Server :: Apache Configuration - Pages Do Not Load
Mar 20, 2010
I have apache running on my server, and also Zoneminder, a surveillance system running on the same machine. Both services runs without glitches, and I think apache's config as well as ZM's config are fine. I am not sure I understand how apache (not to mention the whole thing zoneminder, apache, web browser...) works. Pretty hard to manage when you dont know what you are doing. Also, when I try the supposed to work zoneminder webpage in my web browser, I get nothing (a blank page), or sometimes a "Not found" error message. The latest seems to be from apache because it is the same font as the "It works!" message when I try http://localhost:80
The only bit of information I have so far is in the apache error log (/var/log/httpd/error_log) and it says:
Code:
[Sun Mar 21 00:35:14 2010] [error] [client 192.168.0.100] script '/srv/httpd/htdocs/zm.php' not found or unable to stat
[Sun Mar 21 00:46:04 2010] [error] [client 127.0.0.1] File does not exist: /srv/httpd/htdocs/zm
It seems that the "zm.php" is missing.... That would be why Apache cant find the page?
View 14 Replies
ADVERTISEMENT
Aug 13, 2010
I have 2 servers that are mirrored. They host 3 separate websites. Two of these websites are regular HTTP and the other is HTTPS with Digest authentication as well. The reason there are 2 servers is because one is a primary and the other secondary in case the primary goes down. Recently I decided to upgrade the secondary server then make it the primary server. I have done most of the configuration and the sites using regular HTTP are working perfectly fine. The page using SSL is not. Apache fails to load and here are the errors I am receiving the the error log file:
Code:
[Fri Aug 13 09:27:00 2010] [warn] RSA server certificate CommonName (CN) `newserver.domain.com' does NOT match server name!?
[Fri Aug 13 09:27:00 2010] [error] Unable to configure RSA server private key
[Fri Aug 13 09:27:00 2010] [error] SSL Library Error: 185073780 error:0B080074:x509 certificate routines:X509_check_private_key:key values mismatch
For the first warning, I cannot find anywhere that says the CN "newserver.domain.com", only what the CN is in the SSL key. I have no idea where to even start with the other errors.
View 1 Replies
View Related
Apr 16, 2010
I've enabled LDAP authentication on my 2.2.15 Apache server, but now pages load very slowly. As in, 1.515s with it enabled, and 187.4ms without (just the base page, numbers collected via Firebug). Here's my LDAP config (other directives snipped) -
Code:
LoadModule ldap_module modules/mod_ldap.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LDAPSharedCacheSize 500000
LDAPCacheEntries 2048
LDAPCacheTTL 3600
LDAPOpCacheEntries 2048
LDAPOpCacheTTL 3600 LDAPTrustedGlobalCert CA_DER ssl/ldapserver.der
<Directory "/example">
AuthType Basic
AuthBasicProvider ldap
AuthName "intranet credentials"
AuthLDAPURL "ldaps://ldap.example.com/ou=ldap,o=example.com?mail"
Require ldap-group cn=example,grp,ou=memberlist,ou=groups,o=example.com
How can I speed this up, or at least determine why it's so slow?
View 2 Replies
View Related
Dec 13, 2010
Im using fedora 8 and have installed php5 ,and mysql and i see only php blank pages ,some idea? must be php.ini, but i am newbie installing php and apache, i disabled selinux, and grant all the permisssions to excecute..
View 3 Replies
View Related
Feb 19, 2010
I have a Cent OS 5.4 32 bit final installed in my dedicated server.
I used to run lighttpd with php in my server until now and all was fine.But yesterday I changed my website which needs apache to run. So installed apache using yum install httpd command.
Then I added the virtual host name of my domain in webmin panel but when i try to run my php script in browser then its not opening php pages.
Instead it downloads php files like index.php when i open in browser.So I guess apache is not able to compile and run php pages. Only html pages are opening right now..
View 2 Replies
View Related
Jul 9, 2011
I am trying to set up my Apache server with FastCGI as the CGI engine. It will be mostly running PHP, but I may add Perl or something else later. I started from a completely fresh install of Ubuntu 11.04 with every update available. I used the install CD to install a LAMP server as part of the system install.I am using the tutorial at URL...to add the FastCGI functionality. I am having some problems with getting everything to work.The first problem was that apache2-suexec-custom wouldn't accept a different document root. I fixed that by compiling apache2-suexec from source with the document root changed to the correct path.
The next problem is that every php page I load throws a 500 error. Apache's error logs show that FastCGI isn't returning the page data correctly to Apache.
View 1 Replies
View Related
May 16, 2011
I just tried changed the port that apache runs on from 80 to 8080 (I need port 80 for a difference service so I am changing the apache port). After doing this I load 127.0.0.1:8080 in a browser and get a 404 error generated by apache, if I change it back to 80 it works fine.
View 2 Replies
View Related
May 14, 2009
Most of my googling odysseies lead me to articles which talk about compiling apache & php from the source as this is touted to be more flexible. But the problem we have is this...we already have an apache 2 web server running. Now how do we serve php pages of it.
View 1 Replies
View Related
Oct 14, 2010
I rented a server to run CS 1.6 game servers. I had someone install Apache and configure my server to be able to use control panel for my game servers( i am running 4 gservers and have 5 ips = 1 ip is free). When i type my primary ip in the web browser it displays the Apache test page.
My question is can i add pages to the Apache without messing up anything with the control panel or my game servers. I am familiar with html. My primary ip is used for 1 of th egame servers but i can change that if necessary. And if possible to add pages how to add a site name, sth like [url] instead of entering the primary ip to display the content.
View 4 Replies
View Related
Jan 26, 2011
I'm trying to setup an Apache webserver on my computer in order to practice HTML5/CSS3 for an upcoming competition I'm in. I'm able to access my site from inside my network, but I cannot outside my network. I've had several people try, and they all report that the server just times out. I'm running Ubuntu 10.04 and Apache 2.2.17
My site is at [URL]
Here is the output of ifconfig
Code:
eth0 Link encap:Ethernet HWaddr 00:26:22:50:0f:0a
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
[Code]....
View 4 Replies
View Related
Jun 18, 2009
I want to put Google analytics code on all legacy pages on my server, most of them don't have a template so I was wondering if Apache can automatically append the code.
View 2 Replies
View Related
May 27, 2010
I am using KVM and created four guest Operating systems on it. The server host is Ubuntu 10.04.I am using 4 websites in a reverse proxy environment. One of our website is running on CentOS VM. Right now there is no traffic on the website static HTML pages. I do not have any clue as why it was taking longer time to be accessed.
View 17 Replies
View Related
Apr 2, 2011
on an old server of mine, as soon as apache is started, the load average that I get to see with 'top', that normally is under 1, now just steadily climbs up and up to easily 150, in fact disabling the webserver from serving any webpage. I've checked netstat, and I'll try to upload the output. The ip's that are in there I've blocked with iptables. But that doesn't help or so it seems. I see nothing weird in the error logs. As soon as I stop apache, the load goes back to normal. As soon as I (re)start it, up it goes again. What can cause this and how do I get rid of it?
p.s. It's an old server, fedora3 or so, and I've got a new one to which I'll transfer the domains, but until that's completely done, I'd like this one to run as it has for years...
View 1 Replies
View Related
Jul 28, 2010
I have a apache cluster with more than 10 nodes, based on ldirector and heartbeat. The problem is that I cannot predict if my nodes will handle the traffic in the next day (hosting a website based on daily campaigns). So I decided to limit the number of active connection on the nodes (from apache), but this is only a temporary solution. I want to create a page that will appear to users that are getting over the limit. Has anyone made this before? Can you tell me how is it possible (I don't want a how to, just a starting point to study)? I think squid can do it, but I don't know how to search for it. To give you an example of what I want, you can see the same thing on deviantart.
View 3 Replies
View Related
Feb 10, 2010
my server and it had a load of 60 so i immediately took down apache and the load went back down to 0 in a few mins and every time i put it back on the cpu usage on both cores immediately goes to 100% and the load goes up to 20 in just 60 seconds until i take apache down again?
View 6 Replies
View Related
Feb 16, 2010
I already setup the load balancer and two servers behind it with this kind of topology
Code:
_ Server 1
request -> DIRECTOR /
\_
Server 2
[code]....
The problem is when I try to hit the 192.168.1.1, it sometimes give me a HTTP 200 and sometimes it will timed out. I hit it using lynx -dump. It should return "Hello world!" if success. But if we hit it directly to 192.168.1.2:80 and 192.168.1.3:80, it will return HTTP 200 which means no error and no timeout. Since the Server 1 is the same as Server 2 in configuration, are there somethings I missed here?
Another information is that I set the director using round robin algorithm, so everytime a successful hit returned from server 1, the next one is surely heading to Server 2 right? Based on the Apache's access log, I also knew that the timed out occured only when it is the Server 2's turn to handle the request. Aside from the same httpd.conf and the same httpd version are there any things in the system level, kernel level that should be the same between those two servers?
View 1 Replies
View Related
May 14, 2010
I'm very new to Linux, and I have ran a Windows XP server before, with a Apache2 Server software for Windows. and didn't have any problems with it, but I really want to set this server up with Linux.
The server is running, but the only thing that comes up in the browser, is the html pages, the pages call all the images from a folder /images/ but for some reason I can't get it to pull the folder up. None of the graphics show on any of the pages.
I also have a VirtualHost setup, and have another website set up in the DocumentRoot with the 2nd site, but it won't come up ether, even tho it is listed as the 2nd VirtualHost, and have that folder set up as the DocumentRoot.
I'm just using IP Addresses for now till I get this all sorted out.So if I enter the IP the main page comes up, just no graphics. if I enter the IP Address/2ndSiteFolder/ I get a directory listing with the 2nd site folder listed, so now if I click on the 2ndSiteFolderName, it comes up as IP/2ndSiteFolder/2ndSiteFolder/ Now the 2nd site comes up, and so does all the Graphics for that site, even if I go to some of the other subfolders site. So its just weird. I don't know what I need to do to get this to work right.
I know it has to do with setting up the folders for VirtualHost, I just don't know what it is. I have been working on this for a week, and I'm not getting anywhere..
View 9 Replies
View Related
Mar 21, 2011
I have install Mandriva 2009 and install apache server but its not strating on default configuration file . What I should do for starting apache . i have tried /etc/init.d/httpd start but apache is not running .
View 1 Replies
View Related
Aug 15, 2010
I am configuring apche on rhel5, I got default page successfully, and virtual page too, when I keep only one file index.html in virtual folder it goes well, that file opens correctly, but when I keep other html files except index.html server shows default page again.
View 2 Replies
View Related
Apr 28, 2010
If any one knows about Apache-Tomcat installation.
View 5 Replies
View Related
Sep 30, 2010
i have several sites hosted on one machine (Apache 2.2 on Debian). They are configured at /etc/apache2/sites-available/ with this configuration (part of it):
RewriteMap lowercase int:tolower
RewriteRule ^(.+) ${lowercase:%{SERVER_NAME}}$1 [C]
RewriteRule ^(([^./]+.)?site1.com)/(.*) /www/site1.com/www/root/$3 [L]
RewriteRule ^(([^./]+.)?site2.com)/(.*) /www/site2.com/www/root/$3 [L]
RewriteRule ^(([^./]+.)?site3.com)/(.*) /www/site3.com/www/root/$3 [L]
RewriteRule ^(([^./]+.)?site4.com)/(.*) /www/site4.com/www/root/$3 [L]
[Code]...
View 1 Replies
View Related
Aug 16, 2010
CentOS 5.5 + Apache 2.2(httpd.conf) + SSL confiuguration(ssl.conf) gives following error in FireFox.Secure connection failed.An error occured during a connection to localhost.SSL received a record that exceeded the maximum possible length.Errorcode:s_error_rx_record_too_longThe page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
View 1 Replies
View Related
Jan 13, 2010
I have a Cent OS 5.4 32 bit final installed in my dedicated server. I used to run lighttpd with php in my server until now and all was fine. But yesterday I changed my website which needs apache to run. So installed apache using yum install httpd command. Then I added the virtual host name of my domain in webmin panel but when i try to run my php script in browser then its not opening php pages. Instead it downloads php files like index.php when i open in browser. So I guess apache is not able to compile and run php pages. Only html pages are opening right now..
View 2 Replies
View Related
May 26, 2011
I have installed latest Nagios and Nagios plugins. Nagios is working properly, but when I go to the browser n write the www.server-name.com/nagios, it gives
Not Found
The requested URL /nagios/ was not found on this server. How can I tell Apache to open Nagios on adding /nagios in my URL.
View 2 Replies
View Related
Mar 4, 2011
I need to tune the mysql and apache server for the comparatively busy webserver. My scenario is like this.
1. The Web request is around 2000 request at a time or more.
2. Each web request will generate one mysql query.
3. The query to database is all read.
4. This server load will be at peak for around 3-4 hours after that the load will subside. As the task will be published, around 300,000 will be viewing the page.
5 quad servers are deployed, load is balanced via DNS but performance is not as expected. Centos 5.5 is used as OS. Top command shows The mysql process is around 185%!
View 3 Replies
View Related
Dec 16, 2010
I created VirtualHost in apache configuration file.
Code:
NameVirtualHost 77.79.13.20:80
<VirtualHost 77.79.13.20:80>
DocumentRoot "/var/www/host"
ServerName host.t2p.lt
</VirtualHost>
[Code]...
View 1 Replies
View Related
Mar 30, 2010
Ive just install Midori, and overall I like this browser. But certain pages aren't loading in Midori. Like this forum, Fedoraforum.org. On exactly the same laptop, I can open this page with Firefox. How can I fix this?
View 14 Replies
View Related
Mar 15, 2010
Pages do not load on certain sites (such as LinkedIn and Which? for example). The sites themselves load but when I click on links the pages load forever. With Which? I can close FF and open it again and then the link loads but after a few clicks they stop loading. It happens on all browsers (at least I tried FF and Chromium) but OK on Windows.
View 4 Replies
View Related
May 17, 2010
Out of no where Firefox has just decided to not load web pages anymore. I've restarted my router, restarted my wifi card, restarted my computer, *completly* uninstalled Firefox then reinstalled it, still no luck at all. Anyone have any idea how to fix this? I'm stuck using Google Chrome now, I like it but I need the Add-Ons FireFox has (AdBlock Plus, Xmarks, DownThemAll, etc.)
Here are my specs:
Ubuntu 10.04 64bit
Acer Aspire 3680
Intel Celeron M 1.6GHz Single Core
1GiB RAM
40GiB Hard Drive
Basically all it does is sit there saying "Connecting to www.google.com..." for like 15seconds then gives me one of two pages, "The connection has timed out - The server at www.google.com is taking too long to respond." or "Unable to connect - Firefox can't establish a connection to the server at www.google.com."Google Chrome, Skype, Ubuntu's built in messenger, System Update, and so on connect just fine to the internet.
View 5 Replies
View Related
Jun 30, 2010
Yesterday I upgraded from 9.10 to 10.04 using the built in upgrader. After upgrading, whenever I open Firefox, it will just say "The connection has timed out" for every page, but I am connected to the internet. Also, w3m will not load any web pages as well. But I am connected to the internet, because pidgin works, apt-get works, ping, and telnet work.
I will ping google.com with success each time, then attempt to load google.com in Firefox and it will say that it cannot connect to the host. I have tried both "Connect directly to the internet" and "Connect using system proxy settings" for Firefox (the system settings are to connect directly to the internet).
I then thought that maybe something was blocking port 80, so I used telnet (telnet google.com 80), and with that, I got the HTML response of [URL]. what can I do to make my computer able to brows the web again? I am running Ubuntu 10.04 with kernel 2.6.32-22 on a Compaq Presario CQ60-417DX Notebook.
Processor: Intel Celeron 900 @ 2.20 GHz
RAM: 3.00 GB
View 3 Replies
View Related
