I have an old HP T5700 thin client. I have replaced the FLASH memory with an 2.5" hard drive and have installed a minimal version of Ubuntu Lucid on it. I would like to get the audio to work - specifically the microphone. sudo aplay -l gives:
[Code]...
Environment: Ubuntu 9.04 Server/Thin Client. I tried to use KTouch in a classroom with 20 students working at thin client workstations. I thought KTouch was supposed to keep track of the students' typing statistics, what lessons they completed, etc. However, the students get no statistics or any record of what they have done.
Where can I find information on how KTouch is supposed to record/store this information?
We are using thin client systems in our work environment. There is a central ubuntu server and by using thin clients, we are connecting to our homes. The problem is when I try to install an application, it reported me that I had 200 mb of disk space. But when i try to look from console, I see that /home folder has over 250 gb s of disk space. Even when I try to look from baobab, Disk Usage Analyzer in Ubuntu, i see that my home file system is full.
So what's the reason that I am receiving different kinds of disk space report from different sources? Our system admin here told me that some applications foolishly try to see the physical devices on the thin client and got confused as a result. Is this true?
I just finished setting up a new computer lab at my kids school, using LTSP and 22 think clients connecting to Ubuntu.Everything is going beautifully, and I'm using static IPs and autologin so that when each computer is turned on it logs itself in with no userintervention. The problem is, when users go to the top right system menu and select "Shut Down", they are brought out to the login screen for a second and then immediately logged back in automatically to the Desktop. How should I be shutting down the thin clients?he only way to do it at the moment is to have everyone hold the power button down until the CPU shuts off, but it feels sloppy and unhealthy.
View 3 Replies View Relatedis there anyone knows how to setup and configure thin client in edubuntu 10.04?. From the beginning installation until thin client work.we have 2 set of computers. 1 computer installed edubuntu 10.04 and installed LTSP (Linux Terminal Server Project) in the OS without NIC Card. And the other computers has only NIC card.. We setup it in the bios as a "First Boot" Network Card. We connect 2 computers using "pair-to-pair connection". There and after, we restart the 2 computers. "Nothings Happened".
View 3 Replies View RelatedI'm attempting to take Ubuntu 10 down to an image as small as possible to support Citrix Receiver. We currently log them into a browser interface using Firefox where they authenticate against a Citrix DDC and then launch the plug-in. I'm wondering if there is a simple way to determine what services I can shutoff to limit the footprint of the OS. Some of the machines have only 256MB of RAM. They run the plug-in just fine, but there's a lot background activity affecting the machines...
View 4 Replies View RelatedAfter switching over to linux on my desktop PC (ubuntu) I would like te learn more about linux.I'm trying to get an ELO touchscreen working on an IBM thin client. At the moment I managed to boot it from a CF card.(normally it boots kernel.2200 from a host PC but to avoid interference with the operating system, a flight simulator, I want to try it first with the system booted from a flash card)
I tried to install the 32 bit Linux driver from the ELO-website but did not succeed.I was following the manual.I managed to extract the files and copied them to the right directory but when I type in "make" the command is not recognised. I don't know if it would ever work, but when I tried "make" on my Ubuntu machine I get error #2?! What does that mean.
I'm looking for a Micro Distro based on Debian, to install it on a bootable USB stick and to use it as a Thin Client.
View 2 Replies View RelatedI would like have my client computer be able to boot off of a cd right into a terminal server connection. Not click here, then there, enable wireless....so on.. Just boot into a terminal server connection screen.
View 1 Replies View Relatedi want to share the Internet connection to thin client from my Ubuntu server,Internet is accessible to my Ubuntu server but i am unable to boot from thin client to server,i configured DHCP but of no use.can any plz send me the detailed steps to configure thin clients in my network
View 1 Replies View Relatedgetting a CAC reader to work with a PXE booted Ubuntu LTSP thin client?
View 3 Replies View RelatedI have been working/implementing LTSP based thin clients now using Ubuntu 10.04 LTS 32bit server. I intend to change the default purple Ubuntu splash. I have already removed the "quiet splash" parameters in the pxeconfig file. And it works, giving me a text boot. But what i needed was a replacement for the splash.
View 1 Replies View RelatedI have Samba PDC server on CentOS 5..we have 10 thin clients in our network which were working fine previously with the windows Terminal services... Now i have replaced my windows 2003 Domain to Samba Domain Controller.. Is there any why i can connect our thin clients with SAMBA DC in the our environment?
View 2 Replies View RelatedI am trying to install and configure LTSP on a server for a HP thin client to boot off. The version of Ubuntu that I am using is 11.04 x86 and it is a fresh install on a dual core system with 2GB RAM. I followed a guide which comprised of these commands.
sudo apt-get install ltsp-server-standalone openssh-server sudo ltsp-build-client or if your on a 64-bit system with 32-bit machines do sudo ltsp-build-client arch i386 for editing the servers IP values use /etc/ltsp/dhcpd.conf after that you need to restart DHCP server sudo /etc/init.d/dhcp3-server restart
and update sshkeys -sudo ltsp-update-sshkeys and if you updated dhcpd.conf then you need to update you image also by typing in terminal ltsp-update-image
Everything seemed to install as it should but when I try to boot from the thin client it just times out and says no DHCP or proxy invites received. I turned DHCP off on the router and even tried another router, but I still get nothing. I am at a bit of a loose end and I hope someone on here can point me in the right direction of where I am going wrong.
plz can any one help me in configuring linux server 5.0 to share the internet connection to thinclient and the steps reqiure at client side and server
View 2 Replies View RelatedDoes anyone know if hp thin client linux version supports desktop icons?
View 3 Replies View RelatedAnyone know how to compile fedora core to be used as a thin client / dumb terminal with a small kernel?
View 4 Replies View RelatedSkype works fine on openSUSE 11.2, but I'd like to use another application with a more open protocol (SIP) for PC-to-PC calls. Ekiga seems to be what I'm looking for, but I have a problem with audio. When I launch the echo test call, video is displayed correctly (I see myself), but I can't hear anything (I guess I am supposed to hear a ring, and maybe some instructions?...). Nothing seems to be recorded either. I tried all the different audio settings in Preferences/Audio - no luck.
I searched for some information on the web but couldn't really find anything. The troubleshooting test (arecord -D plughw:0,0 -c 1 -r 8000 -f S16_LE - | aplay -D plughw:0,0 -c 1 -r 8000 -f S16_LE -) from [URL] works fine. So what to look for? Does anyone here use ekiga successfully? How did you configure your audio? Or would you recommend another SIP client?
Why is there no opensuse jack audio client module for python like pyjack.
View 2 Replies View RelatedIn lmms there is no sound and it says:
No audio-driver working - falling back to dummy-audio-driver
in the command prompt. Sound works everywhere else just not lmms.
I have success install DNS server using BIND on Debian 6.0. and it's work with windows client. but with ubuntu I can't ping all my domain. but if I use nslookup or dig from my ubuntu client, it's work. and I try connecting my ubuntu client to internet using modem.
View 2 Replies View RelatedI would like to know if any of u can get this app to run on unbuntu..tht is the link to the file..i have wine and ie6 installed.the client opens and immediately closes so i do not know what the problem is
View 2 Replies View RelatedI have a Nis server on Suse 11 which is configured using Yast and nis clients on Suse and CentOs .All clients which is on the Suse Os is working fine. But on CentOs , users couldn't login using nis username.I have mounted home directory using nfs in fstab . I can switch to nis users homedirectory only when i am root. But nis users could'nt login on reboot.' ypcat passwd username ' is showing the output . No selinux is enabled in the client .Is there is any problem with Suse server to Centos Client in nis ??
View 2 Replies View RelatedI use command line twidge for twitter, it gives a strange error on terminal, I don't understand. I tried to update, but nothing happens.
Code:
abhilash@abhilash:~$ twidge lsrecent
curl: (22) The requested URL returned error: 401
twidge: user error (("curl",["-A","twidge v1.0.0; Haskell; GHC","-s","-S","-L","-y","60","-Y","1","--retry","2","-f","--user","abhilashm86:","[URL]"]): exited with code 22)
It was working fine from starting, is anything problem with updates/ program?
[my virtuale machine(linux4) not sync with ntp server
dmeg show :
I have installed winbind, portmap, and samba/smbclient packages on the workstation linux ubuntu , which is intended to be client to samba for /etc/password attached to the server. At boot nothing changed, and the /etc/password is not attached to samba. So my passwords are stil the local of hte client, and not the server. This is my config of the client workstation:
[Code]...
i recently installed lubuntu on my netbook, i love it but the only problem is i dont get audio, ive tried a few things, but nothing has worked. i have a bit of terminal experience, so i dont mind using that
View 2 Replies View RelatedI think since I updated to Fedora 15 my fonts in Firefox are really thin now. I'm using the same font settings in the new Firefox but I can't really read anything enymore, because the font is so thin.How can I change the font?Here is a similar question:[URL]
View 13 Replies View RelatedI'm running LTSP on 11.04. The clients boot fine and will recognise the local CD and local USB drives but it doesn't mount the HD?
View 1 Replies View RelatedI had the "set-cap" exception problem, so when the fix was released, I updated. Since then, the ubuntuone-preferences dialog will not start or work. I tried the me bar, the system menu, and the CLI.Now, I bought some music the first day the store opened and it downloaded fine. Then yesterday I bought another album and the store hangs on "downloading the files." Six hours later, it still won't move.
It gets weirder. The music store says its trying to download a couple of tracks from the first album (even though they are already downloaded), the second album shows up as downloaded under the Web UI, but doesn't show up at all on my desktop .ubuntuone folder.I've tried the IRC a couple of times, with no response. (In fairness, it may have been bad timing, I'm in New York) I don't mind trying to sort this out myself, but I'd just like some more hints. I've looked at the syncd log and found the exception, but I don't know how else to restart the syncd. At the same time, my files *are* synching, and *one* of my address books is synching (my gmail account contacts aren't). I know this is alot at once, but I'm afraid of dividing the problem and missing something.
