I'd like to find some sort of program which can tell me how much incoming data I've had in the last 24 hours. It goes by hours, not by days, but anything that's simple and that can display this will do. Is there any sort of program that does this? Something that would fit well with Ubuntu's style wouldn't hurt, but I'm not that worried about it as long as it does the job.
View 1 Replies
my isp is putting a max bandwidth in my area and I need to monitor my downloads and uploads per month. Is there anything that has a gui that is easy to set up and just shows the amount of data downloaded and uploaded per month. Also if possible to do a pop up if you set a maximum bandwidth amount.
View 2 Replies View RelatedI come from a windows world where there's a magical tool called netlimiter that allows me to shape bandwidth and watch upload and download traffic: And easily check stats: I wonder if there's such a beauty for linux?
View 1 Replies View Relatedis there any way to monitor each application network bandwidth usage ?I've used gnome-system-monitor, but unfortunately it just show the total network activity
View 3 Replies View RelatedCan I, with only the use of IPTABLES, limit the incoming bandwith for a protocol? We have for example servers that have a FTP and HTTP server running and whenever HTTP has a lot of connections open, the other uploads/downloads get a timeout. I know I can limit the number of connections but prefer to limit on protocol level. Is this possible using IPTABLES and if so, can someone indicate how to proceed or provide a link? If it's not possible can someone point me to the right tool for the job?
View 6 Replies View RelatedI'm on Comcast (insert vomit sound here) and they have a 250GB monthly limit. I don't think I'm remotely close to this on a normal month and want to figure out if I could perhaps squeak by with the 5GB limit imposed by Verizon's 3G wireless broadband.
I'm ideally looking for a quick easy-to-use GUI application, rather than something that's done via the command line.
I thought perhaps I could look in my Account and find a nice "You've used X percent of 250 GB thus far" window. Then I called, but Comcast couldn't tell me. They just borked me off to some Windoze application 3rd party which I'm supposed to install.
I run Skype and occasionally download Fedora iso images and so on. Rarely am I doing more than surfing the web, chatting, and sending emails. I doubt I'm even close to 250GBs but I'm guessing that 5GB will end up being problematic.
Are there any programs that will keep track of how much bandwidth I'm using? It'd be great to have an application that runs there in the taskbar and just shows a graph of how much I've used thus far.
I want to know my DSL bandwidth usage in the last 15 days.I have no network monitoring software installed.I have the default installation and my distribution is Opensuse 11.2.Is there a way I can get that information from the vanilla system?
View 2 Replies View RelatedI want a bandwidth monitor which performs constant monitoring of the ethernet. I want to see how much bandwidth I am spending by opening each website, downloading, etc. A small program which can remain "always on top".
I am using Gkrellm but the problem is it does not updates itself constantly, I mean I have to close/open its eth0 monitoring window to view changes (I am not talking about restarting Gkrellm, only the bandwidth window which shows the daily, monthly bandwidths)
Is there any tool in linux, so that the bandwidth, each user consuming, can be monitored.
View 2 Replies View RelatedI created a the class like this for shaping the packets with a specified bandwidth rate.....
tc qdisc del dev eth0 root
tc qdisc add dev eth0 root handle 1: htb default 15
tc class add dev eth0 parent 1:0 classid 1:1 htb rate 750kbit ceil 750kbit
tc class add dev eth0 parent 1:1 classid 1:3 htb rate 600kbit ceil 750kbit prio 0
For Our Requirement:-
I dont want to specify the bandwidth rate strictly like this rate750kbit ceil 750kbit,based on whatever speed is coming which should allocate the bandwidth rate for particular class...I need one application for finding the upcoming bandwidth & Is any other method is there for specify the bandwidth rate in a classes.
When trying to access my HTC Vogue via bluetooth, I can view all my files EXCEPT the music directory I made on my sd card (which is actually the one i wanted...). When trying to view it, nautilus gives the following error:
Code:
The folder contents could not be displayed. Couldn't parse the incoming data. A quick google revealed [URL]../+s...ez/+bug/310231 however I'm fairly noobish when it comes to compiling so could someone perhaps direct me with the commands? Edit: Sorry forgot to mention its the second post on that website.
Is there any tool similar to NetMonitor for Ubuntu, which can be used to monitor the data usage.
View 1 Replies View RelatedI am hosting some websites and i want to monitor who is using more resources from a thoughput standpoint... Would this be bandwidth monitoring. can use to monitor these sites. I am using an uptodate version of apache2 and a single ip vhost setup.
View 9 Replies View RelatedI live in the boonies, so I have satellite internet. It's not too bad, but I'm restricted to 200 mb's of download per day.
I'm looking for an app that will keep track of my usage, so I don't go over 200. I was using "System Monitor", but it's a little buggy, so I'd like to try something else.
I want to do bandwidth aggregation of two USB data card in UBUNTU.
View 3 Replies View RelatedI have my system connected to a sky wifi box (LAN connection) for my broadband, I also have about 4 tenants connected too, via wireless.
I was wondering if there were a program that i could run on my system that could monitor, or that i could use that would tell me how much data each person is using/downloading and what websites they were viewing etc..
when the server is getting overloaded with users. At present I run the server mainly as a proxy server with about 100 users. The bandwidth at the data centre is 100Mbps connection with total bandwidth used last month = 17431.16 MB
I would like to add a VPN in future but feel that this might overload the bandwidth as instead of it just being web traffic it will the entire client TCP connections. I would like to monitor this before it gets to the stage where users are complaining but not sure how to gauge whether the proxy is being overloaded. It is used mainly for video traffic.
I'm looking for a simple way to monitor and log my internet bandwidth usage. Not total network device usage, just internet usage.Something that provides a simple chart of daily, monthly, and yearly usage, but ignoring all bandwidth on my internal LAN.I notice several possible tools, such as vnstat, ntop, iftop. Yet all of them seem focused on tracking the entire network interface. I want to ignore LAN usage. I do not really care about LAN bandwidth.iftop seems intended only for on-the-fly usage and not cumulative logging. I can't tell whether vnstat or ntop can be configured to log only internet usage rather than all traffic through the network device.
I do not want to log every connection like squid. The utility should only log stats on a daily basis, but also be able to display cumulative totals from those daily entries.I don't need DNS resolution, port monitoring, etc.I prefer something that runs in the background as a service or daemon, but can provide statistics quickly with a terminal window. All I want is to view total daily, monthly, and yearly internet usage. Perhaps even pipe the output to a local email each day too.
I posted this in the Networking section, but should probably be over here. Couldn't move it. I have a transparent proxy in place. I have Webmin installed on the server. Is there an app that can monitor bandwidth in real time? Also run reports? I have SARG installed, but seems to only monitor HTTP traffic, I need to monitor all traffic. I have a bridged connection, but monitoring the outside interface is fine too.
View 5 Replies View RelatedI'm installing a server to act as a firewall between a local network and internet. I've installed Firestarter becaused it worked straitgh away (it seems that FS is configuring the routing as well). I've tried to remove it, and then I lost the access from LAN to Internet. (I don't know why -perhaps the routing is disabled then- , so I prefer to keep it).
The problem is that Webmin Bandwidth Monitor (bandwidthd) is not logging anything when FS is active. Does someone has an idea on how I could make it work? I've tried cacti and some other stuff, but it is far too complicated for me.
Is there anyway to monitor the current bandwidth in use by a user (NCSA auth) on squid? Occasionally we get a user downloading too many videos at once, which blocks bandwidth to other users on the network. As I have no idea which user it is until the end of the day (SARG reports), we just restart the squid server to disconnect their downloads.
View 6 Replies View RelatedWe have a sipmle office network set up that we also use use to connect to the internet, however of late the number of users has increased thus slowing internet access. Bandwidth upgrade is not an option thus i have to do bandwidth shaping on our linux router. The question is how do set the squid configs to allow certain IP's range a certain percentage bandwidtheg 60% and furthe divide the rest. Alternatively how can allow certain IPs to have higher bandwidth access.
View 1 Replies View RelatedI have a 500GB Hitachi external hard drive that I use for backup. It's about 17 months old and has barely been used. Two partitions reside on it: a 446.2GB ext4 partition I use for backup and an LVM partition that contains an NTFS partition and another ext4 partition.
I started it and connected it to my laptop today (after not using for 4 months). A libnotify message warned that "drive failure [was] expected in less than 24 hours." Palimpset shows "Reallocated Sector Count" with status "FAILING" and value "343 sectors" and "Current Pending Sector Count" with value "1556" and status "FAILING". At first I figured it was just the self-check being programmed for NTFS only (not unheard of). But then I saw that Palimpset has the Linux partition labelled as "unrecognized". The temperature is normal (about 20�C). What's going on here?I have not mounted the drive yet and the data is largely unimportant, so I'm more concerned about the hardware (even though hardware damage seems the unlikely possibility). To prevent or minimize hardware damage, what would my best course of action be?
I'm looking for a powerful network traffic monitor that can do all of the following (or at least a combination of tools that can do the following):
Tell me how much data was downloaded/uploaded on an interface this month and the previous month tell me how the traffic was used throughout the monthshow which internal IPs (IPs in the 192.168.1.0/24 network) used how much traffic show which ports/protocols on those IPs used all that traffic
Hhow LIVE traffic flow statistics that can tell me total speed of traffic going through an interface as well asshow which internal IPs (IPs in the 192.168.1.0/24 network) are using how much of the traffic show which ports/protocols on those IPs are using that traffic
This tool will run on a linux router through which all my internal PCs are connected to the Internet. This means the tool(s) need to work with NAT (traffic being forwarded and not necessarily destined for the interfaced being monitored).
The distribution being run doesn't have a package manager so any packages or dependencies have to be manually compiled and SCPed over file by file. For this reason, the tool/tools need to be simple (things like vnstat, not things like ntop that have their own web interface).
I know that vnstat can tell me the first bullet point so it's only there incase there's a tool out there that can do everything. If there's a tool that can only do the second or third bullet point, that's great too - I'll just keep using vnstat and look for something else to do the other task.
Periodically, about 3 to 5 hours, Ubuntu disconnects from my wi-fi network and doesn't reconnect until I restart the router.This is an Ubuntu specific issue, since it doesn't happen when I boot into my Windows partition, and it doesn't happen to other computers on the network.
View 2 Replies View RelatedI have a minor Internet issue. I have a static IP address with the modem acting as a gateway only to my ISP. My Ubuntu server hosts my public IP address and I use pppoeconf to connect. Every 3 hours I lose Internet. I have wrote a short script to reconnect. I doubt that it is my ISP trying to renew that often.
View 8 Replies View RelatedMy laptop has become very sluggish. So I loaded firestarter firewall. It is reporting loads of incoming UDP traffic. I only use this machine for Skype and Firefox based work as most of my stuff is kept on the cloud. Is it safe to stop all this UDP traffic? It would free up my CPU I guess. It seems port 56095 is getting hammered.
View 8 Replies View RelatedI have a hp dv3 laptop which dual boots Win7 and Ubuntu 9.1 64 bit. I have no issues with my wireless adapter in Win7, but I lose connection after a couple of hours in Ubuntu. When connection is lost it is not possible to view any wireless signals, the adapter is basically turned off. The only way to restore the connection is to reboot, then Ubuntu will again automatically connect to my WP2 encrypted router. My wireless adapter is a AR928X made by Atheros.
View 4 Replies View RelatedI'm using Ubuntu 10.04 32 bits and a Realtek 8185 wireless card. The card worked perfectly fine with WPA for a long time in Windows 7, but on Ubuntu I'm having problems. Using it without installing anything else makes it work for a very short time. It disconnects after a while and I have no other choice but to restart the computer.
Using windows drivers and ndiswrapper doesn't work at all (in fact it makes things worse because it stops recognizing my card at all). Using the linux drivers from Realtek's website is what works the best so far. I had to compile them and install them. But it still disconnects after a few hours if I'm using WEP (and only after a few minutes if I'm using WPA). I looked at other people with 8185 problems in this forum but their solutions didn't work for me.
I'm using Linux Mint 8 KDE, which is essentially kubuntu karmic.
Been trying to set up bittorrent (tried several different apps), have followed all the usual steps, forwarded ports on both Guarddog and my router, but still no incoming connections. Then tried disabling the firewall in Guarddog - still no incoming connections. Never had any problems configuring my router before so can only think that there must be something else blocking ports in linux other than iptables.Also had same problem just using ufw and gufw
