Ubuntu :: Semi-freeze With Nvidia On X86?
Feb 27, 2010
Quite frequently, my display "semi-freezes". I can move the mouse cursor and audio keeps playing but everything else freezes (video, etc).If I click on a drop-down menu (on any programme), the display updates.I can't link it to any programme.It has been happening for quite a while (I've been too busy to try to figure it out and it's not a complete crash). I'm using the newest drivers from the nvidia website (190.53) and KDE 4.3.2 This has been occurring through several different driver versions and distro versions.
View 1 Replies
ADVERTISEMENT
Aug 8, 2010
The freeze's on my machine only appears when i monitor the temperature of
the gpu. Normally i use gkrellm to monitor temperatures including the gpu temperature. When i stop gkrellm there a no more freeze's on my system. Then i started nvdock which also monitor the gpu temperature and the freeze's are back. Stopping nvdock make the system working normally. I have done a few reboots now, warm and also cold starts und everything works normal.
System data: AMD P2 X4 940, Nvidia GTS 250, openSUSE 11.3, Nvidiadriver 256.44,
Gigabyte Mainboard GA-MA78G-DS3H rev.2,8GB RAM, KDE 4.4.95,
View 6 Replies
View Related
May 4, 2011
when i active the recommended version the ubuntu is freeze !!
View 2 Replies
View Related
May 16, 2010
I've been running F@H on my system for a while now, these specs:
ASUS Rampage Formula
Q9450 @ 3.6Ghz
4GB DDR2
8800GT 512MB
Fedora 12
Running various different nvidia drivers, with working 3D, and running the latest nvidia drivers with cuda for GPU2 folding + SMP folding.
I decided to add a 9800GT to the machine for more folding PPD, and I've run into some issues.
Firstly there were problems starting X, it would hang as it started or even before it started, so I switched to RPMFusion's repo drivers which have the VGA_ARB patch applied. This now gets me into X and working 2D.
The problem I have is, although the system is completely stable running folding on all four cores, SMP, 24/7, as soon as I start anything involving 3D (such as glxgears) it will run for 3 seconds then hardlock the machine. I mean seriously lock it, no switching to terminals, and an ssh session into it from another PC dies.
Its the same with any other driver that will boot into X with the VGA_ARB patch (talking nvidia binary here).
Both cards work perfectly individually, AND both cards work, including full 3D in Windows 7 when together, which would tend to rule out a hardware fault.
Here is my xorg.conf
Code:
View 1 Replies
View Related
Oct 28, 2010
Sometimes, running "nvidia-settings" will cause the whole desktop to freeze for about 5-10 seconds, spike the Xorg CPU usage up to 100%, until the settings appear where everything goes back to normal.
Running "nvidia-settings" from a terminal does not show any output and restarting X does not help. Any ideas how to figure out what is happening, any places to look for log files?
I am using an up-to-date openSUSE 11.3 (64-bit), KDE 4.5.2, an NVIDIA GeForce 9800GT and the proprietary NVIDIA driver 260.19.12, which I installed manually following the instructions from
SDB:NVIDIA the hard way - openSUSE
View 8 Replies
View Related
Apr 22, 2011
I have a problem that pops up with some games, sometimes: sauerbraten, lugaru, and nexuiz being the ones that pop to mind.
The problem is that when the game starts/loads the mouse "cursor" in the game will not work... the thing is frozen. The "fix" is to jump to a virtual terminal, via alt-ctrl-1, and restart KDM, then I log back into the session and everything is working swell.
This problem does not occur in Osmos, World of Goo, Warzone 2100, or the Linux Ryzom client.
I thought about adding an explicit /etc/init.d/kdm restart in my /etc/kde4/kdm/Xreset file, but that seems too draconian.
This has been a recurring problem on several machines with several 7000, 8000, and 9000 series Nvidia cards running under the proprietary driver, on both 32-bit and 64-bit AMD processors ever since Lenny and up through Wheezy. And it occurs on the following desktop/windowing environments: KDE4.4, icewm, fluxbox, blackbox, E17.
I would guess that it's a driver issue or a driver+xorg configuration issue.
PS: Please don't suggest that I should use the open source driver.
View 4 Replies
View Related
Jun 24, 2011
I am using conky 1.8.0-1.1 in my debian box. My wallpaper changes automatically after every 15 min. Based on the color sometimes it is difficult to understand the conky message. That's why I need semi-transparency which can be controlled upto a level where I can read conky easily. I have already tried with without any success
Quote:
own_window yes
own_window_type desktop
own_window_transparent yes
own_window_argb_visual yes
own_window_argb_value 200
own_window_hints undecorated,below,sticky,skip_ta
View 3 Replies
View Related
Jan 4, 2010
I have just installed 9.1 and I like to use a semi-transparent terminal so i can see text under it, but on Karmic, it shows the desktop background underneath.
View 3 Replies
View Related
Jun 18, 2010
When I log on using my laptop, it never finishes logging in nor does it throw an error - but it works fine on my desktop. 11.1 x86_64 firefox both. Rebooting the laptop doesn't fix. EDIT: Had the wrong password stored in firefox.
View 2 Replies
View Related
Feb 4, 2010
Are there any semi professional Freeware cad programs in Linux.
View 9 Replies
View Related
Sep 7, 2011
I've been using Debian for around ~3 months now, though before that a certain derivative thereof since the start of the year.Long story short is that I was installing packages, as you do, when apt-get prompted that I run apt-get autoremove, as it does. So, trusting the computer, I do, not bothering to read the chunk of packages that it recommends to remove. Life goes on, until a reboot reveals that there are issues.Short story shorter, a quick cat /var/log/dpkg.log | grep remove spits out the following:
root@kubrick:~# cat /var/log/dpkg.log | grep remove
2011-09-05 22:04:09 startup packages remove
2011-09-05 22:04:09 remove gnome-user-share 2.30.1-1 2.30.1-1
[code]....
View 8 Replies
View Related
May 6, 2011
I need to have a shell script which does the following,
1. Remove '/' in the file
2. Replace ';' with new line
Input file (sample):
TL/01039;TL/07014;TL/07016;TL/07046;TL/09476;TL/09522
Output file should be:
View 2 Replies
View Related
Jun 4, 2010
I have a Ubuntu 10.04 fresh installation on my HP laptop. Installation successful and boot OK. But the desktop randomly freeze. During freeze(about 15s each time), all programs are not responsive. Sometimes I can switch program by click, but program seems locked. How can I know which module cause the freeze?
View 4 Replies
View Related
Apr 28, 2011
this is in fact my first attempt to try to work on a linux distribution and (dispite my problem) I'm still excited to work with it! I got the taste from messing around with my android phone, so I know a little bit of the syntax of the commands that are used, but it is realy basic.Now, my problem is my screen. I have two crt-screens ( inch and inch) which I can't manage to get working properly.
1. On a fresh install I had the problem that i couldn't get my refresh rate higher than 60 htz.I tryed installing different proposed drivers via the "system -drivers" (don't know if that is the right discription, I'm Dutch).The two proposed drivers didn't solve my problem.
2. I went to NVidia and download the Linux drivers for my graphical card (GeForce 8600 GT).I've gone trough a lot of trouble installing them: you can't install them when the Xserver is running, but commands like "init 1" or "gdm stop" made my system freeze (which is an other question: is this normal?). Eventualy I managed to install it by the "boot in safe mode"-option which I can choose when I boot my computer (I'm on a dual boot with windows 7).
3. Once the drivers installed it got worse. There was only one screen working and it worked only on a resolution of 640x480. It was just horifing. But with a lot of patient I managed to get one screen working at a resolution of 1024x768 and (again) not more then 60 htz, but the other screen was still stuck at 640x480. I kept playing around with it, edited my xorg.conf file manualy, broke it, restored it, etc etc. realy fun
4. This is the status ATM: both screens are working with twinview, both at a resolution of 640x480 (I can only select a lower one) and a refresh rate which I can't edit (stuck at "auto" and certainly way to low).I have an Nvidia driver which I don't like (it has made thing worse) but I can't unistall (I realy just don't know how to do that).I'm going to give my xorg.conf file at the end of this message.If this is a very typicly question, then I excuse myself. I realy have tryed to look for it, but couldn't find a thing. And if I found something, it was explained on a level of experitise much higher then mine.
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 270.41.06 (buildmeister@swio-display-x86-rhel47-07.nvidia.com) Mon Apr 18 15:15:00 PDT 2011
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 270.41.06 (buildmeister@swio-display-x86-rhel47-07.nvidia.com) Mon Apr 18 15:15:12 PDT 2011[code]....
View 1 Replies
View Related
Mar 18, 2010
Is there any good open source AutoCAD alternative that is used by (semi)-professionals or is AutoCAD the standard?
View 2 Replies
View Related
Mar 15, 2010
I'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
View 2 Replies
View Related
May 3, 2010
I have an old video card, Nvidia XFX 7800GT, which is now beginning to fail and I need to upgrade. I am not huge a gamer but I do play/buy games on regular basis. Right now I'm playing Eternal Lands on the Linux side. Looking to spend $100-$150 on a new card.I have a Core2Duo Wolfdale 3.0, with 2ghz ram and run Lucid 32bit. Also run windows Vista64Ultimate on dual boot (rarely).
I would love to buy a new ATI 5770 or 5830, ATI budget cards seem to be much better for the buck over budget Nvidia cards, but I'm concerned with ATI drivers and long term with Ubuntu.On the Nvidia side I'm considering the GTS 250. The only advantage I can find is lower power consumption with Nvidia and Ubuntu has always preferred Nvidia over ATI, as far as working drivers go.As Far as Ubuntu and Lucid is concerned, which way is best, ATI or Nvidia? Has anything changed with ATI support, that could make theor cards more compatible now and in the future?
View 9 Replies
View Related
Apr 3, 2011
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
View 4 Replies
View Related
Sep 15, 2010
I don't know if you have heard of Nvidia FREE Rendering program, called Nvidia Gelato.
I've logged on thw web, and tried to look it up on the web. I found the webpage, but all the download link's seem to be broken.
[url]
Does anyone know if this is happening for any reason? Am I missing something? If it is broken and there is no other solutionn, Can someone send me the Gelato 2.1 Rendering source for Ubuntu 9.10?
View 4 Replies
View Related
Jan 24, 2011
i am having a problem with my just recently upgraded ubuntu 10.10 ive search google and forums for well over 4 hours with no luck so im asking here. Now i know nvidia 96 has problems with xorg 1.9 but i installed the updated nvidia 96 driver that supports xorg 1.9 through maverick-proposed and i dont have nvidia control panel under system->preferences and if i types sudo nvidia-settings in terminal i get it says im not running an nvidia driver but the hardware driver reports it as activated but not in use and nvidia settings also tells me to run nvidia-xconfig but it says this when i do sudo: nvidia-xconfig: command not found
View 6 Replies
View Related
Nov 30, 2010
Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:
Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.
View 3 Replies
View Related
Jan 2, 2010
I have 9.10 running on an old computer with a Nvidia Vanta-graphics card. Unfortunately these appearently aren't supported by 9.10, since the oldest nvidia drivers in the repository for this build are nvidia-gfx-96, while vanta seem to supported up to nvidia-gfx-71. After some hours of following tutorials, fiddling around and testing I managed to install the 71-drivers. But, the nvidia-settings require nvidia-xconfig to be around, which is embedded with later driver-builds but not with 71.
Fortunately I found a tar.gz at this page, so I downloaded it... but -and here is finally my question- where am I supposed to extract it to and are there other things I should do to get it working? Or, if I'm overcomplicating things, feel free to give me directions on what to do. Unfortunately I couldn't find anything on Ubuntu 9.10 and nvidia-gfx-71, hence I'm messing around for hours by now.
View 4 Replies
View Related
Aug 31, 2010
I spent quite a lot of time jumping from one thread to another trying to fix a problem with my NVIDIA drivers in Lucid. I was getting the error message on startup: NVIDIA: Failed to load the NVIDIA kernel module ...Failed to load module "nvidia" (module-specific error, 0) No drivers available".
After a lot of trial and error, this is what worked for me (I have updated this thread following [URL]):
- Download the latest NVIDIA driver from www.nvidia.com/page/drivers.html
- In the terminal cd to the directory where you downloaded the driver package (e.g., $ cd Downloads)and make it executable (e.g., $ sudo chmod +x ./NVIDIA-Linux-x86_64-256.53.run)
- Edit blacklist.conf $ gksu gedit /etc/modprobe.d/blacklist.conf
and add the following lines to the end of the file:
#recommended by http://ubuntuforums.org/showthread.php?t=1467074
blacklist vga16fb
blacklist nouveau
blacklist rivafb
[Code].....
View 2 Replies
View Related
Dec 12, 2010
I have Ubuntu 10.10. I want to install the from the nvidia website. The propriatary drivers from Ubuntu aren't great. I have downloaded the file, but what do I do with it now? How can I get it installed?
View 5 Replies
View Related
Jun 9, 2011
Using online Debian guide, installed latest nvidia-current, glx etc which seems to be 195.xx Machine boots to GUI but monitor setting menu doesnt respond nor is there an nvidia specific one. xorg.conf shows 'nvidia' driver but I suspect I am still on 'nouveau' since the synapatic package manager doesn't show an nvidia xserver-xorg-video choice.
Second question, any trailheads for using wheezy based drivers (i.e. nvidia's latest 270.xx) with squeeze?
View 14 Replies
View Related
Jan 7, 2010
I can't find kmod so I'll go for the Nvidia installer from [URL]. I tried to run it Quote: su -c 'sh NVIDIA-Linux-x86-XYZ.AB.pkg1.run' but it wants me to kill xserver. How can I do that? " gdm stop" will kill Xserver too? How will I start it again?
View 3 Replies
View Related
Jan 22, 2010
I installed Fedora 12 nowdays and tried to install the driver as Leigh posted in here: [URL]...Well i had some depadency trouble by installing kmod-nvidia and xorg-x11-drv-nvidia-libs.i686. I enabled rpmfusion repo of course. I don't have anything isntalled just the base programs what fedora installs. I updated the kernel and installed kernel-devel aswell.
This is what i got:
Code:
[root@Nuclear pinter]# rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
Retrieving http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm
Retrieving http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
warning: /var/tmp/rpm-tmp.fNroQP: Header V3 DSA signature: NOKEY, key ID 49c8885a
warning: /var/tmp/rpm-tmp.zdIa6C: Header V3 DSA signature: NOKEY, key ID b1981b68
[Code]...
View 1 Replies
View Related
Jun 9, 2010
opensuse 11.2 ,my monitor keeps going to sleep or somthing and this is a problem when im watching videos,ive set screens power setting but they dont seem to be whats doing it.im running a nvidia gtx260 and have installed nvidia drivers for series 6 and up.dont know if its the divers or somthing else.
View 9 Replies
View Related
Jul 29, 2010
Does somebody know if the NVIDIA driver from NVIDIA repository supports Cuda?
View 2 Replies
View Related
Apr 3, 2011
I own an ASUS N61JV-X2 notebook PC that has an Intel HD IGP, nVIDIA GeForce GT 325M GPU, and nVIDIA Optimus technology. I am running OpenSUSE 11.4 64 bit with GNOME. I used to be a former Ubuntu user. I used Ubuntu 10.10 Maverick Meerkat 64 bit. In Ubuntu, it was not recommended that I install the proprietary nVIDIA binary drivers because it would cause me to log into a TTY console upon reboot.
nVIDIA states that they have no plans to support Optimus technology in Linux at any time. Would it be recommended that I install the proprietary nVIDIA binary drivers in OpenSUSE 11.4 64 bit with GNOME? Will I get the same problem as in Ubuntu? How do I do this?
View 1 Replies
View Related
