Ubuntu Servers :: Set Up Apache 1.3.41 And Php4 On A Server?
Jul 27, 2010
We need to set up Apache 1.3.41 and php4 on a server since our other server just broke down.. and our current code is not compatible with apache2 and php5. I have the source files of Apache 1.3.41 and of php4. I do not have any problems in setting up php4 but, after setting up apache2 it gives me that i have successfully built Apache 1.3. But when i try to start it through apachectl it gives some errors like
Code:
Syntax error on line 329 of /usr/local/apache/conf/httpd.conf:
Invalid command 'Order', perhaps mis-spelled or defined by a module not included in the server configuration
[code]....
View 2 Replies
ADVERTISEMENT
May 22, 2011
Does anyone have some material about statistics using ubuntu / linux server, or a text which generally describes the ubuntu server?I need urgent, i'm writing specialization work about administration apache and ftp server on ubuntu 10:10 server, so I need something for the conclusion.
View 7 Replies
View Related
Dec 7, 2010
I and setting up a home web server using Ubuntu 10.04 server (local only). I am currently using Webmin 1.53 to access it remotely all is going great very easy to use. Webmin - Check, ftps-fileZilla - Check, Apache -It Works BUT I cant seam to set up Apache as a named server using Bind DSN. Tried most of the help in the fourms and ..... I think my problems is in the master server selection, do i have to use [URL]... or can i just use myservername. I have tryed both with no luck. First time with the server addition.
[code]...
View 6 Replies
View Related
Mar 6, 2011
I would like to add ROR to my web server, but I would still like to keep php. I tried doing this a few days ago, but it made my PHP unusable so that it would ask me to download a file rather than displaying the php page. how to install ruby on rails without trashing my system again.
View 3 Replies
View Related
Feb 25, 2010
I've setup a Ubuntu 9.10 LAMP server to host a word press blog on an intranet. I've got everything working except the url for the site.The IP address of the server will take me to the site URL.../But I'd rather use the server's name instead of the IP address URL...When i try to go to URL... in Firefox or IE it give me a server not found page and changes the URL to URL...I also have Webmin installed on the server and I've been playing around with the Apache module and can't figure out how to set it so i can use the server name instead of the IP address to get to the site.
View 6 Replies
View Related
Jan 28, 2010
I have it set up so when I go to URL... it shows my server. I'm not sure how I can make it viewable to everyone though.
View 3 Replies
View Related
Apr 6, 2010
My apache server don't want to start by itself on boot.
View 9 Replies
View Related
Sep 1, 2011
I am currently trying to upgrade the Apache installation on our server from v2.2.14 to v2.2.19 using:
[URL] as a guide.
Unfortunately I seem to have hit some walls. When trying to execute ./config.nice I get the following error:
./config.nice: 33: /build/buildd/apache2-2.2.14/configure: not found
Google have not yielded any results as yet. If I leave out this step and use configure, make and make install, v2.2.19 gets installed, but to a different directory and all the config will need to be reformatted as it seems it does not use the Ubuntu Apache config structure.
View 5 Replies
View Related
May 17, 2010
I have no idea what is going on here and this is the second time it has done this but. I just installed Lucid Lynx Desktop Edition for my Server. I have installed apache php5 mysql binarys. I have 3 ips on the machine 10.0.1.30, 10.0.1.37, 10.0.1.38. .30 is the main ip 10/100 the rest are 10,100,1000 ports. I can only access Apache 2.2 over .37 or .38 but not .30
I have not used Ubuntu alot but I am starting to and this really pisses me off since all my computer have aliases to the machine through .30
View 5 Replies
View Related
Jun 6, 2010
bit of a server noob having built a server to hold a php website for a client hosting at home, I have some experience, but VERY limited and don't speak fluent server.My problem is that overnight each day apache on my clients server stops responding. I can still access via putty / webmin.The best I can see it, it seems that apache 2 opens too many child processes and chokes the system. My reasoning for this is:-Though I have max child set to 20 with a keep alive of 30 there are dozens of child processes 'apache2 -k start' running, some of which were started 9.5 hours ago.
-I can stop apache, though that doesn't kill these child processes. I can terminate the parent process which does kill the child processes, however restarting apache after killing the child processes results in a system crash. Rebooting the server remotely after apache has stopped responding also results in a server crash. That is NO response on any port.I would be happy to display any pertinent server config/logs etc if anyone can help me troubleshoot this?
View 2 Replies
View Related
Dec 8, 2010
A week ago I purchased an VPS. The first few days I was having trouble to set up an outgoing connection on the VPS. Eventually it turned out to be some misconfiguration of the server where the VPS is hosted on.Since then I have installed the apache server, but I'm still not able to access the apache server from an external computer. I already have contacted the provider, but they haven't replied yet. To speed things up I was hoping someone could check my configuration to be sure nothing is wrong with it.To be sure I posted all configuration and information that I think would be important. Please contact me if you need more information.
View 2 Replies
View Related
Apr 20, 2010
I'm not sure is this is possible or not, but what I would like to do is take my public address mydomain.com and configure a virtual host something.mydomain.com only instead of having the content on the same server I would like it to point to the IP of my virtual machine that is in my private network and display that page publicly. Does anyone know if this is possible, or how to do it? I have done this with port forwards, but would like them both to be on the same port.
View 3 Replies
View Related
Sep 6, 2010
So if I disable apache 2 my ngnix server will serve the files in /var/www automatically.
View 1 Replies
View Related
Jul 11, 2011
I'm working on a side project where I would like to install three ubuntu server systems,each with only one task.So server0 would be the apache server, server1 would be the database and server2 would be the file server.which key terms I should be researching?
View 9 Replies
View Related
Sep 20, 2010
I have a web server in my kitchen with apache running on it. Since the upload speed is quite low due to my isp I would like to execute a bash script that uploads a file to another server through a website (which is htaccess protected) The idea in general: Someone with access to my website browses through a folder, copies a file path to an input form and presses "upload". Rather than executing a bash script directly I could have a cron job running in background that finds the path and then uploads the file to the other server I have userspace on and is accessible via sftp/ssh. The file would be than erased later after a couple of days or so. That person would be able to access the file with higher speed some time later without logging in via ssh and doing all that manually.
View 2 Replies
View Related
Jul 9, 2009
I'm running an Apache web server version 2.2.11 on Fedora 10. I'm trying to get it to run a PERL cgi script but with only partial success. The script uses the PERL cgi package.
The perl script is a simple test case that creates a form to fill in. Once the submit button has been clicked it should then return the data submitted. The perl script writes this to a file called output.cgi
The intial script located in /var/www/cgi-bin/index.cgi gets executed fine when I go to [URL], this works with no probs. However once I hit the button to submit the data I then get the error
Not Found
The requested URL /cgi-bin/output.cgi was not found on this server. Apache/2.2.11 (Fedora) Server at localhost Port 80 Im not sure if its a perl problem or server setup problem, theres probably a simple switch or something but Im out of ideas at the moment.
View 6 Replies
View Related
Apr 5, 2011
i have a problem with php4 istallation with redhat5 system .can anyone guide me its pssible to do or give me a link where i can able to download all php4 rpms.
View 9 Replies
View Related
Feb 6, 2010
I have F12 64bit and I really need PHP4. Some hints on how to install it?
View 1 Replies
View Related
Oct 14, 2010
I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info:
monitored server:
CentOS 5.3 2.6.18-128.1.1.el5
[code]....
View 7 Replies
View Related
Dec 23, 2009
how can i downgrade php from php5 to php4 on FC11 ?
View 3 Replies
View Related
Jul 27, 2010
I'm wondering how I can enable LDAP support for my Ubuntu 10.04 LTS server running Apache 2 and PHP 5.3.2? What I'm trying to do is allow users on my existing company's LDAP system to login to my Elgg site automatically (and possibly have their details filled automatically).
View 1 Replies
View Related
Feb 4, 2010
Any one have an idea How to clear apache cache without restarting apache server.
View 5 Replies
View Related
May 3, 2010
I have Webmin installed on an Ubuntu server. I currently have a successful apache server running on port 80, however I want to create a virtual host on port 81. When I try I go to servers->Apache Webserver-> Create Virtual Host I change the port to 81 and the document root to /var/port81www then I click create. How ever when I goto 192.168.1.5:81 (local ip, I know I have to port forward but its not even working local) it does not work.
View 5 Replies
View Related
Jan 24, 2010
I am upgrading my server and I have a lot of sites. Since I cannot take my server down for a few days, maybe a week until I manage to migrate all the sites to the new machine, I figured I could migrate them one by one. After migrating one, I would somehow tunnel the requests of that name virtual host to my internal machine. When everything is migrated, I would then switch the machines, update ip's and stuff and everything will work just fine.
However I cannot seem to find a way to do this tunneling. is this at all possible? If not, what alternatives do I have?
View 5 Replies
View Related
Jan 20, 2011
I am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
View 3 Replies
View Related
Apr 21, 2011
I'm running a linux cloud server with the following config
1.2ghz Processor allocation
752MB Ram
The site loads slow and clicking a link almost freezes the page for a second. Also, the page loads could be much faster. We've been running mysqltuner and have pretty much optimized all slow queries. Is there anything we can do to fine tune the server for faster and more responsive?
Httpd.conf
Timeout 20
KeepAlive Off
MaxKeepAliveRequests 100
KeepAliveTimeout 5
<IfModule prefork.c>
code....
View 2 Replies
View Related
Apr 23, 2010
I've run into a problem and I don't know if it's apache or php or the combination of both. I can compile apache 2.2.15 just fine, but whenever I try to compile php 5.3.2 into my server, the first two steps work just fine but when I get to the make install part it shows the libphp5.so and it just stays there and I have to cancel the install because it won't finish.
View 5 Replies
View Related
Sep 1, 2010
just switched our company from windows server to linux and everything is going good except we have 4 vpn connections though out the country coming to our server. All giving the client machines ip addresses of 192.168.x.x based on where they are located 192.168.1.x for the main location 192.168.2.x for a second location etc, and IIS could see the clients ip instead of the wan ip and was setup to block all ips except 192.168.x.x ip's and this worked great.
So i set up apache the same way, to allow only 192.168 ip's but i guess it doesn't work that way in apache for connections coming though vpn? 2 out of our 4 VPN connections are not static IP's, so the 2 that are I just add that ip to the allow list and that worked.But i don't think we should HAVE to get static ips for the other 2, that's one of the benefits of using VPN, especially if our old windows server didnt need it.Is there any way for apache to see the clients ip address for access or is there something somewhere else that needs changed for this?
View 8 Replies
View Related
Oct 6, 2010
I've got some strange looking requests in my access_log which I don't much like the look of. Can someone take a look and let me know if 1) it's possible for other people to use my server as a proxy, and 2) how I can stop them.
Code:
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "CONNECT 213.92.8.7:31204 HTTP/1.0" 200 1606
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "CONNECT 213.92.8.7:31204 HTTP/1.0" 200 1606
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "GET http://vlad-tepes.bofh.it/proxy.txt HTTP/1.0" 404 1955
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "GET http://vlad-tepes.bofh.it/proxy.txt HTTP/1.0" 404 1955
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "CONNECT 213.92.8.7:31204 HTTP/1.0" 200 1606
[Code]...
View 9 Replies
View Related
Nov 14, 2010
My Server is 8.04 (hardy) and Apache is 2.2.8. I have been receiving emails from Apache each time a new stable release is available, most of which say you should install them due to security issues. The current stable release of apache being offered is 2.2.17
Q1) Do you recommend I upgrade from Apache 2.2.8 to 2.2.17?
Q2) Does this come automatically with my regular updates via Update Manager once the Ubuntu community thinks its stable enough (it appears that it doesn't)?
Q3) What is the best way to install the update?
Q4) Any concerns about installing it into a live environment? I don't have a development platform to try it in first.
View 3 Replies
View Related
