here)That means: every local user and every remote user should be able to fully create, delete and modify every file in certain folders and all subfolder of these folders. This should include file contents and timestamps and permissions. And it should include modifying files owned by someone else, again meaning create/delete/modify/timestamp etc.
I've migrated to Suse from Mandriva. I installed all my backup folders/files to my "home" folder but they have come up locked. I remember in Mandriva to change the permissions I pressed Alt F2 and then entered a command. How do I do it in Suse?
any way to change file permissions of NTFS drives? All my C programming files resides in a NTFS drive and I need to set execute permision on them in order to run. I tired chmod -Rv 777 /media/Programming. and also tired chmod 775 *.* after entering the folder in which all my files resides. but both these commands doesn't seem to have any effect on the files. I know NTFS doesn't use Unix file system and chmod command goes in vain.
