Ubuntu Servers :: Firestarter And Webmin Bandwidth Monitor Not Logging Anything When FS Is Active
Jan 7, 2010
I'm installing a server to act as a firewall between a local network and internet. I've installed Firestarter becaused it worked straitgh away (it seems that FS is configuring the routing as well). I've tried to remove it, and then I lost the access from LAN to Internet. (I don't know why -perhaps the routing is disabled then- , so I prefer to keep it).
The problem is that Webmin Bandwidth Monitor (bandwidthd) is not logging anything when FS is active. Does someone has an idea on how I could make it work? I've tried cacti and some other stuff, but it is far too complicated for me.
View 2 Replies
ADVERTISEMENT
Mar 27, 2010
I am hosting some websites and i want to monitor who is using more resources from a thoughput standpoint... Would this be bandwidth monitoring. can use to monitor these sites. I am using an uptodate version of apache2 and a single ip vhost setup.
View 9 Replies
View Related
Apr 14, 2011
I posted this in the Networking section, but should probably be over here. Couldn't move it. I have a transparent proxy in place. I have Webmin installed on the server. Is there an app that can monitor bandwidth in real time? Also run reports? I have SARG installed, but seems to only monitor HTTP traffic, I need to monitor all traffic. I have a bridged connection, but monitoring the outside interface is fine too.
View 5 Replies
View Related
Apr 3, 2010
I encountered a a dependency issue when trying to install Webmin on Ubuntu Server Edition 10.04 Beta1.
When you try to install webmin, libmd5-perl is not available in any of the lucid repositories:
I resolved the dependency prob by adding the following repository to my /etc/apt/sources.list: deb [url]
Then I did a sudo apt-get update then sudo apt-get install and libmd5-perl installed fine along with webadmin. BTW. I got a GPG error when doing a apt=get update because I did not import the public key for the debian repos I used to get libdm5-perl, which doesn't matter to me as I commented out the repos once I got libmd5-perl installed.
View 1 Replies
View Related
Feb 26, 2010
I am running Firestarter on Ubuntu 9.10 64 bit. I have noticed several times that after closing all web apps (Firefox, Thunderbird) that some entries remain under the heading "Active connections" on the Firestarter "Status" tab. Often these show no source program. Currently I have 2 showing which show Firefox as the source. These persist after Firefox is shut down. I have verified that no Firfox process is running. And both of the IPs point to google.I have Disconnected eht0 and they still show. I have logged out and back in and they still show. I must reboot the machine to make these entries go away. Which makes me think perhaps this is a bug in Firestarter(?) Is there another way I can identify truly active connections?
View 2 Replies
View Related
Sep 11, 2010
A portscan reveals that port 39878 is 'open', service: 'unknown. I deny service for this port in Firestarter FW 'policy' Firestarter does not show any active connection. I am not running any apps, so how can I close this port?
View 9 Replies
View Related
Mar 11, 2011
how to setup an Active/Active Load Balanced and High Available (If one of the nodes is down the system still runs) MySQL cluster. I have found quite a few howto's but I have some things unclear in my mind. I found a few solutions like this one: [URL] or this: [URK] Those are using two or four MySQL nodes, two Load Balancers to avoid a single point of failure but only one MySQL cluster management server. What happens if the MySQL cluster management fails?
I have also found a "MySQL Master-Master Circular Replication" technique but from what I read, with this option there is a chance that conflicts will arise if node A and node B both insert an auto-incrementing key on the same table.
View 1 Replies
View Related
Jul 28, 2010
I live in the boonies, so I have satellite internet. It's not too bad, but I'm restricted to 200 mb's of download per day.
I'm looking for an app that will keep track of my usage, so I don't go over 200. I was using "System Monitor", but it's a little buggy, so I'd like to try something else.
View 7 Replies
View Related
May 17, 2010
when the server is getting overloaded with users. At present I run the server mainly as a proxy server with about 100 users. The bandwidth at the data centre is 100Mbps connection with total bandwidth used last month = 17431.16 MB
I would like to add a VPN in future but feel that this might overload the bandwidth as instead of it just being web traffic it will the entire client TCP connections. I would like to monitor this before it gets to the stage where users are complaining but not sure how to gauge whether the proxy is being overloaded. It is used mainly for video traffic.
View 1 Replies
View Related
Jan 2, 2010
I'm looking for a simple way to monitor and log my internet bandwidth usage. Not total network device usage, just internet usage.Something that provides a simple chart of daily, monthly, and yearly usage, but ignoring all bandwidth on my internal LAN.I notice several possible tools, such as vnstat, ntop, iftop. Yet all of them seem focused on tracking the entire network interface. I want to ignore LAN usage. I do not really care about LAN bandwidth.iftop seems intended only for on-the-fly usage and not cumulative logging. I can't tell whether vnstat or ntop can be configured to log only internet usage rather than all traffic through the network device.
I do not want to log every connection like squid. The utility should only log stats on a daily basis, but also be able to display cumulative totals from those daily entries.I don't need DNS resolution, port monitoring, etc.I prefer something that runs in the background as a service or daemon, but can provide statistics quickly with a terminal window. All I want is to view total daily, monthly, and yearly internet usage. Perhaps even pipe the output to a local email each day too.
View 14 Replies
View Related
Feb 18, 2010
I'd like to find some sort of program which can tell me how much incoming data I've had in the last 24 hours. It goes by hours, not by days, but anything that's simple and that can display this will do. Is there any sort of program that does this? Something that would fit well with Ubuntu's style wouldn't hurt, but I'm not that worried about it as long as it does the job.
View 1 Replies
View Related
Dec 14, 2010
I come from a windows world where there's a magical tool called netlimiter that allows me to shape bandwidth and watch upload and download traffic: And easily check stats: I wonder if there's such a beauty for linux?
View 1 Replies
View Related
Sep 1, 2011
is there any way to monitor each application network bandwidth usage ?I've used gnome-system-monitor, but unfortunately it just show the total network activity
View 3 Replies
View Related
Aug 18, 2009
I'm on Comcast (insert vomit sound here) and they have a 250GB monthly limit. I don't think I'm remotely close to this on a normal month and want to figure out if I could perhaps squeak by with the 5GB limit imposed by Verizon's 3G wireless broadband.
I'm ideally looking for a quick easy-to-use GUI application, rather than something that's done via the command line.
I thought perhaps I could look in my Account and find a nice "You've used X percent of 250 GB thus far" window. Then I called, but Comcast couldn't tell me. They just borked me off to some Windoze application 3rd party which I'm supposed to install.
I run Skype and occasionally download Fedora iso images and so on. Rarely am I doing more than surfing the web, chatting, and sending emails. I doubt I'm even close to 250GBs but I'm guessing that 5GB will end up being problematic.
Are there any programs that will keep track of how much bandwidth I'm using? It'd be great to have an application that runs there in the taskbar and just shows a graph of how much I've used thus far.
View 2 Replies
View Related
Mar 15, 2010
I want a bandwidth monitor which performs constant monitoring of the ethernet. I want to see how much bandwidth I am spending by opening each website, downloading, etc. A small program which can remain "always on top".
I am using Gkrellm but the problem is it does not updates itself constantly, I mean I have to close/open its eth0 monitoring window to view changes (I am not talking about restarting Gkrellm, only the bandwidth window which shows the daily, monthly bandwidths)
View 7 Replies
View Related
Sep 19, 2010
What is the absolute quickest or easiest way to block an incoming connection by their IP address? I'm running an apache2 LAMP server on Ubuntu 8.10. For example, let's say I'm watching my server error logs and I see someone using a script to check for phpmyadmin and other such folders. Right away I know this is a hack attempt. Firestarter does not allow ANY way to block an incoming connection by IP (to my disappointment) and adding the IP to an apache configuration file requires an apache restart (way too much trouble and time).
View 5 Replies
View Related
Apr 8, 2010
I am looking for a simple process monitor to monitor CPU, ram, swap usage of selected processes and log the information to a csv file at a specified interval.
Or is there a way pipe the information I want from top to a csv file?
View 2 Replies
View Related
Feb 16, 2010
my isp is putting a max bandwidth in my area and I need to monitor my downloads and uploads per month. Is there anything that has a gui that is easy to set up and just shows the amount of data downloaded and uploaded per month. Also if possible to do a pop up if you set a maximum bandwidth amount.
View 2 Replies
View Related
Dec 28, 2010
Is there any tool in linux, so that the bandwidth, each user consuming, can be monitored.
View 2 Replies
View Related
Jan 29, 2010
Is there anyway to monitor the current bandwidth in use by a user (NCSA auth) on squid? Occasionally we get a user downloading too many videos at once, which blocks bandwidth to other users on the network. As I have no idea which user it is until the end of the day (SARG reports), we just restart the squid server to disconnect their downloads.
View 6 Replies
View Related
May 2, 2010
I wanted to know is there any way to monitor (I mean log)all of the activity of the users that logging in a server (as root) for example:
1.when do they logging in
2.what commands do they use at what time ( I know that history command do somehow the same but it does not save all of the activity of users exactly with the time of that activity)
3.which one of them installed which package on the server
4.what did they copy or move at what time and summery all the activity that each of them do on the server individually.
View 1 Replies
View Related
Apr 4, 2010
I'm just getting familiar with my new VPS. I have webmin installed. I'd like to host more than 1 website on my server and I just can't figure out how to add a new domain (addon domain) to my server.
View 1 Replies
View Related
Jun 17, 2010
I recently started with Amazon's EC2, and it's been smooth sailing up to this point. I installed the official EBS AMI ( ami-714ba518 ) for Ubuntu 10.04 and installed LAMP, etc. All this worked fine. However, Webmin is a bust. I cannot fathom why I can't get Webmin working after adding the webmin repo and installing via apt-get. This worked just fine on my physical server, but on Amazon it gives me "Firefox can't establish a connection to the server at xxxxxxx:10000." I made sure my security group allowed port 10000 through to my IP, and MySQL client connections work fine, so that can't be the problem.
View 9 Replies
View Related
Sep 5, 2010
Webmin running two websites from one server, i've made a second virtual server for my second site including its own document root with it's own index.html file ,but for some odd reason they both run the same site. And i use a Static ip address.
Sites:
[URL]
View 7 Replies
View Related
May 4, 2011
I have just done a fresh install of server 11.04 32bit.I installed webmin. I can hit webmin , but it doesn't take my login. I tried with both my users but it refuses to log me in as if my username or password is wrong.
View 5 Replies
View Related
Feb 5, 2010
I installed firestarter and then at a later date uninstalled/purged it, both actions via synaptic. I have a very verbose boot, I like to see what's going on, and noticed after the uninstall/purge that I was getting an error zooming up the screen containing firestarter in it. After many restarts I found that a file was left in /etc/network/if-up.d/50firestarter and this file was simply a script trying to restart firestarter. At this point I've commented out the calling line and followed the commented line with exit 0. This removes the error but there's still a link calling the file so, is this a bug or am I missing something? It appears the uninstall/purge wasn't entirely complete.
View 1 Replies
View Related
Apr 2, 2010
I put together this 500+ page .pdf how-to, if your looking to setup a server, and manage it with Webmin. built on Debian, but should work here to for the most part[URL]..
View 9 Replies
View Related
Apr 11, 2010
I was wondering if I can use a different port for WebMin down below 1024 where I forward ports to my Linux box, rather than the current 10,000.
The reason is I forward higher ports to the Windows machine at present.
The goal is to keep Linux services down in the low port range. Suggestions?
View 3 Replies
View Related
Nov 27, 2010
I am planning to setup my own webserver using webmin, but from what i've read i apprently need two harddrives. one for the OS & one for the data. can i just partition my harddrive into two because i dont have another hdd lying around. i also just want to note that this is my first time trying to do something like this sooo I rly want to try to set up my own server . As a side note ill list the specs of the comp i plan to use as a server. Pentium 4 2.8ghz, 1gb DDR, 80GB 7200RPM HDD.
View 7 Replies
View Related
Mar 7, 2011
I want to make a daily backup of my websites from ubuntu server over ftp to another server I own. Backup schedule and process works, the problem is backup restore. Winrar says: The file is corrupt, 7-zip crashes.
Backup archive looks ok (the same size as original folder) and you can also extract it ignoring the error by winrar. But the extracted folder only contains one or two subfolder and one file(usually image) and that's all.
If I try to restore from Webmin it doesn't report any error, and it looks like restore worked. But restored files are nowhere.
View 5 Replies
View Related
