I am hosting some websites and i want to monitor who is using more resources from a thoughput standpoint... Would this be bandwidth monitoring. can use to monitor these sites. I am using an uptodate version of apache2 and a single ip vhost setup.
View 9 RepliesI posted this in the Networking section, but should probably be over here. Couldn't move it. I have a transparent proxy in place. I have Webmin installed on the server. Is there an app that can monitor bandwidth in real time? Also run reports? I have SARG installed, but seems to only monitor HTTP traffic, I need to monitor all traffic. I have a bridged connection, but monitoring the outside interface is fine too.
View 5 Replies View RelatedI'm installing a server to act as a firewall between a local network and internet. I've installed Firestarter becaused it worked straitgh away (it seems that FS is configuring the routing as well). I've tried to remove it, and then I lost the access from LAN to Internet. (I don't know why -perhaps the routing is disabled then- , so I prefer to keep it).
The problem is that Webmin Bandwidth Monitor (bandwidthd) is not logging anything when FS is active. Does someone has an idea on how I could make it work? I've tried cacti and some other stuff, but it is far too complicated for me.
I live in the boonies, so I have satellite internet. It's not too bad, but I'm restricted to 200 mb's of download per day.
I'm looking for an app that will keep track of my usage, so I don't go over 200. I was using "System Monitor", but it's a little buggy, so I'd like to try something else.
when the server is getting overloaded with users. At present I run the server mainly as a proxy server with about 100 users. The bandwidth at the data centre is 100Mbps connection with total bandwidth used last month = 17431.16 MB
I would like to add a VPN in future but feel that this might overload the bandwidth as instead of it just being web traffic it will the entire client TCP connections. I would like to monitor this before it gets to the stage where users are complaining but not sure how to gauge whether the proxy is being overloaded. It is used mainly for video traffic.
I'm looking for a simple way to monitor and log my internet bandwidth usage. Not total network device usage, just internet usage.Something that provides a simple chart of daily, monthly, and yearly usage, but ignoring all bandwidth on my internal LAN.I notice several possible tools, such as vnstat, ntop, iftop. Yet all of them seem focused on tracking the entire network interface. I want to ignore LAN usage. I do not really care about LAN bandwidth.iftop seems intended only for on-the-fly usage and not cumulative logging. I can't tell whether vnstat or ntop can be configured to log only internet usage rather than all traffic through the network device.
I do not want to log every connection like squid. The utility should only log stats on a daily basis, but also be able to display cumulative totals from those daily entries.I don't need DNS resolution, port monitoring, etc.I prefer something that runs in the background as a service or daemon, but can provide statistics quickly with a terminal window. All I want is to view total daily, monthly, and yearly internet usage. Perhaps even pipe the output to a local email each day too.
I'd like to find some sort of program which can tell me how much incoming data I've had in the last 24 hours. It goes by hours, not by days, but anything that's simple and that can display this will do. Is there any sort of program that does this? Something that would fit well with Ubuntu's style wouldn't hurt, but I'm not that worried about it as long as it does the job.
View 1 Replies View RelatedI come from a windows world where there's a magical tool called netlimiter that allows me to shape bandwidth and watch upload and download traffic: And easily check stats: I wonder if there's such a beauty for linux?
View 1 Replies View Relatedis there any way to monitor each application network bandwidth usage ?I've used gnome-system-monitor, but unfortunately it just show the total network activity
View 3 Replies View RelatedI'm on Comcast (insert vomit sound here) and they have a 250GB monthly limit. I don't think I'm remotely close to this on a normal month and want to figure out if I could perhaps squeak by with the 5GB limit imposed by Verizon's 3G wireless broadband.
I'm ideally looking for a quick easy-to-use GUI application, rather than something that's done via the command line.
I thought perhaps I could look in my Account and find a nice "You've used X percent of 250 GB thus far" window. Then I called, but Comcast couldn't tell me. They just borked me off to some Windoze application 3rd party which I'm supposed to install.
I run Skype and occasionally download Fedora iso images and so on. Rarely am I doing more than surfing the web, chatting, and sending emails. I doubt I'm even close to 250GBs but I'm guessing that 5GB will end up being problematic.
Are there any programs that will keep track of how much bandwidth I'm using? It'd be great to have an application that runs there in the taskbar and just shows a graph of how much I've used thus far.
I want a bandwidth monitor which performs constant monitoring of the ethernet. I want to see how much bandwidth I am spending by opening each website, downloading, etc. A small program which can remain "always on top".
I am using Gkrellm but the problem is it does not updates itself constantly, I mean I have to close/open its eth0 monitoring window to view changes (I am not talking about restarting Gkrellm, only the bandwidth window which shows the daily, monthly bandwidths)
my isp is putting a max bandwidth in my area and I need to monitor my downloads and uploads per month. Is there anything that has a gui that is easy to set up and just shows the amount of data downloaded and uploaded per month. Also if possible to do a pop up if you set a maximum bandwidth amount.
View 2 Replies View RelatedIs there any tool in linux, so that the bandwidth, each user consuming, can be monitored.
View 2 Replies View RelatedIs there anyway to monitor the current bandwidth in use by a user (NCSA auth) on squid? Occasionally we get a user downloading too many videos at once, which blocks bandwidth to other users on the network. As I have no idea which user it is until the end of the day (SARG reports), we just restart the squid server to disconnect their downloads.
View 6 Replies View RelatedI'm looking for an effective way to manage use of internet bandwidth by users on a local area network. Currently there is a simple broadband router and unmanaged switch, and a standalone Ubuntu Server (8.04) that provides DHCP, DNS and mail for the LAN, and a web server. Ports are forwarded from a static external IP address to HTTP, HTTPS, SMTP, SSH and IMAPS, and some security is provided by IP Tables (managed by using UFW).
There are 5 users on the network, and currently one or two of those 5 are using beyond our monthly download allowance of 30Gb. 1) To be aware of how many users are currently using the internet connection, and to divide the bandwidth between that number (so that if there are, say, 3 active connections, the total bandwidth available is divided 3 ways, rather than one of those users being able to hog all of it).
2) To allow each user to download up to 1/5 of 30Gb each month without any additional throttling (apart from the above), but once they go over that allowance to throttle them individually to, say, 10Kbps until the start of the new month.
I've heard other threads talking about both IP Tables and a proxy server such as Squid. I have no idea which of these would be most suited to the task. Currently, as I said, the Ubuntu server is standalone and only using 1 NIC, but it has 2 NICs and I could be configured to act as a gateway for the LAN, instead of the router, which is set to be the current default gateway.
I switched on bandwidth monitoring on my Ubuntu Server via Webmin on interface eth1. Unfortunately this has filled my disk by writing huge syslog, debug and kernel.log files. How do I switch it off? I can't see a way of doing it in Webmin.
View 1 Replies View RelatedI am running Ubuntu server 9.10 and I am trying to find a way to cumulate and visualized bandwidth for all the ips on my network.
I created a server connected to a mirror port of my router and I am running snort and nessus and ntop to monitor and scan my network for security. Everything is running fine and I can see all the traffic happening, ntop creates really nice report of what is going on in the network, snort with base alert me of probable security problem and nessus help me secure the network with weekly scans.
What else do I need ? I really simply need a software that will calculate the total bandwith usage per ip address. Ntop seems to gather all that information somewhere, but there is not simple way to get the information out of it. I was thinking maybe cacti would be the software to use but I am not too familiar with Cacti and it's interface seems a bit daunting still.
I don't need it to be web interface - but it would be nice. I could probably rig up something on a console base program. What I want the output to be should look like tcptrack but with the running totals for last day, last month, last year, and if there could be a graph for it- even better.
Is it possible to share bandwidth over Internet? A friend of me has made a little radio station with win-amp to screw around with. But as you can guess after 10 users the connection flips due to bandwidth limits. So we where wondering if we somehow can share both our bandwidth. I was thinking about perhaps linking some proxy's and combine that with load balancing... Something like that! But i'm not even sure if it's possible to do so.
View 3 Replies View RelatedHere is a mail in /var/mail/root which I received in my server logs[URL]I see same packages downloaded many times again and again.The servers which are upgrading are total 5 (4 virtual machines and one hostso is there a way I can save bandwidth on this sort of setup.
View 3 Replies View RelatedI used the Ubuntu server 10.10 for cache and proxy purpose. I install squid 2.7 stable 9. My problem is to cache the some url by force. eg . [URL]...I search the clues by using google. but I only found how to block the url. so I come here and request the advice. I want to cache the couple of site because of our country have bandwidth problem.
View 2 Replies View RelatedI created a the class like this for shaping the packets with a specified bandwidth rate.....
tc qdisc del dev eth0 root
tc qdisc add dev eth0 root handle 1: htb default 15
tc class add dev eth0 parent 1:0 classid 1:1 htb rate 750kbit ceil 750kbit
tc class add dev eth0 parent 1:1 classid 1:3 htb rate 600kbit ceil 750kbit prio 0
For Our Requirement:-
I dont want to specify the bandwidth rate strictly like this rate750kbit ceil 750kbit,based on whatever speed is coming which should allocate the bandwidth rate for particular class...I need one application for finding the upcoming bandwidth & Is any other method is there for specify the bandwidth rate in a classes.
Recently our houses internet usage has skyrocketed and i'm trying to keep an eye on it using bandwidthd (installed on the server). It installed fine and counts traffic fine, the problem is we have a server that hosts our music/movies/etc and when people pull music off the server it skews their bandwidth usage. I'm looking for a way to exclude all traffic on the local network and only count internet traffic. This is the filtering part of the config file
[Code]...
I have a fedora 9 server. It is used purely as a dedicated server. Until recently I never came close to my allowed bandwidth of 1 TB but I expect that may change in the near future because I will be adding many files for downloading. I have Apache 2.2.9, PHP 5.2.6, mySQL 5.0.51 and Webmin 1.441.
The most critical thing is monitoring total bandwidth and then doing a job, probably using Cron to change a folder's name, to stop downloads before a critical point is reached and my sites shut down. I would also probably eventually like to limit member downloads so all members of the sites get a chance to download and one person doesn't use all the bandwidth. I expect that would be possible using php. to log the bandwidth used by members. I know php but I don't know how to get the bandwidth using php.
I am running ubuntu server in a virtual environment (vmware) and have setup apache and got mediawiki up and running which I can access on host machine by going to 172.16.170.130. But this is only available on my host machine and not elsewhere on the network. How do I make it available to others on LAN and eventually on the internet (associated with my host IP address?)
View 3 Replies View RelatedI'm trying to run ssh commands though PHP on my website. I found this tutorial for it: [URL] I've got a few problems here, when I do "apt-get install openssl-dev" I get this output:
Code:
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package openssl-dev
[Code].....
My ISP provided me with a static IP and I went and bought a domain name with godaddy.com. The issue I'm having now is that I am getting a 403 forbidden error (You don't have permission to access / on this server). The strange part is that when I ssh into my server, and try to go to my website, everything works fine
View 5 Replies View RelatedI was with hostgator before that provided cPanel and i "believe" they used CentOS.Now that i have moved to a different host, unmanaged, i installed copy of ubuntu 10.04 LTS 32 bit.the website is www.terwax.com.I have to put files under /var/www. So i put all the files there, including index.html (a file of joomla), but if you see the website yourself, it shows up blank page with some weird stuf
View 9 Replies View RelatedI'd like to install an IRC server on my website (it's hosted on another server location).I can log into the server side of things but am not sure how much control I have of installing applications. I'd like an IRC that's easy to install and easy to set-up. I logged into the cPanel page of the site and found this "general server information":
Operating system: Linux
Kernel version: 2.6.9-78.0.22.EL
Machine type: i686
Apache version: 1.3.41 (Unix)
[code]....
Unfortunately there's not an IRCd/server type of application available on the "Fantistico Deluxe" application installer feature.
I am using apache web server for my website. I have the main page up and I want to create another page. For example, I want to have "thisiswhatiwant" being the page I want to add
View 1 Replies View RelatedSo I gave up on the mail server Idea as that was too much of a headache.
So I was wondering as I have registered waloshin.com with godaddy.com how can I get an apache hosted website to appear on that domain from my server?
Do I have to configure BIND9 to do so?
While going to http://whatismyipaddress.com/ it does say that my ip address is static: Assignment:Static IP