Server :: 4 Websites On Different IP - How To Host Them Using Apache2 Mod_proxy ?
Apr 12, 2010
Dom0 is having public IP. I read a lot of blog and tutorials about name based and IP based hostings and also about mod_proxy. But I am unable to do.
Here is what I am trying to do. I have a webserver on public IP.Which is running Xen on it. There are 4 Guest Operating systems installed on top of Dom0 which are Dom1,Dom2,Dom3,Dom4 These are application servers which are going to serve the requests that come from the main server.Which is Dom0.
All I see is "It works" on all 4 of the hosts. On my LAN on any machine on same subnet if I do [url] of Domu1 message comes
Code:
in browser from LAN gives me a message
Code: It works.
What do I need to do on Dom0 so that requests are forwarded to the appropriate DomUs apache2 is running on all of them including Dom0.Some one suggested me to go for ReverseProxy in Apache2.
View 3 Replies
ADVERTISEMENT
Jun 25, 2011
any1 know how to config apache so i can use ServerName at my web browser ?
here is what i am trying to do: i need to host a number of web sites at my mac, for example: hostone.com, hosttwo.com, hostthree.com and etc since i need to host more than one website at the same pc, i use name based virtual hosts so i have hostone at 192.168.0.1:1234 and a servername of "hostone" hosttwo at 192.168.0.1:1235 with a server name of "hosttwo" and etc
my question is , how do i config my local settings, so all of my local network computers can access "hostone" site by type "hostone" at their browser and "hosttwo" site by type "hosttwo" at their browser
View 3 Replies
View Related
May 14, 2010
I seem to be having a problem with mod_proxy and https websites. A simple connection to port 80 works fine but all calls to 443 fail.
I had a look at my firewall but can't see anything that would block port 443, although I get no tcpdump traffic on that port on the deb01 client when I try and connect to it. I disabled the firewall but still no luck.
My configuration consists of 3 VMs (KVM) each running a different website.
I get the following error when connecting to ssl deb01
Code: An error occurred during a connection to deb03.example.com.
SSL received a record that exceeded the maximum permissible length.
(Error code: ssl_error_rx_record_too_long)
The following is what can be found on the host
Code:
View 1 Replies
View Related
Mar 9, 2010
i'm using apache2 prefork as proxy (mod_proxy) and i'm facing some performance problems such freezes , for instance the entire server blocks and becomes totally unresponsive after several requests.
at first i thought that the system is running out of memory so i tweaked the mpm config and reduced the number of allowed processes that can start concurrently , however the problem still persists..would mpm worker serve better than prefork ?
View 1 Replies
View Related
Dec 24, 2010
I have a server acting as a proxy to a couple of IP cameras on my local network. The IP cameras require HTTP-Authentication (Basic) but I want the outward facing Apache server to automatically log in without prompting the user for a login.
My current configuration is:
Code:
That works as a proxy but still asks for a HTTP Auth login. Can I get Apache to pass the login details to the IP cameras so users can just hit up the proxy and view the camera without having to log in?
View 2 Replies
View Related
Oct 30, 2009
Bit of an odd one, this. I've migrated a website from my old server to a new machine. Both servers run Ubuntu + Apache2. Both only serve a single site, apart from the default site.I've flipped the domain name to the new IP address.The trouble is that after moving the virtual host config over into sites-available, with the necessary link in sites-enabled, Apache attempts to serve from the default web root (/var/www) rather than the actual site content (in /var/www/technology). So for example, an attempt to browse.
View 1 Replies
View Related
Mar 20, 2010
I have a php app set up in the default virtualhost, and want to add a Grails app. The grails app runs on [URL] and I want to configure apache2 to proxy that folder to Jetty using mod_proxy.
Module is enabled
Code:
$ sudo a2enmod proxy
Module proxy already enabled
[code]....
Quote:
[Sun Mar 21 00:14:56 2010] [warn] proxy: No protocol handler was valid for the URL /mailscan. If you are using a DSO version of mod_proxy, make sure the proxy submodules are included in the configuration using LoadModule. My apache2.conf contains no LoadModule lines, and a2enmod says it's already enabled. Does Ubuntu Desktop (Karmic) use the DSO versions of modules, or did I miss something else? I'm aware I should also use mod_proxy_html to make sure only the "portless" version of the address is outputted, but I can fix that later!
View 1 Replies
View Related
Dec 15, 2010
I am trying add three namebased virtual hosts in local apache2 webserver OS ubuntu 10.10. The three sites are :www.site1.eka,www.site2.eka,www.site2.eka
The first I created a file is virtual.conf in conf.d directory its content is :
# we're running multiple virtual hosts.
# NameVirtualHost *:80
Next I created following files in sites-available directory. [URL] is as follows:
#site1.eka (/etc/apache2/sites-available/www.site1.eka)
<VirtualHost *:80>
ServerAdmin webmaster@site1.eka
ServerName www.site1.eka
ServerAlias site1.eka .....
When I visit the [URL] in browser it says server not found.
View 3 Replies
View Related
Nov 19, 2010
I have suse10 64 bit installed. I am setting up a svn server on it. After installation and adding the modules ,while reloading the apache2 it's throwing the error as: HTML Code: httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
View 9 Replies
View Related
Dec 9, 2009
I am getting this error
Starting web server: apache2[Wed Dec 09 15:36:40 2009] [warn] NameVirtualHost XX.XX.XX.XXX:80 has no VirtualHosts(99)Cannot assign requested address: make_sock: could not bind to address 68.178.232.100:80
no listening sockets available, shutting down Unable to open logs failed!
also what is 68.178.232.100
View 1 Replies
View Related
Nov 3, 2010
I have figured out how to use virtualhost, proxypass and proxypassreverse. So far, so good.
The problem I'm experiencing is this:
I have a reverse proxy server running apache (123.123.123.123)
Behind this proxy server I have a http server running apache (124.124.124.124).
This http server has multiple sites (virtualhost), it's only reachable via the proxy server.
If i run a nslookup on www.somedomain.com I get 123.123.123.123 (Not really but you understand what I mean)
I put my proxy to have the IP 123.123.123.123, so far so good. The requests come in to the proxy server.
I want my http server to be named 124.124.124.124.
In the http server I wish to set up my virtualhosts like this:
How do I get my proxy to grab the data from the http server?
If I do like this I will only make another request to my proxy server.
If I do like this, only the first page in the httpd.conf in my http server will work.
Do I need to setup a different DNS server for the proxy server? I would hate that. Perhaps use hosts-file in proxy. Or maybe I can use sub-domains?
View 1 Replies
View Related
Nov 12, 2010
I am moving some websites from a shared host to a newly configured Xen based VPS with Ubuntu 10.04. A steep learning curve but I am getting there! I have a couple of sites installed on the new server and want to test them out, from what I understand I should be able to edit /etc/hosts on my desktop computer (running Ubuntu 10.04) which should automatically redirect my browser to the new server. But it doesn't seem to work.
This is what I appended to the /etc/hosts file:
12.34.56.78 www.xxxx.com
I thought that this should send any requests for www.xxxx.com to 12.34.56.78? Some googling indicated that the browsers I am using may be using DNS caching, ignoring the hosts file. I've tried clearing the cache with Chromium 7.0.517.44 (64615) and Firefox 3.6.12, and even installed a plugin in Firefox to block DNS caching.
View 9 Replies
View Related
Mar 31, 2011
I'm using CentOS 5 and just found out that there are people using my Apache Web Server as proxy (version 2.2.3 the OS's default).
I've checked out that my mod_proxy is already disabled but the unauthorized incoming request is still very large.
So I tried to compile an Apache from raw (2.2.17) just enabling mod_rewrite and then found out that the 'proxy' request is still there.
Tried httpd -l and here are the modules inside the Apache :
Code:
# /opt/apachew/bin/httpd -l
Compiled in modules:
core.c
mod_authn_file.c
[Code]....
There should be no mod_proxy but why should it still accepting proxy request? I checked the access_log file and still found [URL] and so on.
My question is : - How to block all the proxy request and only accepting the normal web server request? I also have tried to enable proxy in the previous Apache and then setting up "ProxyRequest Off" and Proxy * only from localhost but the request is still there.
I tried by myself using the webserver as proxy in browser and all the URLs I opened including the false URL will be redirected to my index.php and this should show me that 'you-can't-use-this-as-proxy-anymore' right?
Insane people still believe they could use my server and they keep trying and trying.
I couldn't block the IP addresses because some of them are using the mobile data (GPRS/UMTS) and that is our market for the website.
View 5 Replies
View Related
Jun 1, 2010
I have this intra net server project going on and now I moved to 10.04 however there are still some things that I would like to see clarification and instructions on. I am interested to set up multiple parallel websites for my apache server, however I am not sure how to do this exactly. Now I have solid address rivera.wippies.net and port 80 redirecting to my server. What I would like to get done is that I get multiple independent of each other websites for my server I was thinking of making websites like this
/var/www/site1 (which would be as rivera.wippies.net)
/var/www/site2 (which would be as rivera.wippies.net/othersite)
/var/www/site3 (which would be rivera.wippies.net/secondothersite)
etc, so that I have multiple "individual" websties for my server. Requirements would be that each of these websites could have SSL encryption as needed available too, since some of the website could have confidential information.
View 9 Replies
View Related
Apr 16, 2010
I currently have a virtual host setup to accept SSL connections as follows:
Code:
<VirtualHost *:443>
DocumentRoot "/var/www"
SSLEngine on
SSLCertificateFile /etc/apache2/ssl/apache.pem
[Code].....
How would I change it so that it can only be accessed via HTTPS ??
View 4 Replies
View Related
Jan 24, 2011
I've just installed LAMP. http://localhost/ page works fine. I need to create some virtual hosts. Localhost page is situated in /var/www/. It's normal for me, and I wanted to created virtualhost (in /var/www/vhost1) But it doesn't open in browser. Where is my mistake?
/etc/apache2/ports.conf
Code:
NameVirtualHost *:80
Listen 80
<IfModule mod_ssl.c>
# If you add NameVirtualHost *:443 here, you will also have to change
# the VirtualHost statement in /etc/apache2/sites-available/default-ssl
[Code]...
View 7 Replies
View Related
May 5, 2011
I want make several virtual Host using apache2. Each virtual host will have virtual domains in localhost with different root.
View 4 Replies
View Related
May 29, 2011
It is possible for apache2 (debian) to host a frontpage page? All links I found from google and microsoft said that frontpage is dead. How can I host the site ?
View 4 Replies
View Related
Jun 4, 2010
My goal is a testing server with an apache virtual host for each site that I'm working on, with fairly painless setup for each new job.For example, I want http://site-a.mydomain to server this document root /home/client-a/site-a/public_html (or something to that effect)Ideally, DNS will use a wildcard to point http://anything-i-type.mydomain to the testing server, and apache will have a dynamic virtual host definition that will do a little magic so that I won't have to mess with DNS records or add a new virtual host each time I add a new site for a client. I'll worry about that when I get there, just put that out there in case anyone has any tips! for now I just have one little problem that's hurting my mood-
It looks like I've got my DNS server working just fine, so yay there- BUT my first attempt at adding a virtual host isn't working quite how I expected- meaning that site-a.mydomain now serves up the correct document root, but when you put http://site-a.mydomain into the browser's address bar, the address bar is then updated to http://10.0.1.100/site-a/public_html - bogus!! I must be missing an option like "FunnyBusiness Off" -
root@ubuntuvm:/etc/apache2/sites-available# vim client-a.mydomain
<VirtualHost *:80>
UseCanonicalName Off
ServerName site-a.mydomain
DocumentRoot /home/client-a/site-a/public_html
</VirtualHost>2
View 2 Replies
View Related
Apr 29, 2010
I have just been told that httpd was not running on my Centos virtual server. It seems that my hosting company rebooted my server 2 days ago and that httpd restart failed due to:
Starting httpd: httpd:
Syntax error on line 213 of /etc/httpd/conf/httpd.conf:
Syntax error on line 2 of /etc/httpd/conf.d/proxy_ajp.conf:
Cannot load /etc/httpd/modules/mod_proxy_ajp.so into server: /etc/httpd/modules/mod_proxy_ajp.so: undefined symbol: proxy_module
I had worked around and forgotten about this some time ago. The problem arose because the most recent httpd update installed proxy_ajp.conf into /etc/httpd/conf.d which was then loaded on restart The trouble is I do not use mod_proxy (I think just to try and get a lean and mean web server) and proxy_ajp.conf does not check if mod_proxy is loaded before it tries to LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
Hence httpd fails to restart. RedHats's bug tracker lists this as an old issue (which was never resolved) [URL] My workaround was to rename proxy_ajp.conf to proxy_ajp.conf.orig so that httpd would start up correctly. However any updates simply reinstall proxy_ajp.conf and so IMO the problem needs to be resolved at source. how to ensure that httpd updates do not bite me in the future? Do I really have to run mod_proxy whether or not I need it?
View 6 Replies
View Related
Sep 8, 2009
Many of mails sent from my mail server that are in Queue;The main reason is deffered by domains like yahoo,aol,etc.but there is one more error that i keep getting and that is Host Unknown,Below is an example from mail log,The catch is,test mail sent on the same email id sent from my personal mail from the same server i.e. url was deliveredHowever,another mail containing client information sent from customercare@mycompanysdomain ended up in queue.
There are more examples of the same,around 20 domain have the same problem.
Sep 7 14:33:46 server2 sendmail[24591]: n8793jiC024589: to=<abc@xyz.fi>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=163672, relay=xyz.fi., dsn=5.1.2, stat=Host unknown (Name server: xyz.fi.: host not found)
Sep 7 22:09:42 server2 sendmail[6407]: n87Gdffa006403: to=<abc@def-fgh.com>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=152474, relay=def-fgh.com., dsn=5.1.2, stat=Host unknown (Name server: def-fgh.com.: host not found)
View 2 Replies
View Related
Nov 18, 2010
I am having no luck configuring ProFTPd on a Debian Lenny production server we use to host our MySQL databases and a few websites. I had originally set it up so I could login and manage our internal sites, but I have the need to allow a few clients in to access their sites that we host. I am trying to root the users in their site directory, which would be "/sites/www.whatever.com/".
It just hit me while typing this. Is it possible to create a user without a shell to prevent login via SSH and set the home folder to /sites/whatever instead of /home/username? That would allow me to continue operating with my current configuration and root them in their site while preventing SSH logins.
View 6 Replies
View Related
Apr 12, 2010
I want to block all websites except desired websites.
View 3 Replies
View Related
Feb 21, 2010
I'll preface this by saying i'm by no means an expert on Linux. A competant beginner at most.We have a dedicated server, the 'resolv.conf' was changed, specifically the domain that was listed (this is the primary domain).I only became aware of this change, when we get into work on Friday and all our sites were down - I attributed this to DNS fault as if I changed my host file (I work on a windows machine) and specifically routed to the domains to the correct IP address, the websites were served fine.I tracked down the resolv.conf change by quizzing a collegue. I then switched the resolv.conf file back to it's original state - luckily a backup was made so I am 100% sure that the current resolv.conf is the correct one.
change was made Friday morning, around 9.30am (UK time). It is now 5.05pm (UK time). The original change was made sometime on Weds afternoon, and the sites stopped serving between Thursday night and Friday morning.Does anyone have any idea how long it should take for the fix to be picked up? Will it be picked up? I just started to think that the change can't be picked up due to some DNS related voodoo.
View 4 Replies
View Related
Oct 24, 2010
Using Debian Lenny I'm getting the following message in my mail: /etc/cron.daily/logrotate:
Quote:
apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
View 1 Replies
View Related
Aug 1, 2011
I currently have a single mysql instance for a couple of websites. Both websites require that the user provide a username.
The thing I just noticed is that two people might choose the same username for both applications. Both of them would have grants to each others' tables, although neither would ever be able to access them, since they can only access through php scripts.
But, I'm now guessing this is not best practice. What does one do? Run multiple instances of mysql for several websites?
View 4 Replies
View Related
Dec 26, 2010
I have a lenovo x200 laptop running Fedora 14, fully up to date with the Fedora repository. Seemingly out of nowhere, some websites will no longer load. First it happened to www.facebook.com, next (after a day or so) wikipedia.org, now the Fedora forum. Other Internet access seems fine, but when I try to go to these pages I just get "unable to find host" errors. Its totally bizarre. It first happened in an airport so I thought it was just a strange network there, but now it happens at home. I can't get on these sites in firefox or elinks browsers (in a terminal) BUT I can ping both sites no problem. Also, the other computers in this house have no problem visiting these sites.
View 2 Replies
View Related
Jun 7, 2009
I have installed Bind DNS server in Opensuse 11.1 and it was running fine for two weeks. However starting last week it was unable to resolve a lot of internet sites (e.g. opensuse.org). I can say it is working partiallyI tried restart the named service and it worked fine for only about 15 minutes and back to partial condition.All the records in zone files can be resolved. Only some internet websites not able to resolve. The same sites can be resolve with another dns server internally
View 2 Replies
View Related
Dec 13, 2010
So I'm looking to host potentialy three different...sites...I want to call them from the same machine. One is a radio station and the other 2 are just straight websites. So I wanted to know if I had to use different machines to accomplish this or can I alter maybe the http conf file or what. I did find this in the forums but wasn't quite sure if this applied to me. [URL="http://www.linuxquestions.org/questions/linux-software-2/serving-multiple-domain-websites-on-one-server-329914/"http://www.linuxquestions.org/questions/linux-software-2/serving-multiple-domain-websites-on-one-server-329914/[/URL]
View 1 Replies
View Related
Nov 17, 2010
I have a CentOS Server and i use ispconfig 3. I have hosted 10 websites and the other day all my websites went down. I have tried to look at the logs i cant see any thing ISPconfig logs dont have any errors.
View 5 Replies
View Related
