Ubuntu Servers :: Safe To Install Print Server To LAMP On 10.04.1?
Jan 20, 2011
I need to first point out that I am a complete n00b when it comes to Ubuntu Server, and I managed to install Ubuntu Server 10.04.1 (on a screen-less Acer Aspire 5100 laptop) with Apache2, MySQL, OpenSSH, & PHP5. I currently have this server (hosting my website) behind a linksys router with only port 22, and 80 forwarded to its ip address. Now my question is: Would it be safe to configure a print server on the same machine in order to print from the 3 other computers on my router to one printer, or are there security risks involved (like what I have heard with LAMP servers and Samba on the same machine)? I am also wondering if it is safe the way I configured port 80 & 22? It has extremely long passwords, and I also went through the secure installation of one of the programs setting a root password too... But can somebody please help me with my server? I am very surprised I have gone this far in my first 2 weeks of my Web Scripting class too!
View 1 Replies
ADVERTISEMENT
May 18, 2011
Ran the following command from a user account listed with ALL permissions in visudo.
Code:
sudo tasksel install lamp-server
debconf: DbDriver "passwords" warning: could not open /var/cache/debconf/passwords.dat: Permission denied
tasksel: aptitude failed (100)
View 2 Replies
View Related
Jan 24, 2010
I've been searching around the net how to do this but I can't find any clues. I did this:
Code:
sudo apt-get install lamp-server^
But now I want to remove it. I've read this: http://ubuntuforums.org/showthread.php?t=510403
[code]....
View 7 Replies
View Related
Feb 6, 2010
I've successfully installed my LAMP server (9.10). I've ran a test.php but am curious if there are any tutorials onlines or even books to buy in order o learn how it all works. Where the files are and the mechanics of it. I have it installed but what now ha... I've done HTML, I've built websites but I'm lost!...
View 1 Replies
View Related
Jan 25, 2011
I had a working LAMP server on my old server. After a HD went out and was replaced I rebuilt my server with Ubuntu 10.10 server. Talk about a smooth and impressive install. I set up my Apache server and MySQL and even installed php5 just like I had done before on my old server. The only thing different I did with this install is with Apache. I now host 3 websites with virtual hosts. This is the only thing different I have done than the last time.
My problem now is my website won't display PHP. I didn't know I had this problem until I installed Drupal for a friend to play around with. Drupal won't finish the installation process because it claims: In your ./sites/default/settings.php file you have configured Drupal to use a server, however your PHP installation currently does not support this database type.
Know I have googled this phrase to hell and back to find a resolution and haven't. I even talked to my local linux guru at work and he refereed me here. I have tried reinstalling php left and right. I'm convinced that there is an option to enable php globally that I'm missing. I really think the virtual hosts is what is causing this trouble. What input will the mighty Ubuntu community provide me with,
View 4 Replies
View Related
Dec 9, 2010
I build a LAMP server behind a router. The current situation is:
1.I could access index.html of apache within the LAN.
2.I could access the vsftp outside of the LAN.
3.I could access the ssh outside of the LAN.
I have configured my router to do reflections(although I don't know it's correct or not.). I think the LAMP works good since I could use it inside the LAN. The configuration of the router is at least partly right because ssh and vsftp work fine(I test by browsing the ip:74.***.***.*** in the lan, not 192.168.1.8 --this also works. ).
I cannot access web service outside the LAN. And the error message is "Oops! Google Chrome could not connect to 74. Did I miss some configuration of router?Apache2?Ubuntu? I use the ubuntu server 2010.10 version.
View 3 Replies
View Related
Mar 11, 2011
I am wanting to install the 10.04 lamp server on a winxp pro machine with several hard drives all with ntfs. Will the lamp server be able to use the ntfs partitions ? Or do i need to change them over.There is several hundred gigs of data on the hard drives and i do not relish the job of converting them.Also can you just mount the ntfs shares that are on the windows machine with the ubuntu machine using a intranet type setup
View 3 Replies
View Related
Oct 30, 2010
I am sure there is a nice guide out there somewhere but I cannot find it. My question is: The company I work for has a fully windows environment, servers and clients. The current server is on a Windows 2000 Server and I plan on replacing that. I wish to use Ubuntu server with Joomla for this purpose. This is my first venture into a purely command line interface, although I have played around with Ubuntu desktop in the past. My first question right now is: How do I log onto the Windows Network (active directory) from the ubuntu server. eth0 is reporting a valid internal IP on the network, so its been picked up okay.
Edit: I also want to assign a static internal IP address instead of grabbing from the DHCP. Edit2: Thinking about it, as the ubuntu server and windows server can ping each other do I even need to log into the domain? The server will only be serving web pages.
View 3 Replies
View Related
Dec 23, 2010
I have Ubuntu 10.10 and i installed the lamp-server by typing:
Code:
sudo apt-get install lamp-server^
everything seemed to work fine.
[code]....
View 9 Replies
View Related
May 7, 2011
Main purpose of this LAMP server is testing development. I would like to get this server setup up almost exactly to a T how my real web hosting server is setup. I am running 11.04 and have installed LAMP. I also installed vsftpd. I went ahead and made a symlink from /home/user/public_html to /var/www/. I login from a Windows 7 computer via CuteFTP to my Ubuntu server. I can enter the public_html directory and can create folders but the default permissions for any folder created is 700. I have tried running chmod -R 755 /home/user/public_html but this does not work. Every file or folder created now currently will take a 700 permission.
How do I make it so anything that is uploaded into this folder will be at either 755 or 775? Also what is the best practice for utilizing the /var/www directory? Should I be using a symlink to link it to my user's home folder? I have read through so many posts with regards to adding users to a group and giving this group permission and this or that I'm so confused.
View 2 Replies
View Related
May 25, 2011
I am looking to create a multi-user LAMP server. For example the domain name behind my curent server is [URL] I would like user1 to have [URL] and user2 [URL]
View 9 Replies
View Related
Sep 2, 2011
I want to use yum to install LAMP with ssl. Is there a certain order I have to do that in? If I understand this right, yum gets its rpms from one repository. In order to maintain the rpms I will need to know the installation layout of each rpm. How will I find this information?
Also, can I tell yum to go to a certain place and get that rpm? For instance, I've been reading linux topia. Can I tell yum to get that mysql rpm?
Once mysql is installed, how do I start it and get into the client/monitor?
View 3 Replies
View Related
Jul 15, 2010
Is there an easy way to transfer Webserver data from one ubuntu install to a new one? I know I'll need to get the stuff in /var/www and (somehow) the Mysql data, but are there files elsewhere to get? Or is there a better way than trying to copy all the various files?
View 2 Replies
View Related
Apr 14, 2011
Do I need to do anything special to my LAMP server for AJAX to work?
View 2 Replies
View Related
Jan 9, 2010
I have access to a unmanaged dedicated server on the net. I am considering loading Ubuntu Server to this for web/mail/ftp serving. If I install Ubuntu Desktop to my local machine is it possible for me to administer the server using Ubuntu Desktop (using the GUI)? I connect to the net over ADSL. Any guides/advice for setting up Ubuntu as a web/mail/ftp with a key focus on keeping to secure? I know how to install LAMP but as I have root I need to learn a little more than I did when I was on a shared host.
View 1 Replies
View Related
Aug 18, 2011
In my Fedora 14 I want to setup "PHP,MYSQL,APACHE+PhpMyAdmin" for my Web Server.
View 3 Replies
View Related
Jun 2, 2010
A week or so ago I ran an aptitude safe-upgrade and while it was updating mysql I suffered a power-failure. Now, this never really happens in Holland but of course this once it happened at the worst possible time.
I've tried a lot of different things to get mysql working again, but am running into all kinds of problems. First mysql won't shut off properly (it does startup with the computer but I can't connect to it at all) during an aptitude purge. If I kill the process mysql seems to purge properly, but I guess this is not the case because I wasn't able to install it then.
Things seem to have gone a bit more smoothly this time, however:
Code:
snek@snek-server:~$ sudo aptitude install mysql-server
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code].....
View 2 Replies
View Related
Jun 5, 2011
I'm trying to setup local LAMP installation of CentOS 5.6 in VMware for local developing. I installed Apache, PHP, phpMyAdmin from this tutorial. Is there any other begginers step-by-step tutorial for setting up LAMP? I need help setting up FTP and permissions, hot to setup permissions for /var/www/html directory?
View 1 Replies
View Related
Feb 17, 2011
I need to install LAMP server in Debian 6. But like Ubuntu there is no option to install Lamp Server
View 7 Replies
View Related
Sep 16, 2010
Is it possible to download MySQL, Apache and PHP first? And install them on Ubuntu system offline. Is anybody know how can I get them and install them?
I have to install LAMP server on many system for the purpose of training. So I don't want to download them repeatably. Once download them, install on all system.
View 1 Replies
View Related
Dec 23, 2010
Someone asks to install LAMP to the Redhat server , I know LAMP = Linux + Apache + Mysql + PHP , I also can't find any module called LAMP , does it means what I need to install is Apache , mysql , php to my server ?
View 7 Replies
View Related
Mar 16, 2010
I have a file server with ubuntu 9.10 on it already working. I want to add print server capability to it. This would be with a Lexmark z705.
View 1 Replies
View Related
Jun 13, 2011
I recently installed Ubuntu 10.04.2 Server on a small desktop to use as a print server. During installation I marked the sSH, Print, and Samba services.I can ssh into it just fine and that's how I'm configuring it. I have a hp Deskjet F2210 connected to it.My end goal is to be able to use the scanner from my *buntu desktop and from a desktop running XP. All of these being connected via ethernet router.
View 9 Replies
View Related
Jul 15, 2010
I need to uninstall Lamp from my Ubuntu 10.04 OS. I just need to commands etc as I am rather noob at Ubuntu. I will be installing it again I just have come across several problems.
View 2 Replies
View Related
Dec 22, 2010
I've looked at several tutorials and since i'm a newb I can't figure them out. I'm trying to set my hostname on my LAMP 10.04. What files do I need to configure? (all IP's below are fake)
Here are the first lines from /etc/apache2/sites-available/default
Code:
<VirtualHost 111.111.111.111:80>
ServerAdmin webmaster@localhost
/etc/apache2/ports.conf has these lines after the comments
[Code]....
View 4 Replies
View Related
May 24, 2011
I'm using ubuntu server 11.04 in a LAMP configuration. I have my login page setup but my php email verification isnt working. I would like to know how can I install a relay that can take the email verifications and send them through a gmail account.
View 2 Replies
View Related
Apr 22, 2010
a newbe one, but its if my fifth try in using ubuntu for working with Architecture, so... my problem is...I have a plotter (xerox 2230ij) connected in a print server, i tryed to connect in lpt1 port and was sucessful with HP 750 plus driver... so.. yay! but my original intend is to connect in print server and all the computers (windows/ubuntu) use that.But when i connect in PS, i cant see the plotter, but i can acess the PS (Dlink)so.. what i have to do, to make thing working well? and i have virtualbox with windows XP, can XP acess that plotter as well?here a small scheme of my connections...
Code:
router -----------------------------------
| |
[code]...
View 1 Replies
View Related
Jan 13, 2010
I have a LAMP server running Ubuntu 8.04.03 Server edition running smoothly. Ive setup several websites on the server and all are ok, but I constantly have trouble with permissions. Everytime I setup a new domain to host, I setup a user specific to that domain. This allows SSH login specific to the domain. The problem I have is that every time I setup ownership in the virtual directories for the users they belong to, the settings don't seem to stay. Initially it seems to work ok, but when I install Joomla and setup the webspace, I always seem to have to login to the server itself to chmod the folders I need to have writable. I cant chmod properly from my FTP client which is weird. How to manage permissions?
Currently I am doing the following:
Code:
sudo mkdir -p {name of domain}/{public,private, etc...}
sudo usermod -g www-data {my user name}
sudo chown -R www-data:www-data /var/www/{directory for the domain}
sudo chmod -R 775 {folder path I need to change}
This works for a while but as I add new things to Joomla and I want to modify the folders, I always have to go back and redo the chmod and the chown commands to get them where I want.
View 4 Replies
View Related
May 4, 2010
End of my first week after using ubuntu. I have setup LAMP for the purposes of my own coding education, place to run php and python scripts.
LAMP seems to be setup fine and working - I even got php5 working with it - however I am having a lot more trouble getting python to work in much the same manner.
I have downloaded the mod_python from [URL], unzipped it, tried to run ./configure and it said apxs was not installed.
After some reading it turns out I had to remove some apache-fork something and install apache-devfork (please forgive lack of exact names).
After doing this the ./configure on mod_python passed the "finding apxs" test but then said it can't find apache2 at /sbin/apache2 and again aborted the configure.
running 10.4 (lucid)
View 1 Replies
View Related
Jul 23, 2010
PHP in *.php files works in LAMP. PHP script within an *.html file is not executed. Does not display anything but view->source_code shows the <?php ... ?>
[Code]...
Doesn't display anything except the page title is there. View page source --- shows <?php phpinfo() ?> not the phpinfo() output. Both files are in /var/www/ with 644 permissions.
[Code]...
View 9 Replies
View Related
